lbx online magazine june 09

Sawmills • Resaws • Edgerscheck out the neWwww.aWMv.com

AWMV... We make machines that make you money.

Profit at any Production level

• IncREaSE yIEldS – up to 50% over scale, reducing raw material needs and transportation costs

• low hoRSEpowER with hIgh output – slashes utility bills

• Rugged construction lowERS maIntEnancE coStS

• Simple, automated systems REducE laboR coStS

• thin-kerf narrow bands REducE coStS, while performing at high levels that may surprise you

©20

09 W

ood-

Miz

er P

rodu

cts,

Inc.

at low or high production levels, awmV offers surprisingly effective solutions. our thin-kerf headrigs and resaws make sense... they make dollars, too.

SEE THE NEW 4250SCH AT AWMV.COM

800.522.5705

Item ID: 11030Contact: MichellePh: 800-315-9950 x606

w/ two conveyorsItem ID: 11600Contact: DarenPh: 800-315-9950 x603

See Prices & Locations at www.LBXonline.com

DealS of the Month

CorDKing 60 Firewood Processor

Cat D5h Crawler/track Dozer

Since 1986 - The Original (800) 315-9950 or (931) 379-0814June 2009


Complete Select Sawmill

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

TRELAN 26-L

800-1000 HP

Whether you are producing Bio Fuel Chips, Paper Chips, Board Chips or just Clearing Land, Trelan® Whole Tree Heavy Industrial Chippers are second-to-none when it comes to the following:

High Chip Production - day in and day out•Unbeatable Chip Quality•Durability and Reliability•Ease of Maintenance•Ease of Portability•Smooth Chipping Action•Extremely Affordable to Operate•Long Knife Life•

Trelan® Whole Tree Chippers have been built for over 35 years. Trelan® Chippers’ durability and longevity is reflected by the fact that 30-year-old units are in the field and continue to operate to this day. When it comes to making money, Trelan® Whole Tree Chippers get the job done affordably for you. These machines are truly the serious Chip Producers Best Friend.

Over

Years

www.trelan.com“Trelan A Name You Can Trust”

800-1000 HP

Dealer Inquiries Welcome!

“Chip Producers Best Friend”

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

4 n June 2009 Visit us online at www.LBXonline.com!

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

For ClassiFieds Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comBANDMILLS & HEADSAWS

2007 SELECT 4221 Band Sawmill (DEMO UNIT) Stationary unit with 115 hp John Deere diesel engine, fully hydraulic system and computerized setworks. Includes live infeed and outfeed decks. Call Serge 866‑724‑76002007 SELECT 3220 Band Sawmill (DEMO UNIT) Portable unit with 38 hp Kohler gas engine, 2” single‑cut blade, hydraulic system, computerized setworks, offloading ramp. Call Serge 866‑724‑76002007 SELECT 4221 Band Sawmill (PRE‑OWNED) Stationary unit with 75 hp electric motor and 10 hp for hydraulic pump, computerized setworks and fully hydraulic system including rollers on tapers. Custom built with separate workstation, 8 ft frame extension for cutting up to 30 ft logs. Additional log turner, dog and backpost on extension. Only used for 6 months. Call Serge 866‑724‑76002004 SELECT 3620 Band Sawmill (PRE‑OWNED) Portable unit with 50 hp John Deere diesel engine, 4” double‑cut blade, fully hydraulic system and computerized setworks, trailer package with brakes on four wheels and 2 5/16” surge coupler. Comes with setwork programmer. Looks like new and only 92 hours usage. Call Serge 866‑724‑76002004 Woodmizer LT70 band mill, Powered by a 62 Turbo Cat diesel, new Accuse +2 automatic setworks, with remote operator station, It is working everyday and has 5200 hours on it. ‑ Item ID‑11288 ‑ Contact Daren at 800‑315‑9950 x6032006 Woodmizer LT‑70 ‑ Stand alone accuset, woodmizer debarker, fully hydraulic, 6’ bed extension (never used) 62hp Cat turbo diesel. 700 hours. Recently reset and gone through by Woodmizer. ‑ Item ID‑11357 ‑ Contact Daren at 800‑315‑9950 x603Bandmill ‑ Bandmill by Miller Manufacturing. Can process a 32” diameter by 20’ long log. Bandmill is powered by a 371 Detroit diesel engine. Includes Frick edger and blower. ‑ Item ID‑10708 ‑ Contact Michelle at 800‑315‑9950 x606Fast Trac Band Sawmill ‑ Sold ‑ Item ID‑11159 ‑ Contact Michelle at 800‑315‑9950 x606Norwood Lumberlite 24 ‑ Portable bandmill sawmill. 2007 year model, very little use. Comes with 23 Woodmizer blades, 6 new rest used once. ‑ Item ID‑11571 ‑ Contact Michelle at 800‑315‑9950 x606Sanborn Mini‑Max Sawmill ‑ 30‑hp 6” bandmill. Stationary, electric 3‑phase. All books included. ‑ Item ID‑11606 ‑ Contact Michelle at 800‑315‑9950 x606Single Head Band Saw ‑ 2 ‑ QUALITY MACHINE band saws for sale!! 20 hp 3 phase motors w/ hydraulic pumps, uses 144” 1.25 blades, can be used in

** INFO LINK **AJD Forest Products ......................17

Amark ............................................13

ANBO Manufacturing ...................25

AWMV.....................................Cover

B & B Mfg. ....................................19

B. H. Payne ....................................35

Baker ..........................................6, 15

Bartlett Saw Service .........................9

Bay Equipment ...............................31

Blockbuster ....................................21

Buck Equipment ............................37

Built-Rite........................................33

Cemar Electro Inc. .........................29

Coleman Sawmill ...........................19

Comtronix ........................................9

Concept Products ...........................39

Cook’s Saw Mfg., Inc. ...................23

Cord Master .....................................8

Corley Mfg .....................................33

Crosby Sawmill ..............................34

CW Mill Equipment .........................4

Enviro Chipper ...............................25

Fernwood Capital & Leasing .........35

James G. Murphy.........................12

L&L Sales ......................................33

L&M Equipment, Canada ................3

Logosol ..........................................37

M&F Gauge ...................................31

Machinery Sales Co., Inc. ..............14

Menominee Saw .............................35

Metal Detectors, Inc. ......................22

Midwest Forest Industry Show ...38

Multitek ..........................................32

Oliver Manufacturing .....................10

Phase-A-Matic ...............................29

Piper’s Saw Shop .......................7, 27

Resource Recovery ........................17

Robert’s Equipment (IME) ............30

Rotochopper ...................................40

Row Electric ...................................39

Sawmill Exchange .........................17

Select Equipment Company ...........25

Select Sawmill ......................... 11, 37

Sering Sawmill ...............................21

Southern Forest EXPO ................38

Surplus Center ................................36

Thomas Industrial ..........................22

Trelan ...............................................2

Truck & Trailer World....................18

Twister Industries .............................9

Universal Refiner ...........................28

US Blades.......................................26

Weaver Electric .............................. 11

West Virginia Mine Tools ..............27

Winston Machinery ........................24

Woodmizer ............................... 11, 16

The Original Lumberman’s

exchange

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

Publisher Woods Publishing

Advertising sAles Morris Woods (800) 315-9950 x 602 [email protected]

design director Heninger & Associates [email protected]

sAles MAnAger Michelle Cappel-Canaday, x606

equiPMent rePs Equipment Representative Daren Bodine, x603

MAiling Address P.O. Box 1916 Columbia, TN 38402-1916 (800) 315-9950 Phone (931) 388-1820 Phone (931) 233-0802 Fax

Ad subMissions May be sent to— [email protected]

shiPPing Address 1002 Oakdale Drive Columbia, TN 38401

PostMAster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submit-ted by advertisers and writers the Lumberman’s Exchange, its principles and associates are not held liable for errors or omis-sions. Reproduction in whole or part prohibited without written consent.

©2009 by Woods Publishing.

** Auctions **James G. murphy — page 12

Bighorn Lumber CompanyTuesday, June 30 • 9 a.m.

Laramie, Wyoming www.murphyauction.com

NOW HIrINg

Knowledgeable equipment sales representative.Call Chris Woods at 800.315.9950 x600

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Ori

ginal

Lum

berm

an’s

Exc

hang

eP

.O. B

ox 1

916

Col

umbi

a, T

N 3

8402

❑ P

leas

e Ad

d ❑

Ple

ase

Chan

ge

❑ P

leas

e Re

mov

e

Com

pany

Nam

e*

Indi

vidu

al N

ame

Add

ress

C

ity

Sta

te

Zip

Pho

ne*C

ompa

ny n

ame

and

addr

ess

requ

ired

to p

roce

ss y

our c

hang

e.

✁


Shaving Mills•Shaving •BaggersWood Pallet •Makers

Call one of ourknowledgeable reps today!!

We are looking for good —

Equi

PMEn

t

Michelle Canaday Phone: 800-315-9950 Ext. 606

Daren Bodine Phone: 800-315-9950 Ext. 603

Hiring New rEP!Phone: 800-315-9950 Ext. 604

Call us today for

all your used

equipment needs!

—Michelle

AuctionCalendarJune 30 (Tuesday)

James G. Murphy

Laramie, Wyoming

July 16 - 17 (Thurs. & Fri.)

Deanco Auction

Philadelphia, MS

NISSAN FORKLIFTS5,000 lb, LPG

Call (800) 548-6914 orsend e-mail: [email protected]

** Calendar **2009 FoReSt PRoduCtS Machinery & equipment eXPoComing June 11 - 13 Morial Convention Center New Orleans

MidweSt FoReSt induStRy Show See page 38 for more information!Coming June 26-27, 2009 Show Me Center Cape Girardeau, Missouri

2009 KentuCKy wood eXPo See page 38 for more information!Coming September 18 & 19, 2009 London/Laurel Optimist Sports Complex London, Kentucky

Cape Girardeau, MO

2009Midwest Forest

Industry ShowDon’t miss this opportunity to see the new-est and most advanced machinery, equip-ment, and technology in the forest prod-ucts industry. Pre-show activity includes a industry tour of 3 mills June 25.

For attendee or exhibitor information contact the show sponsor, Missouri Forest Products Association 573-634-3252 or visit www.moforest.orgShow Me Center

June 26-278am-4pm

-may-


Item ID: 11641Contact: DarenPh: 800-315-9950 x603

'93 freightliner flD 12064St

2007 Salsco 30 Shaving Mill


BroN 400 Mulching Machine

See Photos online at

www.LBXonline.com

Featuring the Latest Technology & Services for: Sawmill, Pallet, Logging, & Secondary Equipment, Loaders, Chain saws, Trucks, Parts Safety Clothing, Accessories, New & Used Equipment, and Much More!

Free Drawings for Door Prizes—Family Friendly—Educational Exhibits—Tickets- Adults $3 ($5 at gate); Kids- $2 under six is free—Free Parking

Events: Live Demonstrations of Machinery & Equipment– Inside & Outside Exhibits Lumberjack Contests Chain Saw Carving Skidder & Knuckleboom Contests Continuing Education for Loggers Live Bluegrass & Country Music and much more.

For More Information On Exhibiting or Attending:

Kentucky Forest Industries Association 106 Progress Drive Frankfort, KY 40601 Tel: 502/695-3979 Fax: 502/695-8343 www.kfia.org

September 18 & 19, 2009

London, KY


www.piperssawshop.com

25’ Deck Trailerw/ Dove TailItem ID: 11676Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

1992 C-2000 grinderw/150kw Kohler Power Pack Item ID: 11531Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1980 540B grapple SkidderItem ID: 11568Contact: DarenPh: 800-315-9950 x603www.LBXonline.com

Price reduced

single form or joined together, good shape great for low production, ‑ Item ID‑10535 ‑ Contact Michelle at 800‑315‑9950 x606Timber Harvester 36HTE Band Sawmill ‑ Purchased new in Oct. of 2005 for $41690.00 It has the following extra features 1. Hydraulic power rolls‑ for exiting large cants/timbers 2. 30 HP Electric three phase motor 3. Large roller guide assembly 4. 3rd log post 5. Dual chain drive assembly 6. Electric

Set works 7. Dragback guide assembly 8. 4’ bed extension Saw is capable of sawing up to 22’ long We were sawing 5‑6 MBF per day when we took it out of production. Everything is in working condition. Ran indoors forless than 8 months. Replaced with a larger saw. ‑ Item ID‑10489 ‑ Contact Michelle at 800‑315‑9950 x606Woodland K‑4 Sawmill with Edger ‑ Woodland K‑4 sawmill with attached edger. Please call for further information. ‑ Item ID‑11461 ‑ Contact Michelle at 800‑315‑9950 x606Woodmizer LT‑70 ‑ Portable, 500 hours. 62‑hp Cat diesel. Includes debarker, portable operator station, heavy‑duty trailer package, Acu‑set

works. Also includes 70 blades, power pick‑up strip, main control board and communication board. ‑ Item ID‑10827 ‑ Contact Michelle at 800‑315‑9950 x606Woodmizer LT‑70 Bandmill ‑ 2007 year model with only 820 hours. Completely hydraulic. ‑ Item ID‑11501 ‑ Contact Michelle at 800‑315‑9950 x606Woodmizer LT40 Hydraulic ‑ Less than 1,000 hours, 750 hr service performed by Woodmizer tech. This machine has: debarker, hydraulic log loader, hydraulic log turner and positioner, Woodmizer blade lube system and is powered by a 28 hp Kohler gasoline engine. It comes with approx. 30 blades (approx. $700 value) ‑ Item ID‑11594 ‑ Contact Michelle at 800‑315‑

9950 x606BLOWERS

Blowers ‑ 2 blowers, one is 20” ‑ Item ID‑10899 ‑ Contact Michelle at 800‑315‑9950 x606Chicago Blower ‑ Siemens 75‑hp motor, Series 30GI blower. 1775 RPM. ‑ Item ID‑10820 ‑ Contact Michelle at 800‑315‑9950 x606Koger Blower ‑ 75‑hp, 54”x16” fan, 18” inlet and 18” outlet ‑ Item ID‑10849 ‑ Contact Michelle at 800‑315‑9950 x606

CARRIAGES & DRIVESSalem 3‑Head Block Carriage ‑ Left handed. Needs a little work or is good for parts. ‑ Item ID‑11386 ‑ Contact Michelle at 800‑315‑9950 x606

Highest Production

Lowest Maintenance

Guaranteed!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 RogeRs Road,

PeRth ,

ontaR io K7h 1P9

Canada

www.cord-master.comEmail : [email protected]

NewGrappleSyStemNow Available!

Today!888-219-9663


Wrap Your Firewood… Increase Your Profits!

Twister Industries1 (877) 433-9620

TWiSTer ProducTS:Hornet Processors • Bundle Wrappers

Resplitters • Skid steer SplittersWood Splitters • Conveyors

Phone/Fax: (320) 679-9835 Cell: (612) 390-9620

2266 Hwy. 65 • Mora, MN 55051www.twister-industries.com

[email protected]

• Sell Bundled Firewood to Convenience Stores, Campgrounds, and State Parks

• Seven Bundle Sizes Available: Electric or Gas

• Wrap a Cord of Bundles Per Hour• Priced Under $1,700

Logging equiPmenT oPeraTorS

Salem 4‑headblock Carriage ‑ Left handed ‑ Item ID‑10846 ‑ Contact Michelle at 800‑315‑9950 x606

CHIP BINSPeerless Style 30 Bin Unit ‑ Approximately 2 truck load bin with hydraulic operated clam shell style door for loading open top trailers. New replacement cost approx. $67,000. ‑ Item ID‑11638 ‑ Contact Michelle at 800‑315‑9950 x606

CHIP SCREENSMorbark Chip Screener ‑ 6x6 chip screener with 5‑hp fine sawdust blower and 10‑hp chip blower with pipes. All Hydraulic. Good condition. ‑ Item ID‑10766 ‑ Contact Michelle at 800‑315‑9950 x606

CHIPPERS48” Precision Chip Pak ‑ Reconditioned, new 100‑hp motor, chip blower, cyclone, 5x5 screen with new screens 1‑3/4” & 3/4”, 6 knife with 3 blocked off, 20‑hp on blower, new bearings, new belts, new sheaves. Price includes loading on truck. ‑ Item ID‑11586 ‑ Contact Michelle at 800‑315‑9950 x60672” Fulghum 8 Knife Chipper ‑ with a 250 hp motor, $7500. ‑ Item ID‑10478 ‑ Contact Michelle at 800‑315‑9950 x606Fulghum Chipper ‑ 48” chipper with100‑hp motor ‑ Item ID‑10648 ‑ Contact Michelle at 800‑315‑9950 x606Morbark Chip Pak ‑ 1995 model 58” 3‑knife chipper with large infeed spout, 125 HP electric motor, cyclone, shaker screen, 40 HP chip blower with y‑valve pipe. ‑ Item ID‑11637 ‑ Contact Michelle

at 800‑315‑9950 x606Morbark Model 23 Chipper ‑ 1997 Year model, rebuilt Cat 3412, 2000 hours. Cab only, no loader. ‑ Item ID‑11029 ‑ Contact Michelle at 800‑315‑9950 x606Precision 48 Chipper & Shaker ‑ Fines blower and dual trailer shoot. 125‑hp electric motor and 36’ vibrating conveyor. ‑ Item ID‑11667 ‑ Contact Michelle at 800‑315‑9950 x606Precision Chip Pak ‑ 48” chip pack with 6 knife disk, operating as a 3 knife.

