ledeen actuator and control solutions - oil & gas industry · 2016-10-12 · 2 cameron’s...

LEDEEN Actuator and Control SolutionsInnovative solutions for pneumatic, hydraulic, gas-over-oil, direct gas and subsea applications.

LEDEEN ACtuAtor AND CoNtroL SoLutIoNS

Introduction ................................................................................................. 2

Quarter-turn Core Products

Configurations....................................................................................... 3

Modular Assembly ................................................................................. 4

Frame Design ......................................................................................... 5

Power Cylinder and Spring Cartridge Design .......................................... 6

Override Options and Certifications ....................................................... 7

Core Product Types

• Quarter-turnPneumatic .................................................................... 8

• Quarter-turnPneumatic(VASeries) ................................................... 9

• Quarter-turnHydraulic ...................................................................... 10

• Quarter-turnHydraulicSubsea .......................................................... 11

• Quarter-turnGas-over-oil .................................................................. 12

• Quarter-turnDirectGas .................................................................... 13

Linear Core Product types

• LinearPneumatic .............................................................................. 14

• LinearHydraulic ................................................................................ 15

• LinearGas-over-oil ............................................................................ 16

• LinearSubsea ................................................................................... 17

Table of Contents

Controls and Accessories

• Low-pressurePneumatic .................................................................. 18

• HydraulicSelf-contained ................................................................... 19

• HydraulicPowerUnit ........................................................................ 20

• High-pressureGas. ............................................................................ 21

• ElectronicLinebreak .......................................................................... 22

• Position-monitoringSwitches ............................................................ 23

TechnologyandQuality ................................................................................ 24

CAMSERVServicesforActuationandValves ................................................ 25

1

2

Cameron’sLEDEEN®actuatorandcontrolsolutionshavebeenconsistentlyprovidingexceptional

valveautomationperformancetotheoilandgasindustryformorethan60years.Startingin

1948,arobustproductdesignwasintroducedbaseduponsolidengineeringprincipleswitha

commitmenttocontinuousimprovement.Eachsuccessiveyearwasguidedconsistentlybythose

foundationalprincipleswhilegainingproductexposuretoawiderangeofoperationalconditions.

Meanwhile,anextensiveaccumulationoffirst-handapplicationexperiencewasbeingestablished.

ThisresultedinCameron’sabilitytoprovidefield-provensolutionsthatareknowntobefitfor

purpose and reliable.

There’snoshortcutorsubstitutionforvaluableproductknowledgeobtainedthroughyearsof

successfuloperationsinthebrutalenvironmentalconditionsofdesert,arctic,offshoreorsubsea

applications.Relyinguponthisextensiveglobalexperienceandapplyingitduringtheevaluation

ofeveryrequirementisacommitmenttobestpracticesthateverycustomerbenefitsfromwhen

workingwithCameron.Whethertheneedforvalveautomationisconsideredbasicorcomplex,

upstreamtodownstream,onshoretooffshore,everyapplicationdeservesthebenefitsthatour

LEDEENactuatorandcontrolsolutionscanprovide.

LEDEEN Actuator and Control SolutionsSoLID ENgINEErINg PrINCIPLES. FIELD-ProvEN ExPErIENCE. CuStomEr-CoNFIDENt SoLutIoNS.

Quarter-turn Core Products

PneumaTiC

HydrauliC

Gas-over-oil

Spring Return

Spring Return

Double Acting Double Acting

Double Acting

Double Acting

direCT Gas

3

CoNFIgurAtIoNS

Consistent and Flexible

Consistentengineeringdesignandefficientmodular

assemblyallowsincreasedoperationalflexibilitytobe

achieved.Double-acting,springfailclose/openormanual

overrideoperationsarecombinationsthatarereadily

obtainableonthelow-pressureair,high-pressuregasor

hydraulicproducts.Thismaintainsproductconsistency

throughoutanyprojectrequirement,regardlessofvalve

size, class, actuator supply medium, pressure, or actuator

function(DA/SR)requirements.Asaresult,allproductscan

besafelyandconfidentlyoperatedbypersonnel.Inaddition,

theconsistentdesignprovidesasignificantreductioninthe

quantityofrecommendedsparepartsandsealkits,which

reducescostswithinmaintenanceprograms.

