lecture 2 wind energy course
DESCRIPTION
This presentation contains, i. Basics of Control Systems, ii. Wind Turbine Controls iii. Basics about Wind Farm and Control iv. Wind Turbine Gearbox v. Wind Turbine Generator vi. GridsTRANSCRIPT
![Page 1: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/1.jpg)
Lecture 5
Wind Energy Systems ITE – 1883
Lecture Delivered ByUmair N. Mughal
![Page 2: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/2.jpg)
2
What do these two have in common?
• Tornado • Boeing 777
January 11, 2005
• Highly nonlinear, complicated dynamics!• Both are capable of transporting goods and people over long distances
BUT• One is controlled, and the other is not.• Control is “the hidden technology that you meet every day”• It heavily relies on the notion of “feedback”
![Page 3: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/3.jpg)
Basic Concepts
• System– A collection of components which are coordinated together to perform a function.
• Dynamic System– A system with a memory.– For example, the input value at time t will influence the output at future instant.
• A system interact with their environment through a controlled boundary.
![Page 4: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/4.jpg)
Basic Concepts
• The interaction is defined in terms of variables.i. System inputii. System outputiii. Environmental disturbances
![Page 5: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/5.jpg)
System Variables
• The system’s boundary depends upon the defined objective function of the system.
• The system’s function is expressed in terms of measured output variables.
• The system’s operation is manipulated through control input variables.
• The system’s operation is also affected in an uncontrolled manner through disturbance input variables.
![Page 6: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/6.jpg)
Block Diagram• Component or process to be controlled can be represented by a block diagram.• The input-output relationship represents the cause and effect of the process.
• Control systems can be classified into two categories:
i. Open-loop control system
ii. Closed-loop feedback control system
Process Output
Input
![Page 7: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/7.jpg)
Control System
• Control is the process of causing a system variable to conform to some desired value.
• Manual control Automatic control (involving machines only).• A control system is an interconnection of components forming a system
configuration that will provide a desired system response.
Control System
Output
Signal
Input Signa
l
Energy
Source
![Page 8: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/8.jpg)
Manual Vs Automatic Control• Control is a process of causing a system variable such as temperature or position to
conform to some desired value or trajectory, called reference value or trajectory.• For example, driving a car implies controlling the vehicle to follow the desired path to
arrive safely at a planned destination.i. If you are driving the car yourself, you are performing manual control of the car.
ii. If you use design a machine, or use a computer to do it, then you have built an automatic control system.
![Page 9: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/9.jpg)
Control System Classification• An open-loop control system utilizes an actuating device to control the process directly without
using feedback.
• A closed-loop feedback control system uses a measurement of the output and feedback of the output signal to compare it with the desired output or reference.
Actuating Device Process Output
Desired Output
Response
Desired Output
Response
Measurement
Output
Controller
ProcessComparison
Single Input Single Output (SISO) System
![Page 10: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/10.jpg)
Control System Components
i.System, plant or process– To be controlled
ii.Actuators– Converts the control signal to a power signal
iii.Sensors– Provides measurement of the system output
iv.Reference input– Represents the desired output
![Page 11: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/11.jpg)
General Control System
Sensor
Actuator ProcessController ++
Set-point or
Reference input
Actual Outpu
t
ErrorControlled Signal
Disturbance
Manipulated
Variable
Feedback Signal
+
-
++
1. Measure system response, including effects of disturbances, using (noisy) sensors2. Compare actual system response to desired system response at each time “Error” signal(s) = (Desired response)-(Actual response)3. Use “error” signals to drive compensator (controller) so as to generate real-time control corrections so as to keep
“errors” small for all time.
![Page 12: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/12.jpg)
Logical Signal
Industrial Control Example - Level 0 and 1
Controller Actuators
Sensors OutputVariables
InputParameters(Level 2)
Process
Inputs
Error
Feedback Signal
![Page 13: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/13.jpg)
13
Managerial Control Model
If
InadequateIf Adequate
Adjust StandardsAdjust Performance
Feedback
Establish Strategic Goals.
1. Establish standards of performance.
2. Measure actual performance.
3. Compare performance to standards.
4. Take corrective action.
4. Do nothing or provide reinforcement.
![Page 14: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/14.jpg)
Blood Sugar Control
![Page 15: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/15.jpg)
15
Negative Feedback:.