Condition appears to be excellent. Includes 100 HP electric motor, 5x5 chip screen, cyclone and pipe from chipper, fines blower. ‑ Item ID‑11636 ‑ Contact Michelle at 800‑315‑9950 x606Salsco Wood Chipper ‑ 1996 year model; 12”x18” hopper; 102‑hp Perkins Turbo Diesel engine with 375 hours; hydrostatic feed; one owner. ‑ Item ID‑10613 ‑ Contact Michelle at 800‑315‑9950 x606Trelan DL18 Whole Tree Chipper ‑

Powered by a 475‑hp Cat diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300‑hp to 425‑hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel‑wood. Is ready to go, needs

Oliver • (719) 254-7813 • Fax. (719) 254-6371 Web: www.olivermfgco.com • E-mail: [email protected] • PO Box 512 • Rocky Ford, CO 81067 USA

SEPARATING IS THE SOLUTION!

SEPARATING IS THE SOLUTION!

SEPARATING SOLUTION!

Is The

Maxi-Cap destoner

Maxi-Cap® Separator & destoner • Hi-Cap® Gravity & destoner • Fluid Bed Dryer • SIZE RIGHT®

Mulch

• Oliver has been in the processing industry for over 75 years• Continuously updated and engineered with new technology• Fully Customized

• All models now available with easy adjustable electronic feature• Energy Efficient• FREE Product Testing!

Oliver destoner in use separating stones and metal fragments.

WoodPellets

Example of stones and metal fragments separated using Oliver destoner.

The Oliver destoner removes rocks and metal fragments from your

processed wood, mulch or wood pellets

FOR SAFETYRemove Stones Or Metal

Fragments That Cause Sparks Or Possible Explosions

FOR LONGEVITY Prevent Premature Wear

And Damage On Your-Processing Equipment,

Saw Blades, Pellet Equipment & Wood Chipper

FOR QUALITY Separate And Remove Heavy Contaminants From Chipped

Wood & Sawdust. Contaminants Include Stones, Sand, Grit, Bolts

& Metal Fragments

Wood Chips

Logs

Saw Dust


VFD Control

All SizeS oF MotorS

MAnuAl trAnSFer

SwitCh

Motor Control StArterS(Solid State)

DiSConneCtSwitCh

AutoMAtiCreDuCeD VoltAge

StArter

CoMbinAtionStArter

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BESt Price!

YOU NEEd WEAvER ELECtRIC

Call TodaY!toll Free 800-257-0038

Ph: 303-288-0746 • Fax: 303-288-02186591 N. Washington, Denver, CO 80229

Web: www.weaverelec.comEmail: [email protected]

DESCRIPTIONThickness X Width

PART NUMBERBox Series

HOOK ANGLE TOOTH SPACING5/8” 7/8” 11/8”

1.25” x .042 Bs275

1.5” x .045 Bs376

1.25” x .045 Bs375

x10

x

x

7, 10

7

Your Leader in Blade Technology.











Your Leader in Blade Technology.800.522.5760www.SawFaster.com

*Stellite is a registered trademark of Deloro Stellite Holdings Corporation. Ussed with permission.

Profile view of the RazorTip blade showing the set of the blade.

NARROW BAND BLADES

Using Stellite® Tipped Technology

Using Stellite® Tipped Technology

NARROW BAND BLADES

TOUGHHIGH TECH - Stellite® tipped technology that keeps an edge long after other blades dull

RESHARPEN - Easy to resharpen and set with conventional sharpening equipment or Wood-Mizer’s Resharp service.

QUALITY - Each tooth is set and profile ground to exact specifications that ensure long life and quality cut

One word sums up the NEW Wood-Mizer RazorTip blade...

The stellite tipped RazorTip blade is ideal for sawing abrasive, kiln-dried, tropical, specialty, and other tough wood and beams.

NEW!

no work. Was manufactured in the mid 80’s. ‑ Item ID‑11292 ‑ Contact Michelle at 800‑315‑9950 x606

COMPLETE SAWMILLS2005 Timberharvester Sawmill ‑ Purchased new in December 2005, has 1550 hours, powered by a 47‑hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run inside. ‑ Item ID‑11584 ‑ Contact Michelle at 800‑315‑9950 x60656” Circular Sawmill ‑ Runs 8’ to 28’

long saws up to 36” wide. Is PTO powered, currently running off 80‑hp tractor. ‑ Item ID‑10802 ‑ Contact Michelle at 800‑315‑9950 x606Complete Circle Mill/top saw/resaw/edger/all transfers ‑ Complete sawmill helle carriage with top‑saw; infeed deck; edger; McDonough resaw; Cat Gen‑set; all transfer equipment. Circle saws and related equipment. All electrical switches included in sale. Buyer is responsible for removal. ‑ Item ID‑11656 ‑ Contact‑Daren Bodine

‑ Phone‑ 800‑315‑9950 Ext‑ 603Complete Plywood Mill ‑ This mill was set up in 2005 Brand New for a cost more than $9,500,000.00! It has only 336 hours. Includes 1‑Fezer MAS Blockboard core composer, 1‑Fezer FM 30 Lumber slicer, 1‑Fezer 2 PSB 3.6 Press dryer, 1‑Fezer F34 T+T Splicing machine, 1‑Fezer GRC ‑ 370 Veneer jointing guillotine with auto gluing, 1‑Fezer knife grinder, 1‑Fezer plywood press, 1‑Fezer Rosser head debarker, 1‑FEzer Step feeder, 1‑Fezer Geometric centering lathe charger, 1‑Fezer Veneer

lathe, 1‑Fezer conveyor, 1‑Fezer Rotary clipper, 1‑Fezer Pneumatic clipper, 1‑Fezer Drum chipper, 1‑Fezer Core Conveyor, 1‑Fezer metal detector, 1‑Fezer Veneer Roller, 1‑Fezer Feeder and other miscellaneous gluers, saws, loaders, patchers and knives. ‑ Item ID‑10797 ‑ Contact Michelle at 800‑315‑9950 x606Complete Select Sawmill ‑ 6” double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hours. Comes with 48 extra blades worth $10,000.00. Also includes


Pub

lic A

ucti

onNO MINIMUM STARTING BIDS - NO ITEMS WITH RESERVE PRICES

BIGHORN LUMBER COMPANY9am - Tuesday - June 30Preview 8am to 4pm, Monday, June 29

1100 S Pine, Laramie, WYCambio Debarker; Barko Pedestal Log Loader; LogDecks & Hauls; Cutoff Saw; Metal Detector; Sa-lem 5ʼ Canted Headrig; Salem Carriage; Ukiah,Schurman Edgers; McDonough 5ʼ Twin VerticalResaw; Hemco Sorter; Hog; (2)Chippers; (2)Trim-mers; Chip Screen; (2)Yates American Planers;Compressors; Kilns; Filing/Grinding Room Equip-ment; Shop Equipment & Tools; LeTourneau 2594Log Stacker; John Deere 744H Log Loader;(2)Taylor Forklifts; (2)Cat Forklifts; Eaves, NissanForklifts; John Deere 772 Grader; Case 480LLLoader; Water & Dump Trucks; Tractor; More

10% BUYERS PREMIUMCALL FOR AN ILLUSTRATED BROCHUREJames G. Murphy IncJames G. Murphy IncJames G. Murphy IncJames G. Murphy IncJames G. Murphy Inc

AuctioneersAuctioneersAuctioneersAuctioneersAuctioneers425-486-1246 • 503-463-4444

Toll Free 1 800-426-3008www.murphyauction.com

WA Auctioneers License #1960


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!➨

1995 Franklin 4000 w/rotosawItem ID: 11669Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Price reduced

2005 Built-rite 18 SCPDItem ID: 11526Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2006 Blockbuster 15x20Item ID: 11663Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

a debarker with 840 hours. Both purchased new by current owner. Price new without the extra blades is $160,000 ‑ Item ID‑10782 ‑ Contact Michelle at 800‑315‑9950 x606Hurdle Portable Sawmill ‑ Includes 2 strand 20 foot live deck, 2 strand 22 foot heavy duty green chain, auto slab pitcher, Patz conveyor, 350KW Gen set, 3 saw vertical edger and 2 saw Miner Edger, electric and controls enclosed in a 40’ drop deck trailer with canopy. 1989 year model. One owner system. ‑ Item ID‑10718 ‑ Contact Michelle at 800‑315‑9950 x606Jackson Harvester Sawmill ‑ 3 headblock carriage, 2 saw vertical edger, Mudata setworks, log turner, sawcab, almost new feedworks!!!! 2 strand live deck, Husk, newer sawcab outfeed belt. Can be bought as package or individual pieces! Can be seen running. ‑ Item ID‑11313 ‑ Contact Daren at 800‑315‑9950 x603Meadows #2 Sawmill ‑ Meadows #2 carriage ‑ 15’ OAL with 4 headblocks ‑ 3 hydraulic dogs ‑ 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk ‑ clock face lumber dial ‑ controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40‑hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. ‑ Item ID‑11086 ‑ Contact Michelle at 800‑315‑9950 x606

CONVEYORS

Nation's #1 largest source for used & refurb. conveyors. Over 3 miles of power & gravity conveyors stocked. Buy pre‑owned conveyors priced 30‑80% less than new. Mention this ad and save. Nationwide Sales. 800‑598‑5532 | www.sjf.com ‑Kent16’ Conveyor ‑ 10” rolls, 32”X16’. Adjustable legs. ‑ Item ID‑11237 ‑ Contact Michelle at 800‑315‑9950 x60617’ Conveyor ‑ 6” rolls. 41”X17’ long. Adjustable legs. ‑ Item ID‑11238 ‑ Contact Michelle at 800‑315‑9950 x60620’ Conveyor ‑ 18” x 20’ long ‑ Item ID‑11236 ‑ Contact Michelle at 800‑315‑9950 x606

32’ Conveyor ‑ Conveyor on wheels. Has new belt. Photos coming soon. ‑ Item ID‑11465 ‑ Contact Michelle at 800‑315‑9950 x60660’ Conveyor ‑ 60’ Ladderback chain conveyor. 18” wide. ‑ Item ID‑10728 ‑ Contact Michelle at 800‑315‑9950 x606CMC Belt Conveyor ‑ 20’X36” with electric drive and motor ‑ Item ID‑10710 ‑ Contact Michelle at 800‑315‑9950 x606Concave Belt Conveyor ‑ 30” wide x 90 ‘ long belt conveyor. Belt runs on troughing idler rolls. Very nice condition. Includes cat walk. ‑ Item ID‑11639 ‑ Contact Michelle at 800‑315‑

9950 x606Hurst Conveyor ‑ Heavy duty material handling conveyor. Manufactured in 1994. Catwalk. Cleated 4’ wide belt. 100’ overall length. ‑ Item ID‑10821 ‑ Contact Michelle at 800‑315‑9950 x606

DEBARKERSMellott Debarker with 648 Rosser Head ‑ Late 90’s year model, either 1997 or 1998. 20’ 3 strand log deck stop and load with Mellot 40’ log trough. Dual kickers and Cornell barn sweep. ‑ Item ID‑11668 ‑ Contact Michelle at 800‑315‑9950 x606Mellott Rosserhead Debarker ‑

Bandmills & HeadrigsSalem 6’ Air Strain BandmillKockums 6’ QuadMaxi Mill with 6’ QuadSalem 7’ RH BandmillPSS Circle Scragg & EdgerSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

Carriages & drivesTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block Linear

CarriageSalem 42” 4-Block Carriage

CHippers & sCreensPrecision 66" Horizontal F.BM&M Chip ClassifierPrecision 118” HFBD ChipperBlack Clawson 8’ X 12’Precision 96” Whole LogPrecision 48” Horizontal F.B.C. 6140 Slant DiscCM&E 36” RechipperMorbark 75” HFBD Chippers

deBarkersNicholson 35" A-5 DebarkerNicholson 35" A-2 DebarkerNicholson 22” A-5 DebarkerNicholson 44” A-2 Debarker

edgers & gangsSchurman Late 4” x 36” ShiftingTMT Chipping EdgerSchurman 6TA48 CombinationUkiah 6” x 48” Gang EdgerSchurman 12” Double Arbor GangFiling room equipmentGockel Mag Bed GrinderIseli Bandsaw LevelerWright W-1600 Auto TipperWright W-150 MSM Top & FaceArmstrong No. 90 EqualizerArmstrong Dual Side GrinderTalon TW-1Talon DS-1Armstrong Side ProNewman G-20 Rotary Armstrong No. 4 RH B.S. Grinder

9802 N. Vancouver Way • Portland, OR 97217When Calling Ask for Dept LX • [email protected]

Ph: 503-285-6691 • Fax: 503-285-0449

World’s Largest InventoryNeW & Used saWmILL & PLaNINg mILL eqUIPmeNt

misCellaneous(1) 120-Unit Peerless Bin(2) 24-Unit Peerless Bins (1) 30-Unit Peerless Bin Mereen-Johnson 48” Ripsaw

Sullair V-200TS CompressorSullair V-200S CompressorMereen-Johnson 212 Dip Chain5-Arm Hyd. Tilt HoistSticker Recovery SystemIrvington Planer Trimmers

planers & mouldersWadkin 6-Head MoulderYates A-20 10-KnifeWeinig U22A, 6-headWadkin 7-Head MoulderNewman M-990H 20-KnifeNewman 382 Double Surfacer

www.mach inerysales .com

S-R 6-14-D1 15”, 16-KnifeIida High-Speed MoulderNewman M712 12-KnifeS-R 6-10-A1 10-KnifeYates A-20-12, 15", 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-HeadTri-State 6-Roll 6-Head

resaws McDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air StrainMcDonough 62” Linebar Resaw

over 13 acres of Great Buys on used equipment!CheCk Partial listing Call toll free:

866-241-2977 ask for DePt. lXFor complete equipment list visit our website:

Lamb Hammer Hog

Precision 66" Chipper

salem 6' air strain

Armstrong No. 25 CircleHanchett DN-40 Knife GrinderHanchett AK-192 Mag. K. GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

Hogs & pulverizersSchutte 1390 Hammer MillPrater Hammer MillJacobson Hammer MillWilliams Rocket Hammer MillMontgomery 18HD40 Horiz. HogW. Salem 52” Horizontal GrinderJeffrey 56 WB Hammer HogLamb HX 750 Hammer Hog Kimwood Rotary HogGlobe Veneer HogJeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

Woods Planers 412M, 414M, 407M, 409MWoods Moulder 132M

Yates Planers A-20, A-62, A-66Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

We are parTiNG ouT


BAKER SAWMILL SYSTEMS

Upgrade Your Idea To Reality.

Baker Makes It Easy.

(800) 548-6914 www.logtolumber.comPO Box 128 • Ellington • Missouri • 63638 • U.S.A. • E-mail: [email protected] • Fax: (573) 663-2787 • Phone: (573) 663-7711

Log Infeed Decks

Cant Hooks

Band Blades

Portable and Stationary Band Sawmills

Dead Rollers andother material handling

equipment

Portable and StationaryCircle Board Edgers

Boost the capabilities of one man. Imagine having the production power of a whole Baker Sawmill System right on site, all run by just one man! Saw logs up to 36 inches in diameter into precision-cut ties

and boards. Now make this idea a reality. Contact Baker Products today for all the details.

