lecture no 101 me course 3370 lecture 10 material removal or machining dr. ramon e. goforth adjunct...
TRANSCRIPT
![Page 1: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/1.jpg)
Lecture No 10 1
ME Course 3370Lecture 10
Material Removal or Machining
Dr. Ramon E. GoforthAdjunct Professor of Mechanical
EngineeringSouthern Methodist University
![Page 2: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/2.jpg)
Lecture No 10 2Overview slide for Shaping and Forming Metals
Ass
embl
y
Ingotcasting
MoltenMaterial
Powders
CastingShapes
RollingForging/
Press forming
Stamping
Pressing
Sheet metalforming
ContinuousCasting/Rolling
InjectionMolding
Mac
hini
ng
Fin
ishi
ng
Raw
Mat
eria
l
Special
Extruding
Single crystalpulling
Firing/Sintering
SLS
Increasing level of detail
Blowmolding
![Page 3: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/3.jpg)
Lecture No 10 3
Outline of Lecture• Basic information on material removal• Factors involved in material removal• Independent variables• Dependent variables• Machining Processes• Machining Economics• Machines
Lecture 10
Lecture 11
Lecture 12
![Page 4: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/4.jpg)
Lecture No 10 4Categories of Material Removal/Machining Processes
![Page 5: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/5.jpg)
Lecture No 10 5Why is Material Removal Important
• Significant proportion of all goods involve machined surfaces
• $70 - 100 billion industry• The only way to achieve high precision• The only way to create sharp corners, flat
surfaces and internal and external profiles
![Page 6: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/6.jpg)
Lecture No 10 6Why is Material Removal Important
• The only way to shape hardened or brittle material
• Economics (for small part volumes (e.g. prototypes)
• Can achieve special surface finishes• Indispensable for creating complex shapes
with good dimensional accuracy and surface finish
![Page 7: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/7.jpg)
Lecture No 10 7
Limitations of Material Removal
• Generate lots of scrap (high buy to fly ratio)• Takes longer to remove material than to form
it• Can mess up the properties and surface
finish if not done properly
![Page 8: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/8.jpg)
Lecture No 10 8
Useful Web Sites on Machining
• The Machine Tool Agile Manufacturing Research Institute– Software tools for
• Fixture design• Machining force analysis• Part distortion
• Institute for Advanced Manufacturing Sciences– Software for
• Feed and speed selection• Process planning
• University of Minnesota– Active models of cutting
![Page 9: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/9.jpg)
Lecture No 10 9Stationary Part- Milling, Drilling, Sawing, Etc
![Page 10: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/10.jpg)
Lecture No 10 10
Rotating Part - Turning
![Page 11: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/11.jpg)
Lecture No 10 11
Basic Processes
Kalpakjian p 595/535
Milling, drilling, etc
Turning
• Cutting process the same in both
![Page 12: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/12.jpg)
Lecture No 10 12
Material Removal as a System
Raw Material
Finished part
Drawings, CAD model, Tolerances, Surface finish, Machine code
Cutting fluid Operator
Machine Tool
Workpiece Tool
Cutting tool
Cutting fluid
![Page 13: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/13.jpg)
Lecture No 10 13Factors Affecting Machining/Cutting Processes
• Workpiece – Material, condition, temperature, (Machina
bility)– Temperature rise
![Page 14: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/14.jpg)
Lecture No 10 14Factors Affecting Machining/Cutting Processes
• Tool (The cutting edge)– Material, condition
/sharpness, coatings, shape, surface finish– Cutting parameters (How much material remov
ed)• feed, speed, depth of cut
– Tool angles– Type of chip created– Tool wear– Temperature rise
![Page 15: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/15.jpg)
Lecture No 10 15Factors Affecting Machining/Cutting Processes
• Presence or absence of cutting fluid (How process is cooled and lubricated)
• Machine tool parameters (To achieve tolerances)– Machine design
• Force and power availability• Stiffness, damping, backlash)
– Fixture design (How the workpiece is held while shaped)
• Also dependent on other variables
• Some are independent and some are dependent variables
![Page 16: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/16.jpg)
Lecture No 10 16
Independent variables in cutting
• Workpiece material - "machinability"• Cutting tools• Cutting parameters• Presence or absence of fluid• Characteristics of the machine tool• Fixture design
![Page 17: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/17.jpg)
Lecture No 10 17
Dependent Variables
• Material removal rate• Surface finish of the workpiece• Force and energy dissipated• Type of chip produced• Temperature rise in workpiece, tool and the
chip• Wear and failure of the tool
![Page 18: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/18.jpg)
Lecture No 10 18
Independent variables in cutting• Workpiece material - "machinability"
![Page 19: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/19.jpg)
Lecture No 10 19
Machinability• Machinability depends on the strength,
toughness and hardness of the workpiece material– Machinability can be improved by the
addition of certain elements– Lead and sulfur added to steels gives free
machining steels
Link is to the ASM Materials data base which includes an Machinability index
![Page 20: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/20.jpg)
Lecture No 10 20
Machinability
• Good Machinability indicates– Good surface finish and part integrity
• no tearing– Long tool life– Low power and force requirements– Good chips
• No long thin chips
![Page 21: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/21.jpg)
Lecture No 10 21
Machinability of MaterialsSteels Leaded Easy (lead acts as lubricant) Sulfurized Relatively easy Rephosphorized Relatively easy Calcium de-oxidized Relatively easyStainless Steels Austenitic General difficult: Ferritic SS Easy Martensic AbrasiveAluminum Easy to machine but softer
alloys give poor surface finish
![Page 22: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/22.jpg)
Lecture No 10 22
Machinability of Materials
Magnesium Easy: danger from fireGrey Cast Iron Machinable but abrasiveWrought Copper Difficult to machine because
of ductilityBrass Easy to machineCobalt based Alloys Difficult and abrasive:
required low feeds and speeds
Nickel-based Alloys Difficult and abrasiveTitanium Difficult because of poor
thermal conductivity
![Page 23: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/23.jpg)
Lecture No 10 23
Independent variables in cutting
• Workpiece material - "machinability"• Cutting tools
![Page 24: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/24.jpg)
Lecture No 10 24
Tool Selection and Design• Tool selection is a very complex process
involving many parameters:– Workpiece Machinability– Type of cut - continuous, interrupted– Tool material type– Process parameters
• Feed• Speed• Depth of cut
– Shape– Cost
• Tool life critical to economics (A dependent variable, see later)
![Page 25: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/25.jpg)
Lecture No 10 25
Tool Selection Guides
• See page 637/571 for general properties of tool materials
• See page 644/578 of Kalpakjian for guide to selecting Tungsten Carbide tools
• A couple of on-line catalogues– http://www.indexable.com/product.html– http://www.sct-usa.com/index.html
![Page 26: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/26.jpg)
Lecture No 10 26
Tool Design Parameters
• Material Properties– Hardness– Toughness to resist impact forces– Wear Resistance – Chemical Stability– Coating material
![Page 27: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/27.jpg)
Lecture No 10 27Properties of various cutting tool materials
Kalpakjian p 660/582
![Page 28: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/28.jpg)
Lecture No 10 28Hardness Vs Temperature for Cutting Tool Material
![Page 29: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/29.jpg)
Lecture No 10 29Impact of tool material on cutting time
Kalpakjian Page 646/579
![Page 30: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/30.jpg)
Lecture No 10 30
Tool Design Parameters• Shape
– Edge strength• Circles are stronger than triangles
– Edge design• Sharp vs rounded
![Page 31: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/31.jpg)
Lecture No 10 31
Tool Design Parameters• Shape
– Influence on workpiece surface finish
![Page 32: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/32.jpg)
Lecture No 10 32
Cutting Tool Material CostsMaterial Cost
($)• Carbon and medium alloy steels• High-speed steels 1-7• Cast-cobalt alloys• Carbides 2-5• Coated tools• Alumina Based Ceramics 5-8• Cubic Boron Nitride 60-80• Silicon Nitride-base ceramics• Diamond 75-100• Whisker-reinforced materials
– See page 637/571 for properties
![Page 33: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/33.jpg)
Lecture No 10 33
Tool Designs • Solid vs inserts
![Page 34: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/34.jpg)
Lecture No 10 34
Independent variables in cutting
• Workpiece material - "machinability"• Cutting tools• Cutting parameters
![Page 35: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/35.jpg)
Lecture No 10 35
Cutting Process Parameters
• Depend on the process (turning, milling, drilling, etc.)
• Determines tool life for a specific tool material and design
• Will discuss later when discussing individual processes
![Page 36: Lecture No 101 ME Course 3370 Lecture 10 Material Removal or Machining Dr. Ramon E. Goforth Adjunct Professor of Mechanical Engineering Southern Methodist](https://reader030.vdocuments.us/reader030/viewer/2022032707/56649e245503460f94b127de/html5/thumbnails/36.jpg)
Lecture No 10 36
Summary• Machining is
– a cost effective way of making low volume parts
– The only way of making certain shapes– Involves shear fracture– uses the same basic cutting process for all
processes• The independent variables include
– material machinability, cutting tools, cutting parameters, presence or absence of fluid, the machine tool, fixture design
• The dependent variables include– Material removal rate, surface finish of the workpiece, cutting
force, energy dissipated, type of chip produced, temperature rise in workpiece, tool and the chip, wear and failure of the tool