Spring Cartridges for Mechanical Fail-safe Operation

SY Series Frame

Power Cylinders for Natural Gas Supply

Power Cylinders for Hydraulic Supply

Power Cylinders for Compressed Air Supply

moDuLAr ASSEmbLy

GS Series Frame

HydraulicOverride

SymmetricYoke

CantedYoke

Jackscrew Override

4

Standard Features

• Scotchyokemechanismgeneratespowerfulopening

andclosingtorqueoutputs

• Steelfabricatedframeprovidesruggedfoundation

ofmodularassemblies

• Chrome-platedsideloadbarwithguideblockfor

effectiveeliminationofpistonroddeflection

• Bronzebushinginterfacesprovidelow-frictionsupportof

sliding and rotating components

• Aluminumbronzeslidingblocksforalow-friction,

low-stresspinconnection

FrAmE DESIgN

Symmetric yoke Design

• Providesconventionaltorqueoutput

• Equivalentbreakandendtorquevalues

Canted yoke Design

• Providesuniquetorqueoutput

• Increasesbreakandreseattorquevalues

Fabricated Frame

Torq

ue O

utpu

t

Torq

ue O

utpu

t

Valve Position Valve PositionOpen OpenClosed ClosedRun Run

5

PowEr CyLINDEr AND SPrINg CArtrIDgE DESIgN

aCTuaTor series

gS and Sy-22˚ F to 212˚ F(-30˚ C to 100˚ C)

TemPeraTure ranGe Pressure ranGe

40 to 3000 psig(3 to 207 barg)

sTandard ProduCT CHaraCTerisTiCs

Power Cylinder Standard Features

• Steelcylinderassemblies,eachdesignedspecifically

forthesafepressurecontainmentoflow-pressure

compressedair,high-pressuregasorhigh-pressure

hydraulicsupplymediums(refertopages8,10,12and

13forspecificpressureratings)

• Nickel-platedcylinderIDensuresexcellentsealingsurface

withsuperiorcorrosionresistance

• BunaO-ringsusedforzero-leakagepistonoperationwith

alow-pressuresupplymedium,whileBunaQuadrings

areusedwithahigh-pressuregasorhydraulicsupply

medium

• Composite guide band on piston provideslow-friction

guidance and support

Spring Cartridge Standard Features

• Steelspringcartridgeisfullyenclosedfrom

environmental conditions

• Epoxy-coatedprestressedspringsprovide

consistentperformancewithcorrosionprotection

• Seal-weldeddesignconstructionprovidesincreased

personnelsafety

Spring Cartridges for Mechanical Fail-safe Operation

Power Cylinders for Hydraulic and Natural Gas Supply

Power Cylinders for Compressed Air Supply

6

Certifications

Cameron’sLEDEENactuatorscomplywithmany

industry standards:

• ISO9001:2008,Quality

• PED97/23/CE2002,Quality

• SI825,1996PipelineSafety

• IEC61508:2010,Integrity(TUV/SIL3)

ovErrIDE oPtIoNS AND CErtIFICAtIoNS

• Jackscrewwithhandwheelforoperatingany

double-actingorspring-returnactuatorup

throughtheSY10model

• Hydraulicpumpforeasyoperationofall

actuator sizes and configurations

• Gearwithhandwheelprovidesdualfunctionof

valvemountinghardwarewithoverridecapability

foranymodeldouble-actingorspring-return

actuator

Pneumatic Spring Return with Jackscrew Override

Pneumatic Double Acting with Jackscrew Override

Pneumatic Double Acting with Hand Pump Override

7

typical Application

Quarter-turnpneumaticactuatorsareusedforon/offor

modulatingcontrolofanyball,plugorbutterflyvalve

utilizing compressed air, natural gas or nitrogen

actuator supply.

Standard Features

• Allmodelsavailableasdoubleacting

or spring return

• Torqueoutputsto5,700,000in-lb(644,000Nm)

• Openandclosetravelstops,±3degreesminimum

• Localpositionindication

• Refertopages5and6forframe,powercylinder

andspringcartridgefeatures

• SuitableforSIL3environments

Available options

• Jackscrew,hydraulicandgearoverrides

(refertopage7)

• Mechanicalpartialstroketestdevice

(localorremoteoperation)

• Fluorosiliconesealsforlow-temperature

applications:-76˚F(-60˚C)

• Viton®sealsforhigh-temperature

applications:392˚F(200˚C)

• Ultra-lowtemperaturematerials:-76˚F(-60˚C)

• Refertopage18forpneumaticcontroloption

QuArtEr-turN PNEumAtIC

aCTuaTor models





Quarter-turn Pneumatic

Pneumatic Spring Return

8

Core Product Types

typical Application

Quarter-turnpneumaticactuatorsareusedforon/offor

modulatingcontrolofanyball,plugorbutterflyvalveutilizing

compressed air, natural gas or nitrogen actuator supply.