HIGHEST PRODUCTION AND

ACCU

RACY

THE WORLD’S FINEST WOODWORKING

EQU

IPMENT

WORLD’S #1 SELLING

BAN D R E S A WS

Midwest Forest Industry Showat the Show Me Center in Cape Girardeau, Missouri

June 26 and 27, 2009Outdoor exhibits 824, 825,

834, and 835

1995 Hydro- Ax 411EItem ID: 11673Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘97 Blockbuster B1 ProcessorItem ID: 11512Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

reconditioned 1990 model 200 rosserhead debarker for debarking logs from 6” to 36” in diameter and up to 20’ in length. Features heavy duty log rotation shafts 2‑15/16” in diameter with 6 sets of bull wheels 24” in diameter. Also features 25 HP electric motor powering debarking head; vertical carriage track to eliminate log hangs ups; variable speed log rotation, variable speed head traverse; 15 HP hydraulic pump with extra capacity to operate an auxillary log deck; and 12” diameter cutterhead with carbide replaceable teeth; operator’s platform, console and controls; barn sweep style bark conveyor. ‑ Item ID‑11621 ‑ Contact Michelle at 800‑315‑9950 x606PHL MFG Debarker ‑ Rosser head debarker. Needs a little work but all components are included. Also includes cab. ‑ Item ID‑10713 ‑ Contact Michelle at 800‑315‑9950 x606

EDGERS & GANGS6” Edger ‑ Edminston hydraulic edger. Early 2000 year model with electric motor. Has a 40‑hp, 60 hz. ‑ Item ID‑10864 ‑ Contact Michelle at 800‑315‑9950 x606Cook Edger ‑ 5” x 36” 2‑saw board edger with infeed table and hand wheel saw shifting. Feed rolls are in good condition and saws are mounted

in ball bearing collars so blades are shifted by the collar for increased saw accuracy. Feed rolls are powered from arbor, arbor power available ‑ Item ID‑11622 ‑ Contact Michelle at 800‑315‑9950 x606Cornell 7x48 Edger ‑ Heavy duty, single entry edger with 2 moveable saws, infeed table, lasers, dual belt tailer; 75 HP arbor motor; two speed feed; powered press rolls; electric shift. Plenty of arbor space for additional fixed blades. Cuts up to 7” thick. Access door on left side. ‑ Item ID‑11632 ‑ Contact Michelle at 800‑315‑9950 x606Frick 8X48 Edger Combination ‑ 25 blades 12 ft in feed 26 out feed hyd power. 100 Edger hydraulic power pack. ‑ Item ID‑11671 ‑ Contact Michelle at 800‑315‑9950 x606HP‑14 Edger ‑ (2) 14î Sawblades, 2‑1/2î x 12‑1/2î board Cap. 31 HP Kohler engine, trailer package. Also have (3) units available without power or trailer package for $4,500 each. Price $6,750 ‑ Item ID‑10791 ‑ Contact Michelle at 800‑315‑9950 x606Meadows Deluxe Edger ‑ 4”x36”. Very little use, in very good condition. Has a pulley system to run it. 3 interchangeable blades. ‑ Item ID‑10900 ‑ Contact Michelle at 800‑315‑9950 x606

Miner 2‑Saw Edger ‑ with infeed & outfeed ‑ Item ID‑10654 ‑ Contact Michelle at 800‑315‑9950 x606“Miner Edger ‑ 40 HP Electric motor, , 4î x 32î capacity, up to (4) blades, 7í Infeed, 8í outfeed ‑ Item ID‑10789 ‑ Contact Michelle at 800‑315‑9950 x606Morgan Bull Edger ‑ 2000 year model, powered by a 150‑hp diesel engine. 26” saws. Capable of 9”x36”. Is like new, has Photos coming soon. ‑ Item ID‑10809 ‑ Contact Michelle at 800‑315‑

9950 x606Morgan Edger ‑ Gas engine. ‑ Item ID‑10830 ‑ Contact Michelle at 800‑315‑9950 x606Pendu “Jr” Double Arbor Gang ‑ 1997 Model E2000 gang with two 50 HP arbor motors; all controls; separate blower. 480 volt. Capacity 6” H x 8” W. ‑ Item ID‑11628 ‑ Contact Michelle at 800‑315‑9950 x606Salem 3‑Saw Edger ‑ 60‑hp motor, 4” X 48” capacity, 9’ infeed table, 17’ long

Cape Girardeau, MO

2009Midwest Forest

Industry ShowDon’t miss this opportunity to see the new-est and most advanced machinery, equip-ment, and technology in the forest prod-ucts industry. Pre-show activity includes a industry tour of 3 mills June 25.

For attendee or exhibitor information contact the show sponsor, Missouri Forest Products Association 573-634-3252 or visit www.moforest.orgShow Me Center

June 26-278am-4pm


FIRST TIME EVER...

BUILD YOUR OWN SAWMILL

GET AN ESTIMATE INSTANTLY!

NEW ONLINE TOOL FOR BUILDING A

SAWMILL!

www.MyWoodmizer.com

TRY IT TODAY!

picker outfeed table, hydraulic blade shift. 1990 model ‑ Item ID‑10852 ‑ Contact Michelle at 800‑315‑9950 x606Tierney Gang‑Edger Combo ‑ 8 x 60 combination gang edger with infeed, outfeed, 300 HP electric motor. Belt tailer on edger side (left); live rolls on gang side; access door on gang side. Features shifting gang cluster with programable hydraulic setworks; 2 saw hand lever shifted edger; shifting lasers; numerous spacers; 24” dia. Carbide tipped strobe saws; pop up

transfer chains; powered top press rolls on gang side ‑ Item ID‑11623 ‑ Contact Michelle at 800‑315‑9950 x606Timberking Talon 900 Edger ‑ Powered by 220 volt, 3 phase electric, 15‑hp motor. Has a 21” opening. Been used and stored inside a warehouse and never exposed to the elements. ‑ Item ID‑11560 ‑ Contact Michelle at 800‑315‑9950 x606


www.LBXonline.com

ELECTRICAL COMPONENTSSquare D 150‑hp Solid State Motor Starter ‑ Class 8660 electronic softstart for motors up to 150 HP. Includes 400 AMP breaker and enclosure with push buttons on the door. ‑ Item ID‑11631 ‑ Contact Michelle at 800‑315‑9950 x606Square D Starter ‑ Size 6 Autotransformer Starter with 700 amp breaker. ‑ Item ID‑11630 ‑ Contact Michelle at 800‑315‑9950 x606Yaskawa 200‑hp Soft Start ‑ Solid state softstart device to gradually bring

electric motor up to speed. This device is mounted in a heated and cooled, water tight enclosure with a 400 amp motor circuit protection type breaker. ‑ Item ID‑11629 ‑ Contact Michelle at 800‑315‑9950 x606

FIREWOOD PROCESSORS'05 BUILT‑RITE 18 SCPD, less than 500 hrs, log deck, one owner machine and he is the only one to ever operate this machine. 33.5 hp Kabota diesel engine ‑ Item ID‑11526 ‑ Contact Daren at 800‑315‑9950 x6031997 Blockbuster B1 Firewood Processor, w/ 30’ HD elevator, 1304 hrs, 81hp perkins diesel engine, 3 splitter heads 4,6,& 8 wedges, oil changed every 100 hrs, live deck, 1 owner machine and he has been the only one to operate this machine, Owner is getting out of the business. ‑ Item ID‑11512 ‑ Contact Daren at 800‑315‑9950 x6032005 model 50 SCP processor ‑ 2005 model 50 SCP processor. Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel ‑ Item ID‑11619 ‑ Contact Daren at 800‑315‑9950 x6032006 Blockbuster 15x20 ‑ Blockbuster firewood processor; 1200 hours; 30’ discharge conveyor’ live deck’ 6 and 8 way wedge; powered by a Kubota 33‑hp diesel engine. This machine has been well maintained; including an oil change every 100 hours. ‑ Item ID‑11663 ‑ Contact Michelle at 800‑315‑9950 x6062008 Wood Beaver Hakki 1x37 Firewood Processor ‑ 2008 year model, powered by a 24‑hp Honda gas engine. Includes a log deck. Less than 100 hours. ‑ Item ID‑11659 ‑ Contact Michelle at 800‑315‑9950 x606Built‑rite 40 SCP Firewood Processor ‑ Powered by a 46HP Kubota Diesel coupled to a triple hyd. pump, this firewood splitter can produce up to 2‑1/2 full cords per hour. Standard on the 40 SCP Firewood Processor: 40 Gal hyd. tank 17 Gal fuel tank Automatic bar oiler 25” Titanium bar / .404 chain 6 Sec. cycle time on firewood splitter Hydraulic brakes 3 Strand live deck Triple Pump Options for the 40 SCP Firewood Processor: Auto stop system for exact wood length 30” Cylinder for splitting 12”‑26” wood Auto splitter 24’ Conveyor ‑ Item ID‑11616 ‑ Contact Daren at 800‑315‑9950 x603CordKing 60 firewood processor w/2 conveyors ‑ 1999 CordKing 60 firewood processor w/2 conveyors, the carbide circular saw blade can cut approximately 1500 full Cords of firewood before a 20 minute sharpening is required! Electric brakes, Superior Carbide Slasher ‑ Cut wood instead of sharpen chains 36” to 60” diameter, 4 ga Carbide Slasher Hydraulics: Commercial Shearing Splitter: 29‑72 tons, 3‑4 second cycle time, 2, 4, 6, 8, 10 or 12 way split Capacity 4” to 27” Log dia. 0” to 48” block length Infeed Conveyor: 16” ‑ 30” long hydraulic powered Clean out Hopper: Get rid of bark and wood slivers before being conveyed away. between 2500‑2600 hrs, 85hp John


SawmillExchange14V 7/11/05 1:34 PM Page 1

AvAIlAble NoWWood-Mizer

LT300

with Cab and Infeed Deck

over 800 LIsTINgs! Band or Circular Sawmills, Portable or Stationary, Manual or Auto, Hobbyist to Professional Models.

Plus, the Support Equipment to “Make Your Dream Mill a Reality.” Like Resaws, Edgers, Planers, Dry Kilns, Chippers, Loaders, Firewood Processors and More!

AJd Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500Email: [email protected] • Web: www.ajdforestproducts.com

Dry Kilns • 2 sawmills • 25,000,000 BF annual ProDuctionDeere ‑ Item ID‑11600 ‑ Contact Daren at 800‑315‑9950 x603Normac Firewood Processor ‑ Powered by an Isuzu 55‑hp diesel engine; 8‑way splitter wedge; 30’ stacking conveyor; extra bars & chains. Works well, but needs a new battery and starter. Start switch can be bypassed to operate now. Mid to late 80’s machine. Processes 1 to 1‑1/2 cords per hour. ‑ Item ID‑11083 ‑ Contact Michelle at 800‑315‑9950 x606Shop‑Built Firewood Processor ‑ Shop built firewood processor takes logs 18” x 22’. Has 6‑way wedge. ‑ Item ID‑11680 ‑ Contact Daren at 800‑315‑9950 x603Simplex Chomper 14 ‑ Powered by an 18‑hp Honda gas engine. Is a year

model 2002 with 200 hours. Is in very good to excellent condition. ‑ Item ID‑11413 ‑ Contact Michelle at 800‑315‑9950 x606Wood Beaver 1X47 ‑ 1 year old machine with less than 900 hours. 12 way wedge, stationary unit with electric motor. ‑ Item ID‑11481 ‑ Contact Michelle at 800‑315‑9950 x606

FORKLIFTS4500 Masse Ferguson Forklift ‑ Powered by a 3‑cylinder Perkins diesel engine (completely rebuilt). Almost new tires, 4’ forks, lift is 10’ high and has a 2 stage mast. Is hydro‑static. ‑ Item ID‑10768 ‑ Contact Michelle at 800‑315‑9950 x606Case 586C Forklift ‑ Forklift with good

rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4‑cylinder. ‑ Item ID‑11457 ‑ Contact Michelle at 800‑315‑9950 x6061987 Hyster 25,000# forklift ‑ 8’ forks; new Perkins diesel engine; dual front wheels; 25,000#; side shift; heat in cab. Runs great. ‑ Item ID‑11672 ‑ Contact Michelle at 800‑315‑9950 x606

GENERATORS75KW Diesel Turbo Generator ‑ 770 hrs on it. w/ a hercules Deisel Engine & right now it’s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! ‑ Item ID‑10491 ‑ Contact Michelle at 800‑315‑9950 x606Yanmar KDG 5500 Watt Diesel

Generator ‑ 5500 Watt generator with 178FE direct injection, (2) 110 outlets, (1) 240 outlet, elecgtric and pull start, low oil shutdown, remote controls start, low hours. ‑ Item ID‑11364 ‑ Contact Daren at 800‑315‑9950 x603Yanmar KDG 7500 Watt Diesel Generator ‑ 186FE direct injection, electric and pull start, low oil shutdown, (2) 110 and 240 outlets. Also has remote control start and low hours. ‑ Item ID‑11365 ‑ Contact Daren at 800‑315‑9950 x603

HAMMER MILLJacobson Hammermill ‑ 32” wide x 48” diameter rotor. Model 4832D. High volume hammermill set up for direct motor drive. Features 72 reversible


cash in now!Cost effective Production is the Key to Firewood Profitsthe woodBine Line-up Gives you Affordable Production!

Firewood is hot! Low Grade LoGs

are not!

Distributed by:

Truck & Trailer World(508) 478-5902

Email:[email protected]

Live deck with hyd. drive

Simple Controls for Fast easy operation

heavy duty hour Glass Roller

your Choice of 4, 6, or 8 way headPowerful hyd.

Chain Saw

uLtiMAte

StAndARd

woodBine JR.

the Professional’s Choice!

your Choice of Stationary or Portable

For Personal, hobbyist & Small Business

Five ModeLS to Fit youR oPeRAtion Simple design and standard AMERICAN MADE parts makes operation and

maintenance a breeze!

swinging hammers, 3/16” round hole screen, and magnetic metal trap on infeed. Needs 200 to 300 HP electric motor, 1800 rpm. ‑ Item ID‑11627 ‑ Contact Michelle at 800‑315‑9950 x606Montgomery Blo‑Hog ‑ model 26 with integral blower and 125 HP electric motor. Top feed opening approximately 14” x 26”. Built in blower with top discharge. Excellent condition ‑ rebuilt shortly before taken from service ‑ Item ID‑11626 ‑ Contact Michelle at 800‑315‑9950 x606Schutte Horizontal Hammermill ‑ model 80 HZF with 24” wide infeed opening, 2 fly wheels, 125 HP direct

drive electric motor, and rear discharge duct. Also includes vibrating infeed conveyor. ‑ Item ID‑11624 ‑ Contact Michelle at 800‑315‑9950 x606West Salen Machinery ‑ fixed hammer hog, 24”x25” top feed opening, bottom discharge with air duct, features 1 1/2” screen, 125hp, 3phase 460v, direct drive motor and sub frame ‑ Item ID‑11625 ‑ Contact Michelle at 800‑315‑9950 x606

KNIFE GRINDERSHanchett Band Sharpener ‑ Sharpener with stretcher and shaver ‑ Item ID‑11601 ‑ Contact Michelle at 800‑315‑9950 x606

LOG BOOM CRANES1984 BARKO 80BC, logloader,includes the International truck, sn#15298 ‑ Item ID‑11428 ‑ Contact Daren at 800‑315‑9950 x603


www.LBXonline.comLOGGING EquIPMENT

1969 Fiat Allis articulating loader ‑ 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise ‑ Item ID‑11437 ‑ Contact‑Daren Bodine ‑ Phone‑ 800‑315‑9950 Ext‑ 6031980 DEERE 540B, Cable type log

skidder. Working daily. Owner retiring, tires rear 40% front 50%, center pins in good shape. Completely rebuilt 5 years ago; nothing since and nothing wrong with it. Has power shift transmission. Tire size is 23. ‑ Item ID‑11565 ‑ Contact Daren at 800‑315‑9950 x6031982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon ‑ Item ID‑11569 ‑ Contact Daren at 800‑315‑9950 x6031984 DEERE 540B, cable skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% ‑ Item ID‑11566 ‑ Contact Daren at 800‑315‑9950 x6031984 DEERE 540B ‑ 1984 DEERE 540B, tires 85%, winch, 4wd, center pin is in good condition, powerslide transmission. ‑ Item ID‑11564 ‑ Contact Daren at 800‑315‑9950 x6031984 Timberjack Forwarder ‑ Comes with a John Deere 544 winch, removable log arch. 453 Detroit, Clark 3 speed power shift, both rebuilt within last 100 hours. New rear tires, front tires are 50%. Too many new parts too list. ‑ Item ID‑11295 ‑ Contact Daren at 800‑315‑9950 x6031985 Treefarmer C6E Grapple ‑ Grapple, winch, complete overhaul 500 hours ago, 453 Detroit, powershift transmission, 28x26 tires are 50%, rebuilt grapple and arm cylinders, all worn hoses replaced. Winch needs shaft. ‑ Item ID‑11296 ‑ Contact Daren at 800‑315‑9950 x6031987 Franklin 170 Grapple ‑ 3700 hours, grapple and winch. Tires are at 60%. Starts easy and runs good. ‑ Item ID‑11297 ‑ Contact Daren at 800‑315‑9950 x6031988 DEERE 648D ‑ Front tire are 70% rear are 50%, Machine runs good ‑ Item ID‑11432 ‑ Contact Daren at 800‑315‑9950 x6031988 GMC Topkick Log Truck ‑ With Prentice loader. 3208 Cat diesel, air brakes and runs good. ‑ Item ID‑10920 ‑ Contact Michelle at 800‑315‑9950 x6061989 International S Series ‑ Prentice 120 loader, big cam 400 Cummins, 75,000 miles on Reman, 24.5 rubber is 50%, tag axle has super singles. ‑ Item ID‑11298 ‑ Contact Daren at 800‑315‑9950 x6031992 Prentice 180D Log Loader ‑ 1992 Prentice 180D Log Loader with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hours ‑ Item ID‑11434 ‑ Contact Daren at 800‑315‑9950 x6031993 FREIGHTLINER FLD12064ST, Detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives ‑ Item ID‑11641 ‑ Contact Daren at 800‑315‑9950 x6031993 Hitachi Track Delimber ,EX 100‑


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood ‑ fore‑wood with WooD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc‑ing square bundles‑palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320E-mail: [email protected] • Web: http://home.sprynet.com/sprynet/bbmfg

