laundry - reciprotor · single-tank laundry machines with max 12 kg capacity. lr 15...
TRANSCRIPT
LaundryDosing and Cleaning Systems
innovation > technology > future
2 cleaning & hygiene > products for laundry
�Single system
�dynamik LR[Peristaltic dosing pumps]
�opl basic[Dosing systems]
�Double system
�opl basic[Dosing systems]
�Triple and more system
�smart P[Dosing systems]
�smart R-P[Dosing systems]
1
2
1. OPL machinesup to 7 Kg
�Double system
�opl basic[Dosing systems]
2. commercial machinesup to 25 Kg
�Triple and more system
�smart H[Dosing systems]
�smart R-H[Dosing systems]
�Double system
�smart H[Dosing systems]
�smart R-H[Dosing systems]
3. industrial machinesover 25 Kg
�smart spring[Dosing systems]
�spring MS1 series[Mechanical diaphragm metering pumps]
�tekna EVO[Solenoid dosing pumps]
4. tunnel machines
�up to 55 Kg
�master top[Centralised peristalticmulti-washer system]
�up to 200 Kg
�master ultra[Decentralised pneumaticmulti-washer system]
�tunnel
�master tunnel[Multi-tunnel system with PLC]
�master tunnelR[Relay systems for tunnel]
5. multi-washer machines
innovation > technology > future 3
5
4
6
3
�proklyn
�prowash
�profoam
6. surface cleaning
cleaning & hygiene > products for laundry
Preciseprogrammingof delay, dosing and lockout times by keys displayand microprocessortechnology
Improvedlifetimeof squeeze tube and motorthanks to the TransaxleTechnology and to newtechnology tubing
IP 65 enclosureMade of PP reinforced withglass fiber so that it is extremelywater and dust proof.
seko’s constructiontechnology continues to provideproducts with high resistance toimpacts and the chemicalagents.
Electrical class 2Making a ground cableconnection unnecessary.
MaterialsThe entire range is made usingfire-retardant materialsaccording to the RoHS directive(Restriction of HazardousSubstances Directive).
Wide rangeof optionsAll pumps can be supplied withthe possibility of connecting alevel probe, acustic alarm andpriming by means of a switch
multifuction digital peristaltic pump
dynamik LR
Easy to installThanks to convenient wall fixing brackets
Squeeze tube replacementdoes not require pump starting, special tools or qualified personnel
dynamik LR is a fixed speed peristaltic pump with digitaladjustment of delay, dosing and lock-out time, designed to be used onsingle-tank laundry machines with max 12 Kg capacity.
LR 15 (sekoflex squeeze tube) 0.1 bar 15 lt/h
4
Power supply from 100 to 240 Vac 50-60 Hz (24 Vac 50-60 Hz upon request)
Power consumption 3.5 W • Dosing time from 0 to 999 s
Delay Time from 0 to 999 s • Lock-out Time: from 0 to 999 minutes
innovation > technology > future 5
oplbasic Series offers a wide range of single and/or two product timed systems for liquidand dry product applications. Chemical dosing is activated automatically by a signal from thewasher or by manually pressing the membrane switch located on the front of the unit. (Optionalremote manual switch also available)
Dosing timeAccepts program run time 0 - 10 minutes. Easy calibration method of programming.
Lock out timePrevents repeat dispensing of product from 0 to 75 minutes with dip switch settings.When the lock out time expires, the pump or solenoid valve will restart, if signalled.
Delay timeUsing an internal trimmer, delay the start of the pump from 0 - 5 minutes. When theOPLBasic receives a signal, dispensing with not begin until after the programmeddelay time
AlarmsOptional: LED and buzzer signals an empty product warning.
Remote ControlAn optional remote switch is available with 5 mt. of cable.
