leading edge safetyleadingedgesafety.net/wp-content/uploads/2020/02/leading... · 2020-06-30 ·...

Leading EdgeSAFETY

LEADING EDGE SAFETY

INTRODUCTIONMessage from THE PRESIDENT 4

MOBILE FALL PROTECTION 5

SafetyBull™ 7 TRIREX™ 9 R2000™ 11 STINGER™ 13MOBILE FALL PROTECTION: Add-Ons 12

TEMPORARY FALL PROTECTION 13

COMMERCIAL/LOW SLOPE RaptorRail™ Railing System 17 All-In-One Railing System 19 RB-02 Contractor Base Kit 22 RB-04 Contractor Base Kit 22 Ballasted Guardrail 23

SkyNet™ Skylight Protection 27 RESIDENTIAL/STEEP SLOPE

SafetyGator™ 25 SS Rail™ 26

ROOFING EQUIPMENT 28 IRONMANHydraulicTearoff 29 AB-02 Two Part Adhesive Applicator 31 I.C.E. Cart 33 LES Flat Material Cart 34 GrabSafe™ Portable Ladder Extension 35

PERMANENT FALL PROTECTION 37

USM Guardrail 39Wall Mount Guardrail 41Standing Seam Guardrail 43Permanent Warning Lines 45 Ballasted Guardrail 46Roof Hatch Guardrail 47Deck Mount Guardrail 49Ladder-to-Roof Access Point 51Skylight Guardrail 52Skylight Screens 53Integrated Lightning Protection 54 Collapsible Guardrail 55

CUSTOM DESIGN SERVICES 56 DISTRIBUTION 57 ABOUT US 58

BORN TO SAVE& PROTECTGrowing up in the sheet metal industry, I always knew I wanted to work in the field. I started an apprenticeship in 1995 and worked hard to learn as much as I could. As an apprentice, I worked in the field as an installer, in the shop as a fabricator and later as an estimator, superintendent and project manager. These skills would prove indispensable. As a project manager, I witnessed an event that would forever change the course of my career and life’s work. On a hot summer day, we took a short afternoon break. A worker was far too close to the leading edge and fell off of the side of the building. Although he survived his injuries, he faced permanent damage which left him unable to work and provide for his family. This really changed my team’s approach to safety on the jobsite. We decided that all workers need to be tied off, 100% of the time.

The “safety first” approach created unique challenges. No two roofs are the same–many roofs do not have tie off anchors and lifelines can create additional safety hazards. My team and I started brainstorming and the mobile anchor point concept was formed.

From a simple sketch, we designed, manufactured and rigorously tested and engineered the original mobile fall protection cart. Granted in 2006, The Raptor Trirex utilizes technology we developed in the first United States Patent issued for a mobile fall protection anchor. 12 years later, the TriRex is the most recognized product in the roofing safety industry, not only for looks, but for its flawless safety record. The TriRex has never been recalled, has never failed and has saved countless lives.

My team and I have worked hard to build a brand that sets the bar for safety compliance. Leading Edge Safety was born out of necessity, but today we are fueled by a passion for safety–because no worker should have to choose between safety and livelihood.

At Leading Edge Safety, safety compliance comes standard. We take the first step, so you don't take your last.

President, Leading Edge Safety

The Original

RAPTOR Mobile Fall Protection Cart

TriRex™

Designed for three workers on fall arrest and two on fall restraint, The TriRex™ protects up to 5 workers.

pg. 9

Stinger™

Small and compact, the Stinger™ fits where the TriRex™ doe sn’t. Protects up to 2 workers. pg. 13

R2000™

Lighter than the TriRex™, the R2000™ protects up to 4 workers.

pg. 11

MOBILE FALL PROTECTION

Award-Winning. Life Saving.The ORIGINAL mobile fall protection series from Leading Edge Safety.

Meticulously engineered and tested, our mobile fall protection carts have been proven to save lives.

Safety Bull

Our lightest fall protection cart, The Safety Bull™ protects up to 2 workers. pg. 7

P: 888.990.2990 F: 816.472.0822© Leading Edge Safety 2019. All Rights Reserved.

[email protected]

Having an anchorage point on wheels has been arevolution in fall protection. We know that the industry has long sought a more compact fall protection solution, and thus we are extremely proud to introduce the Safety Bull. Smaller than the original TriRex™ and lighter than the Stinger™ the Safety Bull is our most versitile mobile fall protection unit. When the Safety Bull is on the roof, two workers can attach to the anchorage point, put tools on the cart, and tie off for mobile fall protection. If a fall from the roof occurs, a powerful engagement arm will be mechanically propelled into the building’s structure.

THE LIGHTEST MOBILE FALL PROTECTION CART

Small and light for ultimate portability.

Locking Engagement Arm

FALL ARREST Tie Off Points

Fork PocketsFlat-Free Tires

Positive locking front brake & front axle lock (shown without handle attached)

Hoisting Rings

SAFETY BULL™MOBILE FALL PROTECTION

LEADING EDGE SAFETY 8

MOBILE FALL PROTECTION PERMANENT FALL PROTECTIONTEMPORARY FALL PROTECTION ROOFING EQUIPMENT CUSTOM SERVICES ABOUT USINTRO

Dimensions

Length 63.75” without handle 99" with handle

Width 30.25”

Height 21” 45.5" with material rack

Tires Solid Polyurethane 16” x 6.5” x 8” flat-free tires

Weight

Weight 600 LBS

Optional Weights for one man on concrete

315 LBS [ 11 weights ]

Capacity

Fall Arrest Capacity 2 workers [ 310 LBS EA ]

Compliance

• OSHA 1926.502 [D] Fall Arrest Anchor

• ANSI/ASSE Z359.6• EN 795:2012 A and E• CE Certification

Key Features

• Compact size

• Added safety features include positive locking brakes & engagement arm lock

• 2 workers on fall arrest

• Push down handle gives positive breaking

• Made in the USA: manufactured to be the best quality in the industry

• Compliant with OSHA 1926.502[D] & ANSI/ASSE Z359.6

Shown with optional material rack, job box and side rails


[email protected]

The TriRex™ is the most comprehensive mobile fall protection cart on the market. The only fall arrest cart with a patented locking engagement arm that ensures your anchor point is locked in its deepest point of penetration. The TriRex™ mobile anchor cart allows for mobile and versatile fall protection for three-person fall arrest and two-person fall restraint. The streamlined design incorporates a three-point front axle locking mechanism and is the only fall arrest cart with a locking engagement arm. This ensures the anchor point is locked into its deepest point of penetration during a fall. Keep your workers safe and mobile with the TriRex™.

THE ORIGINAL MOBILE FALL PROTECTION CART

Don’t be fooled by an imposter.

