lcd-monitor belinea 1925 s1w · monitor using the power switch ( in fig.4). the status indicator (...

LCD-MonitorBelinea 1925 S1W

Handbuch Manual Ma-nuel Manuale Handleiding Handledningen Hånd-bok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handledningen Håndbok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handledningen Håndbok Vej-ledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handled-ningen Håndbok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handledningen Håndbok Vejledning

BELINEA PREMIUM SERVICE

The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. This does not affect your Statutory Rights. Please visit http://www.belinea.com or call the numbers below for further warranty or service information. Please have the serial and model number ready when calling.

Die Garantie für Ihren Belinea-Monitor beträgt drei Jahre und umfasst alle Bauteile. Darüber hinaus bieten wir in vielen Ländern einen zusätzlichen, kostenlosen Austausch-Service an. Von dieser o. g. Garantie bleiben etwaige gesetzliche Gewährleistungsrechte unberührt. Nähere Informationen zu Garantie- und Servicefragen erhalten Sie im Internet unter http://www.belinea.com sowie unter den u. g. Rufnummern. Bitte halten Sie für Ihren Anruf Serien- und Modellnummer bereit.

La garantie internationale de trois ans sur les écrans Belinea s’entend pièces et main d’œuvre. Pour obtenir plus d’informations sur la garantie et le service après-vente contactez-nous sur Internet http://www.belinea.com ou aux numéros de téléphone ci-dessous. Vous pouvez obtenir également plus de détails sur les possibilités d’échange gratuit, service offert dans de nombreux pays. Pour votre appel, tenez les numéros de série et d’article à portée de main.

English

Deutsch

Français

Country Phone number Additional swap out serviceLand Telefonnummer Zusätzlicher Austausch-ServicePays Numéro de téléphone Service supplémentaire d’échange sur site

Belgie/Belgique 090010630(0,45€/min) 3yearon-sitewarranty(swapout)

Deutschland 02365 952 1010 3 Jahre Garantie-Austausch-Service

Českárepublika +420383369146 Záruka3roky

España 090 21 96 497 3 años de garantia con intercambio a domicilio

Ελλαδα 2104805800 Εγγυηση3χρονιαεπιτοπουαντικατασταση

France 0820091820 3ansdegarantieavecéchangestandardsursite

Hrvatska +38513654960 3godinejamstva

Italia 199 156 169 3 anni di Garanza di sostituzione a domicilio

Ireland 0035312861343 3yearon-sitewarranty(swapout)

Luxemburg/Luxembourg 090074235(0,45€/min) 3yearon-sitewarranty(swapout)

Magyarország 013409951/53 3évhelyiszerviz

Nederland 0900BELINEA(02354632) 3yearon-sitewarranty(swapout) (0,70€/Gesprek)

Österreich 012778988 3JahreVor-Ort-Austausch-Garantie

Polska 0713371955/0228632777 3latagwarancji(doortodoor)

Portugal 0902196497 3AnosdeTrocaemGarantiaOn-Site

Ðîññèÿ +49(0)1805629468 Òðåõëåòíÿÿ ãàðàíòèÿ ñ çàìåíîé íà ðàáî÷åì ìåñòå

Schweiz 0900575111(2,13CHF/min) 3JahreVor-Ort-Austausch-Service

Slovenija +38615837247 3letagarancije

UnitedKingdom 01344788920 3yearon-siteswapoutwarranty (UKmainlandonly)

All other countries AlleanderenLänder +49(0)1805629468Les autres pays

Belinea1925S1W-OperatingInstructions-�

ENGLISH

INTRODUCTIONThis manual will familiarize you with the installation and use of your Belinea monitor. Please take the time to look through these instructions even if you are familiar with monitors.

We have taken all possible care to ensure that this manual contains correct, accurate information. However, the manufacturer cannot assume liability for any possible errors. In addition, the manufacturer cannot guarantee that the hardware will meet the purpose you require. We would appreciate reports of any errors, suggestions or criticism.

© Copyright 2006 MAXDATA Systeme GmbH 45768Marl,Germany www.maxdata.com

Editing,DTPandtranslationbythink’ZGmbH, www.thinkz.de.

All rights reserved. No part of this manual may be reproduced, processed or distributed in any form (print, photocopy,microfilmoranyotherprocess)orprocessedby an electronic system without prior written permission from the manufacturer.

