led emergency drivers · type lem-p04-200-a-u-hx lem-p09-300-a-u-hx lem-p13-300-a-u-hx...

LED Emergency Drivers LED Emergency Drivers

Incorporated in the state of California in 1985, McWong Interna onal, Inc. has grown to become a strategic supplier of high‐quality ligh ng control equipment and related electrical components. For over 30 years, we have provided to our

customers an unparalleled mix of innova on,

quality, and service. Today, the pace of

technological change has quickened and

compe on con nues to intensify. We are

mee ng these challenges through heightened

investment in capable individuals, promising

technologies, and advanced manufacturing

facili es.

Visit our website www.mcwonginc.com to learn more about how McWong’s LED Emergency Drivers can benefit your company.

Product Lis ngs Micro‐Inverter— Integrated Ba ery; Pure Sinewave AC Output….…………………..4 Constant Power—Integrated Ba ery; Broad Range DC Output…………………...…..6 Constant Power – Integrated Ba ery; Op onal Bluetooth…………...….……………...8 Constant Power – Integrated Ba ery..…….……………………..…………….………………..10 Constant Power with Replaceable Ba ery Pack.….…….……………...…………………..12 Constant Current with Replaceable Ba ery Pack…….….…...……….…………...……...14 Dual‐Mode Normal + Emergency Programmable “Driverless”………………...……..16

Addi onal Resources

Limited Warranty ...………...………………………………………………….……….………………..19

Table of Contents

The Micro‐Inverter is designed for emergency opera on of LED, incandescent, and fluorescent fixtures up to 120W (~30% of rated luminaire power) using circuit design which enables shar‐ing of power. The Micro‐Inverter can also be used as a stand‐alone 36W inverter when used with ligh ng loads less than or equal to 36W. Features: Pure sinusoidal AC output Output voltage auto se ng equal to input

voltage Total dimmable power up to 120W Slim Aluminum housing Factory or field installa on Suitable for use in dry or damp loca ons

Auto Test Standard: Safety compliance to UL 924 and CAN/CSA‐

C22.2 No. 141 for 90 minute egress Compliance to CEC Title 20 FCC part 15, ICES‐005 Over voltage, over current, Inrush current

limi ng, over temperature, short circuit, open circuit protec on with auto‐reset

Opera ng temperature: 32°F/0°C to 131F/55°C

Test switch / charging indicator light Emergency reac on me ≤ 2 sec

Micro‐Inverter

— Integrated Ba ery; Pure Sinewave AC Output

4

Wiring Diagrams: LEM‐INV‐036‐U‐V1

NO

N-D

IMM

AB

LE

EM

ER

GE

NC

Y

LIG

HT

ING

SY

ST

EM

Micro‐Inverter

— Integrated Ba ery; Pure Sinewave AC Output

McWong Interna onal, Inc. 1921 Arena Blvd., Sacramento, CA 95834 Tel: 916‐371‐8080 | Email: [email protected] | Web: www.mcwonginc.com

0-10

V D

IMM

AB

LE

EM

ER

GE

NC

Y

LIG

HT

ING

SY

ST

EM

5

Type LEM-INV-036-U-V1

Lamp type For emergency operation of LED and fluorescent fixtures up to 36W

Rated voltage 120-277VAC 50/60Hz

Rated current 0.06A (Max.)

Rated power 7W

Output voltage 120-277VAC 50/60Hz

Output power Ta: 10-55℃ 36W (Max.), Ta: 0-10℃ 27W (Max.) Battery Li-ion

Charging time 24 Hours

Discharge time 90 Minutes

Charging current 0.335A (Max)

Life time of Module 5 Years

Abnormal Protection Over load, Inrush current limiting, over temperature, open circuit, short-circuit protection with auto-reset

EMC/FCC/IC standard EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3; FCC part 15, ICES-005

Safety standard EN 61347-1, EN 61347-2-7, UL924,CSA C.22.2 No. 141

Meas. mm [inch] L346 [13.62]xW82 [3.23]xH30 [1.18] Mounting center: 338 [13.31]

McWong’s broad range DC output LEM series is a UL Listed and CEC compliant constant power LED emergency driver family. This series is de‐signed for both AC LED tube/bulb and DC LED load. The driver offers best‐in‐class low profile form factor, with op ons for terminal block, flex conduit or IP66 waterproof case. Features: Constant emergency power output, wide

range of output voltage from 5 up to 300Vdc, output current auto adjusts

Ultra‐Slim aluminum housing Factory or field installa on Drivers with terminal block or conduit exit

are suitable for use in dry or damp Loca‐

ons; IP66 waterproof series is suitable for use in outdoor or wet loca ons

Auto Test Standard: Safety compliance to UL 924 for 90 minute

egress Compliance to CEC Title 20 FCC part 15, ICES‐005 Over load, Inrush current limi ng, over tem‐

perature, open circuit, short circuit protec‐on with auto‐reset



6

Constant Power

—Integrated Ba ery; Broad Range DC Output

Wiring Diagrams: LEM‐Pww‐vvv‐A‐U‐Hx

Constant Power

—Integrated Ba ery; Broad Range DC Output Type LEM-P04-200-A-U-Hx LEM-P09-300-A-U-Hx LEM-P13-300-A-U-Hx LEM-P18-300-A-U-Hx Rated voltage 120-277VAC 50/60Hz

Rated current 0.025A 0.04A 0.06A 0.08A Rated power 2.7W 3.5W 4.5W 6.0W Emergency output power 4.5W 9W 13.5W 18W Output voltage 5-200VDC 10-300VDC 15-300VDC 20-300VDC Battery Li-ion Charging time 24 Hours Discharge time >90Minutes Life time 5 years Operation temperature 0-55℃ (32°F-131°F) Abnormal protection Over load, Inrush current limiting, over temperature, open circuit, short-circuit protection with auto-reset EMC/FCC/IC standard EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3; FCC part 15, ICES-005 Safety standard EN 61347-1, EN 61347-2-7, UL924,CSA C.22.2 No. 141

LEM-Pww-vvv-A-U-HT (Terminal Block)

LEM-P04-200-A-U-HT: L200 [7.87] x W30 [1.18] x H22 [0.87] LEM-P09-300-A-U-HT: L260 [10.24] x W30 [1.18] x H22 [0.87] LEM-P13-300-A-U-HT: L345 [13.58] x W30 [1.18] x H22 [0.87] LEM-P18-300-A-U-HT: L410 [16.14] x W30 [1.18] x H22 [0.87]

LEM-Pww-vvv-A-U-HAC (Flexible Metal conduits)

LEM-P04-200-A-U-HAC: L258 [10.16] x W30 [1.18] x H22 [0.87] LEM-P09-300-A-U-HAC: L318 [12.52] x W30 [1.18] x H22 [0.87] LEM-P13-300-A-U-HAC: L403 [15.87] x W30 [1.18] x H22 [0.87] LEM-P18-300-A-U-HAC: L468 [18.43] x W30 [1.18] x H22 [0.87]

LEM-Pww-vvv-A-U-HE (IP66 Waterproof mounting)

LEM-P04-200-A-U-HE: L526 [20.71] x W56 [2.20] x H44 [1.73] LEM-P09-300-A-U-HE: L586 [23.07] x W56 [2.20] x H44 [1.73] LEM-P13-300-A-U-HE: L671 [26.42] x W56 [2.20] x H44 [1.73] LEM-P18-300-A-U-HE: L736 [28.98] x W56 [2.20] x H44 [1.73]

FO

R A

C L

ED

TU

BE

/B

UL

B/L

UM

INA

IRE

F

OR

DC

LE

D L

OA

D

7


The LEM‐P12‐060‐A‐U‐ML is a UL Listed, con‐stant power, ultra‐slim LED emergency driver designed to provide emergency backup power for LED ligh ng in indoor or damp loca on lumi‐naires. Features: Constant emergency power output, output

current auto adjusts Op onal Bluetooth Factory or field installa on Ultra‐Slim aluminum housing Suitable for use in dry or damp loca ons

Standard Features: Safety compliance to UL 924; CAN/CSA‐

C22.2 No. 141‐10 and NFPA requirements for 90 minute egress

Compliance to CEC Title 20 Over load, Inrush current limi ng, over tem‐



Test switch / charging indicator light LiFePO4 19.2V/ C1500mAh ba er pack Emergency reac on me ≤ 2 sec