Large job box comes standardLocking Engagement Arm

FALL ARREST Tie Off Points

FALL RESTRAINT Tie Off Points

Fork PocketsFlat-Free Tires

Disc brake with locking pin & front

axle lock

Hoisting Rings

Add-Ons available; shown with optional loaded I.C.E. station

ICE-PE-000-12

TRIREX™MOBILE FALL PROTECTION



Key Features



• 2 workers on fall restraint

• Advanced standard options inclue fork pockets, flat free tires and 4 corner d-rings for hoisting & securing during transport

• US Patent Number: 8,240,431 B2



TR-000-01-18-ASM Single Job Box

TR-000-02-18-ASM Double Job Box [Small & Standard]

TR-000-03-18-ASM Double Job Box [Standard]

Dimensions

Length 78” without handle attached 110" with handle attached

78” without handle attached 110" with handle attached


Width 48” 48” 48”

Height 53” 53” 53”

Tires Solid Polyurethane 18” x 8.5” x 8” flat free tires

Solid Polyurethane 18” x 8.5” x 8” flat free tires


Platform Size 78” x 47” 78” x 47” 78” x 47”

Platform Height 24” 24” 24”

Ground Clearance 5 -1/2” 5 -1/2” 5 -1/2”

Weight

Total Weight 1000 LBS 1077 LBS 1130 LBS

Weight Carry Capacity 2000 LBS [ Gross Weight Rating ] 2000 LBS [ Gross Weight Rating ] 2000 LBS [ Gross Weight Rating ]

Fall Arrest Capacity 3 workers [ 310 LBS EA ] 3 workers [ 310 LBS EA ] 3 workers [ 310 LBS EA ]Fall Restraint Capacity 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ]

Job BoxDimensions Standard Job Box - Single Small Job Box & Standard Job Box Standard Job Box - Double

47.5”w x 24”h x 30”d 24"w x 24"h x 30"d & 47.5"w x 24"h x 30"d 47.5”w x 24”h x 30”d

Capacity 20 cubic feet 10 cubic feet & 20 cubic feet 20 cubic feet each

Materials 16 Guage solid steel construction; powder coated

16 Guage solid steel construction; powder coated


Weight 125 LBS 77 LBS & 125 LBS 125 LBS each

Compliance

OSHA 1926.502 [D] Fall Arrest Anchor, ANSI/ASSE Z359.6




[email protected]

R-2000-01-18-ASM Single Job Box

R-2000-02-18-ASM Double Job Box [Small & Standard]

R-2000-03-18 ASM Double Job Box [Standard]

Dimensions

Length 78” without handle attached110" with handle attached


78” without handle attached110" with handle attached

Width 48” 48” 48”

Height 53” 53” 53”




Platform Size 78” x 47” 78” x 47” 78” x 47”

Platform Height 24” 24” 24”

Ground Clearance 5 -1/2” 5 -1/2” 5 -1/2”

Weight

Total Weight 763 LBS 840 LBS 893 LBS

Weight Carry Capacity 2000 LBS [ Gross Weight Rating ] 2000 LBS [ Gross Weight Rating ] 2000 LBS [ Gross Weight Rating ]

Fall Arrest Capacity 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ]Fall Restraint Capacity 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ] 2 workers [ 310 LBS EA ]

Job BoxDimensions Standard Job Box - Single Small Job Box & Standard Job Box Standard Job Box - Double

47.5”w x 24”h x 30”d 24"w x 24"h x 30"d & 47.5"w x 24"h x 30"d 47.5”w x 24”h x 30”d

Capacity 20 cubic feet 10 cubic feet & 20 cubic feet 20 cubic feet each

Materials 16 Guage solid steel construction; powder coated



Weight 125 LBS 77 LBS & 125 LBS 125 LBS each

Compliance




Key Features



• 2 workers on fall restraint

• Advanced standard options include fork pockets, flat free tires and 4 corner d-rings for hoisting & securing during transport




R2000™MOBILE FALL PROTECTION



OSHA regulation 29 CFR 1926.502(d)(20) states that the employer shall provide for promt rescue of employees in the event of a fall or shall assure that employees are able to rescue themselves. Do you have a rescue plan in place? Our RaptorRescue™ systems assure you can provide a safe and easy rescue in a timely manner.

Raptor Rescue Retrieval System & Pole Attachment

Featuring a 5 to 1 gear reduction ratio, this system easily attaches to the mobile fall protection cart. ITEM #RMS-000-16-ASM

Easily attaches to the TriRex™ to aid worker rescue. Compatible with the TriRex™, R2000™ & Stinger™. ITEM #RPCC-12

Raptor Alert™ Warning System

Fall warning system includes a 130 decible siren and white strobe light. Compatible with the TriRex™, R2000 & Stinger™.

ITEM #RAS-000-18

SLR TRAY Line Positioning

For upright positioning of SRL’s off the roof surface to eliminate membrane damage and keep SRL’s safe. Compatible with the TriRex™ and R2000™. ITEMS #SRL-000-13 ITEMS # SRL-000-13CM

Narrow SRL Tray

Job Box

Available in small & standard sizes to customize your R2000™ or TriRex™

ITEMS #JB-04-000-11 [ large ] ITEMS #JB-05-000-11 [ small ]

Vinyl Cover

Available in small & large sizes to protect your R2000™ or TriRex™ or Stinger™ ITEMS #TR-VC-000-13 [ Large - TriRex™ and R2000™ ]

ITEMS #SMC-VC-000-13 [ Small - Stinger™ ]

ADD-ONSMOBILE FALL PROTECTION

I.C.E. Platform

Everything you need In Case of Emergency is quick, easy and visible in a centralized location when first aid care is needed. The platform is available unstocked or fuly loaded. Compatible with the TriRex™, R2000™. ITEMS # ICE-P-000-12

Platform OnlyITEMS # ICE-PE-000-12-ASM

Fully stocked


[email protected]

STINGER™MOBILE FALL PROTECTION

The Stinger™ allows for 1 person fall arrest and 1 person fall restraint. It fits where larger fall protection carts do not: the compact design allows for transport in the back of a pickup and can fit through doorways, elevators and roof hatches. The counterweights remove easily to reduce weight while moving. When you need versatile mobile fall protection, the Stinger™ will meet your needs.

Easily Remove Weights For Greater Portability

Removeable handle

Locking engagement lock arm

Fall Arrest & Restraint Tie-Off Points

Removable Weights Flat-Free Tires

SMALL & COMPACT MOBILE FALL PROTECTION CART



STINGER™ SMC-00-18

Dimensions

Length 51” without handle 114" with handle

Width 39”

Height 21.25”


Weight

Frame Weight 126 LBS with engagement box 89 LBS without engagement box

Weights 50 LBS [ 12 per unit ]

Working Weight 743 LBS

CapacityFall Arrest Capacity 1 worker [ 310 LBS EA ]Fall Restraint Capacity 1 worker [ 310 LBS EA ]

Compliance


STINGER™

Key Features

• Added safety features include ratcheting engagement arm lock and flat free tires

• 1 worker on fall arrest

• 1 worker on fall restraint

• Fits in the bed of a truck, through doorways, in elevators and through roof hatches

• Counterweights remove easily to reduce weight during transport




TEMPORARY Fall Protection

Temporary Fall Protection TEMPORARY

Fall Protection

RaptorRail™ Temporary Guardrail

The swiveling base allows finish work to the edge without removing the safety of the system. pg. 17

All-In-One Temporary Guardrail

This versatile system can be installed on flat/low edges, over gravel stops, clamped on parapet walls, and concrete slab overhangs.

pg. 19

RB-02 | RB-04 Temporary Guardrail With two size kits, the contractor base system is adaptable to your needs.

pg. 22

Ballasted Temporary Guardrail

Weighted bases prevent tipping and allow configuration to adapt to almost any situation.

pg. 23

SKYNET Temporary Skylight Protection Roofs aren’t the only place fall protection is needed. Don’t forget skylights and unfinished openings!

pg. 27

Our temporary guardrail systems can be installed quickly and easily and are adaptable to virtually any situation. Tricky architecture is no match for our versitle product offering.

Reusable. Economical. Live Saving.

Temporary guardrail to meet your ever changing construction needs.


[email protected]

RAPTORRAIL™TEMPORARY FALL PROTECTION

The RaptorRailTM is designed and built to keep your workers safe while enhancing their productivity. RaptorRail™ can be installed quickly and easily, yet is adaptable to virtually any situation. The crate and optional cart systems allow the components to be hoisted to the desired location in a single lift and be accessible at any location. The swiveling base allows finish work to the edge without removing the safety of the system. The base post and the parapet clamps have rubber pads to protect the building facade.

Adaptable to virtually any situation.