We reserve the right to make changes according to technical progress. Belinea is an internationally registered trademark. Otherbrandnamesmayberegisteredtrademarksandmustbe treated as such.

TABLE OF CONTENTSINTRODUCTION ......................................................... 2

IMPORTANTINFORMATION ..................................... 3

CARINGFORyOURLCDMONITOR ........................ 3

WALLMOUNTING ...................................................... 3

UNPACkING .............................................................. 4

CONNECTING ........................................................... 4

STARTUP ................................................................... 4

CONFIGURATION ...................................................... 5

BASIC SETUP ............................................................ 5

IMAGESETTINGSUSINGTHEOSDMENU ............ 5

OSDMENUFUNCTIONS ........................................... 6

TROUBLESHOOTING ................................................ 7

TECHNICALSPECIFICATIONS ................................. 7

DEFINITIONOFTHEMAxDATAWARRANTy .........8

Guide to symbolsThe symbols below are used in this manual to indicate wherethereisriskofinjuryordamagingdevicesortoindicate especially useful information:

DANGER! Indicates risk of injury.When notfollowing instructions, severe injury or deathmay result.

ATTENTION! Indicates possible damage todevices. When not following instructions, devices may be heavily damaged.

IMPORTANT!Indicateshintsonoperationandother useful information.

We are all responsible for the environment: this manual was printed from front to back on paper that was produced without chlorine.

Important Safety InstructionsSome Belinea monitor models come with 2 power cords. PleaseensureyouusetheUKplug(3pin)intheUKandnottheEuropeanplug(2pin).

Do not place the monitor in very hot or cold, nor damp or dusty surroundings. Do not put vases etc. on the monitor, water may cause short circuits. Do not block or cover the ventilating openings. All products that produce magnetic fields,i.e.laserprinters,loud-speakersetc.,mustnotbeplaced close to the monitor. Do not install this monitor in areas where too much light or sunshine might directly hit the screen, otherwise the brightness of the picture willbepoorduetoreflections.Referallservicingandmaintenance to authorised service personnel only!

CAUTIONDo not remove the cover!Serious electrical shock hazards exist inside this monitor.

NOTERemoval of cover invalidates your warranty.


ENGLISH

• First, unplug the power cord from the wall socket.

• If the LCD screen is extremely dirty, clean it with a moist cloth. Use only warm water and then wipe the monitor dry. Solvents or harsh cleaners can damage the housing. Clean the display surface only with a soft cloth, otherwise you may damage the display’s coating.

CARING FOR yOUR LCD MONITOR

• If the monitor is only slightly dirty, clean it using a soft, dry and antistatic cloth.

• The LCD monitor’s screen surface is very sen-sitive. Please avoid any contact with the surface (finger, pencil etc.) andbeespecially cautiousduringtransportationsincejoltsandshockscancause the screen to become scratched (always usetheoriginalpackaging).

WALL MOUNTINGTheBelineamonitor is shippedwith the standard desktop configuration.However, you canoptionallymount thedevice on awall or on amonitor swivel arm (optional accessory). Please follow the corresponding instructions (4-holeassemblywithaspacingof100×100mmaccordingtotheinternationalVESAFDMIstandard).

IMPORTANT INFORMATION

Note on monitor placement• The setup location must not be extremely hot,

cold, humid or dusty. Heat and cold can impair the functionality of the monitor. Humidity and dust can cause the monitor to fail.

• Do not place the monitor near heaters such as radiators or the like. Do not expose the monitor tomechanicalvibrationsorjarring.

• Position the monitor so that no direct light or sun strikesthescreen,whichcouldcausereflectionsthat reduce the quality of the image.

Notes on power connection Onlyusethepowercorddesignatedforusein

your country. The wall outlet should be within easy reach. Pul-

ling the power plug is the only way to disconnect the monitor from the power source.

• Thismonitor is ENERGySTAR®-compatible. MAxDATA isanENERGySTAR® partner and guarantees that this device complies with the ENERGySTAR® guidelines for optimizing power consumption.

Safety instructions for operation The power cord must not be damaged. Do not

placeanyobjectsonthepowercordandmakesure it does not have any knots. To unplug the cord, always pull on the plug and not on the cable itself. Damagetothepowercordmayresultinfireor cause electric shocks.

