led illumination units - · pdf fileled illumination units ip54 lf1e ip67 ef1a ... ·...
TRANSCRIPT
LED Illumination Units
IP54LF1ELF1E
IP67EF1AEF1A
IP65LF2B
TM
IP67F IP67 IP69KLF1D/LF2DLF1D/LF2D
LF1D-EH/FHLF2D-EH/FH
LF1D-H/LF1D-J (long)
LF1D-C (mini)
LF1B-NLF1B-NIP65
LF1ALF1AIP40
(13/02/15)
2
LED Illumination Unit
LED Illumination Unit SelectionTM
Lineup Shape Application ExamplesIllumination Color
K: Color Temperature (typ.)mm: Dominant Wavelength (typ.)
Reference Illumination (typ.) Size L × W × H mm Illumination Surface Rated Voltage Power Consumption Page
Robust and resistant housing. Can be used in environments subject to water, dust, and oil.
LF1D (Box)
LF2D (Flange)
Degree of Protection:
IP67f/IP67/IP69K*
* LF1D only
Slim
The optimal light distribution can be achieved by combining the lenses of different distribution angle.
· Machine tools· Food processing machines· Test equipment
White (5,700K)
Clear Surface:1,100 lx (directly below at 1.0m)(4,400 lx directly below at 50cm, calculation value)
Diffused surface:1,000 lx (directly below at 1.0m)(4,000 lx directly below at 50cm, calculation value)
· LF1D-E 350 × 49.8 × 29.8
· LF2D-E 389 × 80 × 33.7 Reinforced glass
(Note 1)(clear/diffused)
Polycarbonate(Note 2)(clear/diffused)
24V DC
Slim: 9W
6
Wide
· LF1D-F 270 × 74.7 × 25.9
· LF2D-F 308 × 105 × 29.8
Wide: 12.5W
Wide-angle and high-illuminance model.
LF1D-*H (Box)
LF2D-*H (Flange)
Degree of Protection:
IP67f/IP67/IP69K*
* LF1D only
Slim
· Machine tools· Food processing machines· Automatic manufacturing machines· Printing machines· Production system· Test equipment
White (5,700K)
Slim: 1,450 lx(directly below at 1.0m)
Wide: 1,200 lx(directly below at 1.0m)
· LF1D-EH 350 × 49.8 × 29.8
· LF2D-EH 389 × 80 × 33.7
· LF1D-FH 270 × 74.7 × 25.9
· LF2D-FH 308 × 105 × 29.7
Reinforced glass(Note 1)
Polycarbonate(Note 2)
24V DC
Slim: 11W
10
Wide Wide: 12.5W
LF1D-C (Mini)
Degree of Protection:
IP67f/IP67/IP69K
· Machine tools· Food processing machines· Automatic manufacturing machines· Printing machines· Production system· Test equipment
White (5,700K)180 lx(directly below at 1.0m)
100 × 50 × 25 Reinforced glass 24V DC 4.6W 10
LF1D-H (long)
Degree of Protection:
IP67f/IP67/IP69K
Neutral White (4,700K)560 lx(directly below at 1.0m)
365 × 84 × 24.8 Reinforced glass 24V DC 18.4W 10
LF1D-J (long)
Degree of Protection:
IP67f/IP67/IP69K
Neutral White (4,700K)840 lx(directly below at 1.0m)
510 × 84 × 24.8 Reinforced glass 24V DC 27.6W 10
(13/02/15)
3
Lineup Shape Application ExamplesIllumination Color
K: Color Temperature (typ.)mm: Dominant Wavelength (typ.)
Reference Illumination (typ.) Size L × W × H mm Illumination Surface Rated Voltage Power Consumption Page
Robust and resistant housing. Can be used in environments subject to water, dust, and oil.
LF1D (Box)
LF2D (Flange)
Degree of Protection:
IP67f/IP67/IP69K*
* LF1D only
Slim
The optimal light distribution can be achieved by combining the lenses of different distribution angle.
· Machine tools· Food processing machines· Test equipment
White (5,700K)
Clear Surface:1,100 lx (directly below at 1.0m)(4,400 lx directly below at 50cm, calculation value)
Diffused surface:1,000 lx (directly below at 1.0m)(4,000 lx directly below at 50cm, calculation value)
· LF1D-E 350 × 49.8 × 29.8
· LF2D-E 389 × 80 × 33.7 Reinforced glass
(Note 1)(clear/diffused)
Polycarbonate(Note 2)(clear/diffused)
24V DC
Slim: 9W
6
Wide
· LF1D-F 270 × 74.7 × 25.9
· LF2D-F 308 × 105 × 29.8
Wide: 12.5W
Wide-angle and high-illuminance model.
LF1D-*H (Box)
LF2D-*H (Flange)
Degree of Protection:
IP67f/IP67/IP69K*
* LF1D only
Slim
· Machine tools· Food processing machines· Automatic manufacturing machines· Printing machines· Production system· Test equipment
White (5,700K)
Slim: 1,450 lx(directly below at 1.0m)
Wide: 1,200 lx(directly below at 1.0m)
· LF1D-EH 350 × 49.8 × 29.8
· LF2D-EH 389 × 80 × 33.7
· LF1D-FH 270 × 74.7 × 25.9
· LF2D-FH 308 × 105 × 29.7
Reinforced glass(Note 1)
Polycarbonate(Note 2)
24V DC
Slim: 11W
10
Wide Wide: 12.5W
LF1D-C (Mini)
Degree of Protection:
IP67f/IP67/IP69K
· Machine tools· Food processing machines· Automatic manufacturing machines· Printing machines· Production system· Test equipment
White (5,700K)180 lx(directly below at 1.0m)
100 × 50 × 25 Reinforced glass 24V DC 4.6W 10
LF1D-H (long)
Degree of Protection:
IP67f/IP67/IP69K
Neutral White (4,700K)560 lx(directly below at 1.0m)
365 × 84 × 24.8 Reinforced glass 24V DC 18.4W 10
LF1D-J (long)
Degree of Protection:
IP67f/IP67/IP69K
Neutral White (4,700K)840 lx(directly below at 1.0m)
510 × 84 × 24.8 Reinforced glass 24V DC 27.6W 10
Note 1: Reinforced glass is resistant against oil.Note 2: Polycarbonate is suitable for food processing machine.
(13/02/15)
4
LED Illumination Unit
LED Illumination Unit SelectionTM
Lineup Shape Application ExamplesIllumination Color
K: Color Temperature (typ.)mm: Dominant Wavelength (typ.)
Reference Illumination (typ.) Size L × W × H mm Illumination Surface Rated Voltage Power Consumption Page
Universal input (100 to 240VAC) and 12/24V DC. Compact and slim design.
LF2BDegree of Protection: IP65
· Various machines and systems· Control panel· Plant· Solar power equipment
White (5,500K)
Clear Cover
· LF2B-B: 230 lx· LF2B-C: 425 lx· LF2B-D: 710 lx· LF2B-E: 930 lx· LF2B-F: 1,160 lx
· LF2B-B 210 × 40 × 29· LF2B-C 330 × 40 × 29· LF2B-D 580 × 40 × 29· LF2B-E 830 × 40 × 29· LF2B-F 1,080 × 40 × 29
Polycarbonate
12/24V DC
12/24V DCLF2B-B: 2.6WLF2B-C: 4.9WLF2B-D: 10.6W100 to 240V ACLF2B-B: 3.8WLF2B-C: 7.5WLF2B-D: 9.2WLF2B-E: 14.3WLF2B-F: 21.8W
16
White Cover
· LF2B-B: 215 lx· LF2B-C: 390 lx· LF2B-D: 645 lx· LF2B-E: 835 lx· LF2B-F: 1,040 lx
100 to 240V AC
Thin and slim styles fit into compact spaces. IP65 (waterproof, dustproof). 6 different lengths and 6 distinct colors.
LF1B-N
Degree of Protection: IP65
· Machine tool · Plant equipment· Test equipment · Control panel White (5,500K)
Clear cover
LF1B-NA: 90 lxLF1B-NF: 935 lx(directly below at 50cm)
· LF1B-NA 134 × 27.5 × 16
· LF1B-NB 210 × 27.5 × 16
· LF1B-NC 330 × 27.5 × 16
· LF1B-ND 580 × 27.5 × 16
· LF1B-NE 830 × 27.5 × 16
· LF1B-NF 1,080 × 27.5 × 16
Clear cover (polycarbonate)
White cover (polycarbonate)
24V DC
White·Warm white ·Blue LF1B-NA: 1.5W LF1B-NB: 2.9W LF1B-NC: 4.4W LF1B-ND: 8.7W LF1B-NE: 13.0W LF1B-NF: 17.3W
Yellow·Red·Green LF1B-NA: 1.0W LF1B-NB: 2.0W LF1B-NC: 2.9W LF1B-ND: 5.8W LF1B-NE: 8.7W LF1B-NF: 11.6W
18
· Food processing machines · Cosmetic plant · Chemical plant · Show cases
Warm white (2,900K)LF1B-NA: 60 lxLF1B-NF: 620 lx(directly below at 50cm)
· Semiconductor manufacturing equipment· IC foundry Yellow (590nm)
LF1B-NA: 20 lxLF1B-NF: 180 lx(directly below at 50cm)· Photosensitive material
· Semiconductor manufacturing equipment· Darkroom experiment
Red (620nm)
· Advertising Display· Light ornaments
Blue (455nm)LF1B-NA: 10 lxLF1B-NF: 80 lx(directly below at 50cm)
Green (525nm)LF1B-NA: 30 lxLF1B-NF: 300 lx(directly below at 50cm)
LED module and highly efficient heat dissipation technology achieved slim design.
LF1A
Degree of Protection: IP40
· Control panel · Plant equipment· Machine tool · Test equipment White (5,500K)
Clear cover
LF1A-A1: 190 lxLF1A-B1: 380 lxLF1A-D1: 760 lx(directly below at 50cm)
· LF1A-A1 120 × 55 × 22· LF1A-B1 180 × 55 × 22· LF1A-D1 300 × 55 × 22
Clear PMMA 24V DC
White·Warm White LF1A-A1: 1.8W LF1A-B1: 3.6W LF1A-D1: 7.2W
20
· Food processing machine· Cosmetic plant · Chemical plant Warm white (2,800K)
LF1A-A1: 130 lxLF1A-B1: 260 lxLF1A-D1: 520 lx(directly below at 50cm)
· Semiconductor manufacturing equipment· IC foundry Yellow (590nm)
Yellow·Red LF1A-A1: 2.2W LF1A-B1: 4.4W LF1A-D1: 8.7W· Semiconductor manufacturing equipment
· Photographic laboratory· Darkroom experiment
Red (625nm)LF1A-A1: 85 lxLF1A-B1: 170 lxLF1A-D1: 340 lx
Resistant against dust and water. No-lens, condensing lens, and dual lens available.
LF1EDegree of Protection: IP54
Freezer and refrigerated display case
White (5,000K)
Con
dens
ing
Lens White
LF1E-A: 1,800 lxLF1E-B: 1,950 lxLF1E-C: 2,000 lxLF1E-D: 2,000 lxLF1E-E: 2,000 lx(directly below at 30cm)
LF1E-A: 292 × 36 × 18.8LF1E-B: 550 × 36 × 18.8LF1E-C: 808 × 36 × 18.8LF1E-D: 1,066 × 36 × 18.8LF1E-E: 1,450 × 36 × 18.8
Clear cover(polycarbonate) 24V DC
LF1E-A: 4.2WLF1E-B: 8.4WLF1E-C: 12.6WLF1E-D: 16.8WLF1E-E: 22.8W
22
Warm white (3,000K)
Can be used in hazardous area of Zone 1 and 2.
EF1ADegree of Protection: IP67
· Product Inspection
· Printing factory · Gas station
· Chemical complex control panel
White (5,700K)
Clear glass surface:1,100 lx (condensing light)205 lx (diffused light)
Translucent glass: 450 lx (condensing light)175 lx (diffused light)
· Direct mounting 277 × 104 × 82
· With angle adjustable mounting bracket 310.2 × 117.4 × 126.7
· With mounting bracket 310.2 × 104.0 × 99.4
Reinforced glass
100 to 240V AC 19W
25
24V DC 16W
(13/02/15)
5
Note 1: Reinforced glass is resistant against oil.Note 2: Polycarbonate is suitable for food processing machine.
Lineup Shape Application ExamplesIllumination Color
K: Color Temperature (typ.)mm: Dominant Wavelength (typ.)
Reference Illumination (typ.) Size L × W × H mm Illumination Surface Rated Voltage Power Consumption Page
Universal input (100 to 240VAC) and 12/24V DC. Compact and slim design.
LF2BDegree of Protection: IP65
· Various machines and systems· Control panel· Plant· Solar power equipment
White (5,500K)
Clear Cover
· LF2B-B: 230 lx· LF2B-C: 425 lx· LF2B-D: 710 lx· LF2B-E: 930 lx· LF2B-F: 1,160 lx
· LF2B-B 210 × 40 × 29· LF2B-C 330 × 40 × 29· LF2B-D 580 × 40 × 29· LF2B-E 830 × 40 × 29· LF2B-F 1,080 × 40 × 29
Polycarbonate
12/24V DC
12/24V DCLF2B-B: 2.6WLF2B-C: 4.9WLF2B-D: 10.6W100 to 240V ACLF2B-B: 3.8WLF2B-C: 7.5WLF2B-D: 9.2WLF2B-E: 14.3WLF2B-F: 21.8W
16
White Cover
· LF2B-B: 215 lx· LF2B-C: 390 lx· LF2B-D: 645 lx· LF2B-E: 835 lx· LF2B-F: 1,040 lx
100 to 240V AC
Thin and slim styles fit into compact spaces. IP65 (waterproof, dustproof). 6 different lengths and 6 distinct colors.
LF1B-N
Degree of Protection: IP65
· Machine tool · Plant equipment· Test equipment · Control panel White (5,500K)
Clear cover
LF1B-NA: 90 lxLF1B-NF: 935 lx(directly below at 50cm)
· LF1B-NA 134 × 27.5 × 16
· LF1B-NB 210 × 27.5 × 16
· LF1B-NC 330 × 27.5 × 16
· LF1B-ND 580 × 27.5 × 16
· LF1B-NE 830 × 27.5 × 16
· LF1B-NF 1,080 × 27.5 × 16
Clear cover (polycarbonate)
White cover (polycarbonate)
24V DC
White·Warm white ·Blue LF1B-NA: 1.5W LF1B-NB: 2.9W LF1B-NC: 4.4W LF1B-ND: 8.7W LF1B-NE: 13.0W LF1B-NF: 17.3W
Yellow·Red·Green LF1B-NA: 1.0W LF1B-NB: 2.0W LF1B-NC: 2.9W LF1B-ND: 5.8W LF1B-NE: 8.7W LF1B-NF: 11.6W
18
· Food processing machines · Cosmetic plant · Chemical plant · Show cases
Warm white (2,900K)LF1B-NA: 60 lxLF1B-NF: 620 lx(directly below at 50cm)
· Semiconductor manufacturing equipment· IC foundry Yellow (590nm)
LF1B-NA: 20 lxLF1B-NF: 180 lx(directly below at 50cm)· Photosensitive material
· Semiconductor manufacturing equipment· Darkroom experiment
Red (620nm)
· Advertising Display· Light ornaments
Blue (455nm)LF1B-NA: 10 lxLF1B-NF: 80 lx(directly below at 50cm)
Green (525nm)LF1B-NA: 30 lxLF1B-NF: 300 lx(directly below at 50cm)
LED module and highly efficient heat dissipation technology achieved slim design.
LF1A
Degree of Protection: IP40
· Control panel · Plant equipment· Machine tool · Test equipment White (5,500K)
Clear cover
LF1A-A1: 190 lxLF1A-B1: 380 lxLF1A-D1: 760 lx(directly below at 50cm)
· LF1A-A1 120 × 55 × 22· LF1A-B1 180 × 55 × 22· LF1A-D1 300 × 55 × 22
Clear PMMA 24V DC
White·Warm White LF1A-A1: 1.8W LF1A-B1: 3.6W LF1A-D1: 7.2W
20
· Food processing machine· Cosmetic plant · Chemical plant Warm white (2,800K)
LF1A-A1: 130 lxLF1A-B1: 260 lxLF1A-D1: 520 lx(directly below at 50cm)
· Semiconductor manufacturing equipment· IC foundry Yellow (590nm)
Yellow·Red LF1A-A1: 2.2W LF1A-B1: 4.4W LF1A-D1: 8.7W· Semiconductor manufacturing equipment
· Photographic laboratory· Darkroom experiment
Red (625nm)LF1A-A1: 85 lxLF1A-B1: 170 lxLF1A-D1: 340 lx
Resistant against dust and water. No-lens, condensing lens, and dual lens available.
LF1EDegree of Protection: IP54
Freezer and refrigerated display case
White (5,000K)
Con
dens
ing
Lens White
LF1E-A: 1,800 lxLF1E-B: 1,950 lxLF1E-C: 2,000 lxLF1E-D: 2,000 lxLF1E-E: 2,000 lx(directly below at 30cm)
LF1E-A: 292 × 36 × 18.8LF1E-B: 550 × 36 × 18.8LF1E-C: 808 × 36 × 18.8LF1E-D: 1,066 × 36 × 18.8LF1E-E: 1,450 × 36 × 18.8
Clear cover(polycarbonate) 24V DC
LF1E-A: 4.2WLF1E-B: 8.4WLF1E-C: 12.6WLF1E-D: 16.8WLF1E-E: 22.8W
22
Warm white (3,000K)
Can be used in hazardous area of Zone 1 and 2.
EF1ADegree of Protection: IP67
· Product Inspection
· Printing factory · Gas station
· Chemical complex control panel
White (5,700K)
Clear glass surface:1,100 lx (condensing light)205 lx (diffused light)
Translucent glass: 450 lx (condensing light)175 lx (diffused light)
· Direct mounting 277 × 104 × 82
· With angle adjustable mounting bracket 310.2 × 117.4 × 126.7
· With mounting bracket 310.2 × 104.0 × 99.4
Reinforced glass
100 to 240V AC 19W
25
24V DC 16W
(13/02/15)
6
LF1D/LF2D LED Illumination Units
•LEDprovidesenergy-savings,long-life,space-savingandno-maintenanceadvantages.
•Illuminationsurfacevariety—reinforcedglassorpolycar-bonate,bothinclearordiffusedtype.
•IP67Fdegreeofprotection(polycarbonate:IP67)• IP69Kdegreeofprotection(LF1D)• Robusthousingofaluminumdiecastandstainlesssteel.•Thinandslimprofilesallowinstallationinspace-limitedareas.
•EvenlowprofileisavailablewiththesleekdesignofLF2D.Resistanttodustbuilduponthesurface.
Application examplesMachinetools,foodprocessingequipment,automaticmanufacturingmachines,printingmachines,productionsystem,testequipment,re-frigerationandfreezers.
Brightest in its class, excellent power savings. Optimal optical design achieves high brightness at both the center and periphery. IP67F degree of protection.
LF1D (Illumination color: white)Style Slim(LF1D-E) Wide(LF1D-F)
Shape
LEDArrangement 10LEDs×1row 7LEDs×2rows
OptionalAccessories IlluminationSurface IlluminationSurface
CableGlandLF9Z-A11
CableLF9Z-C05
MountingBracket
LF9Z-B11,-B12ClearReinforcedGlass ClearPolycarbonate ClearReinforcedGlass ClearPolycarbonate
Without(CableglandholeonthesideofLF1D)
—— LF1D-E2F-2W LF1D-E3G-2W LF1D-F2F-2W LF1D-F3G-2WWith LF1D-E2F-2W-101 LF1D-E3G-2W-101 LF1D-F2F-2W-101 LF1D-F3G-2W-101
Without(CableglandholeonthebackofLF1D)
—— LF1D-E2F-2W-200 LF1D-E3G-2W-200 LF1D-F2F-2W-200 LF1D-F3G-2W-200With LF1D-E2F-2W-201 LF1D-E3G-2W-201 LF1D-F2F-2W-201 LF1D-F3G-2W-201
With(Side)
—— LF1D-E2F-2W-300 LF1D-E3G-2W-300 LF1D-F2F-2W-300 LF1D-F3G-2W-300With LF1D-E2F-2W-301 LF1D-E3G-2W-301 LF1D-F2F-2W-301 LF1D-F3G-2W-301
With— LF1D-E2F-2W-350 LF1D-E3G-2W-350 LF1D-F2F-2W-350 LF1D-F3G-2W-350With LF1D-E2F-2W-A LF1D-E3G-2W-A LF1D-F2F-2W-A LF1D-F3G-2W-A
With(Back)
—— LF1D-E2F-2W-400 LF1D-E3G-2W-400 LF1D-F2F-2W-400 LF1D-F3G-2W-400With LF1D-E2F-2W-401 LF1D-E3G-2W-401 LF1D-F2F-2W-401 LF1D-F3G-2W-401
With— LF1D-E2F-2W-450 LF1D-E3G-2W-450 LF1D-F2F-2W-450 LF1D-F3G-2W-450With LF1D-E2F-2W-451 LF1D-E3G-2W-451 LF1D-F2F-2W-451 LF1D-F3G-2W-451
•ContactIDECforcableglandholeotherthanthestandardM8size.•UseClass2powersupplywhenusingtheLF1DasUL/c-ULlistedLEDilluminationunit.
LF2D (Illumination color: white)Style Slim(LF2D-E) Wide(LF2D-F)
Shape
LEDArrangement 10LEDs×1row 7LEDs×2rowsOptionalAccessories IlluminationSurface IlluminationSurface
CableGlandLF9Z-A11 CableLF9Z-C05 ClearReinforcedGlass ClearPolycarbonate ClearReinforcedGlass ClearPolycarbonateWithout(cableglandhole
onthesideofLF2D) — LF2D-E2F-2W LF2D-E3G-2W LF2D-F2F-2W LF2D-F3G-2WWithout(cableglandholeonthebackofLF2D) — LF2D-E2F-2W-200 LF2D-E3G-2W-200 LF2D-F2F-2W-200 LF2D-F3G-2W-200
With(Side)— LF2D-E2F-2W-300 LF2D-E3G-2W-300 LF2D-F2F-2W-300 LF2D-F3G-2W-300With LF2D-E2F-2W-A LF2D-E3G-2W-A LF2D-F2F-2W-A LF2D-F3G-2W-A
With(Back)— LF2D-E2F-2W-400 LF2D-E3G-2W-400 LF2D-F2F-2W-400 LF2D-F3G-2W-400With LF2D-E2F-2W-450 LF2D-E3G-2W-450 LF2D-F2F-2W-450 LF2D-F3G-2W-450
•ContactIDECforcableglandholeotherthanthestandardM8size.•UseClass2powersupplywhenusingtheLF2DasUL/c-ULlistedLEDilluminationunit.
Accessories Accessory Material PartNo. Remarks PackageQuantity
CableGland Brass LF9Z-A11 M8,applicablewiresize:ø3.5to5.5mm 1MountingBracket
ForLF1D-E(slim)StainlessSteel
LF9Z-B11 Withmountingscrews 2(forrightandleft)ForLF1D-F(wide) LF9Z-B12 Withmountingscrews 2(oneeachforrightandleft)
Cable PVC LF9Z-C05 5m 1•Seepage24forangleadjustablemountingbracket(LF1D).•UseClass2powersupplywhenusingtheLF2DasUL/c-ULlistedLEDilluminationunit.
TM
(13/02/15)
7
LF1D/LF2D LED Illumination Units
SpecificationsModel LF1D LF2D
Style Slim Wide Slim Wide
RatedVoltage 24VDC
VoltageRange 21.6to26.4VDCRatedPower(typ.)(atratedvoltage) 9W 12.5W 9W 12.5W
InsulationResistance 1MΩminimum(500VDCmegger)
DielectricStrength 1000VAC50/60Hz,1minuteVibrationResistance(damagelimits) Frequency5to55Hz,amplitude0.5mm
ShockResistance(damagelimits) 1000m/s2
OperatingTemperature –30to+55°C(nofreezing)
OperatingHumidity 45to85%RH(nocondensation)
StorageTemperature –35to+70°C(nofreezing)
OperatingAtmosphere Nocorrosivegas
Life(Note1) 50,000hours(Theilluminationdurationinwhichthebrightnessmaintainsaminimumof70%oftheinitialvalueat25°C.)
DegreeofProtection(Note2) IP67F(reinforcedglass),IP67(polycarbonate)
Material(Note3)
Housing:DiecastaluminumFrontcover:StainlesssteelIlluminationsurface:Reinforcedglassorpolycarbonate
Housingandflange:DiecastaluminumIlluminationsurface:Reinforcedglassorpolycarbonate
Weight(approx.) LF1D-E∗∗-2W∗:750gLF1D-E∗∗-2W-A∗:950g
LF1D-F∗∗-2W∗:800gLF1D-F∗∗-2W-∗:1000g
LF2D-E∗∗-2W∗:850gLF2D-E∗∗-2W-A∗:1000g
LF2D-F∗∗-2W∗:900gLF2D-F∗∗-2W-A∗: 1050g
Note1: LEDlifedependsontheoperatingenvironment.Note2: Waterprooforoil-proofcharacteristicsspecifiedbyIEC60529andJEM1030.
Forilluminationunitswithoutaccessories,useacableglandandcablethatsatisfyIP67ForIP67degreeofprotection.Note3: Thereinforcedglassandpolycarbonateilluminationsurfaceshavethesameappearance,buthavedifferentdegreesofprotection(IP67ForIP67).
LED Optical SpecificationsModel LF1D LF2D
Style Slim Wide Slim Wide
IlluminationSurface Clear Diffused Clear Diffused Clear Diffused Clear Diffused
IlluminationColor White
ColorTemperature(typ.) 5700K
TotalLuminousFlux(typ.) 600lm 840lm 600lm 840lmReferenceIlluminance(typ.)at1.0mdirectlybelow 1100lx 1000lx 1100lx 1000lx 1100lx 1000lx 1100lx 1000lx
•LEDmodulesandilluminationunitsmayvaryinilluminationcolorandilluminance.
-400
-200
0
200
400
-400 -200 0 200 400X (mm)
Y (m
m)
1000800
600
400
200
1000
800
600
400
200
-400
-200
0
200
400
-400 -200 0 200 400X (mm)
Y (m
m)
-400
-200
0
200
400
-400 -200 0 200 400X (mm)
Y (m
m)
800
600
400
200
-400
-200
0
200
400
-400 -200 0 200 400X (mm)
Y (m
m) 800
600
400
200
Applicableferrules:0.25to0.75mm2
Recommendedsource:PhoenixContact:AI0,25-12BU,AI0,34-12TQ,AI0,5-12WH,AI0,75-12GY
Terminal Block WiringSlim
(+)
(–)
(+)
(–)
Wide
Internal Circuit
(–)
(+) Constant-currentpower supply
+ LED
Housing
Illuminance Distribution (LF1D/LF2D) at 1.0mSlim Wide
Reinforcedglass:FPolycarbonate:G
4
X:longsideY:shortside
Clearsurface ClearsurfaceDiffusedsurface Diffusedsurface
1 Series(Legend)
LF Seriesname
2 Shape(Legend)
1 Box2 Flange
3 Style(LEDarrangement)(Legend)
E Slim(10LEDs×1row)F Wide(7LEDs×2rows)
5 DegreeofProtection(Legend)
F IP67fG IP67
6 Voltage(Legend)
2 24VDC
7 IlluminationColor(Legend)
W White
Part No. Development
1 2 3 4 5 6 7 8
LF 2 D – E 2 F – 2 W – A
4 IlluminationSurface(Legend)
2Clear
Reinforcedglass3 Polycarbonate5
DiffusedPolycarbonate
9 Reinforcedglass
8 CableGland(Legend) (LF9Z-A11)
8 Cable(Legend) (LF9Z-C05)
8 MountingBracket(Legend)(LF9Z-B11,LF9Z-B12)
Blank Withoutaccessories.Cableglandholeontheside.A Withcablegland(standard).Withcable.Withmountingbracket(LF1Donly)1 Withoutcablegland.Cableglandholeontheside.
0 Without01
WithoutYes
2 Withoutcablegland.Cableglandholeintheback.3 Withcablegland(standard)ontheside. 0
5WithoutYes4 Withcablegland(standard)intheback.
• LF1D/LF2D: "100"and"351"arenotavailable.• LF2D: "350"and"∗∗1"(withmountingbracket)arenotavailable.
(13/02/15)
8
LF1D/LF2D LED Illumination Units
DimensionsLF1D-E (Slim, 10 LEDs × 1 row)
LF1D-F (Wide, 7 LEDs × 2 rows)
Alldimensionsinmm.
25.0
±0.2
374.0 ±2.0
(146)(159)
2.0374
305
29.8
2.0
R2.6
ø5.0
Cable length: 5m
257350
3249.8
30
25
390
1.5
15
40
Brown: (+)Blue: (–)
Mounting Hole Layout
4-M4 P0.7
Effective thread: 10mm
Pink:
Axis Center IlluminationSurface
Front Cover
Side Cover
Mounting Bracket
Housing
4-M5 Screws
8
40
15
M8 P1.0
Effectivethread:5 mm
4-M4 P0.7
Effective thread: 10 mm
Without cable gland, mounting bracket, and cable2-ø4.24-ø4.2
40±0
.2
305±0.2
40±0
.2
40
8
27
(107)(120)227
R2.6
40±0
.2
292 ±2.0
2.0
ø5.0
58.6
183.612.0
2.0
1.5
25.9
40
310292270
74.7
60
2-ø5.24-ø5.2 8
12
6060
8
60±0
.2
60±0
.2
227 ±0.2
Cable length: 5m
4-M5P0.8
Effective thread: 10mm
Axis Center IlluminationSurface Front Cover
Side Cover
Mounting Bracket
Housing
Mounting Hole Layout4-M5 Screws
M8 P1.0
Effectivethread:5 mm
4-M5 P0.8
Effective thread: 10 mm
Without cable gland, mounting bracket, and cable
Brown: (+)Blue: (–)Pink:
(13/02/15)
9
LF1D/LF2D LED Illumination Units
DimensionsLF2D-E (Slim, 10 LEDs × 1 row)
LF2D-F (Wide, 7 LEDs × 2 rows)
Alldimensionsinmm.
6-M5×10 Hexagon SocketFlat Head Screw+ Gasket (supplied with LF2D)
6-M5 Screws
Waterproof Gasket(supplied with LF2D)
Cable Gland
∗ External diameter ofcable gland is ø20mm
Cable length: 5mø5.0
15.75
max
.28
.755
+0.2
0
366+0.20
65±.
2
374±0.2
37.530
.6
310374
65
389
80Pa
nel t
hick
ness
: 5 m
ax.
Axis Center
Mounting Hole Layout
Brown: (+)Blue: (–)Pink:
14.835
55
217
90
308293
105
6-M5×10 Hexagon SocketFlat Head Screw+ Gasket (supplied with LF2D)
Axis Center
286 +0.2 0
80+0
.2 0
90±0
.2
293±0.2
6-M5 Screws
Mounting Hole Layout
ø5.024
.8
Waterproof Gasket(supplied with LF2D)
Cable Gland
∗ External diameter ofcable gland is ø20mm
Cable length: 5m
5 m
ax.
Pane
l thi
ckne
ss: 5
max
. Brown: (+)Blue: (–)Pink:
(13/02/15)
1010
Water, dust, oil-proof LED illumination units in slim and compact housings.A variety of sizes and light distribution angles for various sizes and types of machine.• Water,dust,oil-proofIP67,IP67F(reinforcedglassilluminationsurface),IP69K(LF1D)degreeofprotection.• Robusthousingofaluminumdiecast,stainlesssteel,andrein-forcedglass.
LF1D-C (mini)• Compactprofileof100×50×25mm.• No-multishadowlightilluminatethesmallsurfacescratchesandirregularityoftargetobjects,improvingtheprocessingaccuracy.Wide120odistributionangle.
LF1D-EH / LF2D-EH / LF1D-FH / LF2D-FH (slim/wide)• Lightsthetargetobjectandtheperipheryinwideangle.Suitableformiddle-sizedmachines.• Theterminalblockandspringclampconnectionsensureeasywiringandinstallation.Combinationwithangleadjustablemount-ingbracketenablesinstallationinvariousapplications.
LF1D-H / LF1D-J (long)•Twolengthavailable(365mmand510mm).•Flat,no-multishadowlightwithlessglareilluminatesthesmallsurfacescratchesandirregularityoftargetobjectsfromadis-tance,improvingtheprocessingaccuracy.• Wide120odistributionangle.High-power2000/3000lmluminousfluxissuitableforreplacingfluorescentlight.
LF1D-C (mini, illumination color: white)Cable Length PartNo.
With(side)3m LF1D-C2F-2W-3305m LF1D-C2F-2W-350
With(back)3m LF1D-C2F-2W-4305m LF1D-C2F-2W-450
LF1D-EH/FH (slim/wide, wide angle & high illuminance, shape: box, illumination color: white)Style Slim(LF1D-EH) Wide(LF1D-FH)
OptionalAccessories IlluminationSurface
CableGlandLF9Z-A11
Cable(5m)
LF9Z-C05
MountingBracket
LF9Z-B11,-B12ReinforcedGlass Polycarbonate ReinforcedGlass Polycarbonate
Without(cableglandholeontheside) —
— LF1D-EH2F-2W LF1D-EH3G-2W LF1D-FH2F-2W LF1D-FH3G-2WWith LF1D-EH2F-2W-101 LF1D-EH3G-2W-101 LF1D-FH2F-2W-101 LF1D-FH3G-2W-101
Without(cableglandholeontheback) —
— LF1D-EH2F-2W-200 LF1D-EH3G-2W-200 LF1D-FH2F-2W-200 LF1D-FH3G-2W-200With LF1D-EH2F-2W-201 LF1D-EH3G-2W-201 LF1D-FH2F-2W-201 LF1D-FH3G-2W-201
With(side)
—— LF1D-EH2F-2W-300 LF1D-EH3G-2W-300 LF1D-FH2F-2W-300 LF1D-FH3G-2W-300With LF1D-EH2F-2W-301 LF1D-EH3G-2W-301 LF1D-FH2F-2W-301 LF1D-FH3G-2W-301
With— LF1D-EH2F-2W-350 LF1D-EH3G-2W-350 LF1D-FH2F-2W-350 LF1D-FH3G-2W-350With LF1D-EH2F-2W-A LF1D-EH3G-2W-A LF1D-FH2F-2W-A LF1D-FH3G-2W-A
With(back)
—— LF1D-EH2F-2W-400 LF1D-EH3G-2W-400 LF1D-FH2F-2W-400 LF1D-FH3G-2W-400With LF1D-EH2F-2W-401 LF1D-EH3G-2W-401 LF1D-FH2F-2W-401 LF1D-FH3G-2W-401
With— LF1D-EH2F-2W-450 LF1D-EH3G-2W-450 LF1D-FH2F-2W-450 LF1D-FH3G-2W-450With LF1D-EH2F-2W-451 LF1D-EH3G-2W-451 LF1D-FH2F-2W-451 LF1D-FH3G-2W-451
PackageQuantity:1
LF2D-EH/FH (slim/wide, wide angle & high illuminance, shape: flange, illumination color: white)Style Slim(LF2D-EH) Wide(LF2D-FH)
OptionalAccessories IlluminationSurface
CableGlandLF9Z-A11
Cable(5m)LF9Z-C05 ReinforcedGlass Polycarbonate ReinforcedGlass Polycarbonate
Without(cableglandholeontheside) — LF2D-EH2F-2W LF2D-EH3G-2W LF2D-FH2F-2W LF2D-FH3G-2W
Without(cableglandholeontheback) — LF2D-EH2F-2W-200 LF2D-EH3G-2W-200 LF2D-FH2F-2W-200 LF2D-FH3G-2W-200
With(side)— LF2D-EH2F-2W-300 LF2D-EH3G-2W-300 LF2D-FH2F-2W-300 LF2D-FH3G-2W-300With LF2D-EH2F-2W-A LF2D-EH3G-2W-A LF2D-FH2F-2W-A LF2D-FH3G-2W-A
With(back)— LF2D-EH2F-2W-400 LF2D-EH3G-2W-400 LF2D-FH2F-2W-400 LF2D-FH3G-2W-400With LF2D-EH2F-2W-450 LF2D-EH3G-2W-450 LF2D-FH2F-2W-450 LF2D-FH3G-2W-450
PackageQuantity:1
LF1D-EH/FHLF2D-EH/FH
LF1D-H/LF1D-J (long)
LF1D-C (mini)
Application Examples
Machinetools,foodprocessingequipment,automaticmanufactur-ingmachines,printingmachines,productionsystem,andtestequipment.
LF1D/LF2DLEDIlluminationUnits
TM
(13/02/15)
11
LF1D-H (long model 365 mm, illumination color: neutral white)
Cable Length PartNo.
Side5m LF1D-H2F-2N-350
1.5m+M12connector LF1D-H2F-2N-3B0
Back5m LF1D-H2F-2N-450
1.5m+M12connector LF1D-H2F-2N-4B0
LF1D-J (long model 510 mm, illumination color: neutral white)
Cable Length PartNo.
Side5m LF1D-J2F-2N-350
1.5m+M12connector LF1D-J2F-2N-3B0
Back5m LF1D-J2F-2N-450
1.5m+M12connector LF1D-J2F-2N-4B0
SpecificationsModel LF1D-C LF1D-E/LF2D-E LF1D-EH/LF2D-EH LF1D-F/LF2D-F LF1D-FH/LF2D-FH LF1D-H LF1D-J
Style Mini Slim Slim(wideangle&highilluminance) Wide Wide(wideangle&
highilluminance) Long(365mm) Long(510mm)
RatedVoltage 24VDC
VoltageRange 21.6to26.4VDC
RatedPower(typ.)(atratedvoltage) 4.6W 9W 11W 12.5W 12.5W 18.4W 27.6W
InsulationResistance 100MΩminimum(500VDCmegger)
DielectricStrength 1,000VAC,50/60Hz,1minuteVibrationResistance(damagelimits)
Frequency5to55Hz,amplitude0.5mm
ShockResistance(damagelimits) 1,000m/s2
OperatingTemperature –30to+55°C(nofreezing)
OperatingHumidity 45to85%RH(nocondensation)StorageTemperature –35to+70°C(nofreezing)
OperatingAtmosphere Nocorrosivegas
Life(Note1) 50,000hours(Theilluminationdurationinwhichthebrightnessmaintainsaminimumof70%oftheinitialvalueat25°C.)DegreeofProtection(Note2) IP67(allmodels),IP67F(reinforcedglassilluminationsurface),IP69K(LF1D)
Material(Note3)
Housing:aluminumFrontcover:stainlesssteelIlluminationsurface:reinforcedglass
Housing:diecastaluminumFrontcover(LF1D):stainlesssteelFlange(LF2D):diecastaluminumIlluminationsurface:reinforcedglassorpolycarbonate
Housing:aluminumFrontcover:stainlesssteelIlluminationsurface:reinforcedglass
Weight(approx.) LF1D-C2F-2W-350:420g
LF1D-E(H)∗∗-2W-W:950gLF2D-E(H)∗∗-2W-A:1,000g
LF1D-F(H)∗∗-2W-A:1,000gLF2D-F(H)∗∗-2W-A:1,050g
LF1D-H2F-2N-350:1,200g
LF1D-J2F-2N-350:1,600g
Note1:LEDlifedependsontheoperatingenvironment.Note2:Waterprooforoil-proofcharacteristicsspecifiedbyIEC60529(IP67)andDIN40050-9(IP69K).Forilluminationunitswithoutaccessories,useacableglandand
cablethatsatisfytherequireddegreeofprotection.Note3:Thereinforcedglassandpolycarbonateilluminationsurfaceshavethesameappearance,buthavedifferentdegreesofprotection.
LF1D-EH/FH, LF2D-EH/FH Accessories (slim/wide)Accessory Material PartNo. Remarks PackageQuantity
CableGland Brass LF9Z-A11 M8,applicablewiresize:3.5to5.5 1
MountingBracketLF1D-E/LF1D-EH(slim)
StainlessSteelLF9Z-B11
Withmountingscrews 2(forrightandleft)LF1D-F/LF1D-FH(wide) LF9Z-B12
AngleAdjustableMountingBracket
LF1D-E/LF1D-EH(slim)StainlessSteel
LF9Z-1MDE1LF1D-F/LF1D-FH(wide) LF9Z-1MDF1
Cable PVC LF9Z-C05 5m 1
TM
LF1D/LF2DLEDIlluminationUnits
Part No. Development
4 LightDistribution
(Legend)
Blank Standard
HWideangle&HighIlluminance
9 CableGland(LF9Z-A11) 9Cable(LF9Z-C05) 9MountingBracketLF9Z-B11,LF9Z-B12
(Legend) (Legend) (Legend)Blank Withoutaccessories.Cableglandholeontheside.1 Withoutcablegland.Cableglandholeontheside.