POST & BASE ASSEMBLY Post & Base Unit–The post has drop lock pin connectors for attaching railing sections. The base swivels up and out of the way for edge detail finishing. ITEM: #RB-P-000

Drop lock pin connectors

Swivel base

PARAPET CLAMP– Allows the RaptorRail™ system to attach to a parapet wall with no attaching screws or fasteners. ITEM: RB01-RC-CF-000

Parapet clamp

TEMPORARY FALL PROTECTION PERMANENT FALL PROTECTIONMOBILE FALL PROTECTION ROOFING EQUIPMENT CUSTOM SERVICES ABOUT USINTRO


350’ Roofing Base Kit Crate Cart Parapet Clamp System

#RR-CS-350 #RCR-001 #RCCS-36

DimensionsLength 125” 116” 55”Width 50” 52” 36”Height 42” 33.5” 33.5”Included Items

36 posts Flat Free Tires 36 parapet clamps56 10’ rails Hoisting hooks 36 quick attach/release pins4 universal corners 1 clamp crate

2 XL adjustable rails – 120”-218”

4 large adjustable rails – 70”-120”

4 medium adjustable rails – 43”-70”2 small adjustable rails – 29”-43”2 mid support posts1 rail system crate

Weight 2200 LBS 200 LBS 855 LBS

Key Features

• ' Upright' or 'Stanchion' base designed for low edge or parapet applications

• Adjustable rail height, corners and adjustable rails to fit the most demanding situations

• ' Upright' or 'Stanchion' base swivels out of the way for finishing to the edge without removing the system

• Quick attach/release rails for easy setup and removal

• Optional parapet clamps adjust to fit para-pets up to 24”

• Designed to fit over gravel stops

• RB-01 Base adjusts for roof slopes 2:12, 4:12, 6:12 and 9:12

• Compliance comes standard: OSHA 1926.502[b]

STANDARD 8’ & 10’ FIXED LENGTH RAILS

These 8’ and 10’ rails are the standard rails used in the RaptorRail™ system. ITEM: RB-RAIL-08 ITEM: RB-RAIL-10

ADJUSTABLE LENGTH RAILS

These adjustable length rails give the RaptorRail™ system the flexiblity to handle unique roofing situations. ITEM: RB-ARAIL-43

small 29”–43”ITEM: RB-ARAIL-70

medium 43”–70”ITEM: RB-ARAIL-120

large 70”–120”ITEM: RB-ARAIL-218

x-large 120”–218”


[email protected]

ALL-IN-ONETEMPORARY FALL PROTECTION

ADAPTABLE & FAST TEMORARY FALL PROTECTION

The All-In-One™ railing kit is the last system you will ever need to buy. You can install it on flat/low edges, over gravel stops, on parapet walls, and even on concrete slab overhangs. The post can accept either RaptorRail™ metal rails or can be ordered with lumber rail options. The railing brackets can be adjusted vertically and rotated around the post, so setting up corners and unusual geometries is simple. The All-In-One can be used to keep you safe on various applications, including low edge with a gravel stop, parapet walls up to 24” and slab overhangs. When you’re all done, the base and parapet clamp store in one convenient piece.

Versatility to get the job done.



Key Features

• 3 bases in 1 great system: Low Edge, Parapet & Slab Overhang Clamp

• Rail height is fully adjustable

• Compatible with both steel RaptorRail™ and wood railing with optional bracket


• Each upright weighs only 25 LBS


PARAPET INSTALLATION

LOW EDGE INSTALLATION

SLAB–OVERHANG INSTALLATION


[email protected]

SPEC DATA ALL-IN-ONE 20 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 20 BASE, 8 FOOT RAIL KITIncluded Items RR-ALL-IN-1-20-10 #RR-ALL-IN-ONE-20-08

32 10’ 32 8’

4 medium adjustable [ 43”-70” ] 4 medium adjustable [ 43”-70” ]

8 adjustable corner [ 28”- 42” ] 8 adjustable corner [ 28”- 42” ]

4 long adjustable [ 70’ - 120” ] 4 long adjustable [ 70’ - 120” ]

4 small adjustable [ 29” - 43” ] 4 small adjustable [ 29” - 43” ]

1 railing crate 1 railing crate

SPEC DATA ALL-IN-ONE 40 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 40 BASE, 8 FOOT RAIL KIT

Included Items RR-ALL-IN-1-40-10 RR-ALL-IN-1-40-08

72 10’ 72 8’






SPEC DATA ALL-IN-ONE 50 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 50 BASE, 8 FOOT RAIL KITIncluded Items RR-ALL-IN-1-50-10 RR-ALL-IN-1-50-08

92 10’ 92 8’






CHALLENGE ACCEPTED.ALL-IN-ONE CONFIGURATIONS TO MEET YOUR NEEDS



SPEC DATA ALL-IN-ONE 20 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 20 BASE, 8 FOOT RAIL KITIncluded Items RR-ALL-IN-1-20-10 #RR-ALL-IN-ONE-20-08

32 10’ 32 8’






SPEC DATA ALL-IN-ONE 40 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 40 BASE, 8 FOOT RAIL KIT

Included Items RR-ALL-IN-1-40-10 RR-ALL-IN-1-40-08

72 10’ 72 8’






SPEC DATA ALL-IN-ONE 50 BASE, 10 FOOT RAIL KIT ALL-IN-ONE 50 BASE, 8 FOOT RAIL KITIncluded Items RR-ALL-IN-1-50-10 RR-ALL-IN-1-50-08

92 10’ 92 8’






RB-02|RB-04TEMPORARY FALL PROTECTION

GO BEYOND THE ROOFwith the contractor base system.Roofs aren’t the only place fall protection is needed. Whether it’s at the loading dock or during highway bridge work, our systems keep you safe and compliant. With three size kits, this adjustable system is adaptable to fit your project.

The Contractor Base Systems are quick to install and easy to adjust. Designed to be flexible and adaptable, the rail system includes adjustable length rails and corners. Settings on each base adjust the rail height.

Spec Data RB-02 RB-04#RB-02 #RB-02

Dimensions

Length 124” 124”

Width 21” 21”

Height 25” 25”

Included Items

12 contractor #2 bases 12 contractor #2 bases

12 quick attach/release pins 12 quick attach/release pins12 post 12 post

18 ten foot rails 18 ten foot rails

2 universal corners 2 universal corners2 x-large adjustable rails [ 120” x 218” ] 2 x-large adjustable rails [ 120” x 218” ]1 rail system crate 1 rail system crate

Key FeaturesRails and post are interchangeable with RaptorRail™ posts and rails Includes toe board attachment

Ideal for bridge and road construction Stronger than wood guardrails

Weight 585 LBS 585 LBS

Key Features

• Fast & easy setup

• Reusable

• Enables work right to the leading edge

• Compliance comes standard OSHA 1926.502 [b]

RB-02 RB-04


[email protected]

BALLASTED GUARDRAIL

TEMPORARY FALL PROTECTION

The ballasted guardrail is a fast, easy and economical way to erect temporary and permanent guardrail systems to keep workers safe while increasing their productivity. Weighted bases prevent tipping and allow configuration to adapt to almost any situation. Ballasted guardrail can be used at perimeters, open curbs, skylights, stair openings and anywhere else a leading edge requires fall protecton.

VERSATILEFALL PROTECTION

Applicable for temporary or permanent applications.