Standard Features

• Availableasdoubleactingorspringreturn

• Torqueoutputsto9700in-lb(1100Nm)

• Forgedsteelbody,pistonandendcaps

• Steelcylinderswithnickel-platedI.D.

• Symmetricyoke

• Aluminumbronzeslidingblocksinyoke

• Compositeguidesleeveonpiston





Available options

• Stainlesssteelcylinders



• Vitonsealsforhigh-temperatureapplications:

392˚F(200˚C)

• Jackscrewwithhandwheelforoperatinganydouble-acting

orspring-returnmodel

• Gearwithhandwheelprovidesdualfunctionofvalve

mountinghardwarewithoverridecapabilityforany

double-actingorspring-returnmodel

QuArtEr-turN PNEumAtIC (vA SErIES)

aCTuaTor model

vA-22˚ F to 212˚ F(-30˚ C to 100˚ C)




9

typical Application

Quarter-turnhydraulicactuatorsareusedforon/offor

modulatingcontrolofanyball,plugorbutterflyvalve

utilizinghydraulicactuatorsupply.

Standard Features

• Allmodelsavailableasdoubleactingor

spring return




• Refertopages5and6forframe,powercylinder

andspringcartridgefeatures


• Refertopages19and20forhydraulic

control options

Available options

• Jackscrew,hydraulicandgearoverrides(referto

page7)

• Mechanicalpartialstroketestdevice(localor

remoteoperation)

• Fluorosiliconesealsforlow-temperatureapplications:

-76˚F(-60˚C)


392˚F(200˚C)


QuArtEr-turN HyDrAuLIC

aCTuaTor series



145 to 3000 psig(10 to 207 barg)


10

aCTuaTor model

Deepwater Series

Pressure ranGe

150 to 3000 psig(10 to 207 barg)


QuArtEr-turN HyDrAuLIC SubSEA

typical Application

Foron/offcontrolofanysubseaball,plugorcheckvalveina

submergedenvironmentbeyond500ft(152m)waterdepth.

Standard Features



• Scotchyokemechanism

• Pressure-compensatedfordeepapplications

• 100%RXandPTtestedwelds

• Noexternaltierods


• Localtactilepositionindicator

• Spoolpiecewithadjustablepositionlocators

Available options

• Manualoverride

• ROVoverride

• Microswitchforopen/closeindication

• Positiontransmitterfor0%to100%travelindication

suBmersion (waTer dePTH)

> 500 ft (152 m)

Shallow-water Series ≤ 500 ft (152 m)

typical Application

Foron/offcontrolofanyquarter-turnoperatedvalveina

submergedenvironmentto500ft(152m)waterdepth.

Standard Features and benefits


• Torqueoutputto5,700,000in-lb(644,000Nm)

• Openandclosetravelstopsprovide±3degreesminimum

• Scotchyokemechanism

• Bunapistonseal

• Compositeguidebandonpiston

• Epoxy-coatedsprings

• Pressurecompensator

Available options

• Manualoverride

• ROVoverride

• Microswitchforopen/closeindication

• Positiontransmitterfor0%to100%travelindication

11

typical Application

Quarter-turngas-over-oilactuatorsareusedforon/off

controlofanynaturalgastransmissionballorplugvalve

utilizingahigh-pressurenaturalgasornitrogenactuator

supply.

Standard Features





• ASME/PEDgas-over-oilpressurevesselswithdipstick,

filterandadjustablespeedcontrols

• High-pressureratedcontrolsforlocal,remoteand

automaticoperation(refertopages21and22)

• Hydraulicmanualoverride

• Refertopages5and6forframeandpower

cylinderfeatures


Available options


-76˚F(-60˚C)


392˚F(200˚C)


• ASME/PEDemergencystoragetank

QuArtEr-turN gAS-ovEr-oIL

aCTuaTor series



145 to 1500 psig(10 to 104 barg)


12

typical Application

Quarter-turndirectgasactuatorsareusedforon/offcontrol

ofanynaturalgastransmissionballorplugvalveutilizinga

high-pressurenaturalgasornitrogenactuatorsupply.

