led handrail
TRANSCRIPT
For years, designers have been searching for an ADA compliant handrail
that delivers ANSI compliant illuminance levels.
luxrail™
LED HANDRAIL
36
io Lighting 1100 Busch Parkway Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com io Lighting 1100 Busch Parkway Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
LED HANDRAIL • luxrailTM
Rio Hondo Pedestrian BridgeDesigner: Steven Ehrlich ArchitectsPhotographer: Manuel Jaramillo
345 Park AvenueDesigner: Jaros Baum & BollesPhotographer: Dave Pickettluxrail grab bar
BART Train StationPhotographer: Dave Pickett
LED HANDRAIL • luxrailTM
Fountain Square ParkDesigner: Tillett Lighting DesignPhotographer: Dave Pickett
401 E MichiganDesigner: Gary Steffy Lighting DesignPhotographer: Carr Cialdella Photography
345 Park AvenueDesigner: Jaros Baum & BollesPhotographer: Dave Pickett
Lake Forest High SchoolDesigner: Perkins & WillPhotographer: Dave Pickett
Eden Roc HotelPhotographer: Dave Pickett
luxrail™ is an LED-based illuminated handrail. This energy efficient,
sustainable solution finally addresses the building industry’s need for an
ADA compliant handrail that produces ANSI required illumination levels
for both interior and exterior stairs, ramps and pedestrian walkways.
luxrailTM
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
ApplicationANSI and ADA compliant, luxrail is an indoor/outdoor LED-based handrail that delivers functional illumination. Two intensities may be specified: standard output and high output. The standard light output version delivers illuminance levels appropriate for exterior applications (2 footcandles at grade) as well as for dark interior environments with low ambient illumination levels (e.g., themed environments, theatres and residential areas). The high output version delivers illuminance levels applicable to interior environments – providing in excess of 10 footcandles along the path of egress (ANSI required for stair treads). Independent photometric test reports and IES Format data are available at www.iolighting.com.
luxrail’s standard handrail gripping surfaces are circular in cross section and meet 2004 ADAAG (Americans with Disability Act Accessibility Guidelines). Patented optical assemblies deliver 10˚, 45˚ and 65˚ beam spreads. The 45˚ and 65˚ beam patterns are most suitable for illuminating pathways, while the 10˚ beam spread offers accent lighting for optional glass or stainless steel cable railing infills. Reference page 44 of this catalog for information regarding infill options. io ensures that each LED is provided thermal and electrical management properties in accordance with the LED manufacturers recommendations. Projected average rated life is 50,000 hours at 70% of lamp lumen output. Contact factory for IES LM-80 compliance. To ensure proper performance, architectural details should allow for ventilation and air flow around the fixture. Ambient temperature surrounding the fixture shall not exceed 120˚F (48.9˚C).
Light OutputTwo luminous intensities are available for white light. All values below are initial lumens per foot. IES LM-79 format files may be obtained from the factory or downloaded from www.iolighting.com.
Constructionluxrail may be post mounted or wall mounted. Mounting hardware (post or wall) is typically required up to 5' O.C., depending on the handrail alloy. Final post and wall bracket spacing must be determined by a licensed architect or structural engineer. io can provide engineering upon request. luxrail is available in stainless steel and aluminum. grab bars are available in aluminum only. The lighting fixture component of the luxrail is a stand alone unit and is available in incremental nominal lengths that range from 6" to 60". Vandal resistant access chamber allows units to be removed for maintenance purposes.
All handrail component parts are engineered for quick installation. Field welding or cutting is typically not required. All parts are prefabricated to field dimensions and are assembled in the field with mechanical connection or epoxy. Contact io Lighting for recommended handrail installers. The light fixture’s housing is made of a light weight, yet durable aluminum, providing the recommended heat sink requirements for the LEDs. Housing, patented optical assembly and stainless steel end caps are bonded to prevent water infiltration.