0 Without
0 Without2 Withoutcablegland.Cableglandholeontheback.
3 Withcablegland(standard)ontheside.0 Without3 3mcable 1 With
4 Withcablegland(standard)ontheback.5 5mcable
B 1.5mcable+M12connector
A Slim/Wide:withcablegland,With5mcable.Withmountingbracket.
1 Series
(Legend)
LF SeriesName
2 Shape
(Legend)
1 Box2 Flange
3 Style(LEDarrangement)
(Legend)
C MiniE SlimF WideH Long(365mm)J Long(510mm)
6 DegreeofProtection(Legend)
F IP67FG IP67
7 Voltage
(Legend)
2 24VDC
8 IlluminationColor
(Legend)
W White(5,700K)
N NeutralWhite(4,700K)
5IlluminationSurface(Legend)
2Clear
Reinforcedglass3 Polycarbonate5
DiffusedPolycarbonate
9 Reinforcedglass
1 2 3 4 5 6 7 8 9
LF 2 D E H 2 F 2 W A— — —
Notallcombinationsofpartno.codesarepossible.Foravailablepartnos.,contactIDEC.
(13/02/15)
12
Housing
(–)
(+) Constant CurrentCircuit+ LED
Housing
Constant CurrentCircuit+ LED(–)
(+)
(–)
(+)
Housing
Constant CurrentCircuit+ LED
LED Optical SpecificationsModel LF1D-C LF1D-E/LF2D-E LF1D-EH/LF2D-EH LF1D-F/LF2D-F LF1D-FH/LF2D-FH LF1D-H LF1D-J
Style Mini Slim Slim(wideangle&highilluminance) Wide Wide(wideangle&
highilluminance) Long(365mm) Long(510mm)
IlluminationColor White NeutralWhite
ColorTemp.(typ.) 5,700K 4,700K
LuminusFlux(typ.) 560lm 600lm 1,000lm 840lm 1,260lm 2,000lm 3,000lm
ReferenceIlluminance(typ.)at1.0mdirectlybelow
180lx 1,100lx 1,450lx 1,100lx 1,200lx 560lx 840lx
•LED modules and illumination units may vary in illumination color and illuminance.
Internal CircuitLF1D-C LF1D-E(H)/LF1D-F(H)
LF2D-E(H)/LF2D-F(H)LF1D-H/LF1D-J
Light Distribution Characteristics at 1.0 mLF1D-C LF1D/2D-EH LF1D/2D-FH
−400 400−800 800 (mm)0 0
(lx)
1,200
800
400
–400 400–800 8000 (mm)
450
300
150
0
(lx)
–400 400–800 8000 (mm)
1,200
800
400
0
(lx)
LF1D-H LF1D-J
–400 400–800 8000 (mm)
900
600
300
0
(lx)
–400 400–800 8000 (mm)
900
600
300
(lx)
90o90o
60o
0o
30o
60o100
30o
200
90º90º
60º
0º
30º
60º100
30º
200
Light Distribution CurveLF1D-H LF1D-JLF1D-C LF1D/2D-EH LF1D/2D-FH
90º90º
60º
0
30º
60º100º
30º
200
90 °90 °
60 °
0º
30 °
60 °100
30 °
200º200º
90º90º
60º
0º
30º
60º
400
30º
800
1,200
90º90º
60º
0°
30º
60º
600
30º
1,200
1,800
C
BB
C A
A
A-A
B-B
C-C
Dimensions
LF1D-C (Mini Model)
Mounting Hole Layout
Alldimensionsinmm.
TM
LF1D/LF2DLEDIlluminationUnits
10084
50
Illumination Surface Front Cover
25
2
Cable Length
4.6Housing
Partially-stripped (×2)24AWG
11
9
Cable
840.2
ø8 (Note)
11
18.1
2-M5 tapped hole or ø5.2 hole
11
(23.9)
Brown: + 24V DCBlue: –0V DC
22
12
Note: When leading the cable from the cable glandon the back, provide a hole in the mounting plate.Also, provide a proper sealing.Recommended M5 screw: Screw head height: 9.5mm max. Screw head diameter: 10mm max. Screw length: 20mm min.Recommended washer diameter: 10mm max.
2-ø11.2
(13/02/15)
13
LF1D-E/EH (Slim Model/Box) (10 LEDs × 1 row)
Mounting Hole Layout
Alldimensionsinmm.
TM
LF1D/LF2DLEDIlluminationUnits
LF2D-E/EH (Slim Model/Flange) (10 LEDs × 1 row)
Mounting Hole Layout
8
40
15
M8 P1.0
Effective thread:5mm
4-M4P0.7
Effective thread:10mm
(When using no accessories)2-ø4.2
4-4.2
40±
0.2
305±0.2
40±
0.2
40
8
Cable Length: 5m
ø15 +0.20164.8±1
164.8
374±225±
0.2
401.
529
.8
374
2R2.6
390
2530
49.8
32350
257
(159) (146)3054-M4P0.7
Effective thread:10mm
Axis Center
4-M5 Screws
Side Cover
15
Brown: L(+)Blue: N (–)Pink: ( )
Front Cover
Housing
Illumination SurfaceMounting Bracket
2
5
28
(73)
90°
53
5013
3666
R45
LF9Z-1MDE1(Angle AdjustableMounting Bracket)
Parially-stripped(×2) 24AWG
(Note 2) (Note 1)
Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate.
Note 2: When using the angle adjustable mounting bracket, the tolerance is 374 when the gasket diameter is larger than ø10 and ø12 or smaller.
–0.5+2.0
Angle: 0°
Angle: 90°
80
389
65
374310
30.6
37.5
28.7
5 m
ax.
15.7
Axis Center
Pan
el th
ickn
ess:
5 m
ax
+ Gasket (supplied with LF2D)6-M5×10 Hexagon Socket
Cable Length: 5m
ø5
Cable Gland (Note)
Waterproof Gasket(suplied with LF2D)
Note: External diameter of cable gland is ø20mm
(+)
(–)
Applicable ferrules: 0.25 to 0.75mm2
Recommended source:AI 0.25-12BU, AI 0.34-12TQ,AI 0.5-12 WH, AI 0.75-12GY
Terminal Block Wiring
6-M5Screws
374+0.2 0
366±0.2
55+
0.2
065
±0.
2
Brown: L(+)Blue: N (–)Pink: ( )
(13/02/15)
14
Note 2: When using the angle adjustable mounting bracket, the tolerance is 374 when the gasket diameter is larger than ø10 and ø12 or smaller.
4-M5 P0.8
Effective thread:10mm
Cable Length: 5m
Axis Center
Side Cover
Brown: L(+)Blue: N (–)Pink: ( )
Housing
Front CoverIllumination SurfaceMounting Bracket
LF9Z-1MDE1(Angle AdjustableMounting Bracket)
(When using no accessories) 2-ø5.24-ø5.2 8
12
6060
8
60±
0.2
60±
0.2
227±0.24-M5 P0.8
Effective thread:10mm
M8 P1.0
Effective thread:5mm
12R2.6
ø5
58.6
183.627
2
1.5
25.9
40
310292270
74.7
227(107)(120)
60
Parially-stripped (×2)24AWG
2
124.8 90°
6236
(87.5)
975
27.577
R60
ø15
(Note 1)
124.8 ±1
40±
0.2
292 ±2
4-M5 Screws
+0.20
(Note 2) –0.5+2.0
Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate.
Angle: 0°
Angle: 90°
TM
LF1D/LF2DLEDIlluminationUnits
Alldimensionsinmm.
LF1D-F/FH (Wide Model/Box) (7 LEDs × 2 rows)
Mounting Hole Layout
LF2D-F/FH (Wide Model/Flange) (7 LEDs × 2 rows)
Mounting Hole Layout
Axis Center
Pan
el th
ickn
ess:
5 m
ax
+ Gasket (supplied with LF2D)6-M5×10 Hexagon Socket
Cable Length: 5mCable Gland (Note)
Note: External diameter of cable gland is ø20mm
(+)
(–)
Applicable ferrules: 0.25 to 0.75mm2
Recommended source:AI 0.25-12BU, AI 0.34-12TQ,AI 0.5-12 WH, AI 0.75-12GY
Terminal Block Wiring
ø5
35 14.8
55
217
90
308293
105
5 m
ax.
24.8
Brown: L(+)Blue: N (–)Pink: ( )
Waterproof Gasket(suplied with LF2D)
286+0.2 0
80+
0.2
0
90±
0.2
293±0.2
6-M5Screws
(13/02/15)
15
Side CoverPartially-stripped (×2) 24AWG
A-A sec. (enlarged view)(When M5 screw is installed)
9 to
11
Scr
ew L
engt
h(N
ote
2)Mounting Panel
Plain WasherSpring Washer
M5 Screw
Housing
(25)
510
55
432
84
12.7
ø4.
6
12.5 (35)
24.8
72
360120
72±
0.2
360 ±0.2
120 ±0.2
230 ±0.2
Front CoverIllumination Surface
Housing
A
A
M5
Cable
P0.8
8-ø5.5
ø8 (Note 2)
LF1D-J2F-2∗-∗B∗ (M12 connector)
Cable Length
Brown: +24V DCBlue: –0V DC
Pin Assignment
+24V DC
–0V DC NC
NC
Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. A ø16 hole is necessary when using the LF1D-∗2F-2N-∗B∗ (M12 connector type).
Note 2: Choose mounting screws in consideration of mounting plate thickness.
1470 46.8 ø14
.8
M12 connector: SAC-4P-MS SCO/150/1.5
Use a connector that satisfies the required degree of protection.Recommended connector: SAC-4P-1.5-PUR/FS SCO
TM
LF1D/LF2DLEDIlluminationUnits
LF1D-H (Long Model, 365 mm)
Mounting Hole Layout
Alldimensionsinmm.
LF1D-J (long model, 510 mm)
Mounting Hole Layout
365
55
288
8424
.872
215
ø4.
6
(25)
12.5 (35)
72±
0.2
215±0.2
157.5 ±0.2
12.7
Side CoverPartially-stripped (×2) 24AWG
Brown: +24V DCBlue: –0V DC
A
A
M5 P0.8
ø8 (Note 1)
6-ø5.5
1470
LF1D-H2F-2∗-∗B∗ (M12 connector)
46.8 ø14
.8
A-A sec. (enlarged view)(When M5 screw is installed)
9 to
11
Scr
ew L
engt
h(N
ote
2)Mounting Panel
Plain WasherSpring Washer
M5 Screw
Housing
+24V DC
–0V DC NC
NC
Pin Assignment
Front CoverIllumination Surface
Housing
Cable
Cable Length
Note 1: When leading the cable from the cable gland on the back, provide a hole in the mounting plate. A ø16 hole is necessary when using the LF1D-∗2F-2N-∗B∗ (M12 connector type).
Note 2: Choose mounting screws in consideration of mounting plate thickness.
M12 connector: SAC-4P-MS SCO/150/1.5
Use a connector that satisfies the required degree of protection.Recommended connector: SAC-4P-1.5-PUR/FS SCO
(13/02/15)
16
Universal input (100 to 240V AC) and 12/24V DC input models are available.Compact and slim design suitable for installing in various applications and also in narrow spaces. IP65 (waterproof, dustproof). • Slimdesign(40mmwide,29mmhigh).Canbeinstalledinnarrowspaceseasilyusingmountingbrackets.
• Fivedifferentlengths(210,330,580,830,and1,080mm)available.
• BrightandclearwhiteLEDilluminatesthetargetobjectclearlyandbrightly.
• Choiceoftwocovercolors:clearandwhite.
LF2B LED Illumination Units
C US
LISTED
(12/24VDCmodelonly)
Internal Circuit
Fuse
Constant-currentpower supply
+LEDBlue (N)
Brown (L)
Fuse
Constant-currentpower supply
+LED
Blue (–)
Brown (+)
100 to 240V AC
12/24V DC
DimensionsWithout mounting bracket
PartNo. L
LF2B-B∗P-∗THWW2-1M 210
LF2B-C∗P-∗THWW2-1M 330
LF2B-D∗P-∗THWW2-1M 580
LF2B-E∗P-∗THWW2-1M 830
LF2B-F∗P-∗THWW2-1M 1,080
(22.5) Recommended mounting centers: BA
LCable: 1000
ø5.
5
Mounting Bracket (supplied)
45
31FlatScrewM4(supplied)
6
R2.1Mounting Bracket (optional)
31
40
CD
(7)(7)
Cable
AWG 18
Cover End Cover
Blue: N
Brown: L(DC: +)
(DC: –)
29
40
CableGland
M4×P0.7Screw Hole
Anti-projectionHole
(Either oneof the two) Or ø4.2
Hole
8.5
ø2.1
BA
20
28
39
ø4.21.7
20
D
M4 Screw Hole or ø4.2 Hole
Alldimensionsinmm.
AccessoriesModel PartNo.
PackageQuantity
Remarks
U-shapedMountingBracket
LF9Z-1SB21PN10 10
SuppliedwiththeLF2B.LF2B-B,-C,andD:Twobracketsaresupplied.LF2B-E: Threebracketsaresupplied.LF2B-F: Fourbracketsaresupplied.
L-shapedMountingBracket
LF9Z-1SB22PN10 10Twobrackets(forrightandleft)arerequiredforalternatemountingofanLF2B.
Part No. Development
LF2B-C3P-ATHWW2-1MLengthB: 210mmC: 330mmD:580mmE:830mmF:1,080mm
Rated VoltageA:100to240VACB:12/24VDC(210,330,and580mmlengthsonly)
Cover3:Clear4:White
•UseClass2powersupplywhenusingtheLF2BasUL/c-ULlistedLEDilluminationunit(12/24VDConly).