Easy to useDip switches, trimmers andjumpers make calibration andprogramming quick and easy
Front cover opens to 90°degrees for easy access toconnections
Prime switches for each product
Easy installationMinimummaintenanceSimply run the tubing andconnect to the power supply
Easily mounted and removedwith built in mounting brackets
No special tools required
Safety - ReliabilityAll settings are made inside the cabinet todiscourage tampering
Water resistant and durable
End of product alarm input
sekoflex and sekobril squeeze tubing,always equipped with inlet-outlet fittings for fastand safe connections
dosing systems
oplbasic
cleaning & hygiene > products for laundry6
Power supply 115/208/230 Vac 50-60 Hz Consumption 4,5 W
Dimensions W 198 x D 172 x H 115 mm Weight 2,5 Kg
Pump: sekoflex squeeze tubing 18 lt/h
Power supply 115/208/230 Vac 50-60 Hz Consumption 4,5 W
Dimensions W 273 x D 172 x H 115 mm Weight 2,5 Kg
Solenoid Valve: 24 Vdc
oplbasic LLDosing system with double peristaltic pumps
Power supply 115/208/230 Vac 50-60 Hz Consumption 9 W
Dimensions W 198 x D 172 x H 115 mm Weight 3,3 Kg
Pump: sekoflex squeeze tubing 18 lt/h
oplbasic DDDosing system with double solenoid valve
Power supply 115/208/230 Vac 50-60 Hz Consumption 9 W
Dimensions W 348 x D 172 x H 115 mm Weight 3,3 Kg
Solenoid Valve: 24 Vdc
oplbasic DLDosing system with a peristaltic pumps and a solenoid valve
Power supply 115/208/230 Vac 50-60 Hz Consumption 9 W
Dimensions W 273 x D 172 x H 115 mm Weight 3,3 Kg
Pump: sekoflex squeeze tubing 18 lt/hSolenoid Valve: 24 Vdc
oplbasic DDosing system with a solenoid valve
oplbasic LDosing system with a peristaltic pump
innovation > technology > future 7
dosing systems
smartsmart systems combine technological development in peristaltic systems, where SEKO is a worldwide leader, with guaranteed reliability for the chemicals dosing in commercial laundry machines, bothOPL and industrial ones. Specific innovations and accurate design of all mechanical parts make it ableto manage each dosing formula and to assure high quality performances.
Control unit(only for programmable smart)
• Easy to install on board of laundry machine
• Accepts programs transferring by memorycard
• Washing diagnostic data visualization
• Manual or automatic programs activationavailable
• Equipped with tamper resistant devices
Maximum flexibilityA WORLDWIDE UNIQUE INNOVATION
Available in versions from 2 to 7 pumps,covering a wide flow rate range, from 18 lt/hto 120 lt/h (300 ml/min to 2000 ml/min)
Long-life pump motors with fixed flowrate at 18 lt/h (P Series) or selectable flowrate at 30, 60, 90 or 120 lt/h (H Series) viajumper
Able to dose up to 3 chemical productssimultaneously
Squeeze tubing: Santoprene andSekobril. Always equipped with inlet-outletfittings for fast and safe connections(different tubing types are available forspecific chemicals)
Plastic enclosure7 pumps connection electrical circuit
Front cover opens to 85° allowingeasier electrical connections
IP 65 protection degree and class 2electrical insulation (no groundconnection required)
Easy maintenance, no special toolsrequired
Easy wall mounting and removingthanks to the built-in mounting brackets
Equipped with tamper resistantdevices
P seriesPumps 2 to 7 • Flow rate 18 lt/h (300 ml/min) • Power supply 115, 208 or 230 Vac selectable 50-60 HzPower consumption 30 W max • 6 Input signals 20 to 230 Vac or 150 to 230 Vac
8
smarttriggered via signals from laundry machines. 20 washing formulascapability each having unique run times and delay times for each pumps.
smart Rwith relay mode operation. Pumps run as long as their respective signalsare present. Run times, delay times and formulas disabled.
Most complete and advancedlinear programming system, toassure total dosing management(only for programmablesmart).