Electricalluxrail houses a low voltage LED-based light fixture that is integrated into the underside of the handrail. 24 volt 96 watt power supplies are provided as a standard. For detailed information regarding daisy chain limitations, remote distance limitations, power supply options, and dimming options consult the io website, the io catalog (pages 98-100) or an io representative.
Dimming modules must be specified separately. For detailed information, see page 98 of this brochure or download the power supply specification sheet from www.iolighting.com.
Power Consumption Standard Output: 1.44 w/ft High Output: 7.62 w/ft
Power consumption does not include power supply losses.
luxrailTM
Dim
ensi
ons
Lighting Facts™
LED Product 0
io 1 2 3 4 5 6 7 8
Lig
ht O
utpu
t / D
istr
ibut
ions
Mou
ntin
g /
Infil
l Opt
ions
9
PM (post mounted) Glass infill(glass provided by others)
Stainless steel cable infill(only available on flat surfaces)
4.6 2.0 .75 .38 .19 9.9 3.1 1.19 .64 .3311.2 3.2 1.2 .57 .295.7 2.0 .70 .34 .15
5' 4' 3' 2' 1' 1' 2' 3' 4' 5' 5' 4' 3' 2' 1' 1' 2' 3' 4' 5'
BEAM SPREAD OPTIONS
WALL MOUNT DETAILS*
10
POST MOUNT APPLICATION
LIGHT OUTPUT - 65 DEGREE WARM WHITE
WM (wall mount intermediate)
06
* Wall mounted luxrail may be mounted to new or existing guardrail (by others).
Post and wall bracket spacing must be determined by a licensed architect or structural engineer.
1. PRODUCT FAMILY06 luxrail
2. ALLOY / FINISHSSS Stainless steel satin SSP Stainless steel polishedCAA Clear anodized aluminum (7)
3. SIZE1 1.66" O.D. (11⁄4" pipe size) (7)
(available for SS & CAA) 2 1.90" O.D. (11⁄2" pipe size) (available for SS & CAA)
4. MOUNTINGPM Post mounted (7)
WM Wall or guard rail mounted
5. INFILLAC Stainless steel cable (5) GL Glass (provided by others)C CustomNR Not required
6. LIGHT DISTRIBUTION10 10 Degree45 45 Degree65 65 DegreeNI Handrail only (not illuminated)
7. LIGHT COLOR27K Warm White3K Warm White (3)
5K Cool White (3))
27KHO Warm White3KHO Warm White (3)
5KHO Cool White (3)
R Red(4)
G Green(4)
B Blue(4)
A Amber(4)
8. LENGTHGB2 2' nominal(8)
GB3 3' nominal(8)
GB4 4' nominal(8)
GB5 5' nominal(8)
HR In Feet / Inches (provide overall length
of each handrail section)(2)(6)
9. VOLTAGE / DIMMING1 120v2 277v3 120v w/dim4 277v w/dim5 Other
10. SPECIFY DRIVER / DIMMING(1)
Note: If not specified otherwise, io will supply 96 watt drivers. Download Power Supply specification sheet from www.iolighting.com.
Orde
r Co
de1. Power Supply Specification Sheet may be downloaded from www.iolighting.com.2. Each handrail application will be custom to accommodate varying field conditions and
design requirements. Shop drawings will be required to manage specifics of each handrail section.3. White light variance between LEDs within a single fixture will not exceed ANSI Binning Standards.4. Only available in 7.6 w/ft.5. Stainless Steel cable available for flat surfaces only.6. Detailed elevation drawings of handrail section are required for quote.7. grab bars available in aluminum only.