8

Constant Power

—Integrated Ba ery; Op onal Bluetooth

9

Driver Model No. Input

Voltage (VAC)

Output Power

(W)

Output Current

(mA)

Output Voltage (VDC)

Battery Pack Case Dimension

LEM-P12-060-A-U-ML 120-277VAC 12 200-660 18-60V BCP-LiFePO4 -19.2-1.5-L L24.1” x W1.2” x H1.1”

Wiring Diagrams: LEM‐P12‐060‐A‐U‐ML

Co

nfi

gura

on

#3

: S

ep

arat

e E

me

rge

ncy

/ A

C L

oad

s C

on

figu

rao

n #

2:

Par

al L

oad

C

on

figu

rao

n #

1:

Sh

are

d L

oad

Constant Power

– Integrated Ba ery; Op onal Bluetooth


Constant Power—Integrated Ba ery

McWong’s Class 2 UL Listed LEM series offers CEC compliant constant power LED emergency drivers, ranging from 5W to 25W. Exit wire op‐

ons include flying leads or flex conduit. Features: Constant emergency power output, output

auto adjusts Class 2 output voltage Slim aluminum housing Factory or field installa on Suitable for use in dry or damp loca ons Auto Test

Standard: Safety compliance to UL 924 for 90 mi‐

nute egress Compliance to CEC Title 20 Compliance to Class 2 FCC part 15, ICES‐005 Over load, Inrush current limi ng, over

temperature, open circuit, short circuit protec on with auto‐reset

Opera ng temperature: 32°F/0°C to 122°F/ 50°C


10

11


Type LEM-P05-060-A-U-Px LEM-P09-060-A-U-Px LEM-P15-060-A-U-Px LEM-P25-060-A-U-Px

Rated voltage 120-277VAC 50/60Hz

Rated current 0.05A 0.06A 0.08A 0.15A

Rated power 2W 3W 4.5W 5.5W Emergency output power 5W 9W 15W 25W Output voltage 10-60VDC 11-60VDC 15-60VDC 25-60VDC Battery Ni-MH

Charging time 24 Hours Discharge time >90Minutes Charging current 0.08A 0.11A 0.19A 0.23A Life time 5 years

Operation temperature 0-50℃ (32°F-122°F)

Abnormal protection Over load, Inrush current limiting, over temperature, open circuit, short-circuit protection with auto-reset

EMC/FCC/IC standard EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3; FCC part 15, ICES-005

Safety standard EN 61347-1, EN 61347-2-7, UL924,CSA C.22.2 No. 141

LEM-Pww-060-A-U-PW (External wire, Integrated Battery)

LEM-P05-060-A-U-PW: L10.24” x W2.56” x H0.87” LEM-P09-060-A-U-PW: L12.09” x W2.56” x H0.87” LEM-P15-060-A-U-PW: L14.65” x W2.56” x H0.87” LEM-P25-060-A-U-PW: L14.09” x W3.23” x H1.18”

LEM-Pww-060-A-U-PC (Lead-wires with Flexible Metal conduits, Integrated Battery)

LEM-P05-060-A-U-PC: L10.24” x W2.56” x H0.87” LEM-P09-060-A-U-PC: L12.09” x W2.56” x H0.87” LEM-P15-060-A-U-PC: L14.65” x W2.56” x H0.87” LEM-P25-060-A-U-PC: L14.09” x W3.23” x H1.18”

Constant Power – Integrated Ba ery

Wiring Diagrams:

LE

M-P

ww

-060

-A-U

-PW

L

EM

-Pw

w-0

60-A

-U-P

C

12

Constant Power with Replaceable Ba ery Pack

McWong’s Class 2 UL Recognized LEM series offers CEC compliant constant power LED emer‐gency drivers, ranging from 5W to 25W. A single driver model can pair with different ba ery packs to provide flexibility in fixture design. Features: Constant emergency power output, output

auto adjusts Class 2 output voltage Factory installa on Field‐replaceable ba ery pack with quick

connect Slim aluminum housing Suitable for use in dry or damp loca ons Auto Test

Standard: Safety compliance to UL 924 for 90 minute

egress Compliance to CEC Title 20 Compliance to Class 2 FCC part 15, ICES‐005 Over load, Inrush current limi ng, over tem‐