IlluminationColor White
Shape
ClearCover WhiteCover
RatedVoltage 100to240VAC 12/24VDC 100to240VAC 12/24VDC
LF2B-B(210mm) LF2B-B3P-ATHWW2-1M LF2B-B3P-BTHWW2-1M LF2B-B4P-ATHWW2-1M LF2B-B4P-BTHWW2-1M
LF2B-C(330mm) LF2B-C3P-ATHWW2-1M LF2B-C3P-BTHWW2-1M LF2B-C4P-ATHWW2-1M LF2B-C4P-BTHWW2-1M
LF2B-D(580mm) LF2B-D3P-ATHWW2-1M LF2B-D3P-BTHWW2-1M LF2B-D4P-ATHWW2-1M LF2B-D4P-BTHWW2-1M
LF2B-E(830mm) LF2B-E3P-ATHWW2-1M LF2B-E4P-ATHWW2-1M
LF2B-F(1,080mm) LF2B-F3P-ATHWW2-1M LF2B-F4P-ATHWW2-1M
Packagequantity:1
TM
(13/02/15)
17
SpecificationsModel LF2B-B(210mm) LF2B-C(330mm) LF2B-D(580mm) LF2B-E(830mm) LF2B-F(1,080mm)
RatedVoltage100to240VAC,50/60Hz(voltagerange:90to264VAC)
12/24VDC(voltagerange:10.8to30VDC)
InputCurrent(typ.)(attheratedcurrent)(Note1)
100to240VAC 33mA 67mA 96mA 149mA 226mA
12/24VDC 215mA 409mA 880mA
PowerConsumption(typ.)(attheratedvoltage)
100to240VAC 3.8W 7.5W 9.2W 14.3W 21.8W
12/24VDC 2.6W 4.9W 10.6W
InsulationResistance 100MΩmin.(500VDCmeggar)
DielectricStrength100to240VAC 2,000VAC,1minute(betweenliveanddeadparts)
12/24VDC 1,000VAC,1minute(betweenliveanddeadparts)
VibrationResistance(damagelimits) Frequency:5to55Hz,Amplitude0.17mm Acceleration20m/s2,2hourseachin3axes
ShockResistance(damagelimits) 300m/s2,5shockseachin6axes
OperatingTemperature –30to+55°C(nocondensation)
OperatingHumidity 45to85%(nofreezing)
StorageTemperature –35°Cto+70°C(nocondensation)
OperatingAtmosphere Nocorrosivegas
Life(Note2)40,000hours(Ta=25°C)(Thetotal illumination life inwhichthe illuminancemaintainsaminimumof
70%oftheinitialvalue.)
DegreeofProtection IP65(IEC60529)
Material Cover:polycarbonate,Endcover/cablegland:polyamide.Wire:PVC(AWG24×2C)
Weight(approx.)100to240VAC 200g 255g 400g 520g 645g
12/24VDC 175g 235g 370g
Note1:100to240VAC:at100VAC,12/24VDC:12VDC Note2:LEDlifedependsontheoperatingenvironment.
LED Optical SpecificationsIlluminationColor White
ColorTemperature 5,500K
Model LF2B-B(210mm) LF2B-C(330mm) LF2B-D(580mm) LF2B-E(830mm) LF2B-F (1,080mm)
LuminousFlux(typ.) 180lm 360lm 720lm 1,080lm 1,440lm
Cover Clear White Clear White Clear White Clear White Clear White
ReferenceIlluminance(typ.)at0.5mdirectlybelow
230lx 215lx 425lx 390lx 710lx 645lx 930lx 835lx 1,160lx 1,040lx
•LEDmodulesandilluminationunitsmayvaryinilluminationcolorsandilluminance.
Illuminance Distribution at 0.5m (clear cover)
Dimensions
LF2B-D3P-2THWW2-1MLF2B-C3P-2THWW2-1MLF2B-B3P-2THWW2-1M
LF2B-F3P-2THWW2-1MLF2B-E3P-2THWW2-1M
1m
1m
0
1m 1m0
150 lx200 lx
100 lx50 lx
30 lx
10 lx
1m
1m1m 1m0
0300 lx
400 lx
200 lx100 lx
50 lx
20 lx50 lx
100 lx
30 lx
1m
1m1m 1m0
0 700 lx400 lx
200 lx
100 lx
700 lx
1m
1m1m
1m0
50 lx
900 lx0
400 lx200 lx
50 lx
1m
1m
1m 1m
0
0
100 lx
1100 lx800 lx
400 lx
200 lx
102030501001502003004007008009001100
LF2B-B (210mm) LF2B-D3P-2THWW2-1MLF2B-C3P-2THWW2-1MLF2B-B3P-2THWW2-1M
LF2B-F3P-2THWW2-1MLF2B-E3P-2THWW2-1M
1m
1m
0
1m 1m0
150 lx200 lx
100 lx50 lx
30 lx
10 lx
1m
1m1m 1m0
0300 lx
400 lx
200 lx100 lx
50 lx
20 lx50 lx
100 lx
30 lx
1m
1m1m 1m0
0 700 lx400 lx
200 lx
100 lx
700 lx
1m
1m1m
1m0
50 lx
900 lx0
400 lx200 lx
50 lx
1m
1m
1m 1m
0
0
100 lx
1100 lx800 lx
400 lx
200 lx
102030501001502003004007008009001100
LF2B-C (330mm) LF2B-D3P-2THWW2-1MLF2B-C3P-2THWW2-1MLF2B-B3P-2THWW2-1M
LF2B-F3P-2THWW2-1MLF2B-E3P-2THWW2-1M
1m
1m
0
1m 1m0
150 lx200 lx
100 lx50 lx
30 lx
10 lx
1m
1m1m 1m0
0300 lx
400 lx
200 lx100 lx
50 lx
20 lx50 lx
100 lx
30 lx
1m
1m1m 1m0
0 700 lx400 lx
200 lx
100 lx
700 lx
1m
1m1m
1m0
50 lx
900 lx0
400 lx200 lx
50 lx
1m
1m
1m 1m
0
0
100 lx
1100 lx800 lx
400 lx
200 lx
102030501001502003004007008009001100
LF2B-D (580mm)
LF2B-D3P-2THWW2-1MLF2B-C3P-2THWW2-1MLF2B-B3P-2THWW2-1M
LF2B-F3P-2THWW2-1MLF2B-E3P-2THWW2-1M
1m
1m
0
1m 1m0
150 lx200 lx
100 lx50 lx
30 lx
10 lx
1m
1m1m 1m0
0300 lx
400 lx
200 lx100 lx
50 lx
20 lx50 lx
100 lx
30 lx
1m
1m1m 1m0
0 700 lx400 lx
200 lx
100 lx
700 lx
1m
1m1m
1m0
50 lx
900 lx0
400 lx200 lx
50 lx
1m
1m
1m 1m
0
0
100 lx
1100 lx800 lx
400 lx
200 lx
102030501001502003004007008009001100
LF2B-E (830mm)
LF2B-D3P-2THWW2-1MLF2B-C3P-2THWW2-1MLF2B-B3P-2THWW2-1M
LF2B-F3P-2THWW2-1MLF2B-E3P-2THWW2-1M
1m
1m
0
1m 1m0
150 lx200 lx
100 lx50 lx
30 lx
10 lx
1m
1m1m 1m0
0300 lx
400 lx
200 lx100 lx
50 lx
20 lx50 lx
100 lx
30 lx
1m
1m1m 1m0
0 700 lx400 lx
200 lx
100 lx
700 lx
1m
1m1m
1m0
50 lx
900 lx0
400 lx200 lx
50 lx
1m
1m
1m 1m
0
0
100 lx
1100 lx800 lx
400 lx
200 lx
102030501001502003004007008009001100
LF2B-F (1,080mm)
(22.5) Recommended mounting centers: BA
LCable: 1000
ø5.
5
Mounting Bracket (supplied)
45
31FlatScrewM4(supplied)
6
R2.1Mounting Bracket (optional)
31
40
CD
(7)(7)
Cable
AWG 18
Cover End Cover
Blue: N
Brown: L(DC: +)
(DC: –)
29
40
CableGland
M4×P0.7Screw Hole
Anti-projectionHole
(Either oneof the two) Or ø4.2
Hole
8.5
ø2.1
BA
20
28
39
ø4.21.7
20
D
M4 Screw Hole or ø4.2 Hole
(22.5) Recommended mounting centers: BA
LCable: 1000
ø5.
5
Mounting Bracket (supplied)
45
31FlatScrewM4(supplied)
6
R2.1Mounting Bracket (optional)
31
40
CD
(7)(7)
Cable
AWG 18
Cover End Cover
Blue: N
Brown: L(DC: +)
(DC: –)
29
40
CableGland
M4×P0.7Screw Hole
Anti-projectionHole
(Either oneof the two) Or ø4.2
Hole
8.5
ø2.1
BA
20
28
39
ø4.21.7
20
D
M4 Screw Hole or ø4.2 Hole
MountingHoleLayout
RecommendedMountingHoleLayout
With mounting bracket LF9Z-1SB21 (U-shaped brackets supplied with LED)
(22.5) Recommended mounting centers: BA
LCable: 1000
ø5.
5
Mounting Bracket (supplied)
45
31FlatScrewM4(supplied)
6
R2.1Mounting Bracket (optional)
31
40
CD
(7)(7)
Cable
AWG 18
Cover End Cover
Blue: N
Brown: L(DC: +)
(DC: –)
29
40
CableGland
M4×P0.7Screw Hole
Anti-projectionHole
(Either oneof the two) Or ø4.2
Hole
8.5
ø2.1
BA
20
28
39
ø4.21.7
20
D
M4 Screw Hole or ø4.2 Hole
Mounting bracket LF9Z-1SB21
With mounting bracket LF9Z-1SB22 (L-shaped bracket purchased separately from LED)
PartNo. A B C DRequiredNo.of
MountingBracket
LF9Z-1SB21 LF9Z-1SB22
LF2B-B∗P-∗THWW2-1M 165 — 236 224
2
2
LF2B-C∗P-∗THWW2-1M 285 — 356 344
LF2B-D∗P-∗THWW2-1M 535 — 606 594
LF2B-E∗P-∗THWW2-1M 785 393 856 844 3
LF2B-F∗P-∗THWW2-1M 1,035 345 1,106 1,094 4
Mounting bracket LF9Z-1SB22
4.2
17.6
23.6
2-R2.
1
LF2B LED Illumination Units
(13/02/15)
18
LF1B-N LED Illumination UnitsThin and slim styles fit into compact spaces.IP65 (waterproof, dustproof). 6 different lengths and 6 distinct colors.•Compactdesign(27.5mmwide,16mmhigh,and134to1,080mmlong)fitsintonarrowspaces.• Improvedbrightnesswithwhiteilluminationcolor.•White,warmwhite,yellow,red,blue,andgreenillumi-nationcolors.•Twocovercolors:clearandwhite.
C US
LISTED
Part No. Development
IlluminationColor White WarmWhite Yellow Red Blue Green
Shape
Clearcover
Whitecover
LF1B-NA(134mm)
Clearcover LF1B-NA3P-2THWW2-∗ LF1B-NA3P-2TLWW2-∗ LF1B-NA3P-2SHY2-∗ LF1B-NA3P-2SHR2-∗ LF1B-NA3P-2THS2-∗ LF1B-NA3P-2SHG2-∗
Whitecover LF1B-NA4P-2THWW2-∗ LF1B-NA4P-2TLWW2-∗ LF1B-NA4P-2SHY2-∗ LF1B-NA4P-2SHR2-∗ LF1B-NA4P-2THS2-∗ LF1B-NA4P-2SHG2-∗
LF1B-NB(210mm)
Clearcover LF1B-NB3P-2THWW2-∗ LF1B-NB3P-2TLWW2-∗ LF1B-NB3P-2SHY2-∗ LF1B-NB3P-2SHR2-∗ LF1B-NB3P-2THS2-∗ LF1B-NB3P-2SHG2-∗
Whitecover LF1B-NB4P-2THWW2-∗ LF1B-NB4P-2TLWW2-∗ LF1B-NB4P-2SHY2-∗ LF1B-NB4P-2SHR2-∗ LF1B-NB4P-2THS2-∗ LF1B-NB4P-2SHG2-∗
LF1B-NC(330mm)
Clearcover LF1B-NC3P-2THWW2-∗ LF1B-NC3P-2TLWW2-∗ LF1B-NC3P-2SHY2-∗ LF1B-NC3P-2SHR2-∗ LF1B-NC3P-2THS2-∗ LF1B-NC3P-2SHG2-∗
Whitecover LF1B-NC4P-2THWW2-∗ LF1B-NC4P-2TLWW2-∗ LF1B-NC4P-2SHY2-∗ LF1B-NC4P-2SHR2-∗ LF1B-NC4P-2THS2-∗ LF1B-NC4P-2SHG2-∗
LF1B-ND(580mm)
Clearcover LF1B-ND3P-2THWW2-∗ LF1B-ND3P-2TLWW2-∗ LF1B-ND3P-2SHY2-∗ LF1B-ND3P-2SHR2-∗ LF1B-ND3P-2THS2-∗ LF1B-ND3P-2SHG2-∗
Whitecover LF1B-ND4P-2THWW2-∗ LF1B-ND4P-2TLWW2-∗ LF1B-ND4P-2SHY2-∗ LF1B-ND4P-2SHR2-∗ LF1B-ND4P-2THS2-∗ LF1B-ND4P-2SHG2-∗
LF1B-NE(830mm)
Clearcover LF1B-NE3P-2THWW2-∗ LF1B-NE3P-2TLWW2-∗ LF1B-NE3P-2SHY2-∗ LF1B-NE3P-2SHR2-∗ LF1B-NE3P-2THS2-∗ LF1B-NE3P-2SHG2-∗
Whitecover LF1B-NE4P-2THWW2-∗ LF1B-NE4P-2TLWW2-∗ LF1B-NE4P-2SHY2-∗ LF1B-NE4P-2SHR2-∗ LF1B-NE4P-2THS2-∗ LF1B-NE4P-2SHG2-∗
LF1B-NF(1,080mm)
Clearcover LF1B-NF3P-2THWW2-∗ LF1B-NF3P-2TLWW2-∗ LF1B-NF3P-2SHY2-∗ LF1B-NF3P-2SHR2-∗ LF1B-NF3P-2THS2-∗ LF1B-NF3P-2SHG2-∗
Whitecover LF1B-NF4P-2THWW2-∗ LF1B-NF4P-2TLWW2-∗ LF1B-NF4P-2SHY2-∗ LF1B-NF4P-2SHR2-∗ LF1B-NF4P-2THS2-∗ LF1B-NF4P-2SHG2-∗
Application
•Machinetools•Plantequipment•Inspection/testequipment
•Controlpanel
•Foodprocessingmachines
•Cosmeticplants•Chemicalplants•Showcases
•Semiconductormanufacturingequipment
•ICfoundries
•Photosensitivematerials
•Semiconductormanufacturingequipment
•Darkroomexperiment
•AdvertisingDisplay•Lightornaments
• Specifycablelengthinplaceof∗inPartNo.1M:1m,3M:3m• UseClass2powersupplywhenusingtheLF1B-NasUL/c-ULlistedLEDilluminationunit.
