led high bay manufacture industry / shenzhen betop
TRANSCRIPT
www.betop-led.com
Betop LED High Bay
www.betop-led.com
Be a little bit cool…
Pure aluminum heat sink by cold forging technologyPure aluminum heat sink by cold forging technology
Raw material: 1070 pure aluminum; purity 99.9% aluminum
Thermal conductivity index reach to 226w/mk
The heat dissipation speed is 3 times faster than die-casting
Processing technology: One-piece aluminum plate into hydraulic machine, shaped by punching; one-time finished
Surface treatment: Electrophoresis; 1) we can control the thickness of the coating by electric current strength, to make balance between heat dissipation and surface endurance; 2) anti-corrosion, even working in tough environment
Weight: Pure aluminum heat sink is much more lighter than others like alloy aluminum
Cost: Although cold forging is expensive than die-casting and CNC, but aluminum purity is higher and heat dissipation is much better, so we can use relatively less materials. The result is that the entire cost is lower than die-casting or CNC. That is the reason why our price is much more competitive than others BUT heat dissipation is much better.
www.betop-led.com
Cold forging VS Die-castingCold forging VS Die-casting
Be a little bit cool…
www.betop-led.com
1070 type Pure Aluminum Advantages: 1. Low density, 99.99% purity, light weight.2.Cold-forging technical3. Excellent heat conductive index of 226w/m·k4. Anodic oxidation surface-treatment, anti-corrosion
Thermal conductivity index: It is used to describe the heat transmission speed inside the materials. The higher it is, the more heat can be transmitted to the surface at the same time.Pure aluminum: 226w/m·kDie-cast aluminum: 60-90w/m·kPlastic heat sink: 2-15w/m·kHeat dissipation speed of pure aluminum is 3 times faster than die-casting. Betop heat sink is the most efficient in the market.
Heat sink raw materials---1070 pure aluminum; purity 99.9%
Be a little bit cool…
www.betop-led.com
Heat sink process---Tooling mould
Be a little bit cool…
Advantages: Betop purchased tooling machines to speed up the tooling process. All products of our company is private model.
www.betop-led.com
Heat sink process---Cold forging by hydraulic machine
Advantages: 1. Raw material: pure aluminum2. One-piece aluminum plate shaped by punching3. One-time finished4. Production capacity: 20,000pcs per month
Be a little bit cool…
www.betop-led.com
Betop Hydraulic Machine
3000T1500T
600T
Be a little bit cool…
www.betop-led.com
Heat sink surface treatment---Electrophoresis
Advantages: 1) we can control the thickness of the coating by electric current strength, to make balance between heat dissipation and surface endurance; 2) anti-corrosion, even working in tough environment
Be a little bit cool…
www.betop-led.com
PCBPCB
Be a little bit cool…
Advantages:We use new top quality LED PCB. Heat conductivity index reach to 7w/mk, contrasting other suppliers only 2w/mk. By such improvement the solder point temperature is lowered by 10℃. To make it easy to understand, as you know, the lumen output of led is separated into cold lumen and hot lumen, and normally hot lumen will be 8-10% less compared to cold-lumen, which cause the efficiency of led chip will be lower when temperature rise up. But after we adopted this kind of new PCB, we see only 3% difference, which means the working temperature is well managed. On the other hand, the painting on surface of new PCB is bright with high reflection rate, which increase lumen efficiency by 2%.
www.betop-led.com
High Bay MeanWell Driver
MeanWell driver HBG series.5years warranty.Purchase directly from Taiwan MeanWell.
www.betop-led.com
High Bay lighting source
Nichia 757G series SMD originally packaged in Japan
www.betop-led.com
Betop Industrial LightingBetop Industrial Lighting
Be a little bit cool…
LED High Bay
IF series square high bay
Thunder series high bay
HiLumen series high bay
LensOn series high bay
Magic series modular high bay
High voltage 347V/480V high bay
www.betop-led.com
Thunder series high bayThunder series high bay
Be a little bit cool…
(60W/100W/150W/200W)
www.betop-led.com
(100W/150W/200W/240W/300W)
HiLumen series high bayHiLumen series high bay
www.betop-led.com
LensOn series high bayLensOn series high bay
Be a little bit cool…
(100W/150W/200W)
60Deg 100Deg 60*100Deg
www.betop-led.com
High voltage series high bayHigh voltage series high bay
Be a little bit cool…
(100W/150W/200W)
www.betop-led.com
Magic series modular high bayMagic series modular high bay
Be a little bit cool…
100W-300W is for your option
www.betop-led.com
IF series flat high bayIF series flat high bay
0.6M: 50W/100W/150W1.2M: 100W/200W/300W