Foot
note
s
Standard Output48 lms/ft48 lms/ft63 lms/ft
High Output180 lms/ft180 lms/ft240 lms/ft
2700K White:
3000K White:
5000K White:
1"
25.4mm
1"
2.54cm
For Metric Conversion
1'
0.3m
1.66"(42.2mm)
1.90"(48.3mm)
22 AWG, 300v power cord Power cord for secondary feed.Wire gauge as required for remote driver.
Locking Bracket Mount
22 AWG, 300v power cordWireway
Snap-Cover Flange
Snap Base
Tube Extension, as needed for conduit connection
To remote driver
60"(1.5m)
Note: 4' to 5' typical
34"(0.86m)
IDA’s Fixture Seal of ApprovalWildlife Friendly Fixtures
Color
WhiteWhiteWhite
Nominal CCT
2700K3000K5000K
Target CCT &Tolerance (K)
2725 ±1453045 ± 1755028 ± 283
SSL Chromaticity Standard: ANSI C78.337
luxrail light fixture
65˚ 45˚ 10˚
For Amber only.36"
(.9m)
4.6 2.0 .75 .38 .19 9.9 3.1 1.19 .64 .3311.2 3.2 1.2 .57 .295.7 2.0 .70 .34 .15
5' 4' 3' 2' 1' 1' 2' 3' 4' 5' 5' 4' 3' 2' 1' 1' 2' 3' 4' 5'
42"(1.06m)
io luxrail 65°, 3KHO
24420.9
11
72
3027 (Bright White)
6PRA-7ZBT8B
0.03.I.3KHO.65.1.05.2
Outdoor path lights
Label references 30" luxrail fixture with a 65˚ beam spread in High Output 3000K. Lighting Facts for additional beam spreads and light output levels may be obtained from io Lighting.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.comio Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Wall Mount Handrail Options
RAMPS Ramp handrail wall returns may be specified with a 12" extension. io requires field verified “horizontal” and “diagonal” ramp dimensions in order to generate shop drawings. Additional field dimensions may be required depending on the complexity of the handrail design.
Posts are chosen to match or complement your handrail selection. Posts are spaced between 4' and 5' on-center depending on specified size and alloy. Posts may be surface mounted or embedded below concrete surface and set with quick-setting grout by contractor. Base plates are optional.
Post Mount Options
Surface Mounted Embedded
Cover Flange
41⁄2"(114mm)
13⁄1
6"(2
1mm
)
1" (2
5mm
)
Clear Hole for 3⁄8" bolts(9.6mm)
31⁄4" diameterBolt Circle(82.5mm)
Flange Base
Concrete
Rocktite
Slip Flange with or without set screw
1⁄2" or 3⁄4" Conduit
(13mm or 19mm)
Return to Walking Surface
Return to Post
ADA Compliant Return Options
401 E. MichiganDesigner: Gary Steffy Lighting DesignPhotographer: Nelson Nave
Mississippi River Overlook Designer: HOK Photographer: Dave Pickett
345 Park AvenueDesigner: Jaros Baum & BollesPhotographer: Dave Pickett
Lake Forest High School Designer: Perkins & Will Photographer: Dave Pickett
Eden Roc Hotel Photographer: Dave Pickett
12"(0.3m)
6"(0.15m)
3.25" (83mm)
Wall Return
Ext. Wall Return
3.25" (83mm)
12"(0.3m)
6"(0.15m)
3.25" (83mm)
Wall Return
Ext. Wall Return
3.25" (83mm)
Horizontal
Elevation Change
6" (0.15m)
10" (0.15m)
Diagonal
Slope
Horizontal
Elevation Change
Diagonal
Slope
STAIRS Stair handrail wall returns may be specified with a 12" extension. io requires field verified “horizontal” and “diagonal” stair dimensions in order to generate shop drawings. Additional field dimensions may be required depending on the complexity of the handrail design.
12" min(0.3m)
12" min(0.3m)
1 tread width
12" min(0.3m)
12" min(0.3m)
1 tread width
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.comio Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
505.7.1 CIRCULAR CROSS SECTION
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 11⁄4" (32mm) minimum and 2" (51mm) maximum.
The following references are taken from the 2004 Americans with Disabilities Act Accessibility Guidelines.