Opera ng temperature: 32°F/0°C to 122°F/ 50°C


12

13

Constant Power with Replaceable Ba ery Pack

Battery Type BCP-NiMH-9.6-1.5 BCP-NiMH-10.8-2.1 BCP-NiMH-10.8-3.8 BCP-NiMH-14.4-4.5

Nominal Voltage (V) 9.6 10.8 10.8 14.4

Pack Capacity (mAh) 1500 2100 3800 4500

Output Wattage (W) 5 9 15 25

Chemistry NiMH

Charging time 24 Hours

Discharge time >90Minutes

Charging current (A) 0.08 0.11 0.19 0.23

Dimension mm[inch] L100[3.94] xW57[2.24] xH14 [0.55] Mounting

Center:115 [4.53]

L150[5.91] xW51 [2.01] xH17[0.67] Mounting

Center: 165 [6.50]

L213[8.39]xW56.4[2.22]xH18.8 [0.74] Mounting

Center: 230 [9.06]

L196[7.72]xW76.5[3.01]xH26 [1.02] Mounting

Center: 211 [8.31]

Wiring Diagrams:

L

EM

-Pw

w-0

60-A

-U-P

T


Module Type LEM-P05-060-A-U-PT LEM‐P09‐060‐A‐U‐PT LEM-P15-060-A-U-PT LEM-P25-060-A-U-PT Rated voltage 120‐277VAC 50/60Hz Rated current 0.04A 0.05A 0.07A 0.1A Rated power 2W 3W 4.5W 5.5W Emergency output power 5W@1500mAh Battery 9W@2100mAh Battery 15W@3800mAh Battery 25W@4500mAh Battery

Output voltage 10-60VDC 11-60VDC 15-60VDC 25-60VDC Operation temperature 0-50℃ (32°F-122°F)

Abnormal protection Over Load, inrush current limiting, over temperature, open circuit, short-circuit protection with auto-reset

Life time 5 years

Dimension mm[inch] L125 [4.92] x W65 [2.56] x H22 [0.87] Mounting Center: 117 [4.61]

McWong’s LEM series of UL Recognized con‐stant current LED emergency drivers are de‐signed to provide emergency backup power for 90 minutes egress. This product replaces emer‐gency fluorescent ballasts when fixtures are converted from fluorescent to LED light sources. Features: Constant emergency current output Field‐replaceable ba ery pack with quick

connect Factory installa on Powder coat steel, stainless or galvan‐

nealed case Suitable for use in dry or damp loca ons

Standard: Safety compliance to UL 924; CAN/CSA‐

C22.2 No. 141‐10 and NFPA requirements for 90 minute egress

Over load, Inrush current limi ng, over temperature, open circuit, short circuit protec on with auto‐rest



14

Constant Current with Replaceable Ba ery Pack

15


Model No. Output Power (W) Output Voltage (VAC)

Output Current

(mA) Battery Battery Pak Case

Dimension

LEM-020-056-0350-U ~20 (max @ 56Vf) 12—56 350 NiCd (2 x 9.6V, 2.5Ah packs) 17.3” x 1” x 1.1” 14” x 1.2” x 1”

LEM-018-026-0700-U 18 (max @ 26Vf) 18 – 26 700 NiCd (2 x 8.4V, 2.5Ah packs) 15.3” x 1” x 1.1” 14” x 1.2” x 1”

LEM-010-028-0350-U ~10 (max @ 28Vf) 12—28 350 NiCd (2 x 9.6V, 1.2Ah packs)

12.6” x 0.8” x 0.9” 14” x 1.2” x 1”

Constant Current Linear

Model No. Output Power (W)

Output Voltage (VAC)

Output Current

(mA) Battery Battery Pak Case Dimension

LEM-C14-036-0400-U ~14 (max @ 36Vf) 12—36 400 NiMH (7.2V, 4.0Ah pack) 5.9” x 2” x 1” 6.3” x 1.6” x 1.1”

LEM-C07-036-0200-U ~7 (max @ 36Vf) 12 – 36 200 NiMH (7.2V, 2.1Ah pack) 5.9” x 1.4” x 0.8” 6.3” x 1.6” x 1.1”

Constant Current Compact

Model No. Output Power (W) Output Voltage (VAC)