• Accepts up to 40 wash formulas,2 separate categories with 20formulas each. (Example:Hotel/Motel and Healthcare)
• 25 programming lines foreach washing formula
• No connection to control unitrequired for programmingoperations
• Washing phases skipping thanksto the simple programminginstruction
• Pump calibration to dose directlyin grams
• Chemical usage data available
• Serial interface and smartware software assureprogramming and statistic datamanagement by PC
• Autowash function: allowsautomatic wash formulaselection just by receiving inputsignal combinations fromlaundry machine
Power supply
By 9 V battery (included)By cable from control unitBy AC/DC adapter (on demand)
PC interface (on demand):By serial or USB cable andsmart ware software
Memory CardPrograms
• One programmer toset differentsmart
• Data communication
• User passwordprotected
Languages
• Allows to set theprogramminglanguage
• Available languages:English, Italian, French,German and Spanish
One programmer for all your systems
cleaning & hygiene > products for laundry
H seriesPumps 2 to 7 • Flow rate 30 lt/h (500 ml/min) - 60 lt/h (1000 ml/min) - 90 lt/h (1500 ml/min) - 120 lt/h (2000 ml/min)Power supply 100 to 240 Vac 50-60 Hz • Power consumption 100 W max • 6 Input signals 20 to 230 Vac or 150 to 230 Vac
9innovation > technology > future
Solenoid Valve� Plastic covering and low tension power supply
� Non-return valve between solenoid valve and chemicalinjection area
� Water inlet tubing (F3/4 - 20 bar - 60°C) and three-way faucet with water pressure regulation
Flush manifold� Easy ti install to the
underside of the cabinet.Can also be wall-mounted
� Injection fittings equippedwith built-in check valves.Position is adjustable forease of tubing installation
� Pressure switch availableas an option
� Flow sensor (on demand)
Flush kit
Level control and Suction devices� Optional, externally mounted, empty product alert system available.
� Fast and safe connections with the equipped foot filter and tubing fittings
Dimensional DrawingsH Series P Series
2 375 375
3 465 375
4600
(375+285)465
5750
(375+375)660
(375+285)
6840
(375+465)660
(375+285)
71035
(375+285+375)750
(375+375)
Pumps Length (mm)
�
Systems composition P and H Series
� INCLUDED � ON REQUEST *Stainless steel enclosure version on demand
Flush Kit
�
Control Unit
�
Suction Devices
�
Levels control
�
Programmer
�
PC Interface
cleaning & hygiene > products for laundry10
R-Hseries
Technical FeaturesPumpsfrom 2 to 6with priming button
Flow rate30 lt/h (500 ml/min)60 lt/h (1000 ml/min)90 lt/h (1500 ml/min)120 lt/h (2000 ml/min)
System powersupply100 to 240 Vac50-60 Hz
Powerconsumption (max.)100 W
Input signals: n. 620 to 230 Vacor 150 to 230 Vac
R-Pseries
Technical FeaturesPumpsfrom 2 to 6with priming button
Flow rate18 lt/h(300 ml/min)
Systempower supply115, 208 or 230 Vacselectable 50-60 Hz
Powerconsumption(max.)30 W
Input signals: n. 620 to 230 Vacor 150 to 230 Vac
�
Systems composition P and H Series
� INCLUDED � ON REQUEST *Stainless steel enclosure version on demand
Flush Kit Control Unit
�
Suction Devices
�
Levels control Programmer PC Interface
innovation > technology > future 11
dosing systems
smart springsmart spring is a system designed to control a motor drive orsolenoid metering pumps instead of peristaltic pumps*. The new system canoperate in programmable mode (triggered by signals) or in relay mode.
(*) pumps not included
System power supply100÷240 VAC
Power consumption(max) 100W
Input signalsPossibility to connect at maximum 6trigger signals 20÷230 VAC or150÷230 VAC (selectable by jumpers)
Relay outputsPossibility to connect atmaximum 7 pumps
Relay• Designed to switch heavy duty loads
up to 0,55 Kw• Din rail mounting• Normally open
Programs• One programmer to set different smart• Data communication• User password protected
Languages• Allows to set the programming language• Available languages: English, Italian, French,
German and Spanish
Systems availablesmart springtriggered via signals from laundry machines.20 washing formulas capability each havingunique active times and delay times for eachrelay outputs.
smart spring Rwith relay mode operation. Relay outputsactive as long as their respective signals arepresent. Activation times, delay times andformulas disabled.
Maximum flexibilityAvailable in versions from 7 relay outputscovering a wide dosage range
Power relay for heavy duty loads
Able to dose up to 3 chemical productssimultaneously
Plastic enclosure7 relay outputs connection electrical circuit
Front cover opens to 85° allowing easierelectrical connections
IP 65 protection degree and class 2electrical insulation (no ground connectionrequired): equipped with tamper resistantdevices
Easy maintenance, no special toolsrequired and easy wall mounting orremoving thanks to the built-in mountingbrackets
One programmer for allyour systemsMost complete and advanced linearprogramming system, to assure total dosingmanagement (only for programmable smartspring).