• Avoid covering the ventilation slots. Air circulation is necessary to prevent the monitor from over-heating. If the air circulation is restricted it could causefireordamagethemonitor.

• Do not use any solvents to clean the monitor, as the housing could be damaged. For more infor-mation about cleaning the monitor, please see “CaringforyourLCDMonitor”.

Never open the monitor housing yourself. There is a danger of electric shock and other hazards. The monitor may only be opened and serviced byqualifiedprofessionals.

Note on resolution All resolutions provided by the graphics card that

deviate form the physical resolution of the panel areadjustedbyinterpolation.Thiscanimpairtheimage quality.

Notes on ergonomics In order to relieve your eyes, neck and shoulder

muscles when looking at the screen, we recom-mend that you maintain a distance of 50 to 75 cm between the monitor and your eyes. In addition, you can relax your eyes by regularly focusing on anobjectatadistanceofabout6m.Toachievean ergonomic sitting position, your elbows, pelvis, knees and ankles should form a right angle.


ENGLISH

CONNECTING To connect the monitor to your PC........................1. Make sure that the PC and monitor are unplugged. �. Connect the 15-pin signal cable to the PC (see

fig.2).

To connect the monitor to the power source ........Connect the separate power cable ( infig.3)tothemonitor and a grounded outlet.

Signal cable

Carefully lift the monitor out of the packaging and make surethatallcomponentsareincluded(seefig.1).

Save the original box and packing material in case you have to ship or transport the monitor.

To set up the device, youmust fit themonitor basetogether.

UNPACkING

STARTUP

1. First start your PC and then turn on your Belinea monitor using the power switch ( in fig.4).Thestatus indicator (infig.4)shouldlightupgreen.

�. Adjusttheimagetomeetyourrequirements(seethefollowing sections “Basic Setup”and“Image settings usingtheOSDmenu”).

�. If there is no image displayed on the monitor, consult thesection“Troubleshooting”.

Figure 1. Monitor with swivel base

Figure 2. Connecting the monitor to the PC

Power cord

Audio cable

VGA cable

Figure 3. Connecting the monitor to the power source

Connecting the audio cable....................................If your computer is equipped with an audio output port, then connect one end of the sound cable to the audio input connector of the monitor (infig.3)andtheotherendtotheLine-Outconnectorofthecomputer.

D-SUB AUDIO INAC IN D-SUB AUDIO INAC IN

12


ENGLISH

CONFIGURATION

Monitor setup under Windows® 9x/ME/�000 and XP:If using the monitor under Windows® 9x/ME/2000 or XP, we strongly recommend installing the Belinea con-figurationfile.youcanobtainthisfilefromyourBelineadealer or download it from the MAXDATA FTP server at ftp.maxdata.com.Here,click the“Belinea_Treiber_Driver”directoryanddownload the Belinea.inf and README_Belinea.TXT files.Followtheinstallationinstructionsinthe README_Belinea.TXTfile.

Monitor setup under Windows® NT �.0:Under Windows® NT 4.0 no separate setup file is required. Select the vertical frequency and the number ofcolorsdirectlyfromwithinthe“Settings” “Control Panel”“Display”“Settings”menu.

BASIC SETUP Setting the volume directly.....................................youcanadjustthevolumedirectlybypressingbutton> ( infig.4)whentheOSDmenuisnotdisplayedonscreen.youcanthenchangethevolumebypressingthe buttons < or > ( and infig.4).

Locking and Unlocking the OSD............................TolockandunlocktheOSDmenu,holddownthebuttoncombination < (infig.4)andMENU (infig.4)untila corresponding message is displayed.

Automatic Image Adjustment.................................youcanadjusttheimagesettings(suchasimageposi-tion,phase,etc.)manuallyorbyusingtheLCDmonitor’sautomaticimageadjustmentfeature.Thiswilladjusttheimage parameters to their optimal settings for the current graphics mode. Press AUTO (infig.4)tolaunchtheautomatic adjustment. The processwill take a shortwhile until completed.

Shortcut for adjusting contrast and brightness....you can adjust contrast and brightness directly bypressing the < button ( infig.4)whiletheOSDmenuis not displayed. Press the > button ( in fig.4) to increase the contrast/brightness or the < button ( in fig.4)todecreaseit.