Output Current

(mA) Battery Battery Pak Case

Dimension

LEM-M20-056-0350-U ~20 (max @ 56Vf) 12—56 350 NiCd (2 x 9.6V, 2.5Ah packs) 9.5” x 2.2” x 1.1” 7.8” x 2.1” x 1.3”

LEM-M10-028-0350-U ~10 (max @ 28Vf) 12—28 350 NiCd (2 x 9.6V, 1.2Ah packs) 5.2” x 1.8” x 0.9” 7.8” x 1.8” x 1.3”

Constant Current Rectangular

*Each LED emergency driver model is assigned a default set of ba ery packs, which are automa cally included with your order. Other ba ery pack op ons are available, but must be special ordered. This product series is op mized for use with McWong’s LED modules. For ques ons regarding compa bility with light sources from other manufacturers please contact technical support.

16

Dual‐Mode Normal + Emergency Programmable “Driverless”

McWong’s LEM series of UL Recognized con‐stant current Dual‐Mode Normal + Emergency Programmable “Driverless” is a combina on of LED driver and LED Emergency Driver. Emergen‐cy mode current se ngs: 150mA, 300mA, 450mA, or 600mA; Normal mode current se ngs for the two models range from 150mA to 300mA and 600mA to 1000mA, respec vely. Features: For normal opera on and emergency opera‐

on of LEDs, no need of an extra LED driver Normal mode LED so start, emergency

mode conversion within 1 second Field‐replaceable NiCd ba ery pack with

quick connect

Slim aluminum housing 1‐10V dimmable, DALI dimmable Suitable for use in dry or damp loca ons Standard: Safety compliance to UL 924 for 90 minute

egress Over load, Inrush current limi ng, over tem‐


Opera ng temperature: 32°F/0°C to 122°F/50°C

Test switch / charging indicator light RoHS Compliant

Model No. LEM-D25-042P0600-U LEM-D42-042P1000-U

Rated voltage 120-277VAC 50/60Hz 120-277VAC 50/60Hz

Rated input current 0.3A (Max) 0.5A (Max)

Rated output power 25W (Max) 42W (Max)

Emergency output power ≤16.8W (Max @ 38V load) ≤16.8W (Max @ 42V load)

Output voltage 3～38VDC 3～42VDC

Operation frequency 320kHz≥f≥50kHz 320kHz≥f≥50kHz

Power Factor ≥0.9 ≥0.9

Battery 1.0, 2.0, 4.0Ah; 9.6V NiCd 1.0, 2.0, 4.0Ah; 9.6V NiCd

Charging time 36 Hours 36 Hours

Discharge time ＞90 Minutes ＞90 Minutes

Charging current 0.18A (Max) 0.18A (Max)

Life time 5 years 5 years

Operation temperature 0-50°C (32°F-122°F) 0-50°C (32°F-122°F)

Normal Operation Output current

150mA, 250mA, 300mA, 350mA, 400mA, 450mA, 500mA, 600mA ±3%

600mA, 700mA, 750mA, 800mA, 850mA, 900mA, 950mA, 1000mA ±3%

Abnormal protection Over load, Inrush current limiting, over temperature, open circuit, short-circuit

Protection with auto-reset

Over load, Inrush current limiting, over temperature, open circuit, short-circuit

Protection with auto-reset

Case Dimensions L6.9” x W2.6” x H0.9” L7.7” x W2.6” x H0.9”

EMC& EMF standard EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3; EN 62493

Safety standard EN 61347-1,EN 61347-2-13 ,EN 61347-2-7, UL924

Battery Pack Ni-Cd 1.0Ah 9.6V (AA): L7.7” x W1.3” x H0.6” —> Max 4W Ni-Cd 2.0Ah 9.6V (SC): L6.8” x W1.9” x H0.9” —> Max 8W Ni-Cd 4.0Ah 9.6V (D): L9.3” x W2.8” x H1.4” —> Max 17W


17


18


Wiring Diagrams: LEM‐D25‐042P0600‐U and LEM‐D42‐042P1000‐U

Dri

verl

ess

LED

Em

erg

en

cy

*Output current se ngs must be limited such that the product of the Emergency LED Array Voltage mes the Emergency Output Current does not exceed Ba ery Max Emergency Power ra ng.