Capital One Designer: Oglesby Holtman DesignPhotographer: Dan Kohnen
Handrail Dimensions
Custom luxrail grab bar lengths can be specified to accommodate all ADA Compliant applications
Shower StallsBath TubsWater Closets
Length Options
Application Options
Standard grab bar lengths may be ordered available in nominal lengths of 2', 3', 4', and 5'.
grab bar may be customized to accommodate ADA lighting or aesthetic requirements. Submit concept sketches to io Lighting for design assistance.
Standard grab bar
Custom grab bar
Custom grab bar
12"
36" min
36" min
12"
12"
54" min
54" min
17"-19"19" min 33"-36"
48" min12" max
33"-36" 33"-36"
15" max
9"
Back Wall
Side Wall
With Seat at Head of Tub
Back
24" min12" max
33"-36"
15" max
9"33"-36"
24" min
27" max
Control Area
38" min48" max
33"-36"
Railings shown are not to scale.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.comio Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Transition Sleeve
luxrail integrates a low voltage LED-based linear light fixture within the handrail. luxrail requires a power supply to transform and regulate the voltage. This power supply is called a “driver.”
The luxrail requires that the 24v driver be remotely located. The driver must be housed in an enclosure that is rated for use in both interior and exterior applications. luxrail utilizes a compact electronic driver which is protected against open circuit, short circuit, overload and overheating conditions. It is UL recognized and FCC compliant.
Electrical
When a handrail is installed on ramps, stairs or landings 30" above finished floor – it is referred to as a “guardrail.” Handrails provide guidance, while guardrails prevent accidental falls. Guardrails have opening limitations. The most common requirement is that no opening be large enough to allow a4" sphere to pass. luxrail has two infill options to address this requirement: stainless steel cable and glass. Stainless steel cable and all required hardware are supplied with system. For glass infill option, panel clips are supplied with system; glass is supplied by others.
GLASS INFILL
Panel clips are used to support 1⁄4" or 1⁄2" tempered glass infill panels. Glass is provided by others.
STAINLESS STEEL CABLE INFILL
Stainless steel cable railing system integrates all cable hardware inside the end posts, making it virtually invisible. The cable railing system may only be usedwith the stainless steel railing frame. Stainless steel railing hardware can be factory swaged or field swaged by the installer. Cable infill is only available for flat surfaces.
Infill Options
io Studio Photographer: Dave Pickett
Light Backing Pad
Feed Termination
Slotted Tube Insert
Secondary Feed Routed through
Wall Bracket
Light Mounting Clip
Wall Mount Bracket
io Luxrail LED Fixture
22 AWG, 300 Volt Power Cord
Wire Nut Connections within Wireway
Driver with Enclosure
96-Watt DriverWITH DIMMING OPTIONIO PART#: DR96MGD
WITHOUT DIMMING OPTIONIO PART#: DR96MGND
Key Features Recommended for long
continuous runs Suitable for dry, damp and
wet locations Built in wiring compartments
for easy installation Built in EMI Filter for low noise
SpecificationsLocation: Wet IP65Output Voltage: 24v DCOutput Power: 200wInput Voltage: 90 to 264 VAC Frequency: 47 to 63 HZAmbient Temp: -20˚C to +50˚CWeight: 6.61 lbsDimming: Yes w/ 250IOXFDIM. Requires one dimming module for each channel.