DROP LOCK PINS FOR TEMPORARY INSTALLATION

HEX KEY BOLTS FOR PERMANENT INSTALLATION



Key Features

• Heavy weighted bases prevent tipping

• Lifts and d-rings

• Stackable



Item #WBC-000-18 Weighted Base Crate (included items ) Description

#WBC-000-CRATE Storage Crate#WBP-DL 12 Bases with posts#RB-RAIL-10 22 10' Rails#RB-UC-000 4 adjustable corners

Ballasted Guardrail:

#WBPR-ADJ-120-DL-ASM Droplock Rail Attachment Points







#WBP-DL-ASM Droplock Rail Attachment Points

#WB-AC Corner Adjustable Hinge Corner

#RP-UC-000 Universal Corner

#RB-07-TB-048-16 4' Toe Board



The Ballasted Guardrail Storage System features a crate that is ideal for transporting and storage of our Ballasted Guardrail. Convenient fork lift pockets and d-rings for hoisting make this crate ideal for job sites or for storage in the warehouse during the winter months. With multiple compartments, every item needed for the Ballasted Guardrail system has a convenient place for accessibility. Not only is everything handy during setup, returning inventory becomes a lot easier–saving time & money. Weighted bases stack three at a time while guardrail sections have dedicated storage pockets. Don’t forget about those snap-lock pins! Each snap-lock pen has it’s own slot location.

The ballasted crate storage system is available for individual purchase to compliment your existing system or as a new setup.

BALLASTED CRATEStorage System


[email protected]

SAFETY GATOR


The SafetyGator™ offers you protection from the number one cause of death and serious injury at residential sites–falls from heights from six feet or more. The SafetyGator™ is the simplest solution for compliance and maximum safety.

STEEP SLOPETEMORARY FALL PROTECTION

Protection during roof work.

Key Features

• No need for counterweights–fills with water

• No assembly required

• Tie-offs for up to 6 workers at 310 LBS ea


Dimensions

Size 64”L x 30”W x 39”H (without handle)

Weight 410 LBS (dry)

1490 LBS (operational)

MaterialsTires solid polyurethane 18" x 8.5" x 8"Tank Capacity 145 gallonsBrake System self-locking pinsLid Opening 13 3/4" x 13 3/4'Tie Offs 6 man fall restraint at 310 LBS/person



Key Features

• No need for counterweights–fills with water

• No assembly required

• Tie-offs for up to 6 workers at 310 LBS ea


STEEP SLOPE GUARDRAIL


The SS-Rail™ is designed to be user friendly, yet completely adjustable to the daily challenges of steep slope roofing. Installation is quick and easy with lightweight posts and slotted keyway for fastening.

Designed to accept the steel railing or standard lumber, the SS-Rail™ system offers economical options so you can provide the safest jobsite possible.

Key Features

• Fully adjustable pitch from 0/12 to 12/12

• Fully adjustable rail height

• Accepts steel railing 8' to 10' spacing and adjustable rails up to 120"

• Lightweight at 16LBS

• Key slotted bases for easy removal


PROTECTION FORSLOPED ROOF WORK.

Item

#RB-SS-000-12 SS-Rail™ & Post assembly fully adjustable rail height

#RB-RAIL-10 RaptorRail™ 10' horizontal rail sold in pairs

#RB-RAIL-08 RaptorRail™ 8 horizontal rail sold in pairs

#RB-RAIL-120 RaptorRail™ Adjustable 70"-120" sold in pairs


[email protected]

SKYNET™TEMPORARY FALL PROTECTION

The SKYNET™ is an easy-to-use, reusable, cost-effective solution for skylight fall protection. It’s user friendliness is attributed to it’s simple yet highly effective design. Simply lay a SKYNET™ over a curbed skylight or secured over an opening in the roof surface and you’re protected from falling through to the level below.

In just a few minutes, skylights are easily protected. The result? Unparalleled peace of mind. In the event that you fall into a skylight or opening in the roof surface, this safety product will catch you, preventing any serious injuries.

The SKYNET™ is also availiable in a foldable model, perfect for transporting to and from multiple jobsites.

Key Features

• Compliance, simplified–ease of use increases worker compliance

• Cost effectve–the SkyNet can be used over and over & quickly pays for itself

• Foldable option for portability and ease of use

• Custom sizes available

• Compliance comes standard: OSHA 1926.502[i]

PEACE OF MIND.SKYNET PROTECTION

Item

SN-MB-000 Secure Attach Bracket

SN-6-6-C 6' x 6' Collapsible SkyNet

SN-6-6 6' x 6' SkyNet

SN-6-12 6' x 12' Collapsible SkyNet

SN-6-12 6' x 12' SkyNet

Roofing Equipment

IRONMAN™ Hydraulic Tearoff Machine

The IRONMAN™ Hydraulic Tearoff Machine, featuring 100% hydraulic operation–no belts chains or linkages.

pg. 29

AB-O2 Two Part Self Adhesive Applicator

The self-cleaning AB-O2 eliminates the need for continuous product flow when not in use–which prevents clogging during downtime.

pg. 31

I.C.E. CART First Aid Station Everything you need in one centralized location.

pg. 33

Flat Material Cart

A convenient mobile option for jobsite materials. Featuring wide fork pockets and lifting hooks for your heavy duty jobsite needs.pg. 34

GrabSafe™ Portable Ladder Extension

Making the transition from ladder to roof safer while staying in compliance.

pg. 35

Reusable. Economical. Simple.Engineered to the highest standards and rigorously field tested.

Our exclusive line of roofing equipment is designed to provide easy to use equipment to help you get the job done right. Designed and tested by experts in the field, our products are easy to use and cost effective.


[email protected]

IRONMANROOFING EQUIPMENT

HYDRAULIC TEAROFF MACHINE

Packed with features: The IRONMAN™ hydraulic tearoff machine contains a heavy-duty independent hydrostatic drive with 100% hydraulic operation. Featuring a custom hydraulic drive system, no belts, chains, and universal parts, the IRONMAN™ keeps it simple so you can focus on getting the roof torn-off. Powered by Honda: THE NEXT GENERATION OF GX ENGINE The GX390, is one of the best engines in the business. With more power, quieter performance, lower fuel consumption, lower emissions, and better features, exceptional performance comes standard.

Pure power, unleashed.

EQUIPMENT

MOBILE FALL PROTECTION CUSTOM SERVICES ABOUT USINTRO


TEMPORARY FALL PROTECTION ROOFING EQUIPMENTPERMANENT FALL PROTECTION

The Hydra-TrakTM: This unique and innovative hydraulic drive system transfers power from one side to the other with grip for positive two wheel drive. The Hydra-TrakTM will automatically disengage when the need for increased traction diminishes. In combination with non-directional flat-free rubber tires, this ensures ease of use for the operator.

FM SERIES HYDRA-TRAK™Traction System

Hoisting Ring

Directional control lever

Blade Actuator Control Knob

Key Features Dimensions

• The only tearoff to feature 100% hydraulic operation

Size 39.5”H (to handle grips) x 84”L x 29.75”W (18”W at blade)

• FM Series Hydra-Trak™ Automatic Traction Control and non-directional flat free rubber tires

Engine

Transmission

Honda GX390, 13HP

State of the art hydraulic system

• Universal parts Starter Electric start

Traction Hydra-Trak automatic two wheel drive traction system

Tires Custom designed 16” x 5” non-directionalsolid rubber flat free tires

Weight

655 LBS

Freewheel Control Lever

Electric start


[email protected]

AB-O2

ROOFING EQUIPMENT

SELF CLEANING TWO-PART ADHESIVE APPLICATOR

The AB-O2, an innovative self-cleaning adhesive applicator eliminates clogging on the jobsite. When the hand valve is in the off position, compressed air quickly purges remaining product from the tip and manifold–eliminating the need to constantly change tips every time the system is paused. With decreased consumables, reduced downtime and increased productivity, the AB02 is the right choice for your crew.

Self-Cleaning to Eliminate Clogs




SELF CLEANING TWO-PART ADHESIVE APPLICATOR

Quick connect to air line for self-cleaning function

Attachments for resin lines

Off position lays flat for ease of temporary storage

Self-cleaning feature reduces amount of tips used on a job site*.

*Tips sold separately.


