8.55 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

1

84.00 g

d

MK3/S

Summary

Light bar for the Prusa i3 MK2/MK3 in single light, dual light, and MMU2compatible variants. Mounts attach to the hexagonal holes in the z-axistops. Mounts are designed to fit 9x17mm aluminum u-channel and have ahollow interior that is used to route the wires down the back of the printerframe for a clean look. Mount also includes an opening to insert a powerswitch. LED strip can be powered by the printer power supply. Use a 12V(MK2) or 24V (MK3) LED strip depending on which printer you have.

Purchase hardware kit here. If the kit is out of stock, check back in a fewdays.

Assembly instructions are on Thingiverse.

3D Printers > Other Accessories

mk3s mk3 mk2 lightbar light led

Required hardware: Aluminum u-channel 24V LED strip (MK3) 12V LEDstrip (MK2) Wire

SethBon

LED Light BarPrusa i3 MK2/MK3

VIEW IN BROWSER

updated 24. 11. 2019 | published 24. 11. 2019

Print Files (.gcode) DOWNLOAD ALL FILES

9.3 MB

8.55 hrs f 0.20 mm k 0.40 mm h PLA 83.60 g d MK3/S

updated 24. 11. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

30.0 KBupdated 24. 11. 2019

131.1 KBupdated 24. 11. 2019

37.7 KBupdated 24. 11. 2019

157.3 KBupdated 24. 11. 2019

22.9 KBupdated 24. 11. 2019

Optional hardware: Power switch Heat shrink tubing Brass inserts M3x5mm countersunk screws

Require Tools: Wire stripper Soldering tools Hacksaw Metal file (optional)

dual_mount_02mm_pla_mk3s_8h33m.gcode

single_mount.3mf

single_mount.stl

dual_mount.3mf

dual_mount.stl

left_mmu2_mount.3mf

82.8 KBupdated 24. 11. 2019

20.0 KBupdated 24. 11. 2019

72.5 KBupdated 24. 11. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

left_mmu2_mount.stl

right_mmu2_mount.3mf

right_mmu2_mount.stl