Standard Features





• Hydraulicmanualoverridewithreservoirfilter,

dipstickandadjustablespeedcontrols

• High-pressureratedcontrolsforlocal,remoteand

automaticoperation(refertopages21and22)

• Refertopages5and6forframeandpower

cylinderfeatures


Available options


-76˚F(-60˚C)


392˚F(200˚C)



• Spring-returnmodels

QuArtEr-turN DIrECt gAS

aCTuaTor models



145 to 1500 psig(10 to 104 barg)


13

typical Application

Linearpneumaticactuatorsareusedforon/offor

modulatingcontrolofanygatevalveorrisingstemball

valve utilizing compressed air, natural gas or nitrogen

actuator supply.

Piston Actuator Standard Features

• Allmodelsavailableasdoubleactingorspringreturn

• Thrustoutputsto4,400,000lb(19,572,000N)


• Refertopage6forpowercylinderandspring

cartridgefeatures



Available options

• Mechanicaljackscrewoverride



-76˚F(-60˚C)


392˚F(200˚C)


LINEAr PNEumAtIC

aCTuaTor model

LP-22˚ F to 212˚ F(-30˚ C to 100˚ C)




14

linear Core Product Types

typical Application

Linearpneumaticactuatorsareusedforon/offormodulating

controlofanygatevalveorrising stem ball valve utilizing a

hydraulicactuatorsupply.

Standard Features

• Allmodelsavailableasdoubleactingorspringreturn



• Refertopage6forpowercylinderandspring

cartridgefeatures


• Refertopages19and20forhydrauliccontroloptions

Available options

• Mechanicaljackscrewoverride



-76˚F(-60˚C)


392˚F(200˚C)

• Operatingpressureto5000psig(345barg)


LINEAr HyDrAuLIC

aCTuaTor model

LH-22˚ F to 212˚ F(-30˚ C to 100˚ C)


145 to 3000 psig(10 to 207 barg)


15

typical Application

Lineargas-over-oilactuatorsareusedforon/offcontrol

ofanynaturalgastransmissiongatevalveutilizinga

high-pressurenaturalgasornitrogenactuatorsupply.

Piston Actuator Standard Features

• Availableasdoubleacting



• ASME/PEDgas-over-oilpressurevesselswithdipstick,

filterandadjustablespeedcontrols

• High-pressureratedcontrolsforlocal,remote

andautomaticoperation(refertopages21and22)


• Refertopage6forpowercylinderfeatures


Available options




392˚F(200˚C)



LINEAr gAS-ovEr-oIL

aCTuaTor model

LH-gH-22˚ F to 212˚ F(-30˚ C to 100˚ C)


145 to 1500 psig(10 to 104 barg)


16

typical Application

Linearsubseaactuatorsareusedforon/offcontrolofany

subseagatevalveutilizingahydraulicactuatorsupply.

Standard Features



• Pressure-compensatedfordeepapplications

• 100%RXandPTtestedwelds

• Noexternaltierodsortubing

Available options

• ROVoverride

• Diverintervention

• In-househyperbarictesting

LINEAr SubSEA

Adapter Piece

Hydraulic Cylinder

aCTuaTor model Pressure ranGe

mytilus150 to 3000 psig(10 to 207 barg)


17

typical Application

Low-pressurepneumaticcontrolsareusedforlocal,remoteor

automaticcontrolofanylow-pressurepneumaticactuator.

Standard Features

• Compactmanifolddesign

• 316stainlesssteelconstruction

• Highflowcapacity

• Acceptsmultiplesolenoidbrands

• ApprovedtoNEMAandATEXstandards

• Controldouble-actingandspring-returnactuators

• Adaptableforcustomapplications

• FKMfluorocarbonVitonseals


Available options

• Pilotorelectricalcontrolsignal

• ASCO,MidlandorVersasolenoid

• Leverorpalmbuttonmanualoperator

• Latchingdetentandmanualresetdevices

• Lowpowerconsumption

• EPDMsealsforlow-temperatureapplications

Low-PrESSurE PNEumAtIC

AUX PORT

CYLINDERPORTS

LEGEND:

ElectricPneumatic

Lockable stop valve

Check valve

Filter

Pressure regulator

Pressure gauge

Junction box

Solenoid valve

Pneumatic piloted valve

Flow control valve

8

9A

9B

9B9A

8

7

6

5

4

3

2

1

1 2 3 4

5

6

7

ConTrol models

Local, remote and Automatic

Pressure ranGe


-40˚ F to 200˚ F(-40˚ C to 93˚ C)

TemPeraTure ranGe


18

Controls and accessories

typical Application

Hydraulicself-containedcontrolsareusedforprovidinga

reliablevalveshutdowncapabilitywhenanexternalpower

sourcefortheactuatoriseithernotavailableor

not dependable.