200-Watt DriverIO PART#: DR2ØØAM
Key Features Integrated dimming available Suitable for dry, damp and
wet locations Locations with an adequate
end plate and connectors Built in wiring compartments
for easy installation
SpecificationsLocation: Wet IP66Output Voltage: 24v DCOutput Power: 96wInput Voltage: 100 to 277 VAC Frequency: 47 to 63 HZAmbient Temp: -30˚C to +70˚CDimming: Integrated Available
SpecificationsLocation: Wet IP66Output Voltage: 24v DCOutput Power: 60wInput Voltage: 90 to 264 VAC Frequency: 47 to 63 HZAmbient Temp: -30˚C to +70˚CDimming: Integrated Available
60-Watt Driver WITH DIMMING OPTIONIO PART#: DR6ØMGD
WITHOUT DIMMING OPTIONIO PART#: DR6ØMGND
Key Features Small enclosure size Light weight, low profile Short circuit and overload
protection Low power supply losses
SpecificationsLocation: DryOutput Voltage: 24v DCOutput Power: 20wInput Voltage: 120 to 240 VAC Frequency: 50 to 60 HZAmbient Temp: -20˚C to +50˚CWeight: .21 lbsDimming: Yes w/ 250IOXFDIM
20-Watt DriverIO PART#: DR2ØOS
Key Features Integrated dimming available Suitable for dry, damp and
wet locations Locations with an adequate
end plate and connectors Built in wiring compartments
for easy installation
Note: See page 98 for more information or contact an io representative.
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.comio Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Rubber O-ring
Glass Supported PinInstall through predrilled hole in the glass (optional)
2 1/8"(54mm)
2 1/4"(57mm)
Code Details
ACCESSIBILITy GUIDELINES
Two references:1) ICC/ANSI A117.1: Accessible And Usable Buildings & Facilities2) The Americans with Disabilities Act Accessibility Guidelines (ADAAG) Note: ADA is a civil rights law – it is not a building code. However, the ADAAG has been incorporated into many state and local building codes.
ILLUMINANCE LEvEL REqUIREMENTSIBC: 1 footcandle for means of egress for emergency lighting. IRC: Light level not specified.ANSI A117: Stairways shall have 10 footcandles measured at the
center of the tread surface and on landing surfaces within 24" of step nosing.
Accessibility Code References
ICC: International Code Council
BOCA: Building Officials Code Administration
ICBO: International Conference of Building Officials
SBCCI: Southern Building Code Congress
IBC: International Building Code
IRC: International Residential Code
Prior to 2000, BOCA, SBCCI and ICBO each prepared their own model codes that were regionally applied. In 1999, these three organizations merged to form the International Code Council (ICC).
In 2000, the ICC published the International Building Code (IBC) and the International Residential Code (IRC). The IRC and the IBC model codes have since been adopted by states throughout the U.S.
Sustainability io Recommends Aluminum
ANSI Compliant Illumination Levels Handrails and GuardrailsHANDRAILS PROvIDE GUIDANCE
Handrails are located between 34" and 38" above stair nosings or ramp surfaces and have dimensional limitations for graspability. In areas where children are the principal users (e.g., elementary schools), the ADAAG recommends a second set of handrails be located at 28" above stair nosings or ramp surfaces.
Reference: IBC 2000, ANSI A117.1, ADAAG
GUARDRAILS PREvENT ACCIDENTAL FALLS
Guardrails are generally required for ramps, stairs or landings above 30". The height will vary depending on local code. The IBC requires a guardrail to be 42" in height. If a 42" guardrail is called for on a stair or ramp, it will require a handrail at a height of between 34" and 38". The IRC requires 36" high guardrails for porches, balconies and raised floor surfaces. A guard’s top rail does not have to meet the requirements for graspability if a handrail is in place.
Capital One Designer: Oglesby Holtman DesignPhotographer: Dan Kohnen
GREEN
Aluminum is one of the most sustainable materials on earth. Making up 8% of the Earth’s crust, Aluminum is one of the most plentiful elements and most preferred building material because it can be indefinitely recycled without loss of properties or quality.
DURABLE
Aluminum generates a protective oxide coating which makes it naturally corrosion resistant, weather proof and immune to harmful effects of UV rays. Requiring little to no maintenance, Aluminum does not absorb moisture and is saltwater resistant. It will not rust, rot, swell, warp, twist, split or crack.
ROBUST
Aluminum is about one-third the weight of steel yet its tensile strength is perfect for handrails, curtain walls, window frames, wall framing systems and solar shading.