• Accepts up to 40 wash formulas, 2 separatecategories with 20 formulas each. (Example:Hotel/Motel and Healthcare)
• 25 programming lines for each washingformula
• No connection to control unit required forprogramming operations
• Washing phases skipping thanks to the simpleprogramming instruction
• Pump calibration to dose directly in grams
• Chemical usage data available
• Serial interface and smart waresoftware assure programming and statisticdata management by PC
• Autowash function: allows automaticwash formula selection just by receiving inputsignal combinations from laundry machine
Control unit(only for programmable smart)• Easy to install on board of laundry machine• Accepts programs transferring by memory card• Washing diagnostic data visualization• Manual or automatic programs activation
available• Equipped with tamper resistant devices
Technical features
Memory Card
cleaning & hygiene > products for laundry12
Analogue dosing pump with constant flowrate manually adjustable
ModelCode Pressure
[bar]Flow rate
[lt/h]Fequency max[stroke./min]
Stroke capacity[cc/stroke]
Ø ConnectionsIN / OUT [mm]
Consumption[W]
121051
7101518
320
0,360,520,780,94
4 / 6 23,9800
5421
20254054
300
1,111,392,22
3
8 / 12 22,2803
CleverJust 4 Models, justPVDF, all functions inone pump
CompatiblePVDF pump head andceramic ball valve asstandard
ReliableLong life diaphragmtested to give 5 yearsworking life
IntuitiveprogrammingA new concept ofprogramming menu
SteadyDosingPerformanceStabilized MultiPower Supply100÷240 Vac 50/60Hz with reducedconsumption
solenoid dosing pumps
teknaEVO AKL
MS1 pumps are mechanical diaphragm metering pumpsfeaturing a spring return mechanism in an aluminium housing
� Flow rate from 1 to 60 lt/hwith an output pressure upto 20 Bar
� Casing made of PP reinforcedwith glass fibre
� IP 65 rated
� PTFE diaphragm
� Level control input
� Priming valve
� Complete standardinstallation kit composed by:foot filter and injection valve,PVC suction tube, PE deliverytube and fixing bracket
mechanical diaphragm metering pumps
springMS1 series
Code Diaphragmdiameter
Strokelength (mm)
Strokes/min Flow rate(lt/h)
Max pressure Connections
bar psi
3phasesMotor (kw)
108 4 78 80 10 145 3/8 gf 0,37M S 1 B 1 0 8 B
138 658
78
155
2207 101,5 3/4 gf 0,37
165 678
116
330
4605 72,5 1” gf 0,37
M S 1 C 1 6 5 B
M S 1 C 1 6 5 C
Liquid end SS 316 or PP liquid end (standard).
PTFE diaphragm The material in contact with the liquid to be dosed are listed in the“pump head materials” table (special materials may be supplied on request).
Max dosage temperature• SS 316 pump head: 40° C
• PP pump head: 40° C
Flow rate adjustment Every pump can be equipped with an electric actuator whichaccepts a 4÷20 mA.
M S 1 C 1 3 8 A
M S 1 C 1 3 8 B
� Capacityfrom 80 to 460 lt/h
� Max pressure10 bar
� Stroke rate58 • 78 • 116 strokes/minute
� Diaphragm diameterfrom 108 to 165 mm
� Motorstandard 0,37 Kw (IP 55)
� Stroke length4 mm • 6 mm
innovation > technology > future 13
Signal Interface ModuleAllows the connection of the electricsignals coming from the washer andcommunicates with the central unit.Each module can manage up to twowashers.
Central UnitIt is the control system that contains a processor (PLC) whichmanages the whole dosing process.
A communication card integrated with it manages thecommunication between the various modules.
PeripheralModuleAllows the chemicalproduct to be dosed tothe different washers.
Each module canmanage up to fourwashers.
AccessoriesA control console is available for selecting theformulas, in case the washers on the installation havea standard or card programmer.
decentralised peristalticmulti-washers system
master topDecentralised peristaltic multi-machine washer for dosing chemical products (liquids or powder)in 4 or 5 washers with different load capacity up to 55 kg. The systems available : 6 or 7 pumps.