LF1B-NC3P-2THWW2-1MLengthA:134mmB:210mmC:330mmD:580mmE:830mmF:1,080mm
Cover3:Clear4:White
Cable length1M:1m3M:3m
Illumination colorTHWW2: WhiteTLWW2: WarmwhiteSHY2: YellowSHR2: RedTHS2: BlueSHG2: Green
Internal Circuit
Fuse
LED
Brown (+)
Blue (–)
TM
(13/02/15)
19
LF1B-N LED Illumination Units
SpecificationsModel LF1B-NA
(134mm)LF1B-NB(210mm)
LF1B-NC(330mm)
LF1B-ND(580mm)
LF1B-NE(830mm)
LF1B-NF(1,080mm)
RatedVoltage 24VDC(operatingvoltagerange:21.6to26.4V)
InputCurrent(typ.)(attheratedcurrent)
white/warmwhite/blue 60mA 120mA 180mA 360mA 540mA 720mA
red/yellow/green 40mA 80mA 120mA 240mA 360mA 480mA
PowerConsumption(typ.)(attheratedvoltage)
white/warmwhite/blue 1.5W 2.9W 4.4W 8.7W 13.0W 17.3W
red/yellow/green 1.0W 2.0W 2.9W 5.8W 8.7W 11.6W
InsulationResistance 100MΩminimum(500VDCmegger)
DielectricStrength 1,000VAC,1minute(betweenliveanddeadparts)
VibrationResistance(damagelimits) Frequency:5to55Hz,Amplitude0.5mmAcceleration60m/s2,2hourseachin3axes
Frequency:5to55Hz,Amplitude0.17mmAcceleration20m/s2,2hourseachin3axes
ShockResistance(damagelimits) 1,000m/s2,5shockseachin6axes 300m/s2,5shockseachin6axes
OperatingTemperature –30to+55°C(nofreezing)
OperatingHumidity 45to85%RH(nocondensation)
StorageTemperature –35to+70°C(nofreezing)
OperatingAtmosphere Nocorrosivegases
Life(Note) 40,000hours(Ta=25°C)(Thetotalilluminationlifeinwhichtheilluminancemaintainsaminimumof70%oftheinitialvalue.)
DegreeofProtection IP65(IEC60529)
Material Cover:polycarbonate,Endcover/cablegland:polyamide,Wire:PVC(24AWG×2C)
Weight(approx.) 95g 125g 165g 255g 430g 740g
Note:LEDlifedependsontheoperatingenvironment.
LED Optical SpecificationsIlluminationColor White WarmWhite Yellow Red Green Blue
ColorTemperature/DominantWavelength(typ.)
5,500K 2,900K 590nm 620nm 525nm 455nm
ReferenceIlluminance(typ.)at0.5mdirectlybelow
LF1B-NA Clear: 90lxWhite:80lx
Clear: 60lxWhite:55lx
Clear: 20lxWhite:18lx
Clear: 20lxWhite:18lx
Clear: 30lxWhite:27lx
Clear: 10lxWhite: 9lx
LF1B-NB Clear: 220lxWhite:200lx
Clear: 145lxWhite:130lx
Clear: 40lxWhite:36lx
Clear: 40lxWhite:36lx
Clear: 60lxWhite:55lx
Clear: 20lxWhite:18lx
LF1B-NC Clear: 400lxWhite:360lx
Clear: 250lxWhite:225lx
Clear: 75lxWhite:65lx
Clear: 75lxWhite:65lx
Clear: 110lxWhite:100lx
Clear: 30lxWhite:27lx
LF1B-ND Clear: 660lxWhite:600lx
Clear: 455lxWhite:410lx
Clear: 125lxWhite:110lx
Clear: 125lxWhite:110lx
Clear: 190lxWhite:170lx
Clear: 50lxWhite:45lx
LF1B-NE Clear: 820lxWhite:740lx
Clear: 560lxWhite:500lx
Clear: 160lxWhite:145lx
Clear: 160lxWhite:145lx
Clear: 260lxWhite:235lx
Clear: 60lxWhite:55lx
LF1B-NF Clear: 935lxWhite:850lx
Clear: 620lxWhite:555lx
Clear: 180lxWhite:160lx
Clear: 180lxWhite:160lx
Clear: 300lxWhite:270lx
Clear: 80lxWhite:70lx
•LEDmodulesandilluminationunitsmayvaryinilluminationcolorsandilluminance.
Illuminance Distribution at 0.5m (reference value)LF1B-NC3P-2THWW2-∗LF1B-NA3P-2THWW2-∗ LF1B-NB3P-2THWW2-∗
60 lx
15 lx30 lx
45 lx
60 lx30 lx
90 lx
150 lx120 lx
150 lx100 lx
200 lx
300 lx250 lx
1m
1m
0
1m 1m0
1m 1m
1m 1m1m 1m 1m 1m0 0
0 0
LF1B-NF3P-2THWW2-∗LF1B-ND3P-2THWW2-∗ LF1B-NE3P-2THWW2-∗
250 lx
100 lx
400 lx
600 lx500 lx
250 lx
100 lx
400 lx
700 lx550 lx
300 lx
100 lx
500 lx
900 lx700 lx
1m
1m
1m
1m1m
1m
1m
0 0 0
1m 1m 1m 1m 1m0 0 0
Dimensions
Model A B CLF1B-NA 134 64 123LF1B-NB 210 140 199LF1B-NC 330 260 319LF1B-ND 580 510 569LF1B-NE 830 760 819LF1B-NF 1,080 1,010 1,069
Model DLF1B-N∗-2∗-1M 1,000LF1B-N∗-2∗-3M 3,000
A
C
D
(B)35.0
6.0R2.
1
4.2
2.5
9.0
14.0
27.5
16.0
35.0
Alldimensionsinmm.
(13/02/15)
20
LF1A LED Illumination UnitsEnergy saving LED illumination units, only 1/3 power consumption compared with fluorescent lamps.•40,000hourservicelife,nomaintenanceneeded.•LEDmodulesandhighlyefficientheatdissipationtechnol-ogyachieveslowheatgeneration.
•Only22mmhigh,makingitpossibletoinstallinginsideasmallspace.
•White,warmwhite,yellow,andred.
LED Illumination UnitsIlluminationColor White WarmWhite Yellow Red
PartNo.
3LEDs×2columns LF1A-A1-2THWW6-∗ LF1A-A1-2TLWW6-∗ LF1A-A1-2SHY8-∗ LF1A-A1-2SHR8-∗6LEDsx2columns LF1A-B1-2THWW6-∗ LF1A-B1-2TLWW6-∗ LF1A-B1-2SHY8-∗ LF1A-B1-2SHR8-∗6LEDs×2columns LF1A-D1-2THWW6-∗ LF1A-D1-2TLWW6-∗ LF1A-D1-2SHY8-∗ LF1A-D1-2SHR8-∗
Shape
Spectrum
400nm 700nm 400nm 700nm 400nm 700nm 400nm 700nm
Features
Suppressingglare,thebright,clearwhiteilluminationcolorlightsupatargetobjectclearly.
Warmcolorsimilartothatofanincandescentlightbulb.Thisilluminationcolorgivesoffacolortemperatureof2800K.
Yellowilluminationcolorgivesoffanemissionspectrumwithadominantwavelengthof590nm.Itdoesnotinclude500nmorshorterwavelengths.
Redilluminationcolorgivesoffanemissionspectrumwithalongwavelength(dominantwavelengthof625nm).
ApplicationExamples
•MachineTools•ControlPanel/PlantEquipment• Inspection/TestEquipment
•FoodProcessingMachines•CosmeticPlants•ChemicalPlants
•SemiconductorManufacturingEquipment
• ICPlants
•ApplicationEquipmentforPhotographicLaboratory
•SemiconductorManufacturingEquipment
•DarkroomExperiments
Note:Insert"U"inplaceof∗forLEDilluminationunitwithUL/c-UL/CEmarking.UseClass2powersupplywhenusingtheLF1AasUL/c-ULlistedLEDilluminationunit.
SpecificationsPartNo. LF1A-∗-2THWW6
LF1A-∗-2TLWW6LF1A-∗-2SHY8LF1A-∗-2SHR8
RatedVoltage 24VDC(non-polarized)
InputCurrent(typ.)(atratedvoltage)
3LEDsx2rows 75mA 90mA6LEDsx2rows 150mA 180mA12LEDsx2rows 300mA 360mA
RatedPower(typ.)(atratedvoltage)
3LEDsx2rows 1.8W 2.2W6LEDsx2rows 3.6W 4.4W12LEDsx2rows 7.2W 8.7W
InsulationResistance Betweenliveanddeadparts:100MΩ(500VDCmegger)DielectricStrength Betweenliveanddeadparts:1000VAC,1minuteVibrationResistance(Damagelimits) 5to55Hz,0.5mm20m/s2
ShockResistance(DamageLimits) 980m/s2
OperatingTemperature –20to50°COperating/StorageHumidity 45to85%RH(nocondensation)StorageTemperature –25to+70˚COperatingAtmosphere Nocorrosivegas
Life 40000hours(Thetotalilluminationdurationinwhichtheluminancemaintainsaminimumof70%oftheinitialvalue.)
Weight(approx.) LF1A-A1:190g,LF1A-B1:270g,LF1A-D:470gDegreeofProtection IP40
Material
WithoutUL/c-UL/CEmarking:Housing:AL,Endplate:SPCC,Lens:PMMA(Polymethylmethacrylate),Cablegland:Brass,Wire:PVC(VCTF0.3sq)
WithUL/c-UL/CEmarking:Housing:AL,Endplate:SPCC,Lens:PC(Polycarbonate)Cablegland:Brass,Wire:PVC(RO-FLEX1000TAWG22)
Note:Insert"U"inplaceof∗forLEDilluminationunitwithUL/c-UL/CEmarking.
TM
(13/02/15)
21
LF1A LED Illumination Units22
R2.25
A
C
10
10
35Wire (non-polarized)VCTF0.3SQ × 2 cores
55
4.5
ø5
4.5
25
B 14 500+20
11
1
Model A B C
LF1A-A1-∗ 120 92 108
LF1A-B1-∗ 180 152 168
LF1A-D1-∗ 300 272 288
Internal Circuit
Dimensions
Alldimensionsinmm.
White
LED
Black
R
R
R24V DC(non-polarized)
LED Optical SpecificationsPartNo. LF1A-∗2THWW6-∗ LF1A-∗2TLWW6-∗ LF1A-∗-2SHY8-∗ LF1A-∗-2SHR8-∗
IlluminationColor White WarmWhite Yellow Red
LuminousIntensity(typ.)(SingleLEDmodule) 6000mcd 4000mcd 4000mcd 2500mcd
ColorTemperature(typ.)/DominantWavelength(typ.) 5500K 2800K 590nm 625nm
ReferenceIlluminance(typ.)at50cm
3LEDs×2rows 190lx 130lx 130lx 85lx
6LEDs×2rows 380lx 260lx 260lx 170lx
12LEDs×2rows 760lx 520lx 520lx 340lx
Note:Insert"U"inplaceof∗ forLEDilluminationunitwithUL/c-UL/CEmarking.
Part No. Development
LF1A-A1-2THWW6
LEDarrangement:A1:3LEDs×2columnsB1:6LEDs×2columnsD1:12LEDs×2columns
LEDilluminationcolorTHWW6:WhiteTLWW6:WarmWhiteSHY8:YellowSHR8:Red
RatedVoltage2:24VDC
(13/02/15)
22
LF1E LED Illumination UnitsLED illumination units for freezer and refrigerated display cases.•LEDlightsourcesachieveenergysaving,longservicelife,re-ducedmountingspace,eliminationofnoise,andlowheatgenera-tion.
•Availablein4lengthsof550,808,1066,and1450mmdesignedtomeetthewidthofdisplaycases.
•3typesoflightdistributioncharacteristicsareavailable;no-lens,condensinglens,andduallens.
•IP54protectionagainstdustandwater.
SpecificationsModel LF1E-A LF1E-B LF1E-C LF1E-D LF1E-E
Length(mm) 292 550 808 1066 1450
RatedVoltage 24VDC(voltagerange:21.6to26.4VDC)
InputCurrent(typ.)(atratedinput) 175mA 350mA 525mA 700mA 950mA
PowerConsumption(typ.)(atratedinput) 4.2W 8.4W 12.6W 16.8W 22.8W
InsulationResistance 100MΩminimum(500VDCmegger)betweeninputandhousing
DielectricStrength 500VAC,1minute
VibrationResistance(damagelimits) Frequency5to55Hz,Amplitude0.17mm
ShockResistance(damagelimits) 300m/s2
OperatingTemperature –40to+40°C(nofreezing)
OperatingHumidity 45to85%RH(nocondensation)
StorageTemperature –40to+70°C(nofreezing)
OperatingAtmosphere Nocorrosivegases
Life(Note1) 40,000hours(Thetotalilluminationdurationwheretheilluminancemaintainsaminimumof70%oftheinitialvaluein25°Cenvironment.)
Weight(approx.)(Note2) 150g 275g 390g 515g 690g
Degreeofprotection IP54
Materials Endcover,conduit:polyamide Cover:polycarbonateCable:PVC Mountingbracket:stainlesssteel
Note1:LEDlifedependsontheoperatingenvironment. Note2:Duallens•UseClass2powersupplywhenusingtheLF1EasUL/c-ULlistedLEDilluminationunit.
LED Optical Specifications (clear lens)IlluminationColor White Warmwhite
ColorTemperature(typ.) 5000K 3000K
ReferenceIlluminance(typ.)(Measuredat0.3mdi-rectlybelowtheunit)
Lens UnitLength Illuminance
No-lens(Note)
292mm 630lx 480lx
550mm 950lx 750lx
808mm 1100lx 900lx
1066mm 1200lx 950lx
1450mm 1250lx 1000lx
CondensingLens(Note)
292mm 1800lx 1400lx
550mm 1950lx 1500lx
808mm 2000lx 1550lx
1066mm 2000lx 1550lx
1450mm 2000lx 1550lx
DualLens Seetheilluminancedistribu-tionchartonpage23.
Note:LEDmodulesandilluminationunitsmayvaryinilluminationcolorsandilluminance.
Part No. Development
LF1E - B 3 S - 2 N A Light Distribution (Lens)
Blank: No lensA: Condensing lensB: Dual lens
Length (mm)A: 292B: 550C: 808D: 1,066E: 1,450
Degree of Protection S : IP54
Cover 3: Clear 4: White Input Voltage
2: 24V DC
LED colorN: White (5000 K equivalent)L: Warm white (3000 K equivalent)
AccessoriesItem PartNo. PackageQuantity
MountingBracket
LF9Z-1SE1PN05 5
•Fivemountingscrewsaresupplied(onemountingscrewisusedforamountingbracket)
•Numberofmountingbracketssupplied:LF1E-B(2),LF1E-C(3),LF1E-D(4)andLF1E-E(4)WheninstallingtheLF1Eunitintheplacesubjecttoexcessivevibrations,supplyadditionalmountingbrackets.
•Seepage23fordimensions.
TM
(13/02/15)
23
LF1E LED Illumination Units
Illuminance Distribution Chart
DimensionsLF1E Illumination Unit Mounting Bracket (supplied)
(LF9Z-1SE1)
Mounting Screw (supplied)
Illumination Chart(referencevalueof5000Kat0.3m.Duallenstypeat50mm.)
Model L A B C DNo.ofMounting
Brackets
LF1E-A 292 327 36 220 220 2
LF1E-B 550 585 30 490 490 2
LF1E-C 808 843 29 750 375 3
LF1E-D 1066 1101 30.5 1005 335 4
LF1E-E 1450 1485 32 1386 462 4
No-lens
No-lens (LF1E-E3S-2N) Condensing Lens (LF1E-E3S-2NA) Dual Lens (LF1E-E3S-2NB)
Condensing Lens Dual Lens X:longside
Y:shortside
6 6
L
A(35)
ø2.1
36
18.8
ø5.
9L
Cable length: 300
40 m
ax.
20 max.
C
Recommended mountingcenters (D)B
M4 × P0.7 tapped holeor ø4.2 hole
Cable
Blue: N (–)
Brown: L (+)
Mounting Bracket(supplied)
Anti-rotation Hole(Use one)
Partially-stripped (×2)18 AWG
Cover End CoverConduit
M4 screw(supplied)
Minimum Radius 24 mm
6 6
L
A(35)
ø2.1
36
18.8
ø5.
9
LCable length: 300
40 m
ax.
20 max.
C
Recommended mountingcenters (D)B
M4 × P0.7 tapped holeor ø4.2 hole
Cable
Blue: N (–)
Brown: L (+)
Mounting Bracket(supplied)
Anti-rotation Hole(Use one)
Partially-stripped (×2)18 AWG
Cover End CoverConduit
M4 screw(supplied)
Minimum Radius 24 mm
1.7
M4 × P0.7
ø8
1.2
max
.10
36
12
35
ø4.2
141.7
M4 × P0.7
ø8
1.2
max
.10
36
12
35
ø4.2
14
Mounting Hole Layout
Y(shortside)image Y(shortside)image Y(shortside)image
0 20 40 60 80 100 (%)90°
45°
0°
45°
90°0 20 40 60 80 100 (%)
90°
45°
0°
45°
90°
Alldimensionsinmm.
Thickness=0.4
Y(m
m)
500
400
300
200
100
-100
-200
-300
-400
-500
0
-750 -650 -550 -450 -350 -250 -150 50 150 250 350 450 550 650 750X(mm)-50
250
500750
100012501500
500400
300
200
100
0
-100
-200
-300
-400
-500
X(mm)
Y(m
m)
-1000 -800 -600 -400 -200 0 200 400 600 800 1000
100012001400
800600
400200
-1000 -800 -600 -400 -200 0 200 400 600 800 1000500400
300
200
100
-100
-200
-300
-400
-500
Y(m
m)
X(mm)
0
400800
12001600
2000
When using mounting bracket
(13/02/15)
24
LF Series Adjustable Angle Mounting BracketMounting angle can be adjusted from 0° to 90°.LED illumination units can be installed flexibly.
•Mountinganglecanbeadjustedfrom0°to90°in10°incre-ments,providingmoreoptionsformountingoftheLEDillumina-tionunits.
•Illuminationanglecanbeadjustedtosuittheoperatorinvariousapplications,suchasvisualinspection.
ApplicationExample
LF9Z-1MB1LF9Z-1MDE1
LF9Z-1MDF1
Hexagonalbolt
Adjustable Angle Mounting Bracket
AdjustableAngleMountingBracketforLF1D/LF1B
PartNo. ApplicableLEDIlluminationUnit Material PackageQuantity
LF9Z-1MDE1 LF1D-E
StainlessSteel 1pair(rightandleft)(mountingscrewssupplied)
LF9Z-1MDF1 LF1D-FLF9Z-1MB1 LF1B-A,-B,-C(not-D)
PartNo. E F G
LF9Z-1MDE1 25±0.2 374±2.0 4-M5
LF9Z-1MDF1 40±0.2 292+4.0 4-M5
LF9Z-1MB1 14 (Note) 4-M4
Note:SameasthemountingholecentersofLEDilluminationunits.
–2.0
LF9Z-1MB1
•UsetheattachedhexagonalboltstofixtheLF1Datthedesiredangle.•SeespecificationsoftheLF1Dforoperatingenvironmentandmechanicalstrength. Alldimensionsinmm.
Dimensions
28
(73)
90°
53
50 13
3666
R45
90°
6236
(87.
5)
975
27.5
77
R60
LF9Z-1MDE1 LF9Z-1MDF1
Mounting Hole Layout4-M5 screws
B
A
50.5
90°
35.2
27
27.5
Safety Precautions
Instructions•LEDmodulesmayvaryinilluminationcolorsandilluminance.•Beforedesigningequipmentandpoweringupilluminationunits,confirmthespecificationsdescribedintheinstructionsheet.
•Applyvoltagewithintheratedvalue,otherwisetheLEDelementsmaybedamaged.
•Theilluminationunitisvulnerabletostaticelectricity.Takesufficientmeasureforprotectionagainststaticelectricityandvoltagesurges.
•Makesurethattheilluminationunitdoesnotfallduringtransportation,installation,andoperation,otherwisedamagemayresult.
•Donotpullorpushthecableoftheilluminationunit,otherwisedamagemayresult.Allowsufficientslacktothecablewhilewiring.
•Donotapplyexcessiveforce.Donotleaveadamagedilluminationunitunattendedoruseadamagedilluminationunit.
•Ensurethecorrectoperatingtemperature.Otherwiseinternaltemperaturerisemayresultindamage.
•Donotuseorstoreinaplacesubjectedtovibrationandshock.
•Donotuseinthefollowingplaces:∗Exposedtodirectsunlight,nearheaters,hightemperatures∗Subjecttochemicals,andcorrosivegases(Plasticilluminationsurface:Ironpowderandoil)∗Basements,greenhouses,orotherhumidplaces∗Coldstoragewarehouses(makesurethatnofreezingoccurs)
•Donotloosenscrews,otherwisetheprotectioncharacteristicswillbeimpaired.
•FortheLF2Dilluminationunits,makesuretoprovidesufficientstrengthformountingpanel.Requiredwaterproofcharacteristicscannotbeobtainedifadistortedmountingpanelisused.
•Tocleanthecover,useasoftclothwithwaterorneutraldetergent.Donotusesolventssuchasthinners,benzene,oralkaline,otherwisediscoloration,deterioration,ordecreaseinstrengthmayoccur.
•Theedgeofthecablesheathisnotwaterproofconstruction.WatermayinvadetheLF1Binacapillaryactionwhenwatersplashesdirectlyontothecablesheath.
•Donotdisassemble,repair,ormodifytheLEDilluminationunit.Otherwiseelectricshock,fire,ormalfunctionmayoccur.
•Turnoffpowerbeforewiring.Makesureofcorrectwiring,otherwiseelectricshockordamagemayresult.
•DonotstaredirectlyintotheLEDilluminationunitwhileitislit,anddonotprojectthelighttootherpeople,otherwiseeyesmaybeinjured.
•LEDilluminationunitisgeneral-purposeindustrialelectricdevice.Donotuseforelectronicequipmentwhichmaydamagethehumanbodyorthreatenlifeincaseamalfunctionorfailureoccurs.
•EnsurethatthecabledoesnottouchtheLEDilluminationunit.
LF Series LED Illumination Units
TM
(13/02/15)
25
EF1A Flameproof LED Illumination UnitsCan be used in hazardous area of Zone 1 and 2, where hydrogen or acetylene gas are present.•Variousmountingstyles.•Condensingordiffusedlightdistributioncharacteristics.•Screwterminal,springclampterminal,andleadwireconnec-tionareavailable.
•IP67(IEC60529)
Ex d II CT4
Explosion-proofClass
SpecificationsPartNo. EF1A-12 EF1A-11
ExplosionProtection ExdIICT4
InstallationArea Zone1,Zone2
RatedVoltage 100to240VAC 24VDC
VoltageRange 90to264VAC 18to26.4VDCPowerConsumption(typ.)(atratedvoltage) 19W 16W
InsulationResistance 100MΩminimum(500VDCmegger)(betweeninputandground)
DielectricStrength 2,000VAC,1minute(betweeninputandground)VibrationResistance(damagelimits) Frequency5to55Hz,amplitude0.5mm
ShockResistance(damagelimits) 1,000m/s2
OperatingTemperature –20to+50°C(nofreezing)
OperatingHumidity 45to85%RH(nocondensation)
StorageTemperature –35to+70°C(nofreezing)
ServiceLife(Note)
Approx.50,000hoursminimum(Thetotalilluminationdurationwheretheillumi-nancemaintainsaminimumof70%oftheinitialvaluein25°Cenvironment.)
DegreeofProtection IP67(IEC60529),IP65(withON/OFFswitch)
MaterialHousing:aluminium,frontpanel/mountingbracket:stainlesssteel,illuminationsurface:reinforcedglass,cablegland:nickel-platedbrass
Weight(approx.) 3.2kg(directmounting)3.4kg(withmountingbracket)
Note:LEDlifedependsontheoperatingenvironment.
Input LightDistribution MountingBracket CableClamp
WaterproofIlluminationSurface
TerminalBlock
ApplicableCableDiameter PartNo.
100to240VAC
Condensing
DirectMountingYes
Clearglass:Blank
Translucentglass:1
Springclamp: BlankScrew: SLeadwire: C
10: ø8toø1012: ø10toø1214: ø12toø1416: ø14toø16
EF1A-12W-No EF1A-12W-W
MountingBracketYes EF1A-12WA-
No EF1A-12WA-W
AngleAdjustableMountingBracket
Yes EF1A-12WB-
No EF1A-12WB-W
Diffused
DirectMountingYes EF1A-12W1-
No EF1A-12W1-W
MountingBracketYes EF1A-12W1A-
No EF1A-12W1A-W
AngleAdjustableMountingBracket
Yes EF1A-12W1B-
No EF1A-12W1B-W
24VDC
Condensing
DirectMountingYes EF1A-11W-
No EF1A-11W-W
MountingBracketYes EF1A-11WA-
No EF1A-11WA-W
AngleAdjustableMountingBracket
Yes EF1A-11WB-
No EF1A-11WB-W
Diffused
DirectMountingYes EF1A-11W1-
No EF1A-11W1-W
MountingBracketYes EF1A-11W1A-
No EF1A-11W1A-W
AngleAdjustableMountingBracket
Yes EF1A-11W1B-
No EF1A-11W1B-W•Specify"T"beforeinthepartnumberforbothinputandoutputendstohaveacablegland.Applicablecablediameteristhesameforbothends.PartNo.example:EF1A-12WT-10
•Specify“P”beforeand“-A2”attheendofthepartnumberwhentheinputendhascableglandandtheoutputendhasON/OFFswitch.PartNo.example:EF1A-121W1P-10-A2
Part No. Development
EF1A–111W1PSA–12W–A2Rated Voltage1:24VDC2:Universalvoltage (100to240VAC)
ON/OFF switchA2:extended (maintained)
Illumination SurfaceBlank:Clearglass1: Translucentglass
Light DistributionBlank:Condensinglight (withlens)1: Diffusedlight (withoutlens)
Cable glandBlank:ClampwithwaterproofW: Clampwithoutwaterproof
Applicable Cable Diameter10:øto10(G1/2)12:ø10to12(G1/2)14:ø12to14(G3/4)16:ø14to16(G3/4)
Cable gland & ON/OFF switchBlank:Cableglandononeend/
withoutON/OFFswitchT: Cableglandonbothends/
withoutON/OFFswitchP: Cableglandononeend/
withON/OFFswitchTerminal BlockBlank:SpringclampterminalblockS: ScrewterminalblockC: Leadwire
Mounting BracketBlank: Without(directmounting)A: WithmountingbracketB: Angleadjustablemounting bracket
Packagequantity:1
TM
(13/02/15)
26
EF1A Flameproof LED Illumination Units
LED Optical SpecificationsIlluminationSurface Clearglass Translucentglass
LensWith(condensinglight)
Without(diffusedlight)
With(condensinglight)
Without(diffusedlight)
IlluminationColor WhiteColorTemperature(typ.) 5,700K
TotalLuminousFlux(typ.) 960lm
ReferenceIllumi-nance(typ.)(at1.0mdirectlybelow)
1100lx 205lx 450lx 175lx
TIIS Certified Products of the Same Model
PartNo. Lens ON/OFFswitch
TIISTypeTestApprovalNo.
EF1A-1∗W With(condensinglight) Without TC19541
EF1A-1∗WP With(condensinglight) With TC19542
EF1A-1∗W1 Without(diffusedlight) Without TC19540
EF1A-1∗W1P Without(diffusedlight) With TC19543
•Samemodelrangeincludesvoltage,illuminationsurfaceglass,cableglandtypeandsize.
Illuminance Distribution at 1.0m (reference value)
Condensing Light (lx) Diffused Light (lx)
1000500200
5020
10
3m
3m
10
10
10
10
200
150
100
50
20
3m
3m400
20010050
20
10
3m
3m
10 10
10 103m
3m150
100
50
20
IlluminationSurface:Clearglass(withlens)
IlluminationSurface:Clearglass(withoutlens)
IlluminationSurface:Translucentglass(withlens)
IlluminationSurface:Translucentglass(withoutlens)
3
58.2
154.2 970
284.2310.2
Axis Center Mounting BracketIllumination Surface
277 B∗A∗
368
M4 GroundTerminal
M4 GroundTerminal
126.
7
10°
68
117.4
W/Angle Adjustable Mounting Bracket
W/Mounting Bracket
Dimensions
∗Seepage27forthedimensionsofAandB.
Alldimensionsinmm.
Illumination Distribution Chart (unit: cd/1000 lm)
Condensing Light Diffused Light
C
B
A
180
150
120
90
60
300
-30
-60
-90
-120
-150
50100150200250300
0
180
150
120
90
60
300
-30
-60
-90
-120
-150
50100150200250300350
0
180
150
120
90
60
300
-30
-60
-90
-120
-150
100200300400500600700
0
IlluminationSurface:Clearglass(withlens)
IlluminationSurface:Clearglass(withoutlens)
IlluminationSurface:Translucentglass(withlens)
IlluminationSurface:Translucentglass(withoutlens)
180
150
120
90
60
300
-30
-60
-90
-120
-150
500
1000
1500
2000
0
A-A
AC
B
B-BC-C
3
58.2
154.2
284.2310.2
970
277 B∗A∗
3.0
55
104.0
99.4
Axis Center Mounting BracketIllumination Surface
M4 GroundTerminal
M4 GroundTerminal
(13/02/15)
27
EF1A Flameproof LED Illumination Units
53 to 60
E
øC
D
B=23
A/B: 53 to 60 With ON/OFF Switch: B only
52.5 to 59.5
ø26.
5 (G
1/2)
ø31.
5 (G
3/4)
E
øC
D
B=23A/B: 52.5 to 59.5
With Cable Gland: A or B Without Cable Gland: B only Dimensions (mm) CableGlandCode
ApplicableCableDiameterX
Dimensions ClampWater-proofC D E(∗)
10 8<X≤10 42 40 G1/2(16)
With12 10<X≤12 42 40 G1/2(16)14 12<X≤14 42 40 G3/4(22)16 14<X≤16 42 40 G3/4(22)10W 8<X≤10 30 27 G1/2(16)
Without12W 10<X≤12 30 27 G1/2(16)14W 12<X≤14 33 30 G3/4(22)16W 14<X≤16 33 30 G3/4(22)
∗:Nominalsize
3
58.2
154.2
277 B∗A∗
37.5
82
150
57
4-M6 Effective thread: 9
Axis CenterIllumination Surface
M4 Ground Terminal M4 Ground Terminal
Mounting Hole Layout
289 ±4
70 ±
0.2
4-ø8.2
57 ±
0.3
150 ±0.4
4-ø6.2
Direct Mounting
Direct Mounting
With Mounting Bracket
Alldimensionsinmm.
Safety Precautions•Donotdisassemble,repair,ormodifytheLEDilluminationunit.Otherwiseelectricshock,fire,ormalfunctionmayoccur.
•Specialexpertiseisrequiredtoinstall,operate,maintain,andinspecttheEF1A.Peoplewithoutsuchexpertisemustnotusethe
EF1A.Otherwiseelectricshocks,damage,ormalfunctionmayresult.
•ReadthiscatalogandinstructionsheetcarefullybeforeusingtheEF1A.
Installation Area1. DegreeofprotectionfortheEF1AisIP67(withON/OFFswitch:
IP65).Donotuseinharsherenvironment.2.Operatingtemperatureis–20to+50°C.Whenthesurface
temperatureofEF1Amightexceed+50°Cduetodirectsunlight,provideashadetokeepthesurfacetemperaturebelow+50°C.
3.WheninstallingtheEF1A,observesafetystandardsandregulationsoftherelevantcountryorregion.
Installation1. Fordirectmountingwithoutmountingbracket,usefourM6bolts.
Whenusingmountingbrackets,usefourM8boltsorinstallfirmlysothatequivalentmountingstrengthisprovided.Mountingbracketis3mmthick(seedimensions).Recommendedtighteningstrengthisasfollows.M6:3.9to5.4N·m,M8:10to13.5N·m.
2.Ifboltlooseningisexpectedduetovibrations,usespringwashers.
Installing/Removing the End Cover1.Whenremovingtheendcover,useahexkeysuppliedwiththe
EF1Atoremovetheendcoverbolts(M6×18hexsocketheadcapboltwithspringwasherandplainwasher).Donotlosetheendcoverbolts.
2.Theendcoverisinsertedintothehousing.Wheninstallingtheendcover,makesurethattheendcoverisinsertedstraight.
3.Wheninstallingtheendcover,observethefollowings.·Noforeignobjectsareonthegasketorjointsurface.
·Thegasketisinplace.·Thewiresarenotcaughtbetweenthejointsurfaces.Installtheendcoverslowlyandtightenscrewstoatorqueof3.9to5.4N·m.
Note:Makesurethattheboltsaretightenedsecurely.
Drawing a Cable•UsetheflameproofpackingtypecableglandsuppliedwiththeEF1A.Refertothedimensions.See“ConnectingaCabletotheFlameproofPackingTypeCableGland”fordetails.
•Whenchoosingacable,takemaximumoperatingtemperatureandchemicalresistanceofinsulatorandsheathintoconsider-ation.Theinsideofcablemustbeassolidaspossibletopre-ventingressofexplosivegasthroughthecable,andsmoothonsurfaceandroundincross-section.Whenchoosingthesizeandinsulationmaterial,takethetemperatureriseofcableintoconsid-eration.
•Protectthecableagainstexternaldamagebyencasinginametalconduit,orinametal/cementduct.
Instructions
∗SeebelowforthedimensionsofAandB.
(13/02/15)
EF1A Flameproof LED Illumination Units
Wiring
Applicable Wire•Stranded wire: 0.5 to 2.0 mm2, Solid wire: ø0.5 to ø2.0 mm2
(AWG16-12)•Connect one wire to one terminal. When connecting an insulated
wire to the terminal block, use a crimping terminal with insulation sheath. Bare crimping terminal must be insulated with an insula-tion tube or making tube. Make sure not to apply excessive force to the terminal block when installing the end cover.
Applicable Crimping TerminalScrew Terminal(Ring Terminal)
Spring Clamp Terminal (WAGO: 741-302)
6.0
max
5.3 min
ø3.2
min.
Withoutinsulation sheath
Withinsulation sheath
Reccomended ferrule (WAGO)Ferrule with insulation sheath: 216-204Ferrule without insulation sheath: 216-104Crimping too: 206-204
InsulationSheath
Wire
8.0 max
1.8
max
(Dimension after crimping)
8.0 max.
1.8
max
(Ferrule)
Recommended Tightening Torque•Screw terminal block (M3): 0.5 to 0.8 N·m
Wiring Cable Grand on Both Ends•A maximum of four EF1A can be connected. Do not connect
more than four EF1As, otherwise the input current may exceed the limit.
Protective Grounding•Ground the EF1A according to the environment and ratings of the
application. Observe the regulations of the relevant country or region where the EF1A is used.
•Use the M4 grounding terminal inside the EF1A and make sure that the ground resistance value is under 100Ω.
•When not using the M4 grounding terminal inside the EF1A, use the external M4 grounding terminal. Recommended tightening torque (M4): 1.4 to 2.0 N·m.
•Use a wire in size and material which is durable against the maximum expected grounding current. Protect the grounding wire against external damage by encasing in a metal conduit.
Connecting a Cable to the Flameproof Packing Type Cable Gland•When choosing a cable, take maximum operating temperature
and chemical resistance of insulator and sheath into consider-ation. The inside of cable must be as solid as possible to pre-vent ingress of explosive gas through the cable, and smooth on surface and round in cross-section. When choosing the size and insulation material, take the temperature rise of cable into consid-eration.
•Protect the cable against external damage by encasing in a metal conduit, or in a metal/cement duct.
Parts Description(Part number without W on cable gland)
Gasket
Washer
Nut Ring
End Cover
Clamp Plate
Gland
Gland Set Screw
Connecting a Cable1. Make sure that the cable gland matches the cable diameter.
If not, replace the cable. Or replace the EF1A with one that has the cable gland with matching cable diameter.
2. Remove the parts from the end cover in the order of nut, ring, gland, washer, and gasket. The gland can be removed by loosening the gland set screw using the hex key (size 2).
Hex Key (size 2)
Cable
3. Loosen the clamp plate screws. Pass the cable through the nut, ring, gland, washer, and gasket.
4. Place the gasket and washer in the end cover, and screw in the gland to compress the gasket. Tighten the gland until the cable does not move when pulled out lightly, and tighten further one full turn. If the clamp plate is in the posture which is difficult to be approached by a screwdriver, turn the gland for ±1/3 turn. Tighten the gland set screw. Tighten the clamp plate set screws equally to fixate the cable.
Gland Set Screw
Clamp Plate Screw
5. Screw the nut into the end cover.(Part number without W on cable gland)•Connect the cable in the same manner as described above.
Gasket
Clamp Plate
Gland
End Cover
Washer
Gland Set Screw
IDEC CORPORATION (USA)1175 Elko DriveSunnyvale, CA 94089-2209, USATel: +1-408-747-0550 / (800) 262-IDEC (4332) Fax: +1-408-744-9055 / (800) 635-6246E-mail: [email protected]
IDEC CANADA LIMITED3155 Pepper Mill Court, Unit 4Mississauga, Ontario, L5L 4X7, CanadaTel: +1-905-890-8561Toll Free: (800) 262-IDEC (4332) Fax: +1-905-890-8562E-mail: [email protected]
IDEC AUSTRALIA PTY. LTD.Unit 17, 104 Ferntree Gully Road,Oakleigh, Victoria 3166, AustraliaTel: +61-3-8523-5900, Toll Free: 1800-68-4332Fax: +61-3-8523-5999E-mail: [email protected]
7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, JapanTel: +81-6-6398-2571, Fax: +81-6-6392-9731E-mail: [email protected]
Specifications and other descriptions in this catalog are subject to change without notice.
Cat. No. EP1476-0 FEBRUARY 2013 PDF
IDEC ELECTRONICS LIMITEDUnit 2, Beechwood, Chineham Business Park, Basingstoke, Hampshire RG24 8WA, UKTel: +44-1256-321000, Fax: +44-1256-327755E-mail: [email protected]
IDEC ELEKTROTECHNIK GmbHWendenstrasse 331, 20537 Hamburg, GermanyTel: +49-40-25 30 54 - 0, Fax: +49-40-25 30 54 - 24E-mail: [email protected]
IDEC (SHANGHAI) CORPORATIONRoom 701-702 Chong Hing Finance Center, No. 288 Nanjing Road West, Shanghai 200003, PRCTel: +86-21-6135-1515 Fax: +86-21-6135-6225 / +86-21-6135-6226E-mail: [email protected]
IDEC (BEIJING) CORPORATIONRoom 211B, Tower B, The Grand Pacific Building, 8A Guanghua Road, Chaoyang District, Beijing 100026, PRCTel: +86-10-6581-6131, Fax: +86-10-6581-5119
IDEC (SHENZHEN) CORPORATIONUnit AB-3B2, Tian Xiang Building, Tian’an Cyber Park, Fu Tian District, Shenzhen, Guang Dong 518040, PRCTel: +86-755-8356-2977, Fax: +86-755-8356-2944
IDEC IZUMI (H.K.) CO., LTD.Units 11-15, Level 27, Tower 1, Millennium City 1, 388 Kwun Tong Road, Kwun Tong, Kowloon, Hong KongTel: +852-2803-8989, Fax: +852-2565-0171E-mail: [email protected]
IDEC TAIWAN CORPORATION8F-1, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih District, 22101 New Taipei City, Taiwan Tel: +886-2-2698-3929, Fax: +886-2-2698-3931E-mail: [email protected]
IDEC IZUMI ASIA PTE. LTD.No. 31, Tannery Lane #05-01,HB Centre 2, Singapore 347788Tel: +65-6746-1155, Fax: +65-6844-5995E-mail: [email protected]
www.idec.com (13/02/15)