Shrink Wrap FireWOOD/WaSteWOOD

Financingavailable

Ask for Department LBX

$15 75

2 with forestry package ‑ Excellent forestry package (sawhead delimber attached, can pick up tipped over trees.), enclosed cab with mesh screen protection, air/heat, Fab Tec head 20’’ sawhead Delimber, 50’’ stroke Lateral tilt. Good Condition. ‑ Item ID‑10373 ‑ Contact Michelle at 800‑315‑9950 x6061993 Timbco 425 ‑ With dangle head; new under‑carriage and runs great. Has all books. ‑ Item ID‑11582 ‑ Contact Michelle at 800‑315‑9950 x6061993 Timberjack 380 C Skidder ‑ 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. ‑ Item ID‑11534 ‑ Contact Daren at 800‑315‑9950 x6031994 Cat D5H XL ‑ Orops, pat blade, rear screen, new rails and sprockets. Really nice machine with 6500 hours. ‑ Item ID‑11299 ‑ Contact Daren at 800‑315‑9950 x6031994 Hydro‑Ax 611E Feller Buncher ‑ Flotation tires at 75%, good overall condition. Works daily, 24” ax head, new injection pump, exceptionally clean operators station. ‑ Item ID‑11302 ‑ Contact Daren at 800‑315‑9950 x6031994 John Deere 640E Cable Skidder ‑ Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. ‑ Item ID‑11653 ‑ Contact Michelle at 800‑315‑9950 x6061994 Komatsu WA‑180 ‑ Diesel, forks (no bucket), A/C, new belts, ejection pump redone, hydraulic pump redone, differential rebuilt, center pin replaced, solid tires, runs good, good appearance. In Pennsylvania. ‑ Item ID‑11394 ‑ Contact Daren at 800‑315‑9950 x6031994 Prentice 210D ‑ Grapple built for scrap iron, straight machine, joystick controls, radio works. Nice machine. 9600 hours. ‑ Item ID‑11301 ‑ Contact Daren at 800‑315‑9950 x6031994 Timbco 425 ‑ Quadco 22” intermittent head, new 22” saw. Well maintained machine with 7000 hours. ‑ Item ID‑11303 ‑ Contact Daren at 800‑315‑9950 x6031994 timberjack 240a cable skidder ‑ 1994 timberjack 240a cable skidder,4‑speed manual trans. 5.9 cummins 6 cylinder with a bosh inj. pump, puts out around 225h.p 6000 hours on frame,12‑1500 hours on engine, no blow by 23.1x26 tires at 40% no chains,new clutch at the first of april 08,new heavy duty starter jan.08,pins and bushings tight,gearmatic winch perfect, machine looks and runs excellent,regular maintence always done. Sold without chains. ‑ Item ID‑11218 ‑ Contact Michelle at 800‑315‑9950 x6061995 FONTAINE CENTER MOUNT LOADER ‑ 95 FONTAINE SPREAD, NEW LEMCO 9000 LOADER, 22.5LP tires, 48’ x 102” trailor, Air Trac suspension ‑ Item ID‑11602 ‑ Contact Daren at 800‑315‑9950 x6031995 Franklin 4000 w/Roto Saw ‑ Includes a 1995 Roto Saw, 4 BT Cummins, Heat and Stereo. Runs and looks great. ‑ Item ID‑11662 ‑ Contact Michelle at 800‑315‑9950 x6061995 Hydro‑Ax 411E ‑ 1995 Hydro‑

Ax 411E, 7236 hours, 18” Koehring Sawhead, 28L‑26 Tires, 4WD, inclosed cab w/heat ‑ Item ID‑11673 ‑ Contact Daren at 800‑315‑9950 x6031995 International 9300 Log Truck ‑ Tri‑axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. ‑ Item ID‑11502 ‑ Contact Michelle at 800‑315‑9950 x6061995 Prentice 210D Log Loader with

tag‑a‑long delimber ‑ 1995 Prentice 210D Log Loader with tag‑a‑long delimber, 6000 actual hours, Located in Alabama ‑ Item ID‑11438 ‑ Contact Daren at 800‑315‑9950 x6031996 Barko Knuckleboom Loader ‑ Mounted on 1997 Pitts KB37 trailer, starts and runs good. Engine oil and all fluids are good, paint is fair, some steps are bent. Boom is tight, stick and grapple have some slack, hydraulics stromg, sheet metal is good. Lever

controls, a/c has blown hose, boom lights dont work. Trailer is in good condition, tires are 60%. FEChydra saw with 16’ decksaw. ‑ Item ID‑11304 ‑ Contact Daren at 800‑315‑9950 x6031996 Cat 515 Grapple Skidder ‑ John Deere winch, tires are 60%, 4 bearpaw chains, ‑ Item ID‑11305 ‑ Contact Daren at 800‑315‑9950 x6031996 Caterpillar D5H ‑ 140‑hp 10’6” 6‑way blade. New undercarriage, very clean. ‑ Item ID‑11306 ‑ Contact Daren

Go Green… save Green

with

Jackson


(6 Models)

We now have 6

Models to Choose from

We are iSo 9001 registered

DVDs available

over 20 years in Business

2009Midwest ForestIndustry Show

Don’t miss this opportunity to see the newest and most advanced machinery, equipment, and technology in the forest products industry. Pre-show activity includes a industry tour of 3 mills June 25.

For attendee or exhibitor information contact the show sponsor, Missouri Forest Products Association 573-634-3252 or visit www.moforest.org

June 26-278am-4pm

Show Me CenterCape Girardeau, MO

see us AT:

June 26–27, 2009Cape girardeau, Mo

1998 Bell Ultra THP Item ID: 11679Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2004 CAT 287BItem ID: 11652Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

at 800‑315‑9950 x6031996 freightliner 120c ‑ 1996 freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. ‑ Item ID‑11435 ‑ Contact Daren at 800‑315‑9950 x6031996 GMC Topkick ‑ Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. ‑ Item ID‑11101 ‑ Contact Michelle at 800‑315‑9950 x6061996 Rogers 20 ton trailer ‑ 26’ tilt bed, good floor, new steel over wheels, new brakes on rear axle, tires are 50%. ‑ Item ID‑11307 ‑ Contact Daren at 800‑315‑9950 x6031996 TIMBERJACK 460 ‑ 1996 TIMBERJACK 460, TIMBERJACK 460, CAB, AIR, DUAL ARCH/YO, OVERALL CONDITION OF MACHINE IS GOOD, 5408 hours ‑ Item ID‑11539 ‑ Contact Daren at 800‑315‑9950 x6031996 Vermeer TG400 Tub Grinder ‑ Powered by a Cat 3406 400‑hp diesel engine and has only 1432 hours. Has discharge conveyor. Well maintained. ‑ Item ID‑11486 ‑ Contact Michelle at 800‑315‑9950 x6061997 Timberjack 240B Cable Skidder ‑ Well maintained in top condition BT Cummins motor with manual transmission. The tires size is 23.1x26 and are 70%. Meter shows 5800 hours. S/N 973008 ‑ Item ID‑11654 ‑ Contact Michelle at 800‑315‑9950 x6061997 TIMBERJACK 460 Log Skidder ‑ 1997 TIMBERJACK 460, Timberjack 460

Log Skidder, EROPS with A/C & Heat, Serial #962609, 7303 hours ‑ Item ID‑11537 ‑ Contact Daren at 800‑315‑9950 x6031998 Bell Ultra THP ‑ Totally rebuilt, 7‑1‑08. engine,trans,drive motors, reconditioned a/c. New primeX 23x26 tires,new 3/4 rud multi‑ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hours. ‑ Item ID‑11679 ‑ Contact Daren at 800‑315‑9950 x6031998 CATERPILLAR 515, Grapple Skidder, Winch, Blade, 28L x 26 Tires, S/N 4LR00630, 3304T ENGINE, 140 HP, 6438 HRS, POWER SHIFT TRANS, EROPS, 40,000 WEIGHT, RUNS OUT GOOD. ‑ Item ID‑11429 ‑ Contact Daren at 800‑315‑9950 x6031998 Link‑Belt 2800 ‑ Runs and works good. 10,000 hours. Fluids changed at 9,000 hours. ‑ Item ID‑11650 ‑ Contact Michelle at 800‑315‑9950 x6061998 Prentice 210E ‑ Loader has worked on small wood yard, level controls, Cummins 6BTA, saw hook‑up, good trailer ‑ Item ID‑11439 ‑ Contact Daren at 800‑315‑9950 x6031998 Timberjack 360 with Grapple ‑ 1000 ours on Cummins engine, new center pins, good rear tires, A/C, two extra tires and wheels. 6700 total hours. ‑ Item ID‑11360 ‑ Contact Daren at 800‑315‑9950 x6031998 Timberjack 460 Skidder ‑ 1998 Timberjack 460 Skidder, dual arch, winch, 30.5x32 rubber, enclosed cab, Cummins engine ‑ Item ID‑11535 ‑ Contact Daren at 800‑315‑9950 x603

1998 Volvo truck w/160 Barco Log Loader ‑ 1998 Volvo truck With a Volvo diesel engine, 5 speed transmission ‑ Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great ‑ Item ID‑11436 ‑ Contact Daren at 800‑315‑9950 x6031999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hours not known; meter not working. ‑ Item ID‑11480 ‑ Contact Daren at 800‑315‑9950 x603“2000 Morbark 3036 Whole Tree chipper ‑ Loader, Joystick controls with A/C and heat. New drum and bearings. serial# is 4661100‑3036 ‑ Item ID‑11363 ‑ Contact Daren at 800‑315‑9950 x603

2000 TIMBERJACK 460 Skidder, 30.5 ISD Tires, 6BTA Cummins, 120 Esco Grapple, 8900 hours ‑ Item ID‑11538 ‑ Contact Daren at 800‑315‑9950 x6032001 John Deere 540G III ‑ 2001 year model. Is a 548 converted to a 540. 6500 hours ‑ Item ID‑10853 ‑ Contact Michelle at 800‑315‑9950 x6062001 Morbark 3036 ‑ Whole tree chipper, powered by a 325‑hp Cat diesel engine; has self‑loading grapple; one year old heavy duty drum and runs great. ‑ Item ID‑11587 ‑ Contact Michelle at 800‑315‑9950 x6062002 773G Bobcat ‑ Has 3900 hours and a Kubota diesel. ‑ Item ID‑11497 ‑ Contact Michelle at 800‑315‑9950 x6062002 Case 90XT Skidloader ‑ has 1950 hours, 7’ bucket. ‑ Item ID‑11675 ‑ Contact Michelle at 800‑315‑9950 x606


“Providing a full range of industrial metal detectors since 1965.”

MDI probe 2100portable InDustrIal Metal DetectorSimPLE TO OPEraTE – just turn on and go!MDI’S SupErIor DIgITal TECHnology will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control

• Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths

• Bright L.E.D. display indicates signal strength and battery level

• Touchpad control allows precision pinpointing of tramp metal

P.O. BOX 26440 • EUGENE, OREGON 97402PHONE: 541-345-7454 • FAX: 541-345-7971

www.metaldetectorsinc.com

The most automated Set-Shaft Setworks on the market...With the press of one button, it will calculate the cant and boards for an entire log, for every log until the operator cancels the button selection. Visit our website or call for a brochure. Linear, Proportional, Scragg, and Dual System models available (Slabber Head add-on shown). We also have basic Sylvatech replacements and controls for edgers, trimmers, resaws, tallies, custom systems, and more.

KM-16 TrimsawItem ID: 11670Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Morbark Chip HarvesterItem ID: 11374Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Price reduced

CAT 518C grapple SkidderItem ID: 11293Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com2003 Cat 247 Track Skidloader ‑ New rear bogie wheels, hydraulic quick attach, vertical lift self leveling bucket. Machine has only 1100 hours. Was well maintained and is ready to work. ‑ Item ID‑11348 ‑ Contact Daren at 800‑315‑9950 x6032003 ROTOCHOPPER CP118, 80hp, 790 hours, CAT diesel engine, fixed hammers, one‑pass re‑grind & coloring system. ‑ Item ID‑11287 ‑ Contact Daren at 800‑315‑9950 x6032004 Bandit Beast ‑ Powered by a V12 800‑hp Cat diesel engine. 2300 hours. Photos coming soon. ‑ Item ID‑11233 ‑ Contact Michelle at 800‑315‑9950 x6062004 Cat 287B ‑ 2004 year model, on tracks. 1390 hours. Cab with A/C and hand controls. Tooth bucket. This is a

one owner machine. ‑ Item ID‑11652 ‑ Contact Michelle at 800‑315‑9950 x6062005 John Deere 310G ‑ Stock #950158, serial #t310gx950158, cab, A/C, turbo, GP bucket, 19.5 tires, 24” bucket. ‑ Item ID‑11350 ‑ Contact Daren at 800‑315‑9950 x6032005 John Deere 550J ‑ This has only 1981 hours, has a cab with A/C, 24” pads, rear cab screens and front limb risers. The pins and bushings have been turned and the sprockets have been replaced. ‑ Item ID‑11661 ‑ Contact Michelle at 800‑315‑9950 x6062005 Rayco RC12 Chipper ‑ John Deere engine with 500 hours, ulsating down pressure, like new condition. Machine

is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. ‑ Item ID‑11351 ‑ Contact Daren at 800‑315‑9950 x6032006 Caterpillar 287D Track Skidloader ‑ Hydraulic quick attach, vertical lift, self leveling 83” bucket, auxillary hydraulic. 600 hours. ‑ Item ID‑11352 ‑ Contact Daren at 800‑315‑9950 x6032006 Eco‑Log 580B ‑ 2700 hours. Powered by a 250‑hp Cat diesel engine. Logmax 7000b Harvesting head. Very motivated seller. ‑ Item ID‑11250 ‑ Contact Michelle at 800‑315‑9950 x6062006 John Deere 320 Skidloader ‑ Orops, foot controls, beefy baby tires,

GP bucket, Warranty!!! Stock number 130714 ‑ Item ID‑11353 ‑ Contact Daren at 800‑315‑9950 x6032006 John Deere 550 ‑ Long track, orops, hydrostatic transmission, 105” pat blade, screens, sweeps, winch, extended warranty. 525 hours. Machine is located in Cambridge, Ohio. ‑ Item ID‑11354 ‑ Contact Daren at 800‑315‑9950 x6032006 Rotobec 80 Elite ‑ NEW! Rotobec 80 Elite. Many to chose from. ‑ Item ID‑11356 ‑ Contact‑Daren Bodine ‑ Phone‑ 800‑315‑9950 Ext‑ 6032007 John Deere 450J ‑ Long track, orops, 97” blade. Extremely low hours and in excellent condition. ‑ Item ID‑11358 ‑ Contact Daren at 800‑315‑9950 x6032007 New Holland TT75A ‑ Only 10 hours. Has a brand new $5,000.00 winch. ‑ Item ID‑11498 ‑ Contact Michelle at 800‑315‑9950 x606380 Timberjack ‑ ‘81 453 Detroit w/ the gearmatic wynch. Transmission just rebuilt, along with converter, New starter and new injectors. New Tork converter. Front tires about 50% back about 25 to 30% Reason for selling is that don’t need it. ‑ Item ID‑11499 ‑ Contact Michelle at 800‑315‑9950 x606518 Cat Grapple Skidder ‑ Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber ‑ Item ID‑11078 ‑ Contact Michelle at 800‑315‑9950 x606‘89 380 Timberjack ‑ 6 cylinder Cummins Power shift. Taken care of it like a baby. Great shape! ‑ Item


800-844-7680P.O. Box 187Lynn, Alabama 35575

www.winstonmachinery.netFax: 205-893-2401

Log DeCK

▲

uNsCrAMBLer AND PACKAge DeCK

WINsToN MACHINerYBuILDs BeTTer, sTroNger MACHINerY

AT THe INDusTrY’s MosT CoMPeTITIve PrICes!

caLL today

save 20%k

Skylead YarderItem ID: 11527Contact: MichellePh: 800-315-9950 x606www.LBXonline.com

Morbark 58” Chip PacItem ID: 11286Contact: Daren800.315.9950 Ext. 603

www.LBXonline.comID‑10811 ‑ Contact Michelle at 800‑315‑9950 x60698’ 620 Prentice Track Cutter ‑ Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,00 hrs. on it. ‑ Item ID‑10479 ‑ Contact Michelle at 800‑315‑9950 x606Barko 160A with Chop Saw ‑ 1992 year model. Chop Saw 2000 or 2001 included. ‑ Item ID‑11117 ‑ Contact Michelle at 800‑315‑9950 x606

Barko 250 ‑ Log Loader with new grapple ‑ Item ID‑10706 ‑ Contact Michelle at 800‑315‑9950 x606Barko 495 Loader ‑ 2004 year model. Mounted on Riley H.D. trailer with Riley 2800B delimber. Enclosed cab with air. Very clean, one owner. ‑ Item ID‑10683 ‑ Contact Michelle at 800‑315‑9950 x606

Barko Fellerbuncher 785 ‑ 1999 year model with a 22” Koehring head. ‑ Item ID‑11334 ‑ Contact Daren at 800‑315‑9950 x603Bell Ultra C ‑ 1997 year model, with Cummins 3.9 110‑hp 4 cylinder diesel engine. A/C in cab. 18” Koehring saw felling head, joystick controls. ‑ Item ID‑10803 ‑ Contact Michelle at 800‑315‑9950 x606Bell Ultra T ‑ 1997 year model with 1989 hours. 23.1 tires are at 90%, joystick controls, extra 24” bars, new seat, no dents or broken glass. Dangle head. Currently working. A/C in cab. S/N BCH4648 ‑ Item ID‑10727 ‑ Contact Michelle at 800‑315‑9950 x606Bobcat 610 ‑ Older model, 1974. Includes backhoe and bucket. Was used to feed a firewood processor. ‑ Item ID‑11400 ‑ Contact Michelle at 800‑315‑9950 x606Bobcat 843B Loader ‑ Grapple loader, photos and more info coming soon. ‑ Item ID‑10777 ‑ Contact Michelle at 800‑315‑9950 x606“Case 580 Fork Lift ‑ Mid 70’s Fork Lift 580 Case, High Lift, Good Condition ‑ Item ID‑11493 ‑ Contact Daren at 800‑315‑9950 x603Cat 242B Skidsteer ‑ 2006 year model. 300 hours on machine. Cat engine. Includes bucket, forks, spare tire and chains. ‑ Item ID‑10845 ‑ Contact Michelle at 800‑315‑9950 x606Cat 518 Grapple Skidder ‑ 1980 year model with grapple, winch and canopy. Hours unknown; no meter. ‑ Item ID‑11103 ‑ Contact Michelle at 800‑315‑

9950 x606Cat 518C Grapple Skidder ‑ 1995 year model. With grapple & winch. 12000 hours ‑ 200 hours since engine and transmission were rebuilt. Really good condition. Tires are 28 X 46. Open cab. ‑ Item ID‑11293 ‑ Contact Michelle at 800‑315‑9950 x606Cat 545 Grapple Skidder ‑ 2003 year model. Please call for information. ‑ Item ID‑10996 ‑ Contact Michelle at 800‑315‑9950 x606Cat 545 Grapple Skidder ‑ 2004 year model. Call for more information. ‑ Item ID‑10997 ‑ Contact Michelle at 800‑315‑9950 x606Cat 8000# Forklift ‑ 1985 year, V80E type d. Axle repaired and transmission fixed. ‑ Item ID‑10674 ‑ Contact Michelle at 800‑315‑9950 x606Cat 920 Loader ‑ 2038 hours. Great condition. ‑ Item ID‑11419 ‑ Contact Michelle at 800‑315‑9950 x606Cat D3 ‑ 1999 year model with 2200 hours. ‑ Item ID‑11411 ‑ Contact Michelle at 800‑315‑9950 x606Cat D4H‑TSK ‑ 1996 year model with 1100 hours. Full forestry package; winch and Esco Grapple. ‑ Item ID‑11003 ‑ Contact Michelle at 800‑315‑9950 x606Cat D5H Crawler/Track Dozer ‑ 1989 year model track skidder with Young Arch Esco grapple with winch. 30” pads. Good condition. ‑ Item ID‑11030 ‑ Contact Michelle at 800‑315‑9950 x606Cat D5M XL Dozer ‑ With EROPS, Sweeps and screens. 50,000 pound W5C winch. 3490 hours. New factory


www.selectequipment.net

ANBO Puts the Strength of Hydraulicsin the Palm of Your Hand

Imagine ONE attachment that moves logs,rocks, brush and debris, loads bark, clean uplog yards and burn piles, creates firesuppresion lines and has the durability to digout stumps and roots!

Walk Behinds

Mini-Tractors

Compact Tractors

Skid Steer Loaders

Heavy Duty Grapple

ANBO ATTACHMENTS AREBUILT TO HANDLE YEARS

OF USE AND ABUSE!

Stop Compromisingand Call ANBO

To locate a dealer nearest you, call

866-684-3330www.anbomanufactur ing.com

AnBo Mfg. Inc. | 509-684-3330 Direct866-684-3330 | [email protected]

Doing many different jobs inmany different industries:

▼ Logging▼ Sawmills▼ Land Clearing & Site Prep▼ Construction▼ Farming & Ranching▼ Fire Suppression▼ Landscaping and More

✦ Featured in over 20 Articles in the Us ✦

Morbark Model 15 eLecTric wood chipperComes with full warranty, 100 HP Electric Motor, with a 15”

Chipping capacity. This machine has Dual hydraulic feed wheels with hydraulic down pressure

and lift assist, 360 degree discharge chute, and a two knife

chipping drum. Maintaining this machine is a breeze, and

cost to run is very inexpensive. $21,500. Located in Oregon @

Enviro Chipper Ind. Inc.

1-800-287-2048

NeW

log arch. Very clean and straight machine. ‑ Item ID‑11253 ‑ Contact Michelle at 800‑315‑9950 x606Cat D6D Dozer ‑ Dozer with new undercarriage, ripper, fresh overhaul, no oil leaks, one set of hydraulic outlets; runs strong. 1983 year model. ‑ Item ID‑11495 ‑ Contact Michelle at 800‑315‑9950 x606Cat IT18B ‑ 1990 year model. Includes forks, bucket and boom pole. 4‑cylinder, 113‑hp. Photos coming soon. ‑ Item ID‑10838 ‑ Contact Michelle at 800‑315‑9950 x606Cat IT‑18B Loader ‑ Mid 90’s model. Please call with questions. ‑ Item ID‑10705 ‑ Contact Michelle at 800‑315‑9950 x606CBI Magnum Force 4800 ‑ 2001 year model, 3000 hours, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000‑hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hours on them. ‑ Item ID‑10577 ‑ Contact Michelle at 800‑315‑9950 x606DEERE 440, sn#090370, with a winch ‑ Item ID‑11431 ‑ Contact Daren at 800‑315‑9950 x603“Fecon MZA2500 ‑ Portable, horizontal grinder with Cat 3208 250‑hp diesel engine. Machine has remote control and only 2441 hours. Was a one owner machine. ‑ Item ID‑10801 ‑ Contact Michelle at 800‑315‑9950 x606Ford Tractor with Trailer ‑ 1989 Ford Tractor truck with 48’ Great Dane Trailer ‑ Item ID‑10671 ‑ Contact Michelle at 800‑315‑9950 x606Franklin 105 and shred king forestry machine ‑ Both units powered by detroit engines, excellent condition, will separte the units, also have 16” Morbark sheer head for the franklin. serial#fe0159 Model #8000FE ‑ Item ID‑10415 ‑ Contact Michelle at 800‑315‑9950 x606Franklin 132PAB Short Wood Skidder ‑ 4‑cylinder Turbo Cummins diesel. Meter reads 2602. Runs & works good. Two tires are good and two are like new. Is 1988 or 1989 with a 10’ bed. ‑ Item ID‑10841 ‑ Contact Michelle at 800‑315‑9950 x606Franklin Tree Farmer 170PTM‑31A ‑ 1992 year model. Grapple skidder with 1283 hours. S/N 15244. Photos coming soon. ‑ Item ID‑11015 ‑ Contact Michelle at 800‑315‑9950 x606Gehl 3935 Skidloader ‑ 2005 year model with less than 2000 hours. ‑ Item ID‑10643 ‑ Contact Michelle at 800‑315‑9950 x606Gehl 7800 Skidloader ‑ 2004 year model with enclosed cab. Has radio and heat. ‑ Item ID‑11649 ‑ Contact Michelle at 800‑315‑9950 x606Hood 28000 Loader ‑ Year model 2004; 72” hot saw; only 340 hours. ‑ Item ID‑11418 ‑ Contact Michelle at 800‑315‑9950 x606Hydro‑Ax 411 ‑ Powered by a 6 cylinder Cummins, has 18” Koehring Sawhead and approximately 11,000 hours. Is a 1993 or 1994 year model. Photos coming soon. ‑ Item ID‑11532 ‑ Contact Michelle at 800‑315‑9950 x606Hyundai with 2 Head Roller ‑ 1994

Hyundai with 820 roller stroke Lakewood head. ‑ Item ID‑10977 ‑ Contact Michelle at 800‑315‑9950 x606JCB 540 Wheel Loader ‑ 2000 Year model. 4X4, 2‑1/2 yard quick attach bucket, Extenda hoe, cab with heat and A/C, 5628 hours, one owner and well maintained. ‑ Item ID‑10774 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 290 ‑ With Elite processing head, 2 roller. 4 cylinder John Deere engine. Very good undercarriage. ‑

Item ID‑10934 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 410D ‑ Backhoe, front end loader, new tires, starts easy and runs great. ‑ Item ID‑10726 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 440B ‑ Log Skidder New Bearclaws for front tires, New Cable, New Batteries. No oil leaks. No smoke. Used very little ‑ Power shift ‑ Been overhauled. Ready to work. Believed to be Late 70’s to early 80’s model ‑ Item

ID‑10537 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 440C ‑ 1977 John Deere 440C. 90‑hp, 4‑wheel drive. All new u‑joints and seals, new seals in the blade cylinders, 125ft. of new 5/8 main line cable. ‑ Item ID‑11681 ‑ Contact Daren at 800‑315‑9950 x603John Deere 440C ‑ New engine and 70% on the tires. ‑ Item ID‑11417 ‑ Contact Michelle at 800‑315‑9950 x606


Why?Why?We use only the highest quality nickel alloy steel •NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and •manufacturing experience

Proudly made in the • USAStock to 10 days on standard sizes•Nations largest distributor/manufacturer of saws •and knives

www.usblades.net

CALL 800-862-4544Locations in

• Hampden, ME • Meridian, MS• Florence, SC • West Monroe, LA

Morbark 2400 XL 20” ChipperItem ID: 11678Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

Morbark 2600 Portable grinderItem ID: 10743Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

John Deere 440CItem ID: 11681Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

Morbark 1200 Tub grinderItem ID: 11660Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

John Deere 444E Wheel Loader ‑ Includes forks and bucket. 6‑cylinder 130‑hp. Is a 1992 or 1994. Cab with heat. complete rebuilt motor Photos coming soon. ‑ Item ID‑10839 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 450B ‑ 1973 year model,

65‑hp diesel, 6‑way blade, 16” pads, lever steering. ‑ Item ID‑10694 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 450B ‑ with winch and blade ‑ Item ID‑10655 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 450D ‑ 1984 year model

with 4700 hours. Has new tracks and sprockets. ‑ Item ID‑10681 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 460D ‑ 2001 year model. Cylinders are repacked. Tires are 75%. 10,000 hours but well maintained. ‑ Item ID‑10826 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 490E ‑ Processor. Fabtek 4‑head roller head. Is a 1994 year model powered by an 80‑hp diesel engine. Runs great. ‑ Item ID‑11252 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 540D ‑ 1987 year model. 5829 hours, 100‑hp cable skidder, 8 speed power shift. $1000 in the winch. Engine rebuilt 3 years ago. 6’ blade. ‑ Item ID‑10667 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 548 D Grapple Skidder ‑ John Deere 548 D Grapple Skidder, 23/1x26 rubber at 90%. Enclosed cab, no winch. ‑ Item ID‑11558 ‑ Contact Daren at 800‑315‑9950 x603John Deere 548D Skidder ‑ 1993 year model. Less than 1500 hours on new motor, winch rebilt, kingpin replaced. Has grapple/winch combination. ‑ Item ID‑11479 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 640D ‑ With grapple and winch. Enclosed cab with heat. Tires are 80%. Rims are set up for dual wheels. All new filters. 1989 year model. Comes with 10’ blade and chains. Excellent condition! ‑ Item ID‑10557 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 640E Cable Skidder ‑ 1995 year model. 500 hours on new motor. Has new winch, new center, new batteries and heavy duty rears. This machine runs great and is ready to go to work. ‑ Item ID‑11330 ‑ Contact Daren at 800‑315‑9950 x603John Deere 643D ‑ 1995 year model. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hours on machine. heated and A/C cab. ‑ Item ID‑11414 ‑ Contact Daren at 800‑315‑9950 x603John Deere 648E ‑ 1992 Year model includes grapple, dual function. Rubber is 80%. ‑ Item ID‑10562 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 650H ‑ 2000 year model in great condition. 10’6” blade with 24” new pads. Hydrostatic transmission. 4795 hours. 90‑hp. ‑ Item ID‑10560 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 650H ‑ 2000 year model, 60% undercarriage with full forestry package. Rebuilt injector pump and winch is resealed. 4000# winch. 5600 hours. Has fair leads for winch. 18” wide pads. ‑ Item ID‑10569 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 750C ‑ 2005 year model. John Deere dozer with A/C and radio in the cab. Photos coming soon! ‑ Item ID‑10810 ‑ Contact Michelle at 800‑315‑9950 x606John Deere 843H ‑ 2001 year model. 28/26 tires at about 60%. Waratah head, all pins are tight and sheet metal is straight. ‑ Item ID‑11337 ‑ Contact Daren at 800‑315‑9950 x603Koehring Hot Saw ‑ 22” head. Very good condition. The bottom pin is 2” around and 12” long. The top pin is


ConveRt ALL thoSe woRn-out BAnd BLAdeS into CA$h!

Does the sAme thing with your steeL strApping, too!GRind youR own KniveS with

the PiPeR’S ModeL #46

youR LoG tuRneR LooSinG it’S LiFt?

the piper’s Log turner gives you the muscLe to turn ‘em ALL.

PiPer’s saw shoP, inc.P.O. BOx Drawer 30

Central City, Ky 42330 1-800-845-6075Fax 270-754-2500

www.piperssawshop.com

WV MINE TOOLS & SERVICE, INC.Introduces its NEWSABER INSERTED

CARBIDE SAW BIT.

SA

BE

R

WV MINE TOOLS & SERVICE, INC.PO Box 402, MT. Morris PA 15349

[email protected]

CALL TODAY FORFREE SAMPLES.

ORDER TODAY$2.45 per BIT

$58.00 for 4 inchDiamond Jockey Wheels

WE ARE AT THECUTTING EDGE

OF YOURBUSINESS!

Call TOLL FREE888-291-5956

2‑1/2” around and 4‑3/8” long. ‑ Item ID‑11469 ‑ Contact Michelle at 800‑315‑9950 x606Log Truck with Prentice 120 ‑ 1998 loader in good condition. Truck engine needs some work. It did pass its last inspection. Photos coming soon. ‑ Item ID‑10835 ‑ Contact Michelle at 800‑315‑9950 x606Manitou MLT523 ‑ MLT523 Turbo, 2005 year model, Perkins diesel, new front foam filled tires, rear tires are good. 17’ height reach and 8’ straight out, 4 or 2 wheel steer, enclosed cab with air and heat, 1750 hours, has extra grapple bucket. ‑ Item ID‑11605 ‑ Contact Michelle at 800‑315‑9950 x606Massey Ferguson 6170 Tractor ‑ This tractor is a year model 1998; it has air in the cab, shuttle shift, 85 to90% rubber on the tires and only 2468 hours. It is 120‑hp. Is 4‑wheel drive. ‑ Item ID‑10546 ‑ Contact Michelle at 800‑315‑9950 x606Metavic Log Loader trailer ‑ Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. ‑ Item ID‑11362 ‑ Contact Daren at 800‑315‑9950 x603Mitsubishi Log Loader ‑ High cab, 66,000 weight, low use with good undercarriage. Has a new starter. Has grapple ‑ Item ID‑10780 ‑ Contact Michelle at 800‑315‑9950 x606Morbark Stack Trac ‑ Model 2000, S/N 316. Track mounted. ‑ Item ID‑10687 ‑ Contact Michelle at 800‑315‑9950 x606Morbark Tree Shear ‑ 20” Morbark SB52 Superbuncher tree shear. ‑ Item

ID‑11468 ‑ Contact Michelle at 800‑315‑9950 x606Morbark Wolverine ‑ New Motor and tires are 80% ‑ Item ID‑10549 ‑ Contact Michelle at 800‑315‑9950 x606Peerless Chip Trailer ‑ 1972 Year model, 40’ x 92”. Inside ribs with aluminum siding. Road worthy. ‑ Item ID‑11026 ‑ Contact Michelle at 800‑315‑9950 x606Prentice 180 Loader ‑ Please call for information ‑ Item ID‑10917 ‑ Contact Michelle at 800‑315‑9950 x606

Prentice 210D ‑ 1991 year model, 30’ boom and S&M Trailer. 6 cylinder BT Cummins (about 140‑hp) ‑ Item ID‑10602 ‑ Contact Michelle at 800‑315‑9950 x606Prentice 210D Loader ‑ 1996 year model; runs good. Has rebuilt grapple and cylinders. ‑ Item ID‑11514 ‑ Contact Michelle at 800‑315‑9950 x606Prentice 310E Knuckleboom Loader ‑ 1999 year model, with CTR delimber, air & heat, Cummins power and 7900 hours ‑ Item ID‑10916 ‑ Contact

Michelle at 800‑315‑9950 x606Prentice 720 Processor ‑ With 33” Timbco Sawhead, 8.3 Cummins diesel engine, 5400 hours. Also track chains & sprockets are about 40%. ‑ Item ID‑11318 ‑ Contact Michelle at 800‑315‑9950 x606Prentice Loader ‑ 1995 Prentice loader. This is just the loader, truck and trailer not included. ‑ Item ID‑11651 ‑ Contact Michelle at 800‑315‑9950 x606Skylead Yarder ‑ $40,000.00 in new parts. Brand new motor 300 hours


ideal to Grind:

Simplicity MasteredEase of Operation with Less DowntimeChange Particle Size While You Grind

Universal reFiner CorPoraTionP. O. Box 151 • Montesano, WA 98563

800-277-8068

the rascal h.a.w.G.

