ld-18 quick-ref frnt€¦ · adjust so the sound level is between 30 – 70, and sounds are clearly...

1
LD-18 Digital Water Leak Detector Operating Instructions LD-18 Quick Reference Guide Controls and switches for the LD-18 digital amplifier: 3. Amplifier’s LCD Display screen for listening and pinpointing: 4. Minimum (Continuous) Noise Level Detected The LD-18 Digital Water Leak Detector is primarily designed for water leak “pinpointing,” the term used to describe the task of finding the exact location directly over a leak in a pressurized water pipe: 1. The LD-18 has both Standard Accessories and Optional Accessories: 2. Adjustments in the field: 5. Listening with the LD-18 directly over the pipe Listening at different spots to detect differences in loudness of the leak LD-18 Amplifier Face Low Filters Control Noise Reduction Switch High Filters Control Connector for Ground Microphone with Handswitch Use the Sensitivity Control to adjust the Sensitivity Level. Adjust so the Sound Level is between 30 – 70, and sounds are clearly heard in the headphones. Release the Mute Switch when moving the Ground Microphone. Press the Mute Switch to listen. Use the LO Filters Control to remove extraneous continuous noises from motors, wind, and highways. Listen at each spot over the pipe for 30 – 60 sec. or longer. Are there leak sounds or not? 1 2 3 4 5 6 Standard Accessories Optional Accessories Amplifier with LCD Display, Controls, and USB Connection (to PC Computers) Padded Case for Amplifier 40 inches Belt (50 inches and 60 inches Optional) Ground Microphone and Handswitch Magnet Base and Nutdriver Heavy-Duty ABS Plastic Carrying Case Aviation-Grade Stereo Headphones PC Software and USB Cable 1 2 3 4 5 6 7 7 8 8 Sensor with Strong Magnet and 9.75 ft. Cable (to listen at valves and hydrants) USB Connector ON/OFF Switch Save Switch File Switch Back-light Switch Sensitivity Control LCD Display Mute Switch for Optional Sensor with Strong Magnet and 9.75 ft. Cable Notch Filter Headphones Connector Band Pass Filters (Off, 100, 200, 400 Hz and 400, 600, 800, 1200, 2200 Hz) Notch Filters (Off, 50, 60 Hz) Noise Reduction (Levels .2 sec., 1.0 sec., 3.0 sec.) Backlight ON Battery Life Remaining Bar Graph of Sound Level Sensitivity Level (0 – 40) Numerical Value of Sound Level (0 – 99) 9 9

Upload: others

Post on 07-Nov-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LD-18 Quick-Ref Frnt€¦ · Adjust so the Sound Level is between 30 – 70, and sounds are clearly heard in the headphones. Release the Mute Switch when moving the Ground Microphone

LD-18 Digital Water Leak Detector

Operating Instructions

LD-18 Quick Reference Guide

Controls and switches for the LD-18 digital amplifier:3.

Amplifier’s LCD Display screen for listening and pinpointing:

4.

Minimum (Continuous) Noise Level Detected

The LD-18 Digital Water Leak Detector is primarily designed for water leak “pinpointing,” the term used to describe the task of finding the exact location directly over a leak in a pressurized water pipe:

1.The LD-18 has both Standard Accessories and Optional Accessories:

2.

Adjustments in the field:5.

Listening with the LD-18 directly over the pipe

Listening at different spots to detect differences in loudness of the leak

LD-18 Amplifier Face

LowFiltersControl

NoiseReduction

Switch

HighFiltersControl Connector

for Ground Microphone

with Handswitch

Use the Sensitivity Control to adjust the Sensitivity Level. Adjust so the Sound Level is between 30 – 70, and sounds are clearly heard in the headphones.

Release the Mute Switch when moving the Ground Microphone. Press the Mute Switch to listen.

Use the LO Filters Control to remove extraneous continuous noises from motors, wind, and highways.

Listen at each spot over the pipe for 30 – 60 sec. or longer. Are there leak sounds or not?

1

2

3

4

5

6

Standard Accessories

Optional Accessories

Amplifier with LCD Display, Controls, and USB Connection (to PC Computers)

Padded Case for Amplifier

40 inches Belt (50 inches and 60 inches Optional)

Ground Microphone and Handswitch

Magnet Base and Nutdriver

Heavy-Duty ABS Plastic Carrying Case

Aviation-Grade Stereo Headphones

PC Software and USB Cable

1

2

3

4

5

6

7

7

8

8

Sensor with Strong Magnet and 9.75 ft. Cable (to listen at valves and hydrants)

USBConnector

ON/OFFSwitch

SaveSwitch

FileSwitch

Back-lightSwitch

SensitivityControl

LCDDisplay

Mute Switch forOptional Sensor

with StrongMagnet and

9.75 ft. Cable

NotchFilter

HeadphonesConnector

Band Pass Filters(Off, 100, 200, 400 Hz and

400, 600, 800, 1200, 2200 Hz)

NotchFilters

(Off, 50,60 Hz)

NoiseReduction

(Levels.2 sec.,

1.0 sec.,3.0 sec.)

Backlight ON

Battery LifeRemaining

Bar Graph ofSound Level

Sensitivity Level (0 – 40)

Numerical Value of Sound

Level (0 – 99)

9

9