Minimum maintenanceThe materials of the solenoid valves used in the peripheral module arecompatible with the chemical products to be dosed, hence preventingtheir deterioration and reducing maintenance to a minimum.
Maximum safetyThe water solenoid valve integrated in the manifold to allow thetransport of chemical products inside the washer and to clean all itsparts, guaranteeing a long life-time without the risk of mixingincompatible chemical products
Possibility to have a manifold dedicated only to dosing chlorine
Easy installation andprogrammingThe programming of the various washing formulas is carried out ing/kg of washing. Considering the capacity of each washing machine,the density of the chemical product and its concentration, the systemautomatically calculates the operating times of each dosage.
Possibility to connect a PC or a PDA to manage all the systemparameters simply and intuitively, such as the configuration, theprogramming, the calibration and the visualization of the alarms,hence making the operator’s job easier.
cleaning & hygiene > products for laundry14
decentralised pneumaticmulti-washers system
master ultraDecentralised pneumatic multi-washer system for dosing chemical products (liquids orpowder) for 4 or 6 washers with different capacity up to 200 kg. The system allows amaximum of 7 liquid chemical products and two powder products to be dosed.
Central UnitIt is the control system thatcontains a processor (PLC)which manages the wholedosing process.
A communication cardintegrated with it manages thecommunication between thevarious modules.
PneumaticPumpThe dosing ofchemical products iscarried out using apneumatic 6 lt/minpump (model P6) ora 20 lt/min pump(P20).
Peripheral ModuleAllows the chemical product to be dosedto the different washers.
Two models are available:
• Model for managing up to fourwashing machines.
• Model for managing up to six washingmachines.Signal Interface
ModuleAllows the connection of theelectric signals coming from thewasher and communicates withthe central unit. Each modulecan manage up to two washers.
AccessoriesA control console is available for selecting the formulas, in case thewashers on the installation have a standard or card programmer.
MinimummaintenancePVC manifold with membranes of TFMmaterial totally compatible with the productto be dosed.
The valves of the product and the flow sensorintegrated in the manifold itself allow dosingand transport to be carried out and to keepall the parts clean, allowing a long life-time,without the risk of mixing incompatibleproducts and eliminating any possibility ofleaks.
Maximum safetyThe water solenoid valve integrated in themanifold to allow the transport of chemicalproducts inside the washer and to clean allits parts, guaranteeing a long life-timewithout the risk of mixing incompatiblechemical products.
For controlling the pneumatic valves, smallsolenoid valves are used, which allow quickopening and closing hence obtaining greaterdosing control.
The presence of the flow meter guaranteescorrect and accurate dosing.
Possibility to have a manifold dedicated onlyto dosing chlorine
Easy installation andprogrammingThe programming of the various washingformulas is carried out in g/kg of washing.Considering the capacity of each washingmachine, the density of the chemical productand its concentration, the systemautomatically calculates the operating timesof each dosage.
Possibility to connect a PC or a PDA tomanage all the system parameters simplyand intuitively, such as the configuration, theprogramming, the calibration and thevisualization of the alarms, hence making theoperator’s job easier.
Main features• It is the control system that contains a
processor (PLC) which manages the wholedosing process. A communication cardintegrated with it manages thecommunication between the various modules.Possibility to dose various products to variousmodules of the system, whether they areliquids or solids in solution.
• In the central control units it incorporatesinterface relays that are activated when theconveyor signals arrive. The relay activationduration is equal to that of the signal. Timersare also provided for the water transfer timein the desired products.
Maximum safety• For controlling the pneumatic valves, small
solenoid valves are used, which allow quickopening and closing hence obtaining greaterdosing control.
• Compact PVC block system withpneumatic membrane valves(EPDM + TFM).
• Possibility to have a manifolddedicated only to dosing chlorine
Minimum maintenanceThe pumps used operate pneumatically and aremade from materials which are compatiblewith the products to be dosed. They do notrequire any type of electrical connection orcontrol solenoid valves
Easy installation andprogramming• The programming of the various washing
programmes is carried out in g/kg of washing.Considering the capacity of each washingmachine, the density of the chemical productand its concentration, the systemautomatically calculates the operating timesof each dosage.
