led wall washer - g2glighting.com · instruction of led wall washer led wall washer this product is...
TRANSCRIPT
LWW-5-36P
INSTRUCTION OF LED WALL WASHER
LED WALL WASHER
This product is mainly used for decorating and highlighting in building frame, garden, etc. It can work in independent mode and DMX mode, which can generate various color changing effects, such as flashing, fading, steady ,seven color jumping synchronously etc. DMX256 class gray degree dimmer, DMX programable(thousands of effects. available if many lights being connected together);
A. Specification:erutcurtS :.1-A
Material of Shell: Aluminum alloy/6063Rotary angle: 140°Input Voltage: 90~305V ACOperating Voltage: 24V DCProtection Rating: IP65Operating Temperature: -20℃-40℃
A-2.Model Configuration Table
B. Working Mode:B-1.Independent Mode:Choose the build-in programs via the buttons on the end cover.B-2.DMX Mode:International standard DMX512 signal(IP68 connector).B-3.Master/Slave Mode:Auto online and synchro working.
C. Function & SetupC-1. DMX Addressing
B-2. Mode DMX: signal de norme internationale DMX512( connecteur Ip68).B-3. Mode maître / esclave: Auto en ligne et travail synchro.
When the digital LED is not flashing, press A, digital LED begin to flash, press A once, active digital LEDs moves backward, you can start to edit the second digital LED;Press B, the corresponding flash digital LED increase one bit(the values between 1 to 9);
015~100:sserddA XMD dilaV ** *
B-1.Mode indépendant: Choisissez les programmes de construction en passant par les boutons sur la couverture de fin
Lorsque le voyant numérique ne clignote pas, appuyez sur A, numérique LED commence à clignoter, appuyez une fois, actifs LED numériques se déplace vers l'arrière, vous pouvez commencer à éditer le second LED numérique; Appuyez sur B, le numérique flash LED correspondant augmenter un bit (les valeurs entre 1 à 9).
G2GLWW-5 SeriesITEM NO.:
Model No. LED
QuantityPower
ConsumptionBeamAngle Size Weight
G2GLWW-5-18P 18 20 WATTS o o o10 /30 /45 L580xW(147/78)xH(70/118)mm 2.80kg±5%
G2GLWW-5-36P 36 40 WATTS o o o10 /30 /45 L1240xW(147/78)xH(70/118)mm 5.5kg±5%
R/G/B/CW/NW/WW/RGB
R/G/B/CW/NW/WW/RGB
Color
G2GLWW-5 SeriesITEM NO.:
C-3.Master/Slave ModeChoose any one light as the master for attaining auto online function,the operations are as below:firstly,set the address of master as 001,others are set as slave(address can be any one except 001); Change function
ylsuonorhcnys krow lliw sthgil lla neht,thgil )100(retsam eht f ;o
C-4.When pressing button,please wait for about 10 sec,then you can exit the mode of adjustment function,the digital LED stop flashing and data recorded.
D.Photometric ParametersD-1. Cadela Distribution
LWW-5-36P
X refer to functions(the value between 1 to C),Y refer to value of speed and gray degree for the functions(the value between 1 to 9).
Function and parameter sheet:
1-9 class gray degree1-9 class speed1-9 class speed1-9 class speed1-9 class speed1-9 times circle
B-multicolor flashingC-autorun
A-multicolor fading9-single fading8-multicolor changing7-static white
X value Y value1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree1-9 class gray degree6-static cyan
5-static purple4-static blue3-static yellow2-static green1-static red
Y valueX value
X référence à des fonctions (la valeur entre 1 et C), Y se référer à la valeur de la vitesse et le degré de gris pour les fonctions (valeur entre 1 et 9).
Choisissez une quelconque lumière en tant que maître pour atteindre la fonction automatique de ligne,les opérations sont les suivantes:premièrement, définir la adresse du maître comme 001,d'autres sont définies comme esclave (adresse peut être l'un quelconque sauf 001); la fonction de changement de la maître (001) de lumière, puis toutes les lumières ne fonctionnent de manière synchrone;
Lorsque appuyant sur le bouton, s'il vous plaît patienter pendant environ 10 secondes, puis vous pouvezquitter le mode de la fonction de réglage, le numérique LED cesse de clignoter et les données enregistrées.
LED WALL WASHER C-2.Independent ModeAfter pressing A four times(the first three times is the setup on DMX address)or B directly,light enter into independent mode;the digital LEDs shows PXY,press A once,active digital LEDs moves backward,you can choose function via X and parameter via Y;Press B, the corresponding flash digital LED increase one bit(range: 1~9)Après avoir appuyé sur A quatre reprises (les trois premières fois est la configuration de l'adresse DMX) ou B directement,lumière entrer dans le mode indépendant;les voyants numériques montrent PXY,appuyez une fois,les LED numériques actifs se déplacent vers l'arrière,vous pouvez choisir la fonction via le X et le paramètre parY;augmentations Appuyez sur B,le numérique de flash LED correspondante un peu (de 1 à 9).
0
30
60
90-90
-60
-30
Unit :cdV 0.0 Deg plan ,21.3H 0.0 Deg plan ,22.4
Average beam angle
0
1200
2400
3600
4800
6000
RGB
0
30
60
90-90
-60
-30
Unit :cdV 0.0 Deg plan,18.7H 0.0 Deg plan,20.2
Average beam angle
0
400
800
1200
1600
2000
Red
(50%):21.8deg (50%):19.4deg
G2GLWW-5 SeriesITEM NO.:
1m3.281ft
15.97cm0.5239ft
1512,2142lx140.5,199.0fc
2m6.562ft
31.94cm1.048ft
378.0,535.6lx35.11,49.76fc
3m9.843ft
47.91cm1.572ft
168.0,238.0lx15.61,22.11fc
4m13.12ft
63.88cm2.096ft
94.49,133.9lx8.779,12.44fc
5m16.4ft
79.85cm2.62ft
60.48,85.69lx5.618,7.961fc
Height Eavg,Emax DiameterAngle:9.13deg
Flux out:36.36 lm
.
Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.
Blue
E.Dimension Drawing
1m3.281ft
18.52cm0.6076ft
18006,24824lx1673,2306fc
2m6.562ft
37.04cm1.215ft
4501,6206lx418.2,576.6fc
3m9.843ft
55.56cm1.823ft
2001,2758lx185.9,256.2fc
4m13.12ft
74.08cm2.43ft
1125,1552lx104.5,144.1fc
5m16.4ft
92.60cm3.038ft
720.2,993.0lx66.91,92.25fc
Angle:10.58deg
Flux out:524.5 lm
Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.
D-2.Illuminance At A Distance
1m3.281ft
11.18cm0.3668ft
6799,9476lx631.6,880.4fc
2m6.562ft
22.36cm0.7337ft
1700,2369lx157.9,220.1fc
3m9.843ft
33.54cm1.101ft
755.4,1053lx70.18,97.82fc
4m13.12ft
44.73cm1.467ft
424.9,592.3lx39.48,55.02fc
5m16.4ft
55.91cm1.834ft
271.9,379.0lx25.26,35.21fc
Height Eavg,Emax DiameterAngle:6.40deg
Flux out:79.90 lm:
.
1m3.281ft
13.69cm0.4491ft
15775,21425lx
1466,1990fc
2m6.562ft
27.37cm0.8981ft
3944,5356lx366.4,497.6fc
3m9.843ft
41.06cm1.347ft
1753,2381lx162.8,221.2fc
4m13.12ft
54.75cm1.796ft
985.9,1339lx
91.59,124.4fc
5m16.4ft
68.44cm2.245ft
631.0,857.0lx58.62,79.62fc
Height Eavg,Emax DiameterAngle:7.83deg
Flux out:242.3 lm
.Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.
Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.
1m3.281ft
15.72cm0.5159ft
7743,10366lx719.4,963.0fc
2m6.562ft
31.45cm1.032ft
1936,2592lx179.8,240.8fc
3m9.843ft
47.17cm1.548ft
860.3,1152lx79.93,107.0fc
4m13.12ft
62.89cm2.063ft
483.9,647.9lx44.96,60.19fc
5m16.4ft
78.62cm2.579ft
309.7,414.6lx28.77,38.52fc
Height Eavg,Emax DiameterAngle:8.99deg
Flux out:150.7 lm
Note:The curve is illuminance area under different projection distance and the average illuminance inthe area.
RGB Red Green
LED WALL WASHER
LWW-5-36P
White
78
140
142
70Side Mounting
Bottom Mounting
305/575/610/1115/1220
305/575/610/1115/1220
0
30
60
90-90
-60
-30
Unit :cdV 0.0 Deg plan ,22.9H 0.0 Deg plan ,23.6
Average beam angle(50%):23.2deg
0
700
1400
2100
2800
3500
Green
0
30
60
90-90
-60
-30
Unit :cdV 0.0 Deg plan ,22.0H 0.0 Deg plan ,22.9
Average beam angle(50%):22.5deg
0
110
220
330
440
550
Blue
G2GLWW-5 SeriesITEM NO.:
Note: The above instruction are subject to update or improved without notice.Pls turn to our staff for further details ! Thanks for your long term support !
1.Do not plug them into power when the product is still in package;2.Don't use anything to cover the fixture during application;3.Don't use this product in close environment;4.If this product appears to be damaged, do not attempt
any repair, please contact your dealer.
* Neglect on action of the above treatment will lead to failure of waterproof and properworking of the lights!!!
* Make sure the ground connection well avoid electric shock, due to metal housing.
1. Ne pas les brancher au pouvoir lorsque le produit est toujours en emballage;
2. Ne pas utiliser quoi que ce soit pour couvrir l'appareil lors de l'application;
3. Ne pas utiliser ce produit en étroite environnement;4. Si ce produit semble endommagé,n'essayez pas
toute réparation,s'il vous plaît contactez votre revendeur.
* Négligence sur l'action du traitement ci-dessus conduira à l'échec de imperméable et bon travail des lumières!
* Assurez-vous que la connexion à la terre et éviter choc électrique,grâce à un boîtier métallique.
Caution:
Caution:
F. Installation Drawing: Fix the brackets via M4 tapping screw,mounting size as below:Fixer les supports via M4 Vis Parker, la taille de montage ci-dessous:
LED WALL WASHER
Bottom&Side Mounting
R3.25
35 41
50
20
68 46
8.2
Bottom Mounting