LEDLITES USAA Division of Renewable Energy and Power, Inc.

3395 W. Cheyenne Ave. Unit 111North Las Vegas, NV 89032

Phn: (702) 294-0111Fax: (702) 567-0111

email: sales@r-eap.com www.r-eap.com

Green Energy Solutions

LEDLITES USA

20 Years Experience in Residential, Commercial & Military LED-Array

Lighting

Design, Manufacture & Distribute Innovative Indoor and Outdoor LED Lighting Products

LEDLITES USA

Conversion and New Installations

LEDLITES USA

Governmental Contractor

FED BIZ OP CONTRACT EXAMPLES

LED TAXIWAY LIGHTING FIXTURESSolicitation Number: FA8056-11-R-0001Agency: Department of the Air ForceOffice: Air Force Materiel Command

LED FLOOD LIGHT FIXTURES FOR SHIPSolicitation Number: EA133M-11-RA-1192Agency: Department of CommerceOffice: National Oceanic and Atmospheric Administration (NOAA)

LED LIGHTSSolicitation Number: W91A2K-1139-1032Agency: Department of the ArmyOffice: Army Contracting Command

LEDLITES USA

LEDLITES USA

LED CONVERSION With an extensive background in the design and manufacture of military

simulation instrumentation, LEDLite USA is uniquely situated to convert existing area lighting to state-of-the-art LED. Based on the existing fixture, LEDLites designs a custom reflector and heat sink to dissipate generated and ambient heat to assure the LEDs fully meet their rated life. The design also provides the precise ground lighting pattern, intensity and color requested by the customer. The changeover is a simple matter of removing in place the existing interior works and replacing it with the new LED lighting unit that installs with just three wire nuts.

Marketing Advantage

World class partnerships with vendors/suppliers also contribute to the company’s product reliability. LEDLites USA both leverages the technology of suppliers and develops technologies and intellectual properties of its own. Although LEDLites USA has the flexibility to use several different suppliers of LED chips, it has developed special pricing contracts with primary suppliers. Flexibility of design protects us from becoming someone else’s captive customer with high pricing.

LEDLites USA is committed to building a leadership position in the commercial Solid State Lighting (SSL) market through ongoing technology development. This continuing improvement of the cost/benefit equation reduces the commoditization of the market segments the company serves and preserves high-margin returns.

LEDLITES USA

Design & Manufacturing AdvantageLEDLites USA is building to be a market leader in LED light fixtures for both the new and conversion sectors. LEDLites USA utilizes its superior knowledge in the field of power supplies and thermal management as well as its modular construction technology to be a leader the LED revolution in the LED lighting industry. Employing a combination of partnerships with established corporations, green building groups and relationships with federal, state and local governments, LEDLites USA is poised to become synonymous with the term "LED light fixture."

Our unique design approach gives LEDLites USA a platform for the Sun Harvesting, Motion Detection and Light Level Selection options. These features provide LEDLites USA with an economic advantage as the energy savings afforded by these features can be significant – 20% to 30% above the normal savings provided by any competitive LED light fixtures. These technological advantages will be leveraged to the greatest extent possible.

LEDLITES USA

Competitive Advantage

LEDLites USA has a unique selling proposition as the first company to enter the LED Lighting market with an extensive background in the design and manufacture of power supplies and associated thermal management. For more than 20 years, LEDLites USA through its parent company has been a leader in the field of high-intensity LED backlighting for commercial illumination and military simulation instrumentation.

The current manufacturers of commercial lighting fixtures are basically assemblers of various metal, plastic and glass parts to form the fixture itself. The bulbs are manufactured by a third party as are the ballasts used in fluorescent lighting. There is no history of electronic technology these companies can refer to in the development of LED light fixtures.

A key to the success of LEDLites USA is the performance and reliability of its light fixtures due to its expertise in thermal management and power supply design.

LEDLITES USA

Key Goals

LEDLites USA uses its core skills in thermal management, power supplies, system packaging, and design and manufacturing to develop and advance technology for two key purposes:

To develop product solutions that maintain a leadership position over its competitors based upon superior cost-benefit to its customers, as well as greater product functionality.

To lower unit cost while maintaining the key domestic work-force through the advancement of manufacturing & assembly technology & processes.

LEDLITES USA

LED Lighting Advantages

• Efficiency: LEDs emit more light per watt than incandescent light bulbs. Their efficiency is not affected by shape and size, unlike fluorescent light bulbs or tubes.

• Color: LEDs can emit light of an intended color without using any color filters as traditional lighting methods need. This is more efficient and can lower initial costs.

• Size: LEDs can be very small (smaller than 2 mm2) and are easily populated onto printed circuit boards.

• On/Off time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness in under a microsecond. LEDs used in communications devices can have even faster response times.

• Cycling: LEDs are ideal for uses subject to frequent on-off cycling, unlike fluorescent lamps that fail faster when cycled often, or HID lamps that require a long time before restarting.

• Dimming: LEDs can very easily be dimmed either by pulse-width modulation or lowering the forward current.

LEDLITES USA

LED Lighting Advantages, Con’t

• Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.

• Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt failure of incandescent bulbs.

• Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.

• Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile.

• Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.

LEDLITES USA

LEDLITES USA

Government Legislation

Federal legislation includes the energy bill passed December 2007, confirmed July 15, 2011, making most incandescent lighting prohibited for sale in stores by the year 2012 in favor of Energy Star products which for lighting includes Compact Fluorescent Light (CFL) bulbs and LED lights.

CFLs have several drawbacks. Far more toxic (using mercury) than LED lighting, discarded in a landfill CFLs leach methyl-mercury into the air and water with disastrous results. For example, the amount of mercury contained in just 25 standard fluorescent lamps can pollute a 20 acre lake making the fish in the lake unsafe for human consumption. Additionally, CFL emits ultraviolet radiation which, of course, is associated with heightened risk of skin cancer.

LEDs are twice as efficient, have no toxic materials and do not emit any ultraviolet radiation, compelling reasons to anticipate that LEDs will be the lighting of choice as costs come down with the expansion of the market.

Tax Incentives

The federal Energy Policy Act of 2005 offers tax incentives to energy-efficient commercial buildings. Any building that can cut its lighting power density by 25-50 percent is eligible to receive a tax reduction of 60-cents per square foot. By converting to LEDs, four times more efficient than incandescent lighting and twice as efficient as CFLs, companies can reduce their light electric output by 80 percent. Not only do LED users see an immediate and significant reduction in their energy bills, they also receive government endorsed tax incentives for making their buildings more energy efficient.

Additionally, the American Recovery and Reinvestment Act of 2009 includes billions of dollars that may be used for green building, retrofitting, energy efficiency and renewable energy projects, including those in federal facilities; states, localities, and tribal areas; schools; and housing.

LEDLITES USA

LEDLITES USA

LEDLites USA Inc. Phn: (702) 294-0111 A Division of Renewable Energy and Power Inc. Fax: (702) 567-0111 3395 W. Cheyenne Ave. Unit 111 email: sales@r-eap.com N. Las Vegas, NV 89032 www.r-eap.com