Stimulus triggers response to counteract further change in the same direction. Negative-feedback mechanisms prevent small changes from becoming too large.
![Page 16: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/16.jpg)
Human Closed Loop System brain
spinal cord
muscles
joints
movementsee
skintouch
muscle sensors(length and force)
sensory feedback
reflex!another layer ofsensory feedback
![Page 17: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/17.jpg)
17
Human Closed Loop System (Box Diagram)
Brain Spinal cord Muscles Joints Movement
Controller Actuator(muscles)
Joints++_
DesiredMovement
Central Nervous System
Central Nervous System
![Page 18: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/18.jpg)
Cruise Control Block Diagram
18
Magnet and Coil Sensor
set point, SP
(desired speed)
Gas Pedal ControlElement
disturbances
(hills, wind, etc.)measured “click rate”PV signal
controller errore(t) = (SP – PV)
manipulated gas flow rateto car engine car speed
controller output, COsignal to gas pedal
+-+-Car Speed
ProcessCruise
Controller
Copyright © 2007 by Control Station, Inc. All Rights Reserved
![Page 19: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/19.jpg)
MIMO Control System
DISTURBANCES
DYNAMIC SYSTEM (PLANT)
CONTROLLER (COMPENSATOR)
COMMANDS CONTROLS OUTPUTS
![Page 20: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/20.jpg)
Transient response: Gradual change of output from initial to the desired conditionSteady-state response: Approximation to the desired response
Settling time
Overshoot
Controlledvariable
Time
Reference
%
Steady StateTransient State
Steady state error
Response Characteristics
![Page 21: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/21.jpg)
Performance SpecsStability
UnstableStable
![Page 22: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/22.jpg)
Wind Turbine Design is an Interdisciplinary Problem
Aerodynamics
Structures,Structural Dynamics,Vibrations, Stability,
Fatigue Life
Control systems forRPM, Pitch, Yaw
Transmission, gears, tower,
power systems, etc.
Cost
Noise,aesthetics
![Page 23: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/23.jpg)
Control System Design Process1. Establish control goals
2. Identify the variables to control
3. Write the specifications for the variables
4. Establish the system configuration and identify the actuator
5. Obtain a model of the process, the actuator and the sensor
6. Describe a controller and select key parameters to be adjusted
7. Optimize the parameters and analyze the performance
If the performance meet the specifications, then finalize design
If the performance does not meet specifications, then iterate the configuration and actuator
![Page 24: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/24.jpg)
WIND ENERGY CONVERSION SYSTEMS
•Power is transferred from the wind to the rotor then passed through the gearbox, generator, and power electronics until it finally reaches the gird.
•Each stage of the power transfer has a certain efficiency. Therefore, each power transfer stage presents an opportunity to reduce the cost of energy from a wind turbine.
![Page 25: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/25.jpg)
![Page 26: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/26.jpg)
KidWind Project | www.kidwind.org
![Page 27: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/27.jpg)
![Page 28: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/28.jpg)
![Page 29: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/29.jpg)
Control Objectives
• Speed control– Maintain rated rotor speed in above rated winds
• Load control– Oscillations occur in the Low Speed Shaft (LSS)– Reduce loads in LSS
![Page 30: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/30.jpg)
Power Capture
Pow
er
[kW
]Wind Speed v [m/s]
Pwind
v3Ideal turbine
(max. 60% efficient)
Prated
vcut-invcut-outvrated
Source: Dr. Karl Stol, UoA
Torque Control
Pitch Control
Reg
ion
1
Reg
ion
2
Reg
ion
3
Region 1: Turbine is stopped
Region 2: Maintain constant tip speed ratio to
produce maximum power below rated wind speed.
Region 3: Maintain rated rotor speed and power.
Maintain Rotor Speed Keep the best tip speed ratios in Region 2 Not exceed rated velocity in Region 3 Have smooth power output
Reducing DYNAMIC loading on the turbine.
Blade flap Tower fore-aft vibration Drive train torsional vibration
![Page 31: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/31.jpg)
Modern Control Objectives for the Wind Turbine
31
![Page 32: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/32.jpg)
Individual Blade Pitching
With modern control (MIMO) we can control the load on each blade individually
This now allows mitigation of ASSYMETRIC loading:Wind shearTower shadowInertial loadsTurbulence across the swept area
32
![Page 33: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/33.jpg)
Common Power Control Methods• Pitch control - blade pitch and blade angle of attack is decreased with wind speed greater than rated speed. - Wind speed and power output and power out put are continuous monitored by sensors - Need sophisticated control mechanism
• Stall control - blades are designed in such a that with increase in wind speed, the angle of attack increases. - Pressure variation at the tp and bottom surface changes causing flow separation and vortex shedding - kills lift forces and leads to blades stalling - Need very sophisticated blade aerodynamic design
• Active stall-Controlled power regulation - The blades are pitched to to attain its best performance. - As the wind speed exceeds the rated velocity, the blades are turned in the opposite direction to increase the angle
of attack and forces the blade to stall region.
• Yaw Control - The rotor is partly pushed away from the wind direction at higher wind speeds. - The rotor spin axis is pushed to an angle to the incoming wind direction
![Page 34: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/34.jpg)
Control of powerReducing the power at high windspeed
• Reducing the lift and over speeding called Pitch variable speed
• Reducing the lift by generating stall
Flow on upper and lower surface equal no lift
Wind attack point
Wind attack point
At high wind the power is reduced by pitching the blades. This can be done in two ways.
![Page 35: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/35.jpg)
Control of Power PitchingLow wind High wind Stop
Pitch variable speed and optislip
Active stall
Passive stall
![Page 36: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/36.jpg)
Control of powerIso-power map wind speed and pitch angle
― Pitch control
0 kW
500 kW
1000 kW
1500 kW
2000 kW
2500 kW
Win
d s
pe
ed m
/s
5
25
15
10
20
-10 0 +10 +20 +30
Pitch angle (deg)-20
72 m rotor 2MW turbine
― Stall control
This diagram show how much the turbine is able to produce depending on the pitch angles and wind speed. Other blades and dimensions will have different diagrams but the principles will be the same. The red and green lines show the pitch angle for a pitch regulated and a stall regulated turbine. Up to rated power the pitch angle is identical for the two different systems. From this diagram you can see it is possible to limit the maximum power to 2 MW on a stall turbine just by setting the pitch angle to -4° without adjusting. To reach the same by pitching it is needed to pitch from 0 to +25° this means the demands to the pitch system is high in order to avoid power peaks when the wind is increasing. If the wind is increasing from 17 to 19 m/s and the pitch is not adjusted the power is increased from 2 to 3 MW which means 50 % overload.
![Page 37: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/37.jpg)
The Betz Power
![Page 38: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/38.jpg)
Wind Turbine Control
![Page 39: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/39.jpg)
Wind Turbine Control
(more detail)
![Page 40: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/40.jpg)
![Page 41: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/41.jpg)
Control systems Fixed speed
Get
rieb
e 1:
50
Parkingbrake
Rotorbearing
Bypasscontactor
Soft startequipment
WTGcontrol
Asynchronous generator
6 ... 33 kV, f = 50 Hz/6 ... 34,5 kV, f = 60 Hz
Step-uptransformer
HVswitchgear
ABB drawing
Passive Stall
Gearbox
Generatorswitchgear
ACf = constantn = costant
![Page 42: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/42.jpg)
Control systems Fixed speed
Get
rieb
e 1:
50
Parkingbrake
Rotorbearing
Bypasscontactor
Soft startequipment
WTGcontrol
Asynchronous generator
Step-uptransformer
HVswitchgear
ABB drawing
Active Stall, Pitch Control
Gearbox
Generatorswitchgear
ACf = constantn = costant
Pitchdrive
6 ... 33 kV, f = 50 Hz/6 ... 34,5 kV, f = 60 Hz
![Page 43: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/43.jpg)
Control systems Semi-variable speed
ABB drawing
Variable slip, pitch control
Get
rieb
e 1:
50
Parkingbrake
Rotorbearing
Bypasscontactor
Soft startequipment
WTGcontrol
Asynchronous generator
Step-uptransformer
HVswitchgear
Gearbox
Generatorswitchgear
ACf = constantn = semi-variable
Pitchdrive
RCCunit
RCCcontrol
HEAT
6 ... 33 kV, f = 50 Hz/6 ... 34,5 kV, f = 60 Hz
![Page 44: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/44.jpg)
Control systemVariable speed
ABB drawing
Variable speed control DFIG (doubly fed induction generator)
Get
rieb
e 1:
50
Parkingbrake
Rotorbearing
WTGcontrol
Doubly-fedasynchronous
generator Step-uptransformer
HVswitchgear
Gearbox
Generatorswitchgear
ACf = constantn = variable
Pitchdrive
Generatorside
converter
Gridside
converter
Converter control
6 ... 33 kV, f = 50 Hz/6 ... 34,5 kV, f = 60 Hz
![Page 45: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/45.jpg)
Control system Variable speed
ABB drawing
Variable speed control with full scale converter
Get
rieb
e 1:
50
Parkingbrake
Rotorbearing
WTGcontrol
Step-uptransformer
HVswitchgear
Gearbox
Generatorswitchgear
ACf = variablen = variable
Pitchdrive
Converter control
6 ... 33 kV, f = 50 Hz/6 ... 34,5 kV, f = 60 Hz
Asynchronous or synchrounous generator
Converter
![Page 46: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/46.jpg)
Gearbox
A gear box is commonly used for stepping up the speed of the generator, although designs may also use direct drive of an annular generator. Some models operate at constant speed, but more energy can be collected by variable-speed turbines which use a solid-state power converter to interface to the transmission system. All turbines are equipped with protective features to avoid damage at high wind speeds, by feathering the blades into the wind which ceases their rotation, supplemented by brakes.
Gear Transmission
- Speed of a typical rotor may be 30 rpm to 50 rpm.
- Generator speed may be around 1000 rpm to 1500 rpm.
- Need gear trains in the transmission line to manipulate the speed
- May need multiple stages to achieve the speed ratio.
- Connects the low speed shaft of the rotor to the high sped shaft of the generator.
Additional Requirements,Heat dissipation, power losses and cooling, Compact design, Weight, Bearing system
Lower speed shaft
Higher Speed shaft
Low Speed Gear
High Speed Gear
![Page 47: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/47.jpg)
Gearing designs
47
Spur (external contact)
Spur (internal contact)
Helical PlanetaryWorm
“parallel shaft”
Parallel (spur) gears can achieve gear ratios of 1:5.
Planetary gears can achieve gear ratios of 1:12.
Wind turbines almost always require 2-3 stages.
![Page 48: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/48.jpg)
Gearing designs
48
Source: E. Hau, “Wind turbines: fundamentals, technologies, application, economics, 2nd edition, Springer 2006.
Tradeoffs between size, mass, and relative cost.
![Page 49: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/49.jpg)
Type of generator
Synchronous
Asynchronous
Common in fossil fuel powerplants, but rare in wind turbines. Rotation speed is synchronized with the grid frequency
If the rotor were to rotate at the same frequency as the electric field in the stator, no electricity would be producedWhen the rotor of the generator rotates faster than the stator, a strong current is induced in the rotorThe harder one cranks on the rotor, the more power that is transferred as electromagnetic force to the stator, converted to electricity, and fed to the gridThe difference in the rotation speed between no power and peak power is about 1%, but this slip reduces stress on the rotor and smoothes out power variations
![Page 50: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/50.jpg)
Type of generatorFixed speed
asynchronous generator
50 Hz
60 x frequencynumber of pole pairsrpm =
Rotational speed6-poled stator
rpm1000
+ kW (generator)
- kW(motor)
![Page 51: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/51.jpg)
Type of generator Variable speed asynchronous generators
50 Hz
AC
DC AC
DC
Stator field = 1000 rpm
Rotor mechanically = 1100 rpm
![Page 52: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/52.jpg)
Electric Generators
generator
full power
PlantFeeders
actodc
dctoac
generator
partia l power
PlantFeeders
actodc
dctoac
generator
Slip poweras heat loss
PlantFeeders
PF controlcapacitor s
actodc
generator
PlantFeeders
PF controlcapacitor s
Type 1 (Asynchronous)Conventional Induction Generator (fixed speed)
Type 2Wound-rotor Induction
Generator w/variable rotor resistance
Type 3 (Synchronous)Doubly-Fed Induction
Generator (variable speed)
Type 4 (Asynchronous)Full-converter interface
52
![Page 53: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/53.jpg)
Type 3 Doubly Fed Induction Generator (Synchronous)
generator
partia l power
PlantFeeders
actodc
dctoac
•Most common technology today
• Provides variable speed via rotor freq control
• Converter rating only 1/3 of full power rating
• Eliminates wind gust-induced power spikes
• More efficient over wide wind speed
• Provides voltage control
53
![Page 54: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/54.jpg)
Conventional Induction Generator (fixed speed)
• Direct connected.• Simplest.• Requires switch to prevent motoring.• Draws reactive power with no reactive control.