IMAGE SETTINGS USING THE OSD MENU

TheOSDmenuisawindowonyourscreenthatallowsyou to view and change display settings. To change an OSDsetting:

1. Press the button MENU (infig.4)todisplaytheOSDmenuonthescreen.

�. Thereareatotalof5OSDsubmenusdividedbycate-gories. Select the desired submenu by pressing the OSDbutton< or > ( and infig.4; see section “OSDMenuFunctions”).

�. Press the button MENU (infig.4)toactivatetheselected function or associated submenu.

�. If you selected a submenu, now select the subfunc-tionyouwantusingtheOSDbuttons< or > ( and infig.4).

�. SetthedesiredvalueusingtheOSDbuttons< or > ( and infig.4).

6. The current settings are automatically saved when youreturntothepreviouslevelorexittheOSDmenu.Repeatsteps2–5 tomake furtheradjustmentsasneeded.

7. TheOSDmenu automatically disappears if nochanges are made for more than 45 seconds (default setting).Thecurrentsettingswillbesaved.youcanclose it manually by pressing the button AUTO ( infig.4).

Figure 4. Monitor features

Disabling the sound (MUTE)...................................youcanmutesoundplaybackbypressingthebutton> ( infig.4)while theOSDmenu isnotdisplayedon screen. Next, press the button MENU (infig.4)to mute the sound or press the button MENU again to reactivate it.

Belinea1925S1W-OperatingInstructions-6

ENGLISH

OSD MENU FUNCTIONS

BRIGHTNESS / CONTRASTBrightness: Adjusts brightness by using thebuttons < or > ( and infig.4).

Contrast: Adjustsscreencontrastbyusingthebuttons < or > ( and infig.4).

IMAGE CONTROL

OSD CONTROL

Language: OSDmenu language selection: English, French, German, Italian, Spanish, Dutch, Russian, Polish.

Speaker Volume: Adjuststhemonitorloudspea-ker output volume.

Information: ThereisanoptionalOSDwindow(on/off)thatdisplaysthenewlyadjustedscreenresolution settings.

Autoswitch: This option allows you to decide if the Auto Adjustment function should take effect after each change to the monitor’s resolution.

H. OSD Position: Controls theOSDmenu’shorizontal position.

V. OSD Position: Controls theOSDmenu’svertical position.

OSD Timeout: Determines how long (in seconds) theOSDmenuwaits before closingautomatically after no action has been perfor-med.

OTHERS

Auto Adjustment: Automatically selects the optimal settings for image parameters (image position,phase,etc.)byusingthebuttonMENU (infig.4).

H. Position: Controls the picture’s horizontal position.

V. Position: Controls the picture’s vertical posi-tion.

Clock: Sets up the internal clock. Larger values make the displayed image appear wider; smaller values make it appear compressed.

Phase:Adjusts the internal clock’s time lag inorder to optimize the screen image.

Sharpness: Controls image sharpness (only for resolutionslessthan1440×900pixels).

This menu lets you select a preset color tempera-ture (9�00 k, 6�00 k or sRGB (D6�))bypressingtheOSDbuttons< or > ( and in fig.4).Changes to the color temperature take immediate effect on screen. If you wish to set individual color values, select the Custom Color option. Then press the MENU button (infig.4)to select the red, green and blue settings and set the desired valueusingtheOSDbuttons< or > ( and infig.4).The current settings are automatically saved when you return to the previous level or exittheOSDmenu.

COLOR


ENGLISH

TROUBLESHOOTING

Blank ScreenPower indicator is off

- Makesurethepowercableisconnectedproperly(seesection“Connecting”).- Makesurethatthemonitorwasturnedonusingthepowerswitch(seesection“Startup”).

Power indicator lights orange - Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse.

Power indicator lights green- A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard

or move the mouse.“No Signal!” message

- IsthesignalcableconnectedtothemonitorandthePC’sgraphicsport(seesection“Connecting”)?- IsthePCturnedon(seeyourPC’sdocumentation)?