• Quick connect to air line allows for self-cleaning all the way through the tip

• Air purse allows conservation of resin

• Reduces downtime & consumables A JIC 6F to 1/4 NPTM SWIVEL

B JIC 5F to 1/4 NPTM SWIVEL

Handle 32.625”L x 5.25”D x 1”H

Materials

Body 6061 Aluminum Anodized Type II Class IHandle 16 GA Steel x 1” round


[email protected]

The I.C.E. Station comes fully equipped with everything you need to meet your safety and first aid requirements. Everything you need is quick, easy and visible in a centralized location when first aid care is needed. Our stocked units come with standard safety and first aid items, but can be customized to fit your specific needs.

Everything you need in a centralized location.

Item

ICE-CE-000-12 [ Fully Stocked ] ICE-CE-000-12 [ Cart Only ]


• Can be customized to fit your needs Length 42”

• Quick, easy and visible at a centralized location

Width 27”

• Can be purchased as a stand alone unit (pictured above) or can be configured as an add-on item to fit your exsisting mobile fall cart.

Height 24”

Tires solid polyurethane 4.8” x 4” x 8”;flat-free tires

Weight

167 LBS

I.C.E. CARTROOFING EQUIPMENT

FIRST AID STATION

Item

MC-000-48-15


• D-Rings for hoisting Length 72”

• Multiple units can form a train Width 48”

• Flat-free tires Height 24”

• Wide 48” frame Tires solid polyurethane 4.8” x 4” x 8”; flat-free tires, easy rolling bearings

• Fork pockets Weight Capacity 2,000 LBS

• Largest "bed" on the market

Weight

167 LBS

I n Case ofEmergency

Everything you need, centralized




ROOFING EQUIPMENT

FLAT MATERIAL CART

Item

ICE-CE-000-12 [ Fully Stocked ] ICE-CE-000-12 [ Cart Only ]


• Can be customized to fit your needs Length 42”

• Quick, easy and visible at a centralized location

Width 27”

• Can be purchased as a stand alone unit (pictured above) or can be configured as an add-on item to fit your exsisting mobile fall cart.

Height 24”

Tires solid polyurethane 4.8” x 4” x 8”;flat-free tires

Weight

167 LBS

Item

MC-000-48-15


• D-Rings for hoisting Length 72”

• Multiple units can form a train Width 48”

• Flat-free tires Height 24”

• Wide 48” frame Tires solid polyurethane 4.8” x 4” x 8”; flat-free tires, easy rolling bearings

• Fork pockets Weight Capacity 2,000 LBS

• Largest "bed" on the market

Weight

167 LBS

The LES Flat Material Cart is a durable, heavy-duty, convenient mobile option for your jobsite materials. With a rear hitch and front pin hitch a train can be formed. Large D-Rings and fork pockets make hoisting, tying down and moving a breeze. The flat material cart features the largest standard platform in the industry.

HEAVY-DUTY for a seamless workflow.


[email protected]

GrabSafe Portable™ROOFING EQUIPMENT

LADDER EXTENSION

The transfer from the ladder to the roof is the one of the most dangerous tasks when climbing onto a roof. There was no good way to step off a ladder and onto a roof and back, until now. The GrabSafe™ eliminates the common safety issues such as stepping around the ladder during roof transfers. Our easy-to-install GrabSafe Portable™ ladder attachment is an easy way to make any ladder-to-rooftop transition safer. Extended handles help you get leverage as you transition from the ladder to a flat surface while maintaining a constant three points of control with walk through access.

Taking you to greater heights.





• Rubber pads to prevent sliding Length LRE-000-B 4.5”L x 12”W x 51.25”H

• Provides required 3’ above roof edge LRE-000W-13 2.5”L x 4.125”W x 51.5”H

• Wide opening for easy access Installation Attaches to fit on ladder rails 1.5” x 3.75”

• Compatible with most extension ladders

Weight

12 LBS

3 POINTS

OF CONTROL

WIDE WALKTHROUGH WIDTH

PERMANENT Fall Protection

“Zero Penetration” attachment under standard perimeter edge details allows full access to the entire roof surface, wall flashings and sheet metal. The USM Guardrail system can be installed prior to roof construction and even left in place during complete roof replacement.

pg. 39

USM Guardrail Full perimeter fall protection without penetrating the roof membrane.

Wallmount Guardrail

The dual plate mounting system allows roof flashing to be installed over the base plate and creates a compression seal around mounting studs when the upright plate is attached.

pg. 41

Full perimeter fall protection for with a dual plate mounting system.

Standing Seam Guardrail

Attaches to the structural metal panels with pre-engineered S-5™ clamps ensuring solid and maintenance free installation without penetrating the roof panels.

pg. 43

Full perimeter fall protection for standard roofing and sheet metal details.

Roof Hatch Guardrail

Strategically designed by experts with comprehensive experience in the fall protection industry to ensure compliance, safety and ease of use.

pg. 47

Roof Hatch protection featuring a built in landing area, self closing gate and GrabSafe™ handholds.

Ladder-to-Roof

A controlled access zone, for safer step-on and step-off for both temporary and fixed ladder points.

pg. 51

Access Point

Skylight & Smokevent

Mounts to the skylight frame and over these roof openings, making it virtually impossible to experience a skylight related fall.

pg. 52

Guardrail System

Domed Skylight

A controlled access zone, for safer step-on and step-off for both temporary and fixed ladder points.

pg. 53

Fall Protection Screens

Integrated Lightning Protection

Galvanized screens install quickly, easily and without penetration to ensure long-term performance, safety and compliance.

pg. 54

Guardrail System

Weighted bases prevent tipping and allow configuration to adapt to almost any situation.

pg. 45

Ballasted Guardrail System

Deck Mount Guardrail

Our unique design allows pre-fabricated pipe boots to be used to flash stanchion penetrations unlike traditional deck mount guardrails.

pg. 49

Arrives on site pre-finished vs painting in the field.

The guardrail can be laid down when not in use for situations when a guardrail needs to be hidden from view.

pg. 55

Collapsible Guardrail System


[email protected]

USM GUARDRAILPERMANENT FALL PROTECTION

The USM Guardrail system provides permanent full-perimeter fall protection with a unique design that allows 100% water-tight installation under standard roofing and sheet metal details including coping caps, drip edges, gravel stops and even inside most commercial gutters without penetrating the roof membrane. Our “Zero Penetration” attachment under standard perimeter edge details allows full access to the entire roof surface, wall flashings and sheet metal. The USM Guardrail system can be installed prior to roof construction and even left in place during complete roof replacement. Powder coated steel colors available to match Kynar® sheet metal or other building component, RAL colors and hot-dipped galvanized. USM Guardrail meets and exceeds OSHA Standards and International Building Codes (ICC).

The unique mounting and upright design allows our guardrail system to remain in place whether it’s a complete re-roof project, edge metal replacement, equipment maintenance, facility lighting or security camera work, our guardrail remains in place providing full-perimeter fall protection. Installation of the permanent guardrails can typically be installed using the existing coping cap metal, eliminating the added cost of new metal. USM Guardrail, uprights are designed to keep workers away from the leading edge while still allowing full access to the roof surface and building perimeter.

Maintenance made easy: Eliminates the need for tie-off points..

MOBILE FALL PROTECTION ROOFING EQUIPMENT CUSTOM SERVICES ABOUT USINTRO


TEMPORARY FALL PROTECTION PERMANENT FALL PROTECTION

Dimensions

Uprights1.66” x 1.40” schedule 40 pipe [ASTM A53] welded to 2”x 3”x 3.5” steel block [ASTM A36] and 3/16” steel plate [ASTM A36] bracket with pre-punched holes and slots for permanent structural attachment

Horizontal Rails 1.625”x 0.065” and 1.375”x 0.65”

Corners 20.5” o.c. outside corner; 12.5” o.c. inside corner

Weight Uprights Horizontal Rails Corners

12 LBS 1 LB per lineal foot 2 LBS

InstallationCoping caps, gravel stops, drip edges and most commercial gutters.

