7/27/2019 Lecture Schedule Steel Structures

1/2

1 - Mod 1 - Lec 1 - Introduction to Design of Steel Structures (1:01:12)

2 - Mod 2 - Lec 1 - Connections (1:02:40)

3 - Mod 2 - Lec 2 - Riveted Connections (59:28)

4 - Mod 2 - Lec 3 - Design of Rivet Joint (1:04:55)

5 - Mod 2 - Lec 4 - Welding (1:01:16)

6 - Mod 2 - Lec 5 - Design of Fillet and Butt Welds (59:44)

7 - Mod 2 - Lec 6 - Bolted Connection (1:00:13)

8 - Mod 3 - Lec 1 - Eccentric Connections: Rivet Joints (59:02)

9 - Mod 3 - Lec 2 - Design of Eccentric Connection With Load Lying in Plane of

Joint (Rivet & Bolt) (59:41)

10 - Mod 3 - Lec 3 - Eccentric Connection With Load Perpendicular to Plane of

Riveted Joint (56:05)

11 - Mod 3 - Lec 4 - Analysis and Design of Join with Seat Connection (58:55)

12 - Mod 3 - Lec 5 - Eccentric Connection (1:00:02)

13 - Mod 3 - Lec 6 - Load Lying Perpendicular to the Plane of Weld Joint: Fillet

and Butt weld (59:53)

14 - Mod 4 - Lec 1 - Tension Member (57:37)

15 - Mod 4 - Lec 2 - Design of Tension Member (1:02:00)

16 - Mod 4 - Lec 3 - Design of Tension Member: Gusset Plates. Lug Angles and

Tension Splices (1:06:30)

17 - Mod 4 - Lec 4 - Design of Tension Member: Subjected to Axial and

Bending (1:00:09)

18 - Mod 5 - Lec 1 - Compression Member (56:16)

19 - Mod 5 - Lec 2 - Design of Compression Member (1:01:55)

20 - Mod 5 - Lec 3 - Design of Eccentrically Loaded tension Member (58:47)

21 - Mod 5 - Lec 4 - Built up Compression Member (1:00:19)

22 - Mod 5 - Lec 5 - Design of Built up Compression Member (59:57)

23 - Mod 5 - Lec 6 - Lacing for Built Up Compression Member (1:00:52)

7/27/2019 Lecture Schedule Steel Structures

2/2

24 - Mod 5 - Lec 7 - Design of Lacing System (58:02)

25 - Mod 5 - Lec 8 - Design of Batten Plates (1:01:22)

26 - Mod 6 - Lec 1 - Introduction to Flexural Members: Beams (1:00:14)

27 - Mod 6 - Lec 2 - Design Procedure of Beam Members (1:01:18)

28 - Mod 6 - Lec 3 - Design of Laterally Supported Beams (1:00:31)

29 - Mod 6 - Lec 4 - Design of Laterally Unsupported Beams (1:00:47)

30 - Mod 6 - Lec 5 - Built-Up Beams (1:00:43)

31 - Mod 6 - Lec 6 - Built-Up Beams: Curtailment of the Flange Plates and

Shear Connections (1:00:51)

32 - Mod 6 - Lec 7 - Design of a Built-Up Beams (57:23)

33 - Mod 6 - Lec 8 - Design of Shear Connections and Purlins (1:00:43)

34 - Mod 7 - Lec 1 - Gantry Girders (1:00:50)

35 - Mod 7 - Lec 2 - Design of Gantry Girders (1:00:52)

36 - Mod 7 - Lec 3 - Introduction to Plate Girders - Part 1 (1:00:39)

37 - Mod 7 - Lec 4 - Introduction to Plate Girders - Part 2 (1:00:33)

38 - Mod 7 - Lec 5 - Design of a Plate Girder (1:00:52)

39 - Mod 8 - Lec 1 - Column Base Part - 1 (1:02:19)

40 - Mod 8 - Lec 2 - Column Base Part - 2 (1:04:55)