Display ProblemsImage is displaced to the left/right or to the top/bottom

- Iftheimageappearsnormalbutoff-center,youcanadjustitusingtheOSDfunctions.Forfurtherinformation,seechapter“BasicSetup”,section“AutomaticImageAdjustment”orchapter“OSDMenuFunctions”,section“Image Control”.Image flickers or is shaky

- Perhaps setup file chosen for themonitor is incorrect.For informationonmonitor setupunderWindows® 9x/ME/2000/NT/XP consultthe“Configuration”section.Image is blurred

- Check brightness and contrast settings (see chapter “OSDMenuFunctions”,section“Brightness/Contrast”).- Checkthesharpnesssetting(seechapter“OSDMenuFunctions”,section“Sharpness”).

Color problems- Ifthecolorsareoff(e.g.,whiteisnotreallydisplayedaswhiteetc.),youshouldadjustthecolortemperature(see

chapter“OSDMenuFunctions”,section“Color”).

LCD panel 19 wide inch diagonal size (48.3 cmvisible), low radiationaccording toTCO'99, certifiedtoISO13406-2,pixelfaultclassII,TN+Filmpaneltechnology

Contrast ratio 850:1(typical)/950:1(max.)Viewing angle (Contrast ratio ≥10:1)horizontal 160°, vertical 160°(typical)

(Contrast ratio ≥5:1)horizontal 168°, vertical 168°(typical)Response time 5ms(typical)Brightness 300 cd/m2 (typical)/320cd/m2 (max.)Input signal Video:analog(15-pinminiD-Sub)Display colors 16.2 mill. colors Synchronization 31–83kHzhorizontal,56–75HzverticalVideo band width 135MHz(pixelrate)Ergonomic resolution 1440 × 900 (60Hz)Audio Amplifier:2Wat8Ohms Loudspeaker: 1 W continuous load, 1.5 W peak powerPower connection 100–240 V AC, 50–60 HzPower consumption ONstatus:max.36.4W;colorofthestatusLED:green SLEEP status: < 2 W; color of the status LED: orange PowersavingfunctionsEPAcertifiedDimensions / weight Width:426mm,height:436mm,depth:210mm;4.6kg(net)Operating environment Operation:0to+40°C,humidity:20–80%(non-condensing) Storage:-20to+60°C,humidity:8–95%(non-condensing)

TECHNICAL SPECIFICATIONS


ENGLISH

DEFINITION OF THE MAXDATA WARRANTyThe MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur withintheproductspecificwarrantyperiod.Thewarrantyperiodbeginsonthedateofpurchase(dateoforiginalcus-tomerinvoice).

Please be aware that in order to maintain your warranty claim the product concerned has to be received by MAXDATA together with the serial number and a copy of the original customer invoice within the warranty period.

MAXDATA´s obligation under the warranty is restricted to repairing or exchanging defective components.

Defective components removed during repair process become the property of MAXDATA.

Components replaced within warranty coverage assume the remaining valid warranty period of the system.

Scope of the MAXDATA warranty:MAXDATA´s obligation under the warranty is limited to failures resulting from defective components and manufacturing defects,defectsintheCRT,panelandbackgroundlightingforelectricalerrors(pleasealsorefertothetermdefinitionandliabilityrestriction).

Exclusions from the MAXDATA warranty:

The MAXDATA warranty does not cover damage of any kind that results from:• The use of peripheral devices• Improper use/operating faults• Non-adherence to the user instructions• Attempted repairs by the customer or third-parties without authorisation by MAXDATA• Defective maintenance by third parties• Devicedefectsduetopowerfailure,heatlosses,missingEMC(electro-magneticcompatibility)cablingorsimilar

reasons• Accidents,storms,lightening,fire,water/otherliquids,othernaturalcatastrophes,theft,riots,plundering,theeffects

of war or other instances of acts of god• The use of third-party components• Non-authorised system changes• BIOSversions/firmwareupdates/programmestoremovedefectsofallkinds(e.g.,servicepacks,bug-fixes,hot-

fixes)• Resetting safety functions, deletion of passwords etc.• Lossofcustomer-specificdataorsoftwarefromrepairandinstallationprocesses• Improper use of machine capacity or output• Inappropriate customer operating environment