Construction Waste • Stumps • Land ClearingGreen Waste • Asphalt Shingles • Palm • Pallets

Difficult & Dirty Materials


“ANGLE BOSS”Up-Cut Saws

Your solution for:• Speed and accuracy • Safety—two-hand cycle control—non-exposed

sawblade in its rest position-material is held firm by guard/clamp assembly while cutting is performed

• Ease of Operation

• Mitering capability: Left & Right axis rotation of sawblade up to 75o from center• Also available bevel capacity: Blade can lay over to the left up to 45o from zero• From basic manual machines to fully CNC-controlled cut-off systems

Vista Machines Inc.19 Monarch Street • Littlestown, PA 17340

Tel: (717)359-9212 • Fax: (717)359-4222 • www.angleboss.com

Call today and let the “ANGLE BOSS” help solve your production dilemmas!

VistaVista

42

ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999 year model. ‑ Item ID‑11527 ‑ Contact Michelle at 800‑315‑9950 x606Timbco 415C ‑ 1998 year model with a 2006 Rally 2 processing head. Only 600 hours on the head, 1500 on the new tracks and 700 on the rebuilt engine. No hours on the new computer. Serial# tc13171024998 Repo! ‑ Item ID‑10763 ‑ Contact Michelle at 800‑315‑9950 x606Timbco 415C ‑ 1998 year model with Fabtek 4‑roller processor head. John Deere 6 cylinder 170‑hp diesel engine. Hydrostatic transmission. Runs great, strong machine. Hour meter is not working. ‑ Item ID‑11063 ‑ Contact Michelle at 800‑315‑9950 x606Timbco 425 Feller Buncher ‑ 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. ‑ Item ID‑11031 ‑ Contact Michelle at 800‑315‑9950 x606Timbco 425 with Bar Saw Head ‑ 2002 year model powered by a 260‑hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hours, in good condition and very work ready. ‑ Item ID‑11340 ‑ Contact Michelle at 800‑315‑9950 x606Timbco Forwarder ‑ 1998 year model with 10,000 hours. ‑ Item ID‑11599 ‑ Contact Daren at 800‑315‑9950 x603Timberjack 230D Skidder ‑ 3‑cylinder Detroit diesel. Hercules winch. Tires are good. Needs to be jumped across

the starter, needs new starter and cylinoid. ‑ Item ID‑10561 ‑ Contact Michelle at 800‑315‑9950 x606Timberjack 380 ‑ Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. ‑ Item ID‑11072 ‑ Contact Michelle at 800‑315‑9950 x606Timberjack 380 Grapple Skidder ‑ Esco grapple, 453 Detroit Engine. Engine and transmission are strong, pins are tight. 1980 Year model. ‑ Item ID‑10950 ‑ Contact Michelle at 800‑315‑9950 x606Timberjack 460 ‑ Year model 1997, Esco Grapple, tires are 28. Can be seen working; real good condition. ‑ Item ID‑10558 ‑ Contact Michelle at 800‑315‑9950 x606Timberking 1220 Portable Sawmill ‑ Like new, low hours. Call for more information. ‑ Item ID‑11570 ‑ Contact Michelle at 800‑315‑9950 x606Timberking B20 Sawmill ‑ Is like new. Only used a couple times. 4 post cutting head for accurate cuts, always kept in covered shed. Comes with blades, seat, towing package, tack, log turner all hydraulic. Photos to come soon. ‑ Item ID‑11559 ‑ Contact Michelle at 800‑315‑9950 x606Timberking B20 Sawmill with Edger ‑ 2006 year model sawmill with 545 hours. Hydraulic log loader and turner; hydraulic log dog and toeboards; saws up to 21’ logs; computer setworks with 8 presets; debarker; 30‑hp Kohler engine for sawblade and 5‑hp Briggs & Stratton for hydraulic unit. Also includes a Miner 2‑saw edger. ‑ Item ID‑11583 ‑ Contact Michelle at 800‑315‑

9950 x606Tree Farmer 3600 ‑ 3 wheel, hotsaw attachment, 24.5x32 rubber, 6 cylinder Cummins and 6700 hours. 1999 year model. ‑ Item ID‑10659 ‑ Contact Michelle at 800‑315‑9950 x606Tree Farmer C5 ‑ Great condition forwarder. Joystick controls, new tires. 1994 year model. Has 2000 hours on a factory reconditioned engine. Super grip loader bucket. ‑ Item ID‑11251 ‑ Contact Michelle at 800‑315‑9950 x606Valmet 546 ‑ 1991 year model, 955 head, 6 wheel drive. ‑ Item ID‑10724 ‑ Contact Michelle at 800‑315‑9950 x606Valmet 546H ‑ 1995 Year model. Powered by a 4 cylinder Ford diesel. 960 processor head, enclosed cab with

heat and a/c, joystick controls. ‑ Item ID‑10725 ‑ Contact Michelle at 800‑315‑9950 x606Vermeer 400L Tub Grinder ‑ This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400‑hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours. Also a folding discharge conveyor. ‑ Item ID‑10539 ‑ Contact Michelle at 800‑315‑9950 x606Vermeer Stump Grinder ‑ Model 630A hydraulic stump grinder. ‑ Item ID‑11494 ‑ Contact Michelle at 800‑315‑9950 x606WHO P10‑34HD ‑ 1997 year model, with less than 2000 hours. Has self loading grapple powered by a Cummins 85‑hp.


Here are A FEW things to know about the wood shaving businessSize really does matter; Two heads are better than one

It is better to change knives outside the mill, than to climb into a box and drop on your hands and knees, praying that you or your employee doesn’t get cut.

We took that advice—That is why we offer our HO Series with Slide Out Heads

• Shaving output is 21 to 50 yards per hour• Power supply is electric or portable

We offer build yourself kits; we supply everything but the welder. 30" mills start at $49,500.00

E-Mail: [email protected] Web site: www.IndustMach.com

877-847-5877

30"-40"-60" Shaving Mills With Slide Out Heads

We also offer:• Sawdust-fired Furnace 15-60

million BTU - for Rotary Dryers• Drum Shaving Mills for scrap lumber• Shaving Conveyors• Shaving Bailers• Knife Sharpeners

1998 rotochopper MC166Item ID: 11232Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Brewco B-1600 resawItem ID: 10865Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

Price reduced1989 International w/ Hood 7000 LoaderItem ID#: 11674Contact: Michelle800-315-9950 Ext. 606

SEE PICTUrE AT LBXonline.com

Shop Built Shaving Mill25” x 54” Box with 30 hp electric motor

Item ID#: 11526Contact: Michelle800-315-9950 Ext. 606SEE PICTUrE AT LBXonline.com

Grinder is powered by a Cat 402‑hp. 8” magnetic head pulley on discharge conveyor. Has 1‑1/4” fixed hammers. New belly conveyor. Comes with a Ford single axle truck to pull it. ‑ Item ID‑10548 ‑ Contact Michelle at 800‑315‑9950 x606


www.LBXonline.comMISCELLANEOuS

9x30 Trommel Screen ‑ This trommel is in good overall condition and is available immediately. Price includes

trailer loading. The electric motors and pump for the hydraulic system is also included as well as sheet metal cover and the support structure. Belly conveyor has been sold seperately. Low hours. ‑ Item ID‑11471 ‑ Contact Michelle at 800‑315‑9950 x606Armstrong No. 4 Band Saw Sharpener ‑ Right handed, automatic. Complete with motors, starters, carbide face plate, “Sidewinder” feed finger, one set of cams and a set of post brackets. ‑ Item ID‑10564 ‑ Contact Michelle at 800‑315‑9950 x606Container ‑ Refrigerated ‑ Electrical

motor controls installed in this 40’ container, several solid state reduced voltage starters, other starters, breakers, main transformer, etc. ‑ Item ID‑10957 ‑ Contact Michelle at 800‑315‑9950 x606

Cooks Sharpener ‑ Electric band sharpener ‑ Item ID‑10898 ‑ Contact Michelle at 800‑315‑9950 x606Dip Tank System ‑ Installed in 1996. Tank is 10’ wide X 20’ long X 94” deep. Infeed deck is 21’ long X 13’6” wide. Infeed rollcase is 20’ long X 66” wide. Infeed drive is 10‑hp. Outfeed rollcase is 45’ long X 66” wide. 2 storage decks, one is 20’L X 11’3”W the other is 20’L X 10’3”W. Hydraulic unit is 50‑hp, 3 phase. New cost $230,000.00. (Building in photos is not included.) ‑ Item ID‑10850 ‑ Contact Michelle at 800‑315‑9950 x606Forano Shaker Screen ‑ 5’X14’ double deck shaker screen. ‑ Item ID‑10958 ‑ Contact Michelle at 800‑315‑9950 x606Galvanized duct piping ‑ 300’ of 18” ‑ $5.00 per foot, 300’ of 20” ‑ $6.50 per foot, 50’ of 36” ‑ $11.00 per foot, 35’ of 48” ‑ $17.00 per foot ‑ Item ID‑10848 ‑ Contact Michelle at 800‑315‑9950 x606Hough 65 Motor for Salvage ‑ w/ a good cummins CN6 motor & converter. ‑ Item ID‑10480 ‑ Contact Michelle at 800‑315‑9950 x606“Loading Ramp ‑ Adustable height ramp, 66” x 30’. 15,000 pound capacity. ‑ Item ID‑10596 ‑ Contact Michelle at 800‑315‑9950 x606Log Deck ‑ 20’ log deck with stop and load. ‑ Item ID‑10686 ‑ Contact Michelle at 800‑315‑9950 x606Lumber Carts ‑ 15 carts available. Fairly new, very little use. $450.00 each. ‑ Item ID‑10904 ‑ Contact Michelle at 800‑315‑9950 x606Lumber Carts ‑ New ‑ Either with US or import casters. Can also get with adjustable back‑stop $750 each with US casters, $700 each with import casters, add $225 to either for adjustable backstop. Call with any questions. ‑ Item ID‑10906 ‑ Contact Michelle at 800‑315‑9950 x606Mellot Drop Belt ‑ 15’ drop belt with new drive motor. ‑ Item ID‑10554 ‑ Contact Michelle at 800‑315‑9950 x606Read Screen All RD90A ‑ 1989 year model with two‑deck screen, 2” top screen and 3/4” bottom screen. In great shape, has 2025 hours. ‑ Item ID‑11088 ‑ Contact Michelle at 800‑315‑9950 x606Round table ‑ 12’ round turn‑table in


HeAvY DuTY ForKsAT BIg sAvINgs

■ in StOCK

■ Same Day ShiPment

■ let US QUOte yOUr SPeCial DeSign FOrKS. Very COmPetitiVe PriCing.

BAY equIPMeNT Co. / (616) 392-1811P.O. BOx 1919 / HOlland, MicH. 49422 • Fax (616) 392-6238

www.bayequipmentco.com

Made from one piece of steel - not welded. Quality recognized world wide.

1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,675.00 pair2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $900.00 pair2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . $1,290.00 pair2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . . $1,475.00 pair

2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . $2,690.00 pair

3” thick x 7” wide x 72” long . . . . . . . . . . . . . . . . . . . . $3,040.00 pair3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,810.00 pair

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

3-1/2” thick x 8” wide x 60” long . . . . . . . . $3,875.00 pair3-1/2” thick x 8” wide x 72” long . . . . . . . . $4,300.00 pair3-1/2” thick x 8” wide x 96” long . . . . . . . . $5,425.00 pair

Also, 4”, 5”, 6” thick forks to 168” long.

Real Tuff BaleR&BaggeRtm

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$13,500

Real Tuff IndusTRIes

REAL TUFF INDUSTRIES

PO Box 693Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

Brownwood, Texas 76804Phone: 325-641-8300 Fax: 325-643-3243

. Easy to use

. Built of high quality materials and workmanship

. Heavy Duty to enable a broad spectrum of baling options

.Easily loads by conveyor or manual method

Most Popular Baler Sizes

12” x 16” x 36”12” x 16” x 32”11” x 17” x 36”8” x 18” x 36”

Real Ruff Baler Size

5” x 10” x 16” - Call For Price

4.0 cubic foot bale3.5 cubic foot bale3.9 cubic foot bale3.0 cubic foot bale0.4 cubic foot bale

Bale Size Bales per Hour

50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour

. .Custom baler’s can be manufactured to your specifications

Real Tuff Baler Dimensions & Specifications

2 - Hydraulic Cylinders are controlled by using a two spool valve

30 H.P. motor (220/440 volt 3 phase) starter not included

25 G.P.M. Pump

50 Gallon reservoir capacityOnly the highest quality industrial components are used

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty daysfrom placement of order. F.O.B. Brownwood.

03/08

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminumcans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Price: $12,997.00

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!Electric or Diesel, Manual or Automatic

• Easy to use

• Built of high quality materials and workmanship

• Heavy duty to enable a broad spectrum of baling options

• Easily loads by conveyor or manual method

real tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

like new condition. ‑ Item ID‑11467 ‑ Contact Michelle at 800‑315‑9950 x606Salem Hydraulic Unit ‑ 20‑hp, 1745 RPM, 1‑1/2 hp circulating motor with 1720 RPM, Denison pump ‑ Item ID‑10851 ‑ Contact Michelle at 800‑315‑9950 x606Wood Storage Silo ‑ Two available. 14’ diameter X 30’ cylinder size. Caged ladders & guardrail with toe bar. Metering bins with discharge augers. Internal “Flying dutchman” system. Wood or paper storage. ‑ Item ID‑10814 ‑ Contact Michelle at 800‑315‑9950 x606

MOuLDERSHigh Point Moulder ‑ 4‑Head Moulder, 6î Width Cap., Bottom‑left‑right‑top configuration, 230 volt/3 phase. Demo unit used for (2) shows! ‑ Item ID‑10790 ‑ Contact Michelle at 800‑315‑9950 x606

NOTCHERSHazeldine Double head notcher ‑ Has air Cylinders on it to push it through. Has econotool endexable teeth. Can be set for long or short stringers. Good Condition! Ready to go. Omish owned. ‑ Item ID‑11154 ‑ Contact Michelle at 800‑315‑9950 x606Scotchman Notcher/Grinder ‑ 2006 year, model GN 6. With contact roller and various belts. ‑ Item ID‑10698 ‑ Contact Michelle at 800‑315‑9950 x606Single Head Notcher ‑ 2000 year model manufactured by Morgan. Less than 50 hours. Gas engine is 20‑hp by Honda. ‑ Item ID‑10831 ‑ Contact Michelle at 800‑315‑9950 x606

PALLET MACHINERY1995 Gap 960 Nailer ‑ 3 & 4 stringer nailer. One pass top and bottom, runs on 110 power. Includes roll‑out and stacker. About 9 years old. ‑ Item ID‑11648 ‑ Contact Michelle at 800‑315‑9950 x606Bronco Model 2006 ‑ Pallet nailing system with roll‑out. Was used to build 48”x40”. New in 2005. One owner. ‑ Item ID‑10542 ‑ Contact Michelle at 800‑315‑9950 x606Bronco Pallet Machine ‑ Model 300 with stacker can do a maximum of 54” x 54” ‑ Item ID‑10678 ‑ Contact Michelle at 800‑315‑9950 x606Hawk Bandsaw Dismantler ‑ Powered by a 3‑phase, 15‑hp electric motor. Has a 64” table. Can be a one or two‑man machine. Large tires for extended blade life. Capacity is 50‑80 pallets per hour. ‑ Item ID‑11065 ‑ Contact Michelle at 800‑315‑9950 x606Press for Applying Mending Plates ‑ Pneumatic operated but is designed to easily switch over to hydraulics. Used in a business that specialized in non‑standard sized pallets. For long stringers, used this press to join shorter stringers together with a mending or truss plate. The frame is 9’ long and has 4 quick acting pneumatic cylinders to firmly hold the pieces to be joined in place. ‑ Item ID‑11068 ‑ Contact Michelle at 800‑315‑9950 x606Smart Bandsaw Dismantler ‑ 64” table. Two‑man operation. Less than 100 hours on a complete rebuild. Powered by a 15‑hp 3‑phase motor. Push button table height adjustment. ‑ Item ID‑11066 ‑ Contact Michelle at 800‑315‑9950 x606

PLANERSBaker Double Sided Planer ‑ Demo Model. Less than 10 hours, 15‑hp top and 15‑hp bottom. ‑ Item ID‑10746 ‑ Contact Michelle at 800‑315‑9950 x606Complete Planer Mill ‑ Yates American A20, 8 knife, belt driven with top and bottom profile; 54” McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. ‑ Item ID‑10994 ‑ Contact Michelle at 800‑315‑9950 x606

PORTABLE SAWMILL00 Frick Sawmill ‑ Comes with Frick edger. 371 edger. Can show operating. ‑ Item ID‑11574 ‑ Contact Michelle at 800‑315‑9950 x606

RECYCLING EquIPMENTGehrlinger ‑ Powered by a perkins diesel and has power‑shift transmission. Rated at 46,000 pounds and runs good. ‑ Item ID‑10781 ‑ Contact Michelle at 800‑315‑9950 x606McCloskey 512R Trommel Screen ‑ 5’X12’ trommel screen. Powered by a Cat 3054 diesel. ‑ Item ID‑10999 ‑ Contact Michelle at 800‑315‑9950 x606Powerscreen Mark II ‑ Portable screening plant with conveyor. ‑ Item ID‑11585 ‑ Contact Michelle at 800‑315‑9950 x606Remu MSU2‑300‑US Trommel Screen ‑ Powered by a Ford 5.95L, 6‑cylinder tubo diesel engine, 9’X6’ trommel screen, tandem axle, 4 conveyors, rear conveyor is a pivoting stacking conveyor. 1991 year model. ‑ Item


P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438www.multitekinc.com • [email protected]

Multitek firewood ProcessorsIncrease Your Productivity and Profitability

• Quality Equipment to Reduce your Labor Costs• Circular Saw or Bar & Chain Models• 7 Models to Choose From• Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

Precision 48” Chipper & ShakerItem ID: 11667Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

2002 Case 90XT SkidloaderItem ID: 11675Contact: MichellePh: 800-315-9950 x606

www.LBXonline.com

ID‑10998 ‑ Contact Michelle at 800‑315‑9950 x606ReTech 622 Screener ‑ 1994 year model, powered by John Deere diesel. Extra screens & brushes and in great shape. 1/2” and 3/8” screens. ‑ Item ID‑10762 ‑ Contact Michelle at 800‑315‑9950 x606Trelan DL18 Chipper ‑ 1988 year model with extra parts and blades. Runs well, comes with single axle dolly to move around. With Patu Model #40 Stroke de‑limber and slasher. $48,600.00 without the delimber/slasher. ‑ Item ID‑10600 ‑ Contact Michelle at 800‑315‑9950 x6062000 Morbark 3036 Whole Tree chipper ‑ Loader, Joystick controls

with A/C and heat. New drum and bearings. serial# is 4661100‑3036 ‑ Item ID‑11363 ‑ Contact Daren at 800‑315‑9950 x6032001 Morbark 3036 ‑ Whole tree chipper, powered by a 325‑hp Cat diesel engine; has self‑loading grapple; one year old heavy duty drum and runs great. ‑ Item ID‑11587 ‑ Contact Michelle at 800‑315‑9950 x6062003 ROTOCHOPPER CP118, 80hp, 790 hours, CAT diesel engine, fixed hammers, one‑pass re‑grind & coloring system. ‑ Item ID‑11287 ‑ Contact Daren at 800‑315‑9950 x6032004 Bandit Beast ‑ Powered by a V12 800‑hp Cat diesel engine. 2300 hours. Photos coming soon. ‑ Item ID‑11233 ‑

Contact Michelle at 800‑315‑9950 x6062006 Morbark 18 chipper ‑ 180hp Cat, 160 hours, tandem axle. 10,000lbs, curbside jack, 65”x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. ‑ Item ID‑11355 ‑ Contact Daren at 800‑315‑9950 x603Bron 400 Mulching Machine with Denis Cimaf Planer Head ‑ 2007 year model, 350‑hp Cat diesel engine, 1080 hours, in excellent condition. No major work done, nothing needed. 20 ton hyrdaulic winch, pressurized cab, tinted glass is lexan, 32” tracks, 38,000 pounds, joystick, pilot controlled, AM/FM radio, heat and A/C, wired for back‑up camera but needs new monitor, Denis Cimaf planer head attachment, 3000rpm rotor speed, same as gyrotrack head, dual stage motors, variable displacement motors in the head, newest technology in mulching head, winch operates off joystick in cab, has its own hydraulic cooling system with reversing fan, Denis 250ex brush cutter head ‑ Item ID‑11666 ‑ Contact Michelle at 800‑315‑9950 x606CBI Magnum Force 4800 ‑ 2001 year model, 3000 hours, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000‑hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hours on them. ‑ Item ID‑10577 ‑ Contact Michelle at 800‑315‑9950 x606Duratech HD‑8 ‑ This tubgrinder has

an 8’ tub with a tub extension. It has just over 700 hours. It is powered by a 125‑hp John Deere diesel engine. It has new hammers. 1994 year model. Tub extension is 10’3” wide and bolted on, so it can easily be removed for shipping. ‑ Item ID‑10804 ‑ Contact Michelle at 800‑315‑9950 x606Duratech IG‑10 Tub Grinder ‑ Powered by a 300‑hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. ‑ Item ID‑11320 ‑ Contact Michelle at 800‑315‑9950 x606Fecon 3250 Horizontal Grinder ‑ 1995 year model, powered by a Cat 3306. Includes remote control. Has only 1000 hours. ‑ Item ID‑10798 ‑ Contact Michelle at 800‑315‑9950 x606Fecon MZA 2500 ‑ 2004 year model with 400 hours. Cat diesel engine, 250‑hp. S/N 2S000692164 ‑ Item ID‑10799 ‑ Contact Michelle at 800‑315‑9950 x606Fecon MZA2500 ‑ Portable, horizontal grinder with Cat 3208 250‑hp diesel engine. Machine has remote control and only 2441 hours. Was a one owner machine. ‑ Item ID‑10801 ‑ Contact Michelle at 800‑315‑9950 x606Haybuster H1000 PTO Tub Grinder ‑ Tub has been re‑inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. ‑ Item ID‑11554 ‑ Contact Michelle at 800‑315‑9950 x606Haybuster IG‑8 Tub Grinder ‑ Powered by a 110‑hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1‑1/2” screen. 8’ discharge conveyor.


www.corleymfg.com • [email protected]

CorleY mfg

now one Phone Puts You in Touch with tHe single source

for all your sawmill needs!CORLEY SAwMILL MACHINERY

TYRONE BERRY CARRIAgE DRIvESLEwIS CONTROLS OPTIMIZATION

Carriage Linear & Set ShaftLewis Controls “electronics for sawmills by sawmillers”tyrone-Berry carriage Drives & Parts • Headrig slabbers

log turners • Bandmills & linebar resaw systems Board & Gang Edgers • trimmers

the most complete Line of sawmill machinery since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

Call (423) 698-0284

Ask for— LeeRay(218) 390-1004

We have over 5 acres

of used equipment &

miscellaneous parts.

Call today!

750 East Hill Rd. Ludlow, VT 05149 • 802-228-7293 Fax: 802-228-7293E-mail: [email protected] • Website: www.built-rite.com

AlwAys A step AheAd

By adding a hydraulic 6-way wedge to the front post, there are now 4 different wedge choices. This allows the

operator to size firewood exactly as the customer wants it!

6-way on front, 4-way and 10-way on back

10-way in action

Attention!! introducing the new Built-Rite tRiPLe Multi-wedge

800-757-2520“BuiLt-Rite” MFG. CoRP.

1987 Hyster 25,000 lb. ForkliftItem ID#: 11672Contact: Michelle800-315-9950 Ext. 606SEE PICTUrE AT LBXonline.com

Frick 8x48 Edger CombinationItem ID#: 11671Contact: Michelle800-315-9950 Ext. 606SEE PICTUrE AT LBXonline.com

‑ Item ID‑11426 ‑ Contact Michelle at 800‑315‑9950 x606Morbark 1050 Tub Grinder ‑ 1993 Morbark 1050 Tub Grinder, 4100 hours on a 3106 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 ‑ 4x6 inch screens, 1 ‑ 2 inch screen, and 1 ‑ 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed control. ‑ Item ID‑11312 ‑ Contact Daren at 800‑315‑9950 x603Morbark 1200 Tub Grinder ‑ 1993 year model; rebuilt by Morbark in 1999. Equipped with grapple, 650‑hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider‑longer conveyor. ‑ Item ID‑10773 ‑ Contact Michelle at 800‑315‑9950 x606Morbark 1200 tub grinder ‑ 1994 year model with approximately 2500 hours.

750‑hp diesel. It needs a little TLC. Has cab and a Morlift 350 grapple. Located in Michigan. ‑ Item ID‑11420 ‑ Contact Michelle at 800‑315‑9950 x606Morbark 1200 Tub Grinder ‑ Powered by a Cat 3412 650‑hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. ‑ Item ID‑11660 ‑ Contact Michelle at 800‑315‑9950 x606Morbark 2400XL 20” Drum Chipper with Grapple ‑ 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP turbo diesel engine, 2655 hours, hydraulic down riggers, tung jack and chute turner, dual feed rollers. ‑ Item ID‑11678 ‑ Contact Daren at 800‑315‑9950 x603Morbark 2600 Portable Grinder ‑ 2007 Year model. 167 hours. Portable wood hog. Powered by a 250‑hp Cat diesel engine. Can choose from a 3”x5” rectangular screen or a 4” octagon screen. This machine is $220,000 new. ‑ Item ID‑10743 ‑ Contact Michelle at

800‑315‑9950 x606Morbark Chip Harvester ‑ 1985 Year model. 65 hours since rebuild. 575‑hp Cummins diesel engine. 3 Sets of knives, 1 set is new. Can process up to a 26” tree. Tractor is also available to pull the chipper. Can process a 20” tree at 1 foot per minute. Operator cab and self feeding grapple. Includes owners manual, parts manual and engine repair manual. ‑ Item ID‑11374 ‑ Contact Michelle at 800‑315‑9950 x606Morbark N‑viro Mulch 2000 ‑ 1994 year model. Powered by a 21‑hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. ‑ Item ID‑10551 ‑ Contact Michelle at

800‑315‑9950 x606Morbark Stack Trac ‑ Model 2000, S/N 316. Track mounted. ‑ Item ID‑10687 ‑ Contact Michelle at 800‑315‑9950 x606Morbark Tree Shear ‑ 20” Morbark SB52 Superbuncher tree shear. ‑ Item ID‑11468 ‑ Contact Michelle at 800‑315‑9950 x606Rotochopper MC166 ‑ 1998 year model powered by a new Cat 3406. New feed conveyor, new & reinforced underlayment & superstructure for feed conveyor; new b elts for both exit conveyors; magnetic head pulley; fifth wheel hitch; screens. This machine has 12361 total hours. But only 3500 on the new motor. It does have the original coloring system included. The color system has not been used in a


CAT D4H-TSKWilling to consider offers.

Item ID: 11003Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

Make oFFer

Trelan DL18 Whole Tree ChipperItem ID: 11292Contact: Michelle Ph: 800-315-9950 x606www.LBXonline.com

Price reducedShop Built Shaving Mill30” x 96” Box with (2) 50 hp electric motors


Shop Built Shaving Mill15” x 72” Box with 30 hp electric motor


couple of years so it may need some maintance. Machine is still in use. ‑ Item ID‑11232 ‑ Contact Michelle at 800‑315‑9950 x606UNIVERSAL REFINER PDR96 SUPER CONTENDER ‑ 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR‑96‑12 ‑ Item ID‑11440 ‑ Contact Daren at 800‑315‑9950 x603Bron 400 Mulching Machine with Denis Cimaf Planer Head ‑ 2007 year model, 350‑hp Cat diesel engine, 1080 hours, in excellent condition. No major work done, nothing needed. 20 ton hyrdaulic winch, pressurized cab, tinted glass is lexan, 32” tracks, 38,000 pounds, joystick, pilot controlled, AM/FM radio, heat and A/C, wired for back‑up camera but needs new monitor, Denis Cimaf planer head attachment, 3000rpm rotor speed, same as gyrotrack head, dual stage motors,

variable displacement motors in the head, newest technology in mulching head, winch operates off joystick in cab, has its own hydraulic cooling system with reversing fan, Denis 250ex brush cutter head ‑ Item ID‑11666 ‑ Contact Michelle at 800‑315‑9950 x606


www.LBXonline.comRESAWS

42” Mcdonough Band Resaw ‑ Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. ‑ Item ID‑10477 ‑ Contact Michelle at 800‑315‑9950 x606Brewco B‑1600 BRAND NEW!!! Brewco B‑1600 has never been plugged in. Owner purchased a much larger machine ‑ Item ID‑11249 ‑ Contact Michelle at 800‑315‑9950 x6062000 Brewco B‑1600 Big Band Resaw with runaround system and 5‑way sparator. Cab with A/C and heat, Infeed rollcase; w/ (2) popup transfers; sway board seperator system; w/

20hp hydraulic power pack; and a 4’x4’ control cab, 5 BOXS OF SAW BLADES USES 244” 1 1/2” WIDE .065 AND A NEW FEED BELT NEVER BEEN INSTALLED. ‑ Item ID‑10865 ‑ Contact Michelle at 800‑315‑9950 x606Kent Resaw ‑ 1‑1/4” bands, variable speed gear box. Extra wheels and 1/2 box of bands. 10’ return. 2001 year model. ‑ Item ID‑10897 ‑ Contact Michelle at 800‑315‑9950 x606Morgan Resaw ‑ 1995 year model. 15‑hp, 3‑phase with return belt ‑ Item

ID‑10616 ‑ Contact Michelle at 800‑315‑9950 x606

SAW GRINDERS & STRETCHERSArmstrong Truesizer Dual Side Grinder ‑ Automatic dual side grinder for carbide or stellite tipped circle saw blades such as trim saws, gang saws etc. Requires 220 volt, single phase electricity. Features adjustable stoke air cylinder to rotate blade, dual digital micrometers, ampmeter and tooth counter. ‑ Item ID‑11635 ‑ Contact

OPTIMIZERCOMPACT!

www.crosbysawmillmachines.com

OPTIMIZERCOMPACT!

www.crosbysawmillmachines.com

Positioned at end of edger

Positioned on crossbars

The First True Hardwood OptimizerGreat Deals on both new and used Crosby Machines.

Call us Today!(318) 247-8918

Setting Standards Since 1933

www.crosbymachines.com


Loaders• skidders• Delimbers• Log Trucks• Firewood Processors• sawmill equipment• And much more• ….

FerNwood cAPiTALwww.fernwoodcapital.com

888-241-8636

For additional information:Doug Bullock888-241-8636

[email protected]

equipment Leasing specialists

in the Forestry industry

over 50 years combined Leasing

experience

introducinG

JOCKEY GRINDER OWNERS!!!are wear plates costing you too much money?

“EZ-SLIDE” TOOTH STOP & TOOTH REST

This Patented, Spring Loaded Design• Allows for EZ sliding of the grinding wheel to the tooth. • Eliminates the sticky divots of the old style wear plates.• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

the eZ-sLide has saved many happy customers time and money.Call 1-800-582-0470 TODAY

Our sawyers say they will not go back to the old style parts.Joe NowakLumberjack HardwoodsMenominee, Michigan

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?Kevin Mueller Mueller Brothers TimberOld Monroe, Missouri

in stock for:F and 2-1/2 style saws

B and 3 style coming soon

the secret:the parts that touch the tooth don’t move!

When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure to Ask For our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

here’s what You get with every b.h. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

b.h. Payne & Company, inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

Michelle at 800‑315‑9950 x606SAWMILL

1992 C‑2000 Grinder w/ 150kw Kohler Power Pack ‑ 56” max stroke x 66î Hopper. Top of Hopper is 66” x 90”. 60Hp Drive Unit w/ 5Hp hyd system Twin Ram cyl. 2”0 Screen, 16” x9’‑0” trans. conveyor to 16” x 24’ inclined S/s discharge conveyor w/ mag head. Pivoting. (Drive Gearbox, hyd pump and hoses, all new). Completely operational and running. This machine has Lots of extra parts. Multiple screens 2” and 3/4”, Machine does have a magnetic head on the conveyor. 1370 hrs. ‑ Item ID‑11531 ‑ Contact Daren at 800‑315‑9950 x60372” CSI R72 Circle Saw ‑ Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500.00. Was over $40,000 new, 2 years ago. ‑ Item ID‑10767 ‑ Contact Michelle at 800‑315‑9950 x606Armstrong #4 ‑ Bandsaw Sharperner ‑ complete sharpener for left hand blades from 6” to 14” wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features “Sidewinder” spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4” or narrower bands with slight modification. ‑ Item ID‑11618 ‑ Contact Michelle at 800‑315‑9950 x606Armstrong Auto Leveler ‑ Heavy duty; rolls saws up to 16” wide and 65’ long at 50’ per minute. Featurs a built in memory recalls settings for different


SURPLUSCENTER

Surplus Center offers huge savings on industrial products, from factorysurplus purchases to our distributorships with many manufacturers.

Buying and Selling Industrial Surplus Since 1933Ask For Our Free Catalog!1-800-488-3407

www.surpluscenter.com1015 West “O” Street • Lincoln, NE 68528

Please mention Lumberman’s Exchange when you respond.