![Page 55: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/55.jpg)
Wind Generator Topologies
• Doubly-fed.• The doubly-fed topology is the most common for high power.• Rotor control allows for speed control of around 25% of synchronous.• Rotor converter rating is only around 25% of total generator rating.• Reactive power control.
![Page 56: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/56.jpg)
Wind Generator Topologies
• Full-rated converter connected.• Lower cost generator than DFIG. Lower maintenance.• Converter must be full-rated.• Full-rated converter allows for complete speed and reactive power control.• Could also be used with a synchronous generator.
![Page 57: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/57.jpg)
Generator Design Considerations
Other Factors:• Weight• Starting overcurrent• Dynamic response behavior• Speed range
![Page 58: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/58.jpg)
Connection to the grid
![Page 59: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/59.jpg)
Connection to grid Direct
Grid frequency AC
PCC
Grid frequency AC
![Page 60: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/60.jpg)
Connection to gridIndirect
Variable frequency AC
(e.g. from synchronous generator)DC
Irregular switched AC Grid frequency AC
Rectifier Inverter PCC
![Page 61: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/61.jpg)
Control System Architecture of Wind Farm
Wind turbine
SensorsPositions, speeds, accelerations, stresses, strains, temperature, electrical & fluid characteristics, etc.
SensorsPositions, speeds, accelerations, stresses, strains, temperature, electrical & fluid characteristics, etc.
SupervisorChoice of operating condition:• Start up• Power production• Emergency shut-down …
SupervisorChoice of operating condition:• Start up• Power production• Emergency shut-down …
Active control systemControl strategy
Active control systemControl strategy
ObserversWind, tower & bladesObserversWind, tower & blades
Wind farm supervisorWind farm supervisor
Communication and reporting Communication and reporting
ActuatorsActuator control system
ActuatorsActuator control system
![Page 62: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/62.jpg)
Supervisory Control SystemSupervisory Control System
Main tasks:• Operational managing and monitoring • Diagnostics, safety• Communication, reporting and data logging• …
Operational states:• Idling• Start Up • Normal power production• Normal shut down• Emergency shut down
Main input data:• Wind speed• Rotor speed• Blade pitch• Electrical power• Temperatures in critical area• Accelerations• …
but also• Stresses, strains (blades, tower)• Position, speed (yaw, blade, actuators, teetering angle, rotor tilt, …)• Fluid properties and levels• Electrical systems (voltages, grid characteristics, …)• Icing conditions, humidity, lighting, …
![Page 63: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/63.jpg)
Supervisory Control SystemSupervisory Control System
IdlingIdling Power production
Power productionStart upStart up
Normal shut downNormal shut down
Emergency shut down
Emergency shut down
V > V cut-inV > V cut-in RPM > Wcut-in
RPM > Wcut-in
V > V cut-offV > V cut-off
V < V cut-inV < V cut-in
• Failures• Overspeed & high rotor accel.
• Vibrations
• Failures• Overspeed & high rotor accel.
• Vibrations
Representative operational state monitoring logic:
![Page 64: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/64.jpg)
Capacity Factor
• This is the mean (average) power output of the turbine divided by the peak (or rated) power output
• The mean power output is computed as the power output in the centre of each wind speed interval, times the probability of that interval, summed over all intervals and divided by the total probability (which is 1.0)
![Page 65: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/65.jpg)
Variable Speed Generators
• Becoming more common• Rotation rate of rotor varies with wind speed from 8 rpm to 16 rpm• Results in less stress on the structure and more uniform variation in
power output• Requires more complex electronics and gearbox to always produce
electricity at the fixed grid frequency
![Page 66: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/66.jpg)
Wind Energy in Cold Regions• Wind is a widely accepted source of clean energy.
• Arctic regions has good resources of wind energy.
• Atmospheric ice accretion on wind turbine blades in arctic is a major hindrance in proper use of wind energy.
• Icing is mainly caused by the impingement of super cooled water droplets.
• Average annual power production losses of wind turbines due to atmospheric ice accretion are estimated to be about 20%.
![Page 67: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/67.jpg)
Effects of Atmospheric Icing
• Main effects of atmospheric ice accretion on wind turbine are:
– Disrupted blade aerodynamics.– Increased fatigue due to mass imbalance.– Human’s harm due to ice shedding.– Instrumental measurement errors.– Loss of power production.– Complete stop of power production.
• Active anti icing and de-icing systems are installed on wind turbines to minimize these effects.– This complicates the design and increase the cost.
![Page 68: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/68.jpg)
Plot shows the calculated power curve for a pitch controlled wind turbine with different ice accretions; [1].
![Page 69: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/69.jpg)
Research Need
• Keeping in view the potential of wind resources in cold regions, it is important:
– To understand the physics of atmospheric ice accretion on large wind turbine blades.
– To analyze the effect of various operating and blade geometric parameters on rate and shape of ice growth.
– To estimate the resulting performance losses.
– To purpose actions to minimize performance losses.
![Page 70: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/70.jpg)
Atmospheric Icing: Physics
• Atmospheric icing on wind turbines mainly occurs due to collision of super cooled water droplets with the exposed surface.
• Mainly three types of atmospheric icing occurs:
– Light rime ice– Hard rime ice– Glaze ice
• The type of ice formed on a surface, heavily depends upon the surface thermal balance.
![Page 71: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/71.jpg)
71
Type of atmospheric ice
71
In-Cloud Icing
Rime
Hard Rime Soft Rime
Glaze
Precipitation Icing
Wet Snow Freezing Rain
Frost
![Page 72: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/72.jpg)
Heat flux balance for iced surface; [2].
,freezing adiabatic kinetic sub evap Conduction Convective RadiationQ Q Q Q Q Q Q
Q = Heat Flux
![Page 73: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/73.jpg)
Wind Turbines : Atmospheric Icing• Atmospheric ice accretion on wind turbines mainly depends
upon following variables:
1. Point of operation (Location, Altitude etc).2. Geometry of wind turbine blade.3. Relative wind velocity.4. Atmospheric temperature. 5. Droplet diameter.6. Liquid water content.
• Field measurements and numerical modeling techniques were used to understand the atmospheric ice growth on large wind turbines
![Page 74: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/74.jpg)
Ice Monitoring: Field Measurements• Field measurements were taken at Nygårdsfjell wind park (2.3 MW, pitch
controlled Siemens wind turbines), mainly focusing on ice monitoring and its resultant effects on power production.
• Field measurements were taken using HoloOptics icing sensors, anemometers, web cameras, data acquisition system and an onsite weather station.
• Power losses were calculated for wind speed > 5 m/s, and temp > +2 C (summer) and < 0.5 C (winter).
• Due to instrumental problems , the average production losses at Nygårdsfjell was recorded 0.5 % due to ice.
![Page 75: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/75.jpg)
Anemometer, icing sensor, Web Camera installed on Siemens SWT-2.3 MW wind turbine at Nygårdsfjell.
![Page 76: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/76.jpg)
• Data from three different wind park sites (Nygårdsfjell , Sveg & Aapua) in Sweden and Norway was compared to estimate the average annual performance losses due to ice accretion.
Average Production Losses: Comparison
SiteWind Turbine Power loss
(summer)Power loss
(winter)
Nygårdsfjell Siemens SWT-2.3 MW
0.3 % 0.5 %
Sveg Vestas V90 - 2MW
- 5%
Aapua Vestas V82 – 1.5 MW
6.6 % 28 %
![Page 77: Lecture 2 Wind Energy Course](https://reader038.vdocuments.us/reader038/viewer/2022103000/556411b4d8b42a130c8b52f9/html5/thumbnails/77.jpg)