The MAXDATA warranty also does not cover the following: • MAXDATA products from which the category plates, serial numbers, part numbers on the machine of machine parts

have been removed or changed• Decline in rechargeable battery capacity after the end of the 6 month warranty period• TheprovisionandinstallationofBIOS,driverorsoftwareupdates/upgrades• The new installation of software/operating systems that are no longer able to run (e.g., because of the deletion of

system-relevantfiles,incorrectsystemsettingsorself-copyingprograms,e.g.,computerviruses)• Wear and tear on data storage media, LCD background lighting, CRTs on CRT monitors, picture tube burn-in or

loss of brightness• MAXDATA products for which the warranty seal has been broken by entities other than MAXDATA or those autho-

rised by MAXDATA• Breaks and scratches on TFT panels and CRT displays• Damage through use of force and external impact respectively• Spots on the panel caused by external impacts


ENGLISH

• Colour spots resulting from falls• Errorclass2pixelerrors(pleasenotetheinformationonISO13406-2onthewebsiteoftheMAxDATAsubsidiary

concerned)

If the device received by MAXDATA demonstrates two defects and only one of these is covered by the MAXDATA warranty claim, the customer only has the right to repair for the damage to his device covered by the warranty.

In this case MAXDATA reserves the right to offer the customer several options on resolution in the form of a quotation and to charge the relevant processing costs.

This also applies to those devices for which upon receipt, it is found that they are not covered by the warranty. In these cases, MAXDATA reserves ownership of the exchange device provided and is entitled to demand its return.

MAXDATA reserves the right to charge costs incurred for unsuccessful attempts to collect a device that has been registered as defective from the customer.

If an exchange device is not provided in spite of a period having been set, MAXDATA is entitled to charge the net sales price as per the current price list plus the processing costs incurred. The customer has the right to provide evidence for the existence of lower damages.

MAXDATA restriction to liability:MAXDATA expressly excludes customer claims that go beyond the warranty conditions if there is no obligation of liability imposed on MAXDATA by the laws of the country where the device was bought. This also applies in particular withregardtoclaimsfordamagesasaresultofdefault,damagesforclaimsarisingasaresultofdefects,lossofprofit,transport damage that was not registered within a period of 6 days after receipt of the goods, loss of data or information through repair processes or damage resulting from interruption to operations.

Governing law:AllrightsanddutiesaresubjecttothelawofthecountryinwhichtheMAxDATAproductwaspurchased.TheAgree-mentonContractsfortheInternationalSaleofGoods(CISG)isnotapplicable.

Data Backup:The responsibility for complete data backups, including of applications and operating system software remains exclu-sively with the customer. The data must be backed up before the warranty claim is made. MAXDATA excludes liability for any data or information lost for this reason during a warranty claim.

For further details regarding the MAXDATA warranty conditions please refer to www.maxdata.co.uk.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

AustriaMAXDATA Computer GmbHIgnaz-Köck-Straße 9, A-1210 WienPhone: +43 1 (0) 27789-0

BeneluxMAXDATA Benelux B.V.Bredaseweg 113-115, NL-4872 LA Etten-LeurPhone: +31 (0) 76 5039250

FranceMAXDATA S.A.R.L.7 avenue du Général de Gaulle, Bâtiment 4,F-91090 LissesPhone: +33 (0) 169 112990

GermanyMAXDATA Computer GmbH & Co. KGElbestraße 12-16, D-45768 MarlPhone: +49 (0) 2365 952-0

ItalyMAXDATA Italia S.r.l.Strada 1, Palazzo F1I-20090 Milanofiori, Assago (MI)Phone: +39 (0) 2 5777-91

PolandMAXDATA Sp. z.o.oUrsynów Business Parkul. Pu�awska 303, PL-02-785 WarszawaPhone: +48 (0) 22 5435800

Spain . PortugalMAXDATA Iberia s.l.c/Colquide, 6Edificio Prisma – Portal 1-B-Pta. 1aE-28230 Las Rozas (Madrid)Phone: +34 (0) 91 6375655

SwitzerlandMAXDATA Computer AGHaldenstraße 5CH-6340 BaarPhone: +41 (0) 41 766 32 32

United KingdomMAXDATA UK LimitedThe MAXDATA Centre, Downmill RoadBracknell, Berkshire, RG12 1QS, UKPhone: +44 (0) 1344 788900

Art

. No.

11

19 3

2 / M

arch

06

www.belinea.com

Belinea ist eine Marke der MAXDATA AGBelinea is a trademark of MAXDATA AGBelinea est une marque déposée de MAXDATA AG

lcd-monitor belinea 1925 s1w · monitor using the power switch ( in fig.4). the status indicator (...

Documents