• Possibility to connect a PC or a PDA tomanage all the system parameters simply andintuitively, such as the configuration, theprogramming, the calibration and thevisualisation of the alarms, hence making theoperator’s job easier.
The programming of the various washingprograms is carried out in g/kg of washing.Considering the capacity of each washingmachine, the density of the chemicalproduct and its concentration, the systemautomatically calculates the operatingtimes of each dosage.
Possibility to connect a PC or a PDA tomanage all the system parameters simplyand intuitively, such as the configuration,the programming, the calibration and thevisualisation of the alarms, hence makingthe operator’s job easier.
Main featuresThe system can dose eight chemicalproducts and two powders in ten differentmodules in various tunnel washers. Automaticrecognition system of the washing formulas.
MinimummaintenanceThe pumps used operate pneumatically andare made from materials which are compatiblewith the products to be dosed. They do notrequire any type of electrical connection orcontrol solenoid valves.
Maximum safetyFor controlling the pneumatic valves, smallsolenoid valves are used, which allow quickopening and closing hence obtaining greaterdosing control.
Compact PVC block systemwith pneumatic membranevalves (EPDM + TFM).
Possibility to have a manifolddedicated only to dosingchlorine.
relay systems for tunnel
master tunnelR
Easy installation and programming
Multi-Tunnel system for dosing chemical products (liquids or powder) indifferent modules up to four tunnel washers
Compact system for a tunnel washer with directconnection to the control dosing signals.
The PVC block system controlled by thepneumatic valves makes it very reliable and safewith regard to product leaks.
multi-tunnel system with PLC
master tunnel
innovation > technology > future 15
cleaning & hygiene > products for laundry16
Model master top master ultra master tunnel master tunnelR
Power supply 230 VAC single-phase
1.5 A - 330 W
230 VAC
1200 ml/min
PVC
sekoflex
-
Consumption 1.5 A 2 A 2 A
Pump flow rate 6 lt/min or 20 lt/min 6 lt/min
Peristaltic pumpsqueeze tube
-
Peristaltic pumppower supply
Membranes FPM EPFM + FKM
3 kbData memory -
64 kbProgram memory -
RS 485Communicationprotocol
-
RS 485 ModbusCommunicationprotocol with PC
-
BluetoothCommunicationport with PDA
-
35 Kg 28 KgWeight 20 Kg 15 Kg
Manifold material
-
Model master top
Model
Systems available
Systems available
Model
Systems available
• System to dose 6 liquid chemical products in 4 or 5 washers (standard)
• System to dose 7 liquid chemical products in 4 or 5 washers (on request)
master ultra
Pneumatic P6 System [6 lt/min]:
• System to dose 7 liquid chemical products in 4 washers (max. 4 washers of 150 kg)
• System to dose 7 liquid chemical products in 6 washers (mix of 6 washers with a max. capacity of 150 kg)
Pneumatic P20 System [20 lt/min]:
• System to dose 7 liquid chemical products in 4 washers (mix of 4 washers with a max. capacity of 200 kg)
• System to dose 7 liquid chemical products in 6 washers (mix of 6 washers with a max. capacity of 200 kg)
master tunnel
Contact our technicians directly.
master tunnelR
Contact our technicians directly.
Model
Systems available
innovation > technology > future 17
Features � Easily removable non return valve and polypropylene Venturi system
� Connection direct to the water line
� Low sensitivity to water pressure variations
� Installation via 3 mounting screws
� Antipollution valve
� Nickel plated brass ball valve
� Smooth and ergonomic surface, with profiled front cover
� Strong structure, protected against “water hammer” effect
� High chemical resistance
� Gun with adjustable spray nozzle, completely covered with foodgrade rubber brass body (only for proklyn and prowash systems)
� 15 coloured coded dilution tips
� Food grade quality discharge tube
� 60 cm or telescopic (1 up to 2 m) gun
Advantages� Easy installation, use and maintenance
� Versatility, safe handling, heavy duty capability. Fastest connectiongun with anti shock protection
� Constant flow rate despite of pressure variations
� Easily adaptable to change from a 1 product unit into 2 productssystem
� Allows to easily choose 15 different mixing ratios, making the dosingaccurate and efficient
� No electric power
� Works even with low water pressure
� Prevents the wastage of water and cleaning products, therebycontributing towards environmental protection and cost control
� The 2 product units: a single appliance optimises working time andallows different products such as disinfectants and detergents to beused in succession
� No oxidation issues
spraying & foaming system
proklyn/prowash/profoamThese units are designed for cleaning and/or disinfecting floors and surfaces in thefood industry:
� food preparation areas (as full service kitchens, meat processing plants, vegetableprocessing meat rooms, delicatessen, seafood stores, bakeries)
� packing areas, trucks washing, loading docks, auto dealers, fitness facilities (lockerrooms in schools, health clubs), etc.
prowash
Available models:
prowash “1 product”for clean/rinse operations
prowash “2 products”for clean/rinse/sanitize operations
proklyn
Available models:
proklyn “1 product”for clean/rinse operations
proklyn “2 products”for clean/rinse/sanitize operations
cleaning & hygiene > products for laundry18
Technical FeaturesWORKING TEMPERATURE60° C max.
WORKING PRESSION0,5 up to 5 bar
METERING TIPS FOR DILUTION RATIOSfrom 211:1 up to 11:1(from 0,50% up to 10,90%)
DIMENSIONS WITHOUT TUBESLENGHT 380 mmWIDTH 270 mmDEPTH 70 mm
WEIGHTSPRAYING STATION ONLY 1,5 kg
Technical FeaturesWORKING TEMPERATURE60° C max.
WORKING PRESSION0,5 up to 5 bar
METERING TIPS FOR DILUTION RATIOSfrom 211:1 up to 11:1(from 0,50% up to 10,90%)
DIMENSIONS WITHOUT TUBESLENGHT 380 mmWIDTH 260 mmDEPTH 90 mm
WEIGHTSPRAYING STATION ONLY 3,3 kg
profoamAdvantage
� High-quality, dry foam
� Optimal working time for thefoam on the surfaces
� Lower water consumption
Foam units generate foam to cleanand/or disinfect surfaces
Features� Fits directly onto the low-pressure
water and compressed-air circuits
� The PVC version comes with a built-inhose prop, the stainless steel versioncomes with a separate hose prop
� This system can also be trolley-mounted, with an air compressoravailable as an option
� A water and air pressure manometeris included
innovation > technology > future 19
STA
INLE
SS
ST
EE
L R
EE
LS
GU
N(s
tan
da
rd f
or
pro
kly
n a
nd
pro
wa
sh
) Features� Brass body, completely covered with food grade rubber
� High flow nickel plated nozzle, stainless steel spring and pin
� Reinforced lever trigger
� Adjustable spray
� Quick coupling system
� Up to 80°C working temperature and 25 bar working pressure
Advantage� Heavy duty
� Fastest connection
� Easy to connect
� Rugged, versatile, safe handling, anti shock protection, heavy duty
DIS
CO
NN
EC
TO
R(u
po
n r
equ
est)
The stainless steel reel allows users to stow the hoses away effortlesslyand quickly.
Features� Entirely built in stainless steel (AISI 304)� Can be mounted onto horizontal or vertical surfaces� Automatic winding
Advantage� Rugged and long lasting� Versatile and space saving
Dimension: H=50 cm L=26 cm D=60 cmHose length: 20 m • Weight: 30 Kg
� Prevents any possible water pollution through chemical backflow
� Easily accessible BA triple check valve, 3 connecting and testingpoints
� Approved by DVGW (Deutsche Vereinigung des Gas- undWasserfaches e.V. - German Normative Bureau)
� Conforms to EN 1717 norm
The technical data may be altered without prior warning. The drawings and images are for illustrative purposes only.© seko spa / Printed in Italy / BRO LAUUK 081
www.seko.com
SEKO Asia Pacific SINGAPORE • SEKO China CHINA • SEKO do Brasil BRAZIL • SEKO DosingSystems USA • SEKO Deutschland GERMANY • SEKO France FRANCE • SEKO Iberica SPAINSEKO Italia ITALY • OOO SEKO RUSSIA • SEKO Northern Europe DENMARK • SEKO SIETAROMANIA • SEKO Southern Africa SOUTH AFRICA • SEKO UK UNITED KINGDOM