Dipswitch Se ngs:

LEM‐D25‐042P0600‐U LEM‐D42‐042P1000‐U

4 5 �emergency Req’d Ba ery Typical Ra ng

0 0 150mA 1.0Ah 2W @ 12V

1.0Ah 4W @ 24V

2.0Ah 6W @ 36V

1 0 300mA 1.0Ah 4W @ 12V

2.0Ah 7W @ 24V

4.0Ah 11W @ 36V

0 1 450mA 2.0Ah 6W @ 12V

4.0Ah 11W @ 24V

4.0Ah 16W @ 36V

1 1 600mA 2.0Ah 7W @ 12V

4.0Ah 14W @ 24V

Dipswitches 4 and 5 set various emergency current values.

LEM‐Dxx‐042Pxxxx‐U Ba ery Op ons at Typical Voltages

Dipswitches 1‐3 determine the normal mode output current.


1 2 3 Current

150mA

250mA

300mA

350mA

400mA

450mA

500mA

600mA

1 2 3 Current

600mA

700mA

750mA

800mA

850mA

900mA

950mA

1000mA

19

Limited Warranty — LED Emergency Drivers

McWong Interna onal, Inc. (herea er referred to as

“MCWONG”), corporate headquarters located at 1921

Arena Blvd., Sacramento, CA 95834, warrants its

products to be free from defects in materials and

workmanship from the date of manufacture for the

following me periods:

MCWONG cannot assume any obliga ons or liabili es

for consequen al or incidental damages arising from,

or in connec on with, the use or performance of its

products or other indirect damages with respect to loss

of property, revenue or profit, or cost of removal,

installa on or reinstalla on.

This limited warranty is not applicable to any product

subjected to abnormal stress, such as improper

storage, installa on, use and/or maintenance. This

warranty is invalid for any product not installed and

operated in accordance with all relevant federal, state,

and local government regula ons, established industry

safety standards, published electrical and temperature

ra ngs, and any specific instruc ons provided by

MCWONG for the installa on of the product (s).

This limited warranty is extended by MCWONG only to

the original or first end‐user purchaser.

The standards and condi ons of any tests performed

on any MCWONG product(s) by the original purchaser,

or by any third party ac ng on behalf of the original

purchaser, shall be mutually agreed upon in wri ng

and MCWONG shall be no fied of, and may be

represented at any such tests.

Should defects occur a er installa on, and within the

warranty period, they should be specifically described

to a MCWONG representa ve. MCWONG shall correct

any defects, at MCWONG’s op on, by furnishing

materials to repair or replace any product (s) that may

prove defec ve in materials or workmanship within

the warranty period, or by extending a credit in the

amount of the purchase price. This does not apply to:

(1) damage caused by accident, abuse, mishandling, or

dropping; (2) materials which have been subject to

unauthorized repair; (3) materials not used in

accordance with instruc ons; (4) ordinary wear and

tear. MCWONG will be limited to the furnishing of new

parts, free of charge, or extending credit for in the

amount of the purchase price, in exchange for parts

proven to be defec ve and does not include any other

costs of removal or installa on.

This limited warranty cons tutes the sole and

exclusive remedy of the purchase and the exclusive

liability of MCWONG, and is in lieu of any and all other

warran es, expressed, implied, or statutory as to

merchantability, fitness for purpose sold, descrip on,

quality produc veness, or any other ma er. NO

IMPLIED STATUTORY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE SHALL APPLY BEYOND THE

AFOREMENTIONED WARRANTY PERIOD.

Warranty claims can be submi ed by calling our toll

free technical support hotline (888) 600‐9188 or by

visi ng our website www.McWonginc.com and filling

out a Warranty Replacement Form (Click on Support >>

Warranty Statements). Completed forms should be

faxed to (916) 371‐6666 or emailed to

[email protected].

Product Series Warranty

LED Emergency Drivers (all types) 60 months

McWong Interna onal, Inc. 1921 Arena Blvd., Sacramento, CA 95834 Tel: 916‐371‐8080 Fax: 916‐371‐6666 Email: [email protected] Web: www.mcwonginc.com

Copyright© 2020 McWong Interna onal, Inc. Specifica ons subject to change without no ce V5.01

led emergency drivers · type lem-p04-200-a-u-hx lem-p09-300-a-u-hx lem-p13-300-a-u-hx...

Documents