ComplianceMeets and exceeds OHSA standard CFR 29 1910.501, 29 1910.502, 29 1910.29 CAL-OSHA §1620, CAL-OSHA §1621, CAL-OSHA §3209, CAL-OSHA §3210, ANSI/ASSE A1264.1-2007, USACE EM 385-1-1 (21.E.01 a-c)


[email protected]

WALL MOUNT GUARDRAILPERMANENT FALL PROTECTION

The Wall Mount Guardrail system provides permanent full-perimeter fall protection with a unique design that allows water-tight installation using a dual plate mounting system. The dual plate mounting system allows roof flashing to be installed over the base plate and creates a compression seal around mounting studs when the upright plate is attached. The Wall Mount Guardrail system is available in powder coat colors to match Kynar® sheet metal or other building components, RAL colors and hot-dipped galvanized. The Wall Mount Guardrail system meets and exceeds OSHA Standards and International Building Codes (ICC).

Leading Edge Safety provides a never seen before mounting system for wall-mounted attachment with a patent-pending backup plate system to ensure water-tight installation. This product’s dual-plate mounting system provides full-perimeter fall protection with water-tight installation to the inside of parapet walls, preventing potential water infiltration that could damage the structure and interior of the building. The design of the the Wall Mount guardrail system also allows for installation on the outside of walls using a single plate mounting system.

With a commitment to providing the safest fall protection guardrails, you can enjoy peace of mind on the next low-slope roofing project that requires attachment to the inside of parapet walls.

Protect your investment: water-tight installation inside of parapet walls protects your building.




Dimensions

Uprights Custom designed to OSHA standards

Horizontal Rails 8'0" o.c.; 120" to 70", 70" to 43", 43" to 29" adjustable

Corners 20.5” o.c. outside corner; 12.5” o.c. inside corner


18 LBS 1 LB per lineal foot 2 LBS

MaterialsUprights 1.25" schedule 40 steel pipe (ASTM A53) - 1.66' O.D. x 0.140" wall

Horizontal Rails 1.625" x 0.065" and 1.375" x 0.065" (ASTM C1008/1010) steel tube adjustable rails

Mounting Bracket 3/16" steel plate (ASTM A36) bracket with pre-punched holes for mounting stud attachment

Hardware 3/8" - 16" x 1" zinc plated fasteners

ComplianceMeets and exceeds OHSA standard CFR 29 1910.501, 29 1910.502, 29 1910.29, CAL-OSHA §1620, CAL-OSHA §1621, CAL-OSHA §3209, CAL-OSHA §3210, ANSI/ASSE A1264.1-2007, USACE EM 385-1-1 (21.E.01 a-c), and ICC Building Codes


[email protected]

STANDING SEAM GUARDRAILPERMANENT FALL PROTECTION

The Standing Seam Guardrail system provides permanent full-perimeter fall protection with a unique design that allows 100% water-tight installation with standard roofing and sheet metal details. The Standing Seam Guardrail System attaches to the structural metal panels with pre-engineered S-5™ clamps ensuring solid and maintenance free installation without penetrating the roof panels. Hot-dipped galvanized or powder coated steel colors available to match Kynar® sheet metal or other building components and RAL colors.

When you need high-quality guardrails that can safely attach to metal roofs, look no further than the standing seam solution from Leading Edge Safety. The standing seam guardrail utilizes the S-5 clamping system, ensuring zero damage to the roof panels and maintenance free attachment. This guardrail system provides long-lasting fall protection for maintenance and roofing applications. Standing Seam Guardrail meets and exceeds OSHA Standards and International Building Codes (ICC).

Zero Penetration: S-5™ clamping system ensures no damage on your roof installation




STANDING SEAM GUARDRAIL

Dimensions

UprightsCustom designed per project to OSHA standards to meet roof pitch and panel width and IBC code requirements

Horizontal Rails 8'0" o.c. 120" to 70", 70" x 43", 43" x 29" adjustable

Corners 90° - 120° adjustable hinged corner


25LBS 1 LB per lineal foot 2 LBS

MaterialsUpright 1.125" schedule 40 pipe (ASTM A53) mounted to 1/4" x 12" x 26" base plates

(ASTM A36)) with pre-punched holes and slots for permanent structural attachment

Horizontal Rails 1.625” x 0.65” and 1.375” x 0.65” ASTM C1008/1010) steel tube adjustable slide rails.

ComplianceMeets and exceeds OHSA standard CFR 29 1910.501, 1910.502, 1910.29, CAL-OSHA §1620, §1621, §3209, §3210, ANSI/ASSE A1264.1, USACE EM 385-1-1 (21.E.01 a-c), and ICC Building Codes


[email protected]

WARNING LINES

PERMANENT FALL PROTECTION

The Permanent Warning Line system is a fast, easy, and economical way to erect warning lines. Designed to designated areas and to alert workers of dangerous conditions, this system can help prevent accidents. Heavy weighted bases prevent tipping in high winds, while nylon-coated steel cables and warning flags every 6’ or less ensure barrier visibility. Aluminum warning flags eliminate the need for frequent inspection to replace torn or worn out flagging.

A permanent flagging system




The ballasted guardrail is a fast, easy and economical way to erect a permanent guardrail system to keep workers safe while increasing their productivity. Weighted bases prevent tipping and allow configurations to adapt to almost any situation. Ballasted guardrail can be used at perimeters, open curbs, skylights, stair openings and anywhere else a leading edge requires fall protecton.

Applicable for permanent applications.

Key Features

• Heavy weighted bases prevent tipping

• Non penetrating


• Compliance comes standard: OHSA Standard 29 CFR 1926.501, 1926.502, 1910.29, Cal-OSHA §1620, §1621, §3209, §3210, ANSI/ASSE A1264.1-2007, and USACE EM 385-1-1 (21.E.01 a-c)

Item # Description

#WBPR-ADJ-120-RN-ASM Rivet Nut Rail Attachment Points withTwo Large Adjustable Rails (Adjusts 70' - 120')

#WBPR-ADJ-070-RN-ASM Rivet Nut Attachment Points with Two Medium Adjustable Rails (Adjusts 43' - 70')

#WBPR-ADJ-043-RN-ASM Rivet Nut Rail Attachment Points with Two Small Adjustable Rails (Adjusts 29' - 43')

#WBPR-ADJ-010-RN-ASM Rivet Nut Attachment Points with Two 10' Rails

#WBPR-ADJ-008-RN-ASM Rivet Nut Rail Attachment Points with Two 8' Rails

#WBPR-ADJ-005-RN-ASM Rivet Nut Attachment Points with Two 5' Rails

#WBPR-ADJ-004-RN-ASM Rivet Nut Rail Attachment Points with Two 4' Rails

#WBP-RN-ASM Rivet Nut Attachment Points

#WB-AC Corner Adjustable Hinge Corner

HEX KEY BOLTS FOR PERMANENT INSTALLATION

BALLASTED GUARDRAIL



[email protected]

ROOF HATCH GUARDRAILPERMANENT FALL PROTECTION

The Roof Hatch Guardrail system was strategically designed by experts with years of experience in the fall protection industry to ensure compliance, safety and ease of use. Self-closing gate and built-in landing area provide maximum safety and security to users. The integrated GrabSafe™ hand holds provide permanent ladder extensions to assist in comfortable and safe egress and ingress of the ladder while maintaining 3–point contact.

With more built-in safety features then the competition and engineered to exceed 250lb concentrated loads, the Roof Hatch Guardrail is your ultimate choice for safety.

Universal Safety: Fits most brands of roof hatches with flashing flange.




