layout grocery backroom
TRANSCRIPT
EQUIPMENT INFORMATION SHEET Department Name Link to PDF file
UTILITY INFORMATION
EXT NEW I F C ELECTRICAL MECHANICAL: SUPPLY MECHANICAL: WASTESC4260-1-6 Stationary compactor Sebright VND CM VND Refer to Architectural and
Engineering documents. 5'x5' yellow striping on floor required.
See Manuf. Specifications
Date created: 2/18/2013
Date revised: 7/18/2016
Cell library: layout_backrooms
Cell name(s): SAFB111
Special CAD Instructions:
ITEM NUMBER: FB111
REMARKSFB111
EQUIPMENT CELL INFORMATION
Back to index Notes and Abbreviations
ITEM #QTY
MODEL # ITEM DESCRIPTION MANUFACTURER
CONTRACTOR INFORMATION
NOTE: TRASH SETUP: COMPACTOR MODEL: SC4260-1-6, 22' SKID, STANDARD CABLE 1.UNDERSTRUCTURE, 3/8" THICK HEAVY DUTY MAIN RAILS, AND SEALED REAR ACCESS COVER / REINFORCED BREAKER BAR WITH LONG HINGED RETAINER TEETH COLOR: DARK BROWN / PLEASE VERIFY2.460 VOLT 3 PHASE / PLEASE VERIFY3.10 HP MOTOR, 44 GALLON RESERVOIR, ALL WEATHER OIL, 15' POWER CABLE 4./ SEALTITEPRESSURE GAUGE NEAR CONTROLS5.#11 GAUGE BREAKAWAY REAR BREAK AWAY CHUTE6.CONTAINER GUIDE RAILS: 4" TALL X 10' LONG WITH STOPS7.POWER EXHAUST FAN: MODEL 4YC69 INSTALLED BY SEBRIGHT, 8.ELECTRICAL CONDUIT BY OTHERS / 115 VOLT / SINGLE PHASE/ 1/3 HP FANONE PLUS MONITORING SYSTEM INSTALLED - 120 VOLT SINGLE PHASE, 9.PHONE LINES AND FINAL HOOK-UP BY OTHERSSET FULL LIGHT AT 1600 PSI10.SEBRIGHT TO ADD INTERLOCK TO EXISTING DOOR ASSEMBLY11.ELECTRONIC REGEN TO SPEED UP CYCLE TIME12.
3/8" THICK STEEL WEAR PLATES BY OTHERS
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 1 OF 8
ASHEET SIZE:1:44SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
CHUTE SUPPORT FRAME
EXHAUST FAN(WIRED BY OTHERS)
OUTSIDE WALL COLLAR BY SEBRIGHT
POWER UNIT
ELECTRICAL DISCONNECT BY OTHERS
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 2 OF 8
ASHEET SIZE:1:40SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
CHUTE SUPPORT FRAME
CONTAINER GUIDE RAILS WITH STOPS BY SEBRIGHT
POWER UNIT
ELECTRICAL DISCONNECT BY OTHERS
OUTSIDE WALL COLLAR BY SEBRIGHT
EXHAUST FAN(WIRED BY OTHERS)
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 3 OF 8
ASHEET SIZE:1:32SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
ONE PLUS MONITORING SYSTEM
CONTROL STATION WITH PRESSURE GAUGE
SEBRIGHT TO ADD INTERLOCK TO EXISTING DOOR ASSEMBLY
DRAWING APPROVALPLEASE SIGN AND RETURN ONE COPY TO SEBRIGHT PRODUCTS INC.APPROVED BY: COMPANY NAME: DATE: FINAL ELECTRICAL POWER CONNECTION MUST BE SUPPLIED BYOTHERS FOR TESTING IF SEBRIGHT'S DO THE INSTALLATION, OR ANADDITIONAL STARTUP CHARGE MAY BE APPLIED FOR A RETURN TRIP.
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 4 OF 8
ASHEET SIZE:1:24SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
42" MINIMUM FALLAWAY ZONE
46"61" 48"
76"
42"
23'-10"
286"
96"
6"
30'360"
24"
48"
24"
CONTAINER GUIDE RAILS WITH STOPS
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 5 OF 8
ASHEET SIZE:1:48SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
96"
1" GAP FOR GASKET
48 1/8"
46"
48"
35° 42"
93 1/4"
44"
12"
22'-10"
274"
101 13/16"
23'-10"
286"
CONTROL STATION
#11 GAUGE BREAKAWAY CHUTE
CHUTE SUPPORT FRAMEDISCONNECTBY OTHERS
EXHAUST FAN(WIRED BY OTHERS)
EXPANDED METAL FRAME
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 6 OF 8
ASHEET SIZE:1:36SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
87 3/16"
98"
46"
42"
44"
93 1/4"
DISCONNECTBY OTHERS
CHUTE SUPPORT FRAME
UPPER CHUTE SECTION WITH 4" CHANNEL AND EXHAUST FAN
CONTAINER GUIDE RAILS
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 7 OF 8
ASHEET SIZE:1:32SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:SALES LAYOUT FOR MEIJER
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME:
3/8" THICK STEEL WEAR PLATES BY OTHERS
30'
360" 6"
24"
48"
24"
8'
96"
30'-6"366"
42"
24" 21"
21"
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose is completed.
DRAWING LEGEND - CONFIDENTIALTOLERANCE
(UNLESS SPECIFIED)FRACTIONS 1/16"
.XXXX .0625"ANGLES 0 30'
DATE: DRAWN BY: PF SHEET 8 OF 8
ASHEET SIZE:1:64SCALE:
WEIGHT (LBS):
MATERIAL: SER. NO.:
DWG #:
10622-GENERIC
CUSTOMER NAME:MEIJER SITE LAYOUT
TITLE:
SEBRIGHT PRODUCTS INC.127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
REVISION:7/28/20147/28/2014 1:27 PMPRINTED DATE AND TIME: