PRODUCTS PageAmada 7Allied Machine 1Blaser Swisslube 6Haimer 6 Emuge 8Garr 5Haas 2Hydmech 7

APRIL - JULY - SPRING/SUMMER 2018

ONE STOP FOR YOUR MACHINE SHOP

JOIN OUR ONLINE COMMUNITY

www.sandvik.coromant.com

CoroCut® QF is a new concept designed for face grooving.

It provides unmatched reliability even when it comes to deep, narrow grooves, an often troublesome operation where chips tend to get stuck in the groove and harm the production efficiency.

• Tilted insert for stability• Stabilizing rails at the top, bottom, and back of the insert to

minimize insert movement• Improved process security, groove quality, and tool life• Precision over and under coolant solution providing

chip control (over coolant) and insert tool life (under coolant)

• For machining ISO P (low-carbon and high-strength steel) and ISO S at higher feed rates

• Designed for excellent chip control in difficult-to-machine materