led t8 tube - cps led lighting · 2018-05-02 · drawing: a b 28mm note: size tolerance is ±1mm...
TRANSCRIPT
Drawing:
A
B
28mm
Note: size tolerance is ±1mm
1199 1213
A (mm) B (mm)
25.4mm
Model No.
140lm/W 1200mm/ 4ft 15UL Type A & B cUL, DLC
100-277V ac (cover 100-120V ac)
15W,T8 tube,1200mm/4ft, non-dim, ballast compatible, instant fit, no re-wiring
Description Direct WireLumen efficacy
Length Input Voltage Watts Lumens Certificates
WW:2,100lmCPS-T8-4-15W-UL-F-40 CPS-T8-4-15W-UL-F-50
LED T8 tube-Ballast Fully CompatibleDual Mode (double ended)
Model Number:CPS-T8-4-15W-UL-F-40CPS-T8-4-15W-UL-F-50
Performance SummaryDirectly replace fluorescent 4ft T8-plug and play, no rewiring Fully compatible with most of electronics ballastBallast Factor- Low Ballast Factor lumens per watt 130Ballast Factor- High Ballast Factor lumens per watt 180
Fully functional by-passing existing ballast in the circuit 4ft, 15W, direct wire lumen efficacy of 140 lm/WCCT: 3000K, 4000K, 5000KCRI:Ra>80, THD<20UL/cUL, DLC Certified
7 year Warranty
Ordering Information:
Scenario 2: By pass existing ballast in the circuit*Works with shunted or unshunted lampholders.
Installation Diagrams
Scenario 1: Electronics Ballast Circuit
100~277Vac
L
N
Electronics ballast
100~277VacBallast Fully Compatible LED T8 tube
L
N
Electronics ballast
100~277VacBallast Fully Compatible LED T8 tube
L
N
Without Ballast
Fluorescent lamp
Installation:Turn power off.When installing any CPS led tube light, please do not install from the center of the tube.For proper seating and lamp safety, the LED lamp is required to be installed by holding eachend of the tube caps and rotating the lamp into the lamp holder on each end.Please make sure the lamp is seated correctly in the lamp holder for proper contact betweenthe lamp pins and the lamp holder.Not installing the lamp as directed could lead to improper seating, lamp failure and possible fire.Once installed properly turn power back on and make sure there is good contact on all lamps.Please remove the lamp if there is any buzzing, blinking, or the lamp will not turn on and replace with a new lamp.This luminaire has been modified to operate LED lamps. Do not attempt to install or operate fluorescent lamps in this luminaire. This label must be applied to any fixture retrofitted without a ballast.LED Tube Model: CPS-T8-4-15W-UL-F-40, CPS-T8-4-15W-UL-F-50UL Listed: E474306
Lux Chart
Features
Model#
1M
2M
3M
4M
Photometrics
3m
4m
1m
0m
2m
Light range (dia.)Average Lux (lx)Height
450
112
50
28
273cm
546cm
819cm
1092cm
Packaging
1245x260x225mm
G.W/Carton Quantity
19.0KG 35pcs
Carton sizeDimension
4ft
260
1245
225
LED type: SMD2835Direct Wire Luminous Efficacy : 140lm/WPower: 15W(rated), 15W +/- 1.5W (actual)Power Factor: >0.95THD: <20Lens Option: Frosted, ClearColor Temperature: 3000K 4000K 5000K CRI:Ra>80Connectors: G13
30
60
90
120
150-/+180
-150
-120
-90
-60
-30C0/180C30/210C60/240
UNIT:cd
C90/270
0
09
180
270
360
450
Notice: This product is compatible with over 90% ballast on the market, CPS LED Lighting highly recommends buyers to test the compatibility on sitebefore ordering by large volume.
CPS-T8-4-15W
CPS-T8-4-15W
CPS-T8-4-15W
CPS-T8-4-15W
0
CPS-T8-4-15W
AVERAGE BEAM ANGLE(50%):121.1 DEG
Beam Angle: 150 degreeNet Weight: 0.7kg/ pcInstant on, no flicker or buzzDirectly replace fluorescent 4ft T8-plug and play, no rewiring Fully compatible with most of electronics ballastFully functional by-passing existing ballast in the circuit Warranty: 7 yearsCertificate: UL Type A (1993) & B (1598c) /cUL, DLCL70 life: >50,000 hrs