Motors & GearmotorsAC / DC

Right angle, base & inline mount

Gear ReducersMotor flange &

shaft to shaft mount5:1 to 60:1 Ratio

Roller ChainSprockets &

V-Belt Pulleys25 to 80 pitch chain & sprockets A & B belt

single & double groove pulleys

V-BeltsA & B sizesClassic &

notched styles

HydraulicsPumps, motors,

cylinders &control valves

EnginesGas & diesel

WheelsPneumatic & utility

CastersSwivel & rigid

LEApril2009:Lumberman's Exchange 3/18/09 2:16 PM Page 1

saws, settings are made through a touch screen control panel. ‑ Item ID‑11617 ‑ Contact Michelle at 800‑315‑9950 x606Baker 3630E Band Sawmill ‑ 2001 year model. 20’ Stationary unit powered by a 30‑hp electric motor, 7.5‑hp hydraulic unit. Includes electric set works and the control & hook‑up for a log deck. Has been completely shop checked. Can take up to a 36” diameter log. ‑ Item ID‑10566 ‑ Contact Michelle at 800‑315‑9950 x606Corley Sawmill ‑ Model 385 Sawmill mounted on trailer frame ‑ Item ID‑10676 ‑ Contact Michelle at 800‑315‑9950 x606Frick Sawmill ‑ 00 model powered by a 100‑hp Cummins diesel engine. 2 sawblades, 1 cane hook, log turner with hydraulics, fuel tank with stand and toolbox. ‑ Item ID‑10844 ‑ Contact Michelle at 800‑315‑9950 x606Holtec F/SHK Package Saw ‑ 16’ fixed lumber frame. Hydraulic bar system, 15‑hp, 460v, 3 phase, cutting station moves on track with rack & pinion wheel, includes parts manual, log foundation plans, spare bar and 3 carbide chains. ‑ Item ID‑11472 ‑ Contact Michelle at 800‑315‑9950 x606KM‑16 Trimsaw ‑ Trimsaw ‑ Item ID‑11670 ‑ Contact Michelle at 800‑315‑9950 x606Lumber Transfer ‑ Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain ‑ Item ID‑11669 ‑ Contact Michelle at 800‑315‑9950 x606Meadows Portable Mill ‑ 56” sawblade, setworks, new wheels on carriage, includes 4 extra blades (2 need work). Very good condition. $6,000 worth of work to setworks and carriage. Pulley system. ‑ Item ID‑10895 ‑ Contact Michelle at 800‑315‑9950 x606Morgan Deduster ‑ Call with any questions. ‑ Item ID‑10680 ‑ Contact Michelle at 800‑315‑9950 x606SB‑420 Milling Machine for Round Log Home Timbers ‑ This is a new machine. Technical data: width 8.25”; height of head machine 78.75”; height of line 17.75”; width of the line 57.75”; total width 82.5”; total height 92.5”; length of line 68.75’; maximum diameter of the timber 16.5”; maximum diameter of the log 23.6”; minimum diameter of the timber 3.9”; maximum legnth of timber 29.5’; minimum legnth of timber 4.9’; milling cutter motor 2x13kw/2800 turn/min (17hp each); drive motor 0.75kw/1400 turn/minimum (1 hp); boring motor 2x 0.75kw/2800turn/minimum (1hp each); carriage motor 0.75kw/1400 turn/minimum (1hp); belt transporter motor 0.37kw/1400 turn/minimum (0.5hp); hydraulic pump motor 4kw/1400 turn/minimum (5hp); total power 33 kw (44hp); speed of the movement 0‑25 m/min (0‑82 ft/min); speed of the rotating the timber 0‑300 turn/min; 2 hydraulic lift for the timber; hydraulic clamping of the logs. This unit is produced in Slovenia and price does not include shipping. ‑ Item ID‑11658 ‑ Contact Daren at 800‑315‑9950 x603Schurman Dual Guide Grinder ‑ model 88 guide grinder for facing babbitt guide pads on thin kerf circular gangs. This model faces both sides at the same time and is adustable for different thickness pads ‑ Item ID‑11633 ‑ Contact Michelle at 800‑315‑9950 x606Vertical Band Head‑rig ‑ Without feedworks. Mounted on Frick Mill with a 30” wheel. Band legnth is 20’1”. 1‑1/2” band. Hydraulic crank adjustment and a 15’ carriage. Band has 1800 pounds of pressure. ‑ Item ID‑11644 ‑ Contact Michelle at 800‑315‑9950 x606Vollmer Carbide Saw Sharpener ‑ model CHC 20H face and top sharpener for carbide tipped circular saw blade up to 32 inches in diameter and tooth spaces up to 4‑1/2 inches. ‑ Item ID‑11634 ‑ Contact Michelle at 800‑315‑9950 x606Windham Sawmill ‑ Portable trailer mounted, 36” head carriage. Air over hydraulic controls, Tyron Berry carriage, chain type log turner, log deck and belt conveyor. ‑ Item ID‑10941 ‑ Contact Michelle at 800‑315‑9950 x6061991 Woodmizer LT‑40, Cuts 36” diameter log. 25‑hp Kohler gas engine. Blade sharpener and extra blades. Less than 2300 hours on machine but engine is new. ‑ Item ID‑10723 ‑ Contact Michelle at 800‑315‑9950 x606Woodmizer LT‑40 ‑ 20‑hp Electric motor. ‑ Item ID‑10816 ‑ Contact Michelle at 800‑315‑9950 x606


Shop Built Firewood ProcessorItem ID: 11680Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Valmet 546HItem ID: 10725Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Price reduced

SHAVING EquIPMENTShaving Mill (shop built) ‑ Stationary shaving mill with conveyor and blower. Powered by 2 50‑hp electric 3‑phase motors. Box does not move, planer heads do below the box. Comes with all electrical. Estimate 18 yards per hour. Box is 8’ x 30”. It is $4000 extra to get the hydraulic unit included. ‑ Item ID‑11677 ‑ Contact Michelle at 800‑315‑9950 x606Shop built Shaving Mill ‑ The box is 15 inches wide by 6 feet long. An estimate on production is 360 yards in a 5 day week, working less than 8 hours a day. The heads are 15 inches, there are 2

that are run by the one 30 hp motor. Each head has 6 knives. Conveyor is not included. ‑ Item ID‑11646 ‑ Contact Daren at 800‑315‑9950 x603

STACKERS, SORTERS, TILTHOISTS, & uNSCRAMBLERS

HMC Unscrambler ‑ HMC 4‑chain unscramber with chain lugs, electric drive and steel panning between strands. ‑ Item ID‑10717 ‑ Contact Michelle at 800‑315‑9950 x606Pendu Unscrambler ‑ Call for more information. ‑ Item ID‑10677 ‑ Contact Michelle at 800‑315‑9950 x606

STORAGE RACKSNation's #1 largest source for used &

refurb. racks. Pallet Racks ‑ Cantilever ‑ Pipe & Lumber Racks & More. All sizes in‑stock & priced 30‑80% less than new. Mention this ad and save. Nationwide Sales. 800‑598‑5532 | www.sjf.com

TABLE SAWS, RIP SAWS, TRIM SAWS & CuT-OFF SAWS”

Circle Saw ‑ 52” saw with Meadows Edger ‑ Item ID‑10707 ‑ Contact Michelle at 800‑315‑9950 x606Cut‑off saw ‑ Call with questions. ‑ Item ID‑10901 ‑ Contact Michelle at 800‑315‑9950 x606Dawson 2‑Saw Air Trim Saw ‑ Trimmer cuts cants with operator sliding material left or right on rollers. It has manual stops, saws are foot operated. Includes a waste belt conveyor below. ‑ Item ID‑10712 ‑ Contact Michelle at

800‑315‑9950 x606Fastline Band Saw ‑ Triple Head band saw, powered by a 20‑hp motor with air actuated height adjustment. ‑ Item ID‑10675 ‑ Contact Michelle at 800‑315‑9950 x606Newman Drop Saw Trimmer ‑ Has 7 adjustable saws. Has built in scrap conveyor. Includes all motor and starters. ‑ Item ID‑10714 ‑ Contact Michelle at 800‑315‑9950 x606Newman Push Button Trim Saw ‑ 2‑saw trimmer with all motors and starters. 6’‑16’ material 8” thick, 24” carbide saws, selector switch auto set, feed chain w/lugs adjustable electric speed. Machine is 17’L x 5’H x 7’W and less than 8000 pounds. Is completely electric, no hydraulics. Can process 8” wide. 3 phase, 230/460 volt. ‑ Item


ExplorE Expo 2009 for opportunitiesto advance your operations and gear

up to win as the markets recover.

Register online at sfpaexpo.com/attendexpo

Forest Products Machinery &

Equipment Exposition

Coming June 11- 13New Orleans

Morial Convention Center

Ma

nfa

ctu

re Y

ou

r F

utu

re S

uccess!

Contact Eric Gee, Show Director 504.443.4464 ext: 214 • [email protected] en

joy

the

foo

d &

fun

!

com

e fo

r th

e sh

ow

...

2009Midwest ForestIndustry Show

Don’t miss this opportunity to see the newest and most advanced machinery, equipment, and technology in the forest products industry. Pre-show activity includes a industry tour of 3 mills June 25.

For attendee or exhibitor information contact the show sponsor, Missouri Forest Products Association 573-634-3252 or visit www.moforest.org

June 26-278am-4pm

Show Me CenterCape Girardeau, MO

ID‑10716 ‑ Contact Michelle at 800‑315‑9950 x606Sanborn Drop Saw Trimmer ‑ Trims 6’‑16’ material with zero saw, (7) saw trimmer each unit equipped with saw and motor. Right hand trimmer, operator stands on left and material passes on his right. Some spare saws included. Completely rewired. ‑ Item ID‑10715 ‑ Contact Michelle at 800‑315‑9950 x606Scotchman Cold Saw ‑ 2006 year model, CP0350. 5‑hp with material stop. ‑ Item ID‑10697 ‑ Contact Michelle at 800‑315‑9950 x606Slab Saw ‑ New Slab Saw by Precision Mills. 1 blade. ‑ Item ID‑11643 ‑ Contact Michelle at 800‑315‑9950 x606

TRANSFER DECKS3 Channel Live Deck ‑ About 25’ long ‑ Item ID‑10896 ‑ Contact Michelle at 800‑315‑9950 x606

TRIMMERSDawson Brothers Double End Trimmer ‑ Comes with gas and electric motors. 30’ waste conveyor; air hoses and regulators included. ‑ Item ID‑10748 ‑ Contact Michelle at 800‑315‑9950 x606

TuB GRINDERS1996 Diamond Z Tub Grinder model 1460BL. Approx. 4500 hours. 800HP Cat Engine. VERY NICE MACHINE. Call for additional information and for photos. $179,000 – Trades Considered. Contact CW Mill Equipment at 800.743.3491 or email [email protected]. Additional equipment on www.hogzilla.com. 2001 HogZilla Tub Grinder model

TCII‑1564P. 1000HP Cat Engine. 21” Torque Converter. NICE MACHINE! Call for further details and for photos. $295,000. Contact CW Mill Equipment at 800.743.3491 or email [email protected]. Additional equipment on www.hogzilla.com.

VEHICLES-TRuCK/TRAILER/VAN1985 Wilson 20ton Tilt Deck Trailer ‑ Wisconsin Tilt Deck Equipment Trailer, excellent deck, 90% tires, air brakes, ‑ Item ID‑11591 ‑ Contact Daren at 800‑315‑9950 x6031989 International Truck with Barko Loader ‑ Model F‑2574. 228” wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint. No leaks, clean and dry 1998 Barko Loader. ‑ Item ID‑11655 ‑ Contact Michelle at 800‑315‑9950 x6061989 International with Hood 7000 Loader ‑ Has a 350 Cummins 9 speed. Tandem axle. Single bunk log bed. About 700,000 miles. Hood loader is a 1993. ‑ Item ID‑11674 ‑ Contact Michelle at 800‑315‑9950 x6061996 Freightliner w/Prentice 120C Knuckleboom ‑ Knuckleboom mounted behind the cab, Cat 10 speed ‑ Item ID‑11593 ‑ Contact Michelle at 800‑315‑9950 x6061996 Peterbilt Model 377 ‑ 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. bed sides are 60”. ‑ Item ID‑11597 ‑

Contact Michelle at 800‑315‑9950 x6061997 Mack CH613 w/1997 Sta‑Lite Log Loader Trailer ‑ E7 Mack Engine 454‑hp; 354,000 miles; 18‑speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta‑Lite 45 ft x 96” log loader trailer ‑ Item ID‑11588 ‑ Contact Daren at 800‑315‑9950 x6031998 Freightliner ‑ Has daycab, 470‑hp 12.7 liter Detroit. 490,000 miles. Includes a 45’ open top trailer with swinging gate. ‑ Item ID‑10836 ‑ Contact Michelle at 800‑315‑9950 x6061998 Mack CL713 w/ a 1998 Serco Ldr, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Pkg, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. ‑ Item ID‑11529 ‑ Daren 800‑315‑9950 x6031999 MACK CL713 ‑ 1999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E‑7 Mack @ 460 hp. , 8LL trans., cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22’ deck, 22.5 tires, aluminum wheels, hub piloted ‑ Item ID‑11530 ‑ Contact Daren at 800‑315‑9950 x603

1999 Sterling Log Truck ‑ 550,000 miles. Log bunks; ten wheeler; Prentice 120 log loader. ‑ Item ID‑11552 ‑ Contact Michelle at 800‑315‑9950 x60620 Cubic Yard Containers ‑ Fit on the 1996 GMC topkick listed (id#11101). Can be purchased with or without the GMC. All must go together; not selling separately. ‑ Item ID‑11102 ‑ Contact Michelle at 800‑315‑9950 x6062003 Mack CH613 ‑ With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning. 210,000 miles. Good tires. ‑ Item ID‑11087 ‑ Contact Michelle at 800‑315‑9950 x6062003 Volvo Model 660 ‑ This truck has been converted to a Toter Truck for pulling a 38 ft fifth wheel, has a 475 hp isx cummins deisel with 10 speed automatic trans. bunk bed and referigator,air ride fifth wheel, and much. much. more. ‑ Item ID‑11596 ‑ Contact Michelle at 800‑315‑9950 x6062006 ITI Chip Van ‑ 45x102, air ride suspension with automatic lift rear axle, 8 polished aluminum rims ‑ 24.5 tires, 1/2 solid tail gates ‑‑ air lock, pull back mesh tarps, super clean trailers. Straight van. 9,461 pounds empty. Holds 112‑1/2 cubic yards. ‑ Item ID‑11516 ‑ Contact Michelle at 800‑315‑9950 x6062006 ITI Chip Van ‑ 45x102, air ride suspension with automatic lift rear axle, 8 polished aluminum rims ‑ 24.5


roW eleCTriCal eQUiPMenT, inC.

YoUr soUrCe For UseD, reConDiTioneD: • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters • Synchronous Motors • Engine-Generator Sets • Safety Switches • DC Motors • Transformers, Single Phase • Phase Convertors

Fax to: P.O. Box 2812 800-248-4479 419-244-8887 Toledo, Ohio 43606 419-248-4479

We ansWer THe PHone 24 HoUrs • We BUY UseD eLeCtrICaL tires, 1/2 solid tail gates ‑ Item ID‑11517 ‑ Contact Michelle at 800‑315‑9950 x6062007 Kodiak 4500 4‑wheel Drive ‑ 10,000 miles. DuraMax engine, 12’ stake dump, exhaust brake, heated mirrors and A/C. Pre‑emissions 13‑mpg. Looks and runs like new. $62,000 new. ‑ Item ID‑11496 ‑ Contact Michelle at 800‑315‑9950 x606

25’ Deck trailer with dove tail ‑ 25’ deck trailer with dove tail. Photos coming soon. Is a 2007. ‑ Item ID‑11676 ‑ Contact Michelle at 800‑315‑9950 x606Great Lake Log Jammer ‑ 1983 year. LOG JAMMER IS A PRENTICE S/N# 90P22414 MODEL# F90, STICK ON JAMMER 20’ ‑ Item ID‑11592 ‑ Contact Daren at 800‑315‑9950 x603Hobbs End Dump ‑ 1975 year model. 26

feet long, 5.5 foot high sides. Cylinder weeps and tires are not good. ‑ Item ID‑11085 ‑ Contact Michelle at 800‑315‑9950 x606Johnson Short Wood Pulp Trailer ‑ 2 short wood pup trailers; tire size 11R 22.5; good condition; price is $6,000 each. ‑ Item ID‑11657 ‑ Contact Daren at 800‑315‑9950 x603Kenworth W900B Logging Truck ‑

2000 year model truck powered by a Cat 3406E, ‑ Item ID‑11478 ‑ Contact Michelle at 800‑315‑9950 x606Pup Trailer ‑ 3 axle load hog pup trailer. Rebuilt in 2005. ‑ Item ID‑11416 ‑ Contact Michelle at 800‑315‑9950 x606Wisconsin Tiltbed Trailer ‑ 1973 year model. Two axle, fifth wheel pull, ex‑forest service. Has good tires. ‑ Item ID‑11084 ‑ Michelle at 800‑315‑9950 x606

THE LuMBErMAn’S EXCHAnGEPost Office Box 1916Columbia, Tennessee 38402

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper? Why are our customers so loyal?

Intelligent Design

Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and backed up with . . . World class factory service and support.

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“Perfect In One Pass” .

217 West Street St. Martin, MN 56376

608-452-3651 320-548-3586

http://www.rotochopper.com [email protected]

Grinding Ag Biomass Grinding Forestry Biomass

Electric Diesel



Intelligent Design






608-452-3651 320-548-3586



Electric Diesel



Intelligent Design






608-452-3651 320-548-3586



Electric Diesel

lbx online magazine june 09

Documents