lc-4.800 common use case setting guideline because · pdf fileon 12:00 disable cw stereo 12:00...

1
Use Case 5: 2 channel line level source (such as a phone) to Front Line Level Inputs 1-2 to Front Full Range Speakers (HP @ 80 Hz) 3-4 to Rear Full Range Speakers (HP @ 80 Hz) Line Output to Subwoofer Amp ACR-1 controls: Line Out to Subwoofer Amp CW Low Pass Disable Sum 12:00 12:00 9:00 12:00 Stereo Stereo CW Disable On 12:00 11:00 High Pass Disable Separate 12:00 CCW CCW 12:00 Stereo Mono CCW Disable Off CCW CCW High Pass Disable Separate 12:00 CCW CCW 12:00 Stereo Stereo CCW Disable Off 12:00 11:00 Low Pass Enable Separate 12:00 12:00 9:00 12:00 Mono Stereo 11:00 Disable On 12:00 High Pass Disable Sum 12:00 12:00 Stereo Stereo Disable Off CCW CCW High Pass Enable Separate 12:00 12:00 Stereo Stereo CCW Enable Off CCW Use Case 7: Factory Head Unit Sum Low, Mid and High Signals using Front High, Front, and Rear speaker level inputs 1-2 to Front Mid / Tweets (HP @ 300 Hz) 3-4 to Front Woofers (LP @ 300 Hz) Line Out to Subwoofer Amp ACR-1 controls: Line Out to Subwoofer Amp Use Case 4: Aftermarket Head Unit Line Level Inputs 1-2 Full Range to Front Speakers 3-4 Full Range to Rear Speakers No Subwoofer ACR-1 controls: not used in this case Use Case 6: Aftermarket Head Unit Head Unit Left to Front Left Line Level Input Head Unit Right to Rear Left Line Level Input 1-2 Bridged for Front Left Full Range 3-4 Bridged for Front Right Full Range ACR-1 controls: not used in this case Use Case 3: Factory Head Unit Sum High and Low Front Signals 1-2 for Front Speakers (HP @ 80 Hz) 3-4 for Subwoofer Amp (LP @ 80 Hz) ACR-1 controls: 3-4 output to Subwoofer Use Case 2: 2 channel line level source (such as a phone) to Front Line Level Inputs 1-2 to Front Full Range Speakers 3-4 to Rear Full Range Speakers No Subwoofer ACR-1 controls: Master Volume Use Case 1: Factory Head Unit Sum High and Low Front Signals 1-2 to Front Full Range Speakers (HP @ 80 Hz) 3-4 to Rear Full Range Speakers (HP @ 80 Hz) Line Out to Subwoofer Amp ACR-1 controls: Line Out to Subwoofer Amp 11:00 High Pass Disable Separate 12:00 12:00 9:00 12:00 Stereo Stereo 11:00 Disable On 12:00 CCW CCW CCW CCW 11:00 11:00 Because We Care LC-4.800 Common Use Case Setting Guideline

Upload: lamnhu

Post on 22-Mar-2018

212 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LC-4.800 Common Use Case Setting Guideline Because · PDF fileOn 12:00 Disable CW Stereo 12:00 9:00 12:00 Sum Disable Low ... and Rear speaker level ... 3-4 to Rear Full Range Speakers

Use Case 5:2 channel line level source (such as a phone)to Front Line Level Inputs1-2 to Front Full Range Speakers (HP @ 80 Hz)3-4 to Rear Full Range Speakers (HP @ 80 Hz)Line Output to Subwoofer Amp ACR-1 controls: Line Out to Subwoofer Amp

CWLow PassDisableSum 12:0012:009:0012:00 StereoStereoCWDisableOn 12:00

11:00High PassDisableSeparate 12:00CCWCCW12:00 StereoMonoCCWDisableOff CCW

CCWHigh PassDisableSeparate 12:00CCWCCW12:00 StereoStereoCCWDisableOff 12:00

11:00Low PassEnableSeparate 12:0012:009:0012:00 MonoStereo11:00DisableOn 12:00

High PassDisableSum 12:0012:00 StereoStereoDisableOff CCW

CCWHigh PassEnableSeparate 12:0012:00 StereoStereoCCWEnableOff CCW

Use Case 7:Factory Head UnitSum Low, Mid and High Signals using Front High, Front, and Rear speaker level inputs1-2 to Front Mid / Tweets (HP @ 300 Hz)3-4 to Front Woofers (LP @ 300 Hz)Line Out to Subwoofer AmpACR-1 controls: Line Out to Subwoofer Amp

Use Case 4:Aftermarket Head UnitLine Level Inputs1-2 Full Range to Front Speakers3-4 Full Range to Rear SpeakersNo SubwooferACR-1 controls: not used in this case

Use Case 6: Aftermarket Head UnitHead Unit Left to Front Left Line Level InputHead Unit Right to Rear Left Line Level Input1-2 Bridged for Front Left Full Range3-4 Bridged for Front Right Full RangeACR-1 controls: not used in this case

Use Case 3: Factory Head UnitSum High and Low Front Signals 1-2 for Front Speakers (HP @ 80 Hz)3-4 for Subwoofer Amp (LP @ 80 Hz)ACR-1 controls: 3-4 output to Subwoofer

Use Case 2:2 channel line level source (such as a phone)to Front Line Level Inputs1-2 to Front Full Range Speakers3-4 to Rear Full Range SpeakersNo SubwooferACR-1 controls: Master Volume

Use Case 1:Factory Head UnitSum High and Low Front Signals1-2 to Front Full Range Speakers (HP @ 80 Hz)3-4 to Rear Full Range Speakers (HP @ 80 Hz)Line Out to Subwoofer AmpACR-1 controls: Line Out to Subwoofer Amp

11:00High PassDisableSeparate 12:0012:009:0012:00 StereoStereo11:00DisableOn 12:00

CCWCCW

CCWCCW11:00 11:00

Because We CareLC-4.800 Common Use Case Setting Guideline