Dimensions

Industry standard sizes 30" x 36", 30' x 54", 30" x 96", 36" x 36" and other sizes available upon request.

Weight varies by size

Railing 1.625” x .065” and 1.375” x 0.625” [ASTM C1008/1010] steel tube adjustable side rails,steel tube (ASTM C1008/1010) welded to 10 gauge steel (ASTM A1011 CS Type B) bracket with 3/8” pre-punched slots for thru-bolt attachment.

GrabSafe™ 1" x 10.5" steel tube (ASTM A513) welded to 10 gauge steel (ASTM A1011 CS Type B) bracket.

ComplianceMeets and exceeds OHSA standard CFR 29 1910.501, 1910.502, CAL-OSHA §1620, §1621, §3209, and §3212, ANSI/ASSE A1264.1, ANSI/ASSE A1264.1, USACE EM 385-1-1, (21.E.01 a-c).

WALKTHROUGH WIDTH & SOLID LANDING AREA

3 POINTS OF CONTROL


[email protected]

DECK MOUNT GUARDRAILPERMANENT FALL PROTECTION

The Deck Mount Guardrail system provides permanent full-perimeter fall protection. Our unique design allows pre-fabricated pipe boots to be used to flash stanchion penetrations unlike traditional deck mount guardrails. Pipe flashings can be placed over the Deck Mount uprights prior to installation of the horizontal railing, a preferred method over field wrapping penetrations. Unlike traditional systems, horizontal rails can be removed during future re-roofs to allow new pipe flashings to be installed. Powder coated steel colors available to match Kynar® sheet metal or other building components and RAL colors. Deck Mount Guardrail meets and exceeds OSHA Standards and International Building Codes (ICC).

The modular design is easier to handle then traditional bulky pre-fabricated systems and arrives on-site prefinished versus in-the-field painting. Leaky pitch pans are no longer needed when a deck mounted guardrail system is required for your project.

Convenient: Arrives on-site prefinished versus in-the-field painting.




DECK MOUNT GUARDRAIL

Dimensions

Uprights Custom designed per project to OSHA standards and IBC code requirements

Horizontal Rails 8'0" o.c. 120" to 70", 70" x 43", 43" x 29" adjustable

Corners 20.5” o.c. Outside Corner; 12.5” o.c. Inside Corner


25LBS 1 LB per lineal foot 2 LBS

MaterialsUpright 1.625” x .25” steel tube (ASTM A-513-5-08A DOM Grade 1026) welded to 6” diameter x 3/8”

steel plate (ASTM A-572) with pre-punched holes for permanent structural attachment.

Horizontal Rails 1.625” x .065” and 1.375” x .065” (ASTM A-513 DOM Grade 1020) steel tube adjustable slide rails.

ComplianceMeets and exceeds OHSA standard CFR 29 1910.501, 1910.502, 1910.29, CAL-OSHA §1620, §1621, §3209, §3210, ANSI/ASSE A1264.1, USACE EM 385-1-1 (21.E.01 a-c), and ICC Building Codes


[email protected]

LADDER-TO-ROOF ACCESS POINT


The Ladder-to-Roof access point provides permanent fall protection, a controlled access zone, and safer step-on and step-off for both temporary and fixed ladder points. Our “Zero Penetration” attachment will not damage the roof or flashings, prevents moisture from entering the building, and will not void the roof warranty.

Key Features

• Permanent & Compliant: controlled roof access zone

• Quick & Easy Install

• Adjustable: Can be adjusted for various ladder widths

Dimensions

Adjustable 5'-6"W x 4'-8" to 6'-11" adjustable

Weight 230 LBS

Materials

Uprights 1.625” x .065” (ASTM C1008/1010) steel tube

Horizontal Rails0.625” x .065” (ASTM C1008/1010) and 1.375” x .065” (ASTM C1008/1010) steel tube adjustableslide rails.

Weighted Bases 23” x 23” Cast 35 Gray Iron

Self-Closing Gate1.625” x .065” steel tube (ASTM C1008/1010), 16 gauge steel plate (ASTM A1008 CS Type B)

ComplianceMeets and exceeds OHSA standard CFR 29 1910.29, CAL-OSHA §3212, CAL-OSHA §3209, ANSI/ASSE A1264.1-2007, ANSI/ASSE A14.3-2008 section 5.3.4.3 and US Army Corps of Engineer Requirement EM 385-1-1.

SAFE TRANSITION.CONTROLLED ACCESS




SKYLIGHT GUARDRAIL


The Skylight Guardrail system, specifically crafted per application, is securely attached to the skylight structure–providing both compliance and peace of mind for workers. The skylight guardrail system mounts to the skylight frame and over these roof openings, making it virtually impossible to experience a skylight-related fall.

Key Features

• Customizable to fit virtually any size skylight

• Installs under acrylic dome skylight flashings for "Zero Penetration" attachment

• 4-sided permanent protection

• Prevents sitting or standing on skylights

• Adaptable for smoke vent application

Dimensions

Custom designed to fit virtually any size acrylic dome skylight, structural skylight or smoke vent

Sizes

Uprights 1.625” x .065” steel tube (ASTM C1008/1010) welded to 2” x 3” x 3.5” steel (ASTM A36) block and ¼” steel (ASTM A36) bracket with 3/8” pre-punched slots for attachment.

Horizontal Rails 1.625” x .065” (ASTM C1008/1010) and 1 1.375” x .065” (ASTM C1008/1010) steel tube adjustable slide rails.

Compliance

Meets and exceeds OHSA standard CFR 29 1910.29, CAL-OSHA §3212, §3209, ANSI/ASSE A1264.1-2007, ANSI/ASSE A14.3-2008 section 5.3.4.3 and US Army Corps of Engineer Requirement EM 385-1-1.

PEACE OF MIND.SKYLIGHT PROTECTION

Dimensions

Adjustable 5'-6"W x 4'-8" to 6'-11" adjustable

Weight 230 LBS

Materials

Uprights 1.625” x .065” (ASTM C1008/1010) steel tube

Horizontal Rails0.625” x .065” (ASTM C1008/1010) and 1.375” x .065” (ASTM C1008/1010) steel tube adjustableslide rails.

Weighted Bases 23” x 23” Cast 35 Gray Iron

Self-Closing Gate1.625” x .065” steel tube (ASTM C1008/1010), 16 gauge steel plate (ASTM A1008 CS Type B)

ComplianceMeets and exceeds OHSA standard CFR 29 1910.29, CAL-OSHA §3212, CAL-OSHA §3209, ANSI/ASSE A1264.1-2007, ANSI/ASSE A14.3-2008 section 5.3.4.3 and US Army Corps of Engineer Requirement EM 385-1-1.


[email protected]

SKYLIGHTSCREEN

FALL PROTECTION SCREENS

The Domed Skylight Fall Protection Screen provides permanent fall protection at skylights and will not penetrate the roof membrane. The “Zero Penetration” attachment will not damage roof flashings, prevents moisture from entering the building and will not void the roof warranty. Galvanized screens install quickly and easily to ensure long-term performance, safety and compliance.

Key Features

• Fits virtually any acrylic dome skylight

• Quick & Easy Install

• Zero Penetration attachment

• Galvanized finish

• Permanent protection

Dimensions

8'W x unlimited lengths; custom lengths & widths available

Weight 1.5 LB/Sq. ft

Materials

Screen 3" x 4" welded wire mesh, 0.195"Extrusion Outdoor PVC, extruded

Retaining Clips Stainless Steel

ComplianceMeets and exceeds OHSA standard CFR 29 1910.29, 1910.501, CAL-OSHA §1632, CAL-OSHA §3212, ANSI/ASSE A1264.1-2007.

SKYLIGHT SAFETY.ATTRACTIVE PROTECTION




Packing up to 100 million volts of electricity, a bolt of lightning has the power to explode walls of brick and concrete, rip through roofs and ignite deadly fires. Most tragically, lightning kills. The Lightning Rail™ reduces all of these risks by providing a continuous lighting protection system at the perimeter of your building including passive fall protection per OSHA and Building Code requirements. This one of a kind UL Certified system helps to ensure you are protecting one of your organization’s largest investments.

Key Features

• Can be used with Leading Edge permanent guardrail systems

• Can be left in place during complete roof replacement, eliminating cost of recertification

• Eliminates the need for spires

• Integrated system is cost effective

Dimensions Weight

Caps 5.75" x 1.75" ID 0.75 LBS

End Connectors 4.75" x 1.70" ID 0.825 LBS

Corner Connectors 4.75" x 1.10" ID 0.463 LBS

Horizontal Rails 8' o.c. and field cut to length 1.04 LBS / Lineal ft

Materials

Caps Cast 356.1 Aluminum

Horizontal Rails Cast 356.1 Aluminum

Hardware Cast 356.1 AluminumHorizontal Rails 1.66" x 0.191" schedue 80

aluminum

ComplianceUL Listed (UL96, UL96A & Eligible for UL Master Label)

YEAR ROUND SAFETY.CONTINUOUS UL PROTECTION

LIGHTNING RAIL

LIGHTNING PROTECTION


[email protected]

COLLAPSIBLE GUARDRAIL


The patent pending collapsible guardrail is a fast and economical guardrail. Similar to the ballasted guardrail, weighted bases prevent tipping. The guardrail can be laid down when not in use for situations when a guardrail needs to be hidden from view.

HIDDEN TEMPORARY FALL PROTECTION

Out of sight after roofwoork.

Panels lift and fold down.

Key Features

• Weighted bases prevent tipping

• Easy to install and use

• No penetrations or fasteners required

• Toe board brackets on all four corners

• 100% protection during deployment


Dimensions

Panels 42” x 1.625” x 0.065”

Bases 23” x 23”

Adapter 1/4” steel plate

Horzontal Rails 1.625” x 0.625”

Patent

Sizes

Panels 8 foot6 foot5 foot4 foot

WeightBase – 100 LBS

Rail locks automatically into place during deployment:no need for tools or pins

MOBILE FALL PROTECTION ROOFING EQUIPMENTPERMANENT FALL PROTECTION ABOUT USINTRO


TEMPORARY FALL PROTECTION CUSTOM SERVICES

DESIGN SERVICES

CUSTOM 3D MODELINGFrom full-scale models to on-site mock ups, we have the skills and expertise needed to help you handle your 3D printing needs.

Whether you need 3D modeling services to create custom fall protection items like guardrails or to make equipment modifications, we can help. Leading Edge Safety has the engineering know-how and industry experience needed to bring your vision to life. The great thing about 3D engineering is the fact that we can replicate whatever job site or equipment modification you have in mind. You dream it, we will reproduce it in brilliant 3D modeling. SCALED PROTOTYPINGDo you need to examine a few components of your next big project? Or, perhaps you would like to analyze one aspect of it? No matter what your prototyping needs are, Leading Edge Safety has the ability to help provide scaled models of your next build. Allow the professionals at Leading Edge Safety to be of assistance.

Using 3D printing to produce a scaled replica of your next big construction or engineering project allows you to get a realis-tic idea of what you can expect, before you begin. As a result, you can expect smoother builds and a better overall finished product.

FULL-SCALE PROTOTYPINGIn addition to providing scaled prototyping, we offer full-scale prototyping that gives you a comprehensive look at your next project.

Full-scale prototyping is an easy way for you to get a complete look at your project before you even break ground. Using 3D printing technology, we help provide a comprehensive picture of your next project with the creation of realistic site mockups. Viewing all the angles allows you to get prepared beforehand, so your build can be executed as smoothly as possible. When it comes to full-scale prototyping, nobody does it better than Leading Edge Safety. With a large knowledge base and a wide scope of experience allows us to give you the service your project demands and deserves.

METAL FABRICATIONFrom specialized material carts to custom construction equipment additions, use our metal fabrication services to get your next project to the next level.

The full-service metal fabrication shop at Leading Edge Safety is prepared to handle your most demanding projects. Using the latest industry technology and a team of skilled professionals, you can always count on us to satisfy your metal fabrication needs. Metal fabrication is not a weekend DIY project. It requires the expertise of skilled professionals with years of experience. And that is exactly what you will find when you partner with Leading Edge Safety.

COMPLETE BUILD DESIGNWhether you have a minor engineering project or a full-scale construction project, our experts can help you provide everything from on-site project evaluation to comprehensive budget estimates.

The professionals at Leading Edge Safety will take your next project from start to finish, providing the services you require to get the results you need. We know you are busy being builders, engineers, and architects, so you can leave the not-so-fun details to our team. Want to learn how we can help?

Below is a comprehensive list of our services:

• On-site Evaluation• Budget Numbers• Layout for your project, utilizing

cutting-edge products and custom design solutions that fit specific applications

• Engineering service• Fabrication• On-site training for the installation of

special products or equipment modifications

STAMPED ENGINEERINGDo you need a construction equipment modification or custom-tailored guardrail created for your next project? If so, we can help. Once we have outlined your equipment objectives, we will handle the third-party facilitation of PE stamping.

Whether you need custom fall protection service or would like to make equipment modifications to enhance your day-to-day job site productivity, Leading Edge Safety is your solution. Our no fail two-step process is simple and effective, always getting you the results you need, when you need them most.

The way our stamped engineering service works is easy. Simply work with one of our in-house engineers to create a design that is suited for your project. After you have reviewed and approved the design, we will facilitate third-party evaluation and PE stamping for all engineering products shipped and used in the United States and Canada.

Key Features

• Weighted bases prevent tipping

• Easy to install and use

• No penetrations or fasteners required

• Toe board brackets on all four corners

• 100% protection during deployment



[email protected]

NORTHAMERICA

DISTRIBUTORS

With wide distribution across the United States, our products are conveniently located near you. We work hard with our distrubutors to deliver a quality product to your jobsite in a timely manner.

Mobile Fall Protection, Temporary Fall Protection & Roofing Equipment

Please contact Leading Edge Safety directly for a custom quote on permanent guardrail.

Permanent Fall Protection

MOBILE FALL PROTECTION ROOFING EQUIPMENTPERMANENT FALL PROTECTION CUSTOM SERVICESINTRO


TEMPORARY FALL PROTECTION ABOUT US

ABOUTUS

Located just north of the river in the heart of Kansas City, we build and manufacture high quality fall protection equipment for contractors. Home of the Raptor TriRex™, our team is well known throughout North America for delivering a consistently well built product that has been proven to save lives. In addition to the Raptor™ family, we manufacture safety rails for commercial roofing application. Time tested and 100% compliant, our products are leading the fall protection industry.

Industry Experts

P: 888.990.2990 F: 816.472.0822

Leading Edge Safety1345 Taney StNorth Kansas City, MO 64116

[email protected]@leadingedgesafety.net

http://www.leadingedgesafety.net@leading_edge_us

linkedin.com/company/leading-edge-safety-inc

@L.E.Safety

bit.ly/2FJ6Qq4

@leadingedgesaftety


[email protected]

NOTES

P: 888.990.2990 F: 816.472.0822

Leading Edge Safety1345 Taney StNorth Kansas City, MO 64116

[email protected]@leadingedgesafety.net

http://www.leadingedgesafety.net@leading_edge_us

linkedin.com/company/leading-edge-safety-inc

@L.E.Safety

bit.ly/2FJ6Qq4

WE TAKE THE FIRST STEP SO YOU DON'T TAKE YOUR LAST

leading edge safetyleadingedgesafety.net/wp-content/uploads/2020/02/leading... · 2020-06-30 ·...

Documents