Standard Features

• Modelsavailablewith3000psigand5000psig

pressure outputs

• Corrosion-resistantanodizedaluminumwithstainless

steel internals

• Manualarmingvalvewithbrightredcoloredlocal

emergencyshutdowntripfunction

• Thermalcompensationforhigh-andlow-pressurecircuits

• IndependentlyadjustablepilotvalvesforPSHandPSL

• Stainlesssteelpressuregaugesforhigh-andlow-pressure

circuits

• Easy-viewliquidlevelgaugeattachedtostainless

steel reservoir

Available options

• Lowpowerconsumptionsolenoidforremotetrip

• Lockablestainlesssteelenclosure

• Fusibleplug

HyDrAuLIC SELF-CoNtAINED

ConTrol models

Self-contained

Pressure ranGe

3000 psig and 5000 psig(207 barg and 345 barg)

-50˚ F to 212˚ F (-45˚ C to 100˚ C)

TemPeraTure ranGe


Typical Self-contained Assembly

19

typical Application

Thehydraulicpowerunitprovidesareliablehigh-pressure

hydraulicoutputasapowersourceforhydraulicactuators.

Electric motor operated

• Availableformountingontheactuatororremotely

Centralized

• Providespowerforalargequantityofactuators

simultaneously

• Hydrauliccontrolsforallactuatorsarecentralized

Portable gasoline or Diesel operated

• Mobilepowersourceforindividualactuator

requirements

• Flexiblehoseswithquickdisconnects

Solar operated

• Availableforsingleormultiactuatorrequirements

• Completelyself-contained

• Emergencystoragecapability

Power uniTs

Electric, gasoline, Diesel or Solar

-40˚ F to 212˚ F(-40˚ C to 100˚ C)


145 to 3000 psig(10 to 207 barg)

HyDrAuLIC PowEr uNIt

20

typical Application

High-pressuregascontrolsareusedforlocal,remoteor

automaticcontrolofanyhigh-pressuregasactuatorutilizing

a natural gas or nitrogen supply.

Standard Features

• Compactdesignwithweatherproofenclosure

• Allcomponentshavehigh-pressurerating

• Three-stagegasfilter /conditioner

• Easyoperationofmanualleversthroughout

pressure range

• Durablemarinegradematerials

• Convertsfromlocaltoremoteorautomaticoperation

Available options

• Electricremote

• Electricfail-safe

• Emergencyshutdown

• High/ low-pressureshutdown

• Linebreak(diaphragm,digitalorelectronic)

• Stationbypass

• Variousconfigurationsorspecialrequirements

HIgH-PrESSurE gAS

ConTrol models

Local, remote and Automatic

-76˚ F to 212˚ F(-60˚ C to 100˚ C)


145 to 1500 psig(10 to 104 barg)


21

typical Application

Electroniclinebreakcontrolsareusedformonitoringpipeline

operatingconditionstoquicklydetectpressuretrending

towardabnormallyhighorlowrate-of-drop

valuesandaccuratelymonitorthosetrendsforan

automaticshutdownresponsewhenpre-establishedset

pointsarereached.

Standard Features

• Continuouspipelinepressuremonitoringanddata

acquisition

• InitiatesvalveclosurewhenPSH,PSLorRODlimitsare

reached

• CSAcertifiedforClass1,Div.2hazardouslocations

• Weather-tightNEMA4enclosuresupportsintegral

battery

• Enclosureallowsmountingofsingle-ordual-pressure

transmitters

• User-assignabledataforlocaldisplayonlarge-character

LCDscreen

• RS232andRS485communicationconnections

Available options

• Solarpowered(panelwithallassociatedcircuit

accessories)

• Dual-pressuretransmittersforredundancyordP

monitoring

• ExpansionboardforadditionalI/Oconnections

ELECtroNIC LINEbrEAk

ConTrol models

Safemaster-40˚ F to 140˚ F (-40˚ C to 60˚ C)


Pressure transmitter dependent


Line Monitor Screen Display

22

typical Application

Position-monitoringswitchesareusedforremoteindication

ofanyrotaryrequirements;primarilyforquarter-turn

valve actuators.