LEED
Although recycled material percentages constantly change, approximately 25% of io’s aluminum handrail comes from recycled pre-consumer aluminum.
FINISH
Aluminum can be anodized or painted in any color. Some surface finishes can offer increased durability and corrosion resistance. Consult io Lighting for details.
Clear Anodized Aluminum Caprail
Rio Hondo Pedestrian Bridge Designer: Steven Ehrlich ArchitectsPhotographer: Manuel Jaramillo
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.comio Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Mississippi River OverlookDesigner: HOKPhotographer: Dave Pickett
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
luxrail crosses into two separate sections of the architectural specification – both as handrail which is listed in the “Miscellaneous Metals” section and as lighting which is listed in the “Electrical” section. As such, it requires two different trades for installation: an experienced handrail installer and a licensed electrician. It is important that contractors understand that luxrail must be bid on and installed by two separate trades to ensure accurate labor estimates. On some projects, architects have created an entirely new and separate section of the specification package for luxrail, spelling out exactly how the bidding and installation need to be handled.
When requesting a quote for luxrail, fully dimensioned plan and elevation drawings of each individual railing section are required. Stair and ramp elevations can be found in the Architectural details. Exterior railing locations and elevations are usually shown in the Landscape plans and details. The elevations illustrate the required style, size and features of each railing. The plan views show the location, length and quantity of rails needed. The lighting fixture schedule should also be provided as it lists the desired light output, color and distribution. From these project specific details a customized quotation is created.
After an order is placed, detailed submittal drawings are prepared and sent to the customer for approval. The submittals must be reviewed for compliance with site conditions, conformance with lighting specification and fulfillment of the electrical power requirements. This may require review by several parties.
The lead-time on luxrail fixtures begins once the signed approval drawings have been returned. Once approved, luxrail is custom fabricated to the exact project details and specifications as illustrated in the approvals.
Submittals should be reviewed with three objectives in mind:1. The handrail drawings must be reviewed for compliance to site conditions. Finished stair and ramp dimensions usually vary from the architectural plans. For this reason, actual field dimensions must be used when reviewing the submittals. This portion of the review is typically done by the handrail installer. Contact io Lighting for approved luxrail installers.
2. The LED fixture counts and run lengths must be reviewed to verify that adequate power is provided to each railing and that all remote driver restrictions have been met. This portion of the review is typically done by the electrical contractor.
3. The luxrail catalog code must be reviewed for compliance to the lighting specifications. The light output, beam spread and distribution should be verified. This portion of the review is typically done by the lighting designer.
io has a dedicated team for luxrail projects. Let us help you from design through installation.
The Specification Process
ELEvATION DRAWINGS SUBMITTAL DRAWINGS COMPLETED LUxRAIL PROJECT
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
io Lighting 1100 Busch Pkwy Buffalo Grove, IL 60089 T 847.777.3900 F 847.777.3901 E [email protected] W iolighting.com
Fountain Square ParkDesigner: Tillett Lighting DesignPhotographer: Dave Pickett
Lake Forest High SchoolDesigner: Perkins & WillPhotographer: Dave Pickett
Eden Roc HotelPhotographer: Dave Pickett
401 E. MichiganDesigner: Gary Steffy Lighting Design Photographer: Nelson Nave
Depot Landmark BuildingDesigner: Gary Steffy Lighting DesignPhotographer: Nelson Nave
Capital One Designer: Oglesby Holtman DesignPhotographer: Dan Kohnen
Mississippi River Overlook Designer: HOK Photographer: Dave Pickett
345 Park AvenueDesigner: Jaros Baum & BollesPhotographer: Dave Pickett
Lake Forest High SchoolDesigner: Perkins & WillPhotographer: Dave Pickett
The Pucci ResidencePhotographer: Dave PickettNote: Complete custom application.
io StudioPhotographer: Dave Pickett
Mississippi River Overlook Designer: HOK Photographer: Dave Pickett