Standard Features

• Zytel®, aluminum or 316 SS enclosures

• IngressprotectionratedIP67

• Explosion-proofratedExdIIcT6IP67

• ApprovedtoATEXandCENELECstandards

• 12-contactterminalstrip

• High-visibilitydomeindicator

• SPDTmechanicalswitches

• NPTormetriccableentries

• Namurmounting

• Easy-to-setcoloredcams

Available options

• IngressprotectionratedIP68

• DPDTmechanicalswitches

• Proximityswitches

• Positiontransmitter

PoSItIoN-moNItorINg SwItCHES

swiTCH model

PmS-67˚ F to 185˚ F(-55˚ C to 85˚ C)

TemPeraTure ranGe indiCaTor Colors

red/yellowred/green

PMS 100

PMS 300

PMS 500


23

Asestablishedleadersinactuationtechnology,Cameron’s

LEDEENbrandoffersacompletelineofactuationand

controlsolutionsacrossarangeofflowcontrolapplications.

Throughtechnologicaladvancements,LEDEENactuators

deliverarangeofcapabilities,powerandperformancein

bothquarter-turnandlinearconfigurations.

Forlocal,remoteorautomaticoperation,ourLEDEENline

featuresinnovativeproductswithintelligentactuation

technologydesignedforsomeoftheworld’smost

demanding applications.

Specialized Equipment

• Toverifyperformanceinactualsubseaworking

conditions,LEDEENactuatorsgothroughstringent

hyperbarictestingproceduresinstimulatedenvironments

toensureallproductsmeetandexceedindustry

standards

• CameronhasthecapabilitytovalidateLEDEENactuator

torqueoutputto13,300,000in-lb(1,500,000Nm)

technology and Quality

Although checked for accuracy at the time of printing, Cameron’s commitment of continuous improvement and innovation may have resulted in product enhancements or modifications not currently shown.

24

25

startup and Commissioning

Ourexpertsunderstandthateachprojectisunique.That’swhyCameron’sCAMSERV™

Serviceshelpfacilitatecommissioningandstartupactivities.

• Integratedsolutions,onsiteoratourglobalservicecenters

• Increasedequipmentandproductperformance

• Theshortestpossibletrouble-freestartupforyourcriticalassets

spare Parts and asset management

Cameronofferstheassetsandexpertisetocoverallaspectsofvalvemanagement.

• FullinventoryofqualityexactOEMpartsandspares

• Completeassetriskandcriticalityassessments

• Comprehensiveinventoryofyourassets,includingacompleterecommended

spare valves and parts list

operational support

Cameron’sabilitytoaddressvalverequirementsinthefieldisareflectionofour

commitmenttolife-of-assetsupport.

• Innovativeassetmanagementsolutions

• Trouble-freeinstallation,startupandoperations

• Supportfromcommissiontooperation–extendingthroughall

phasesofavalve’slifecycle

• Extensiveinventoryofsparevalvesandparts

Cameron’sCAMSERVsite

managementmitigatestherisk

ofprojectdelaysbyidentifying

issuesintheconstruction

process prior to valve installation

to ensure valve integrity.

CAmSErv Services for Actuation and valveswE buILD It. wE bACk It.

©2012 Cameron | LEDEEN is a registered trademark of Cameron. CAmSErv is a trademark of Cameron. total valve Care is a service mark of Cameron. viton and Zytel are registered trademarks of E.I. DuPont De Nemours & Company | SwP 2m 12/13 AD00267v

3250 briarpark Drive, Suite 300

Houston, tx 77042

uSA

toll Free 1.800.323.9160

via gandini 427058 voghera, PvItalytel 39.0383.343311

visit us at www.c-a-m.com/LEDEEN

HEALT

H S

AFE

TY A

ND ENVIRONMENTAL EX

CELLEN

CE

CAMERON

Hse Policy statementAt Cameron, we are committed ethically, financially and personally to a working environment where no one gets hurt and nothing gets harmed.

ledeen actuator and control solutions - oil & gas industry · 2016-10-12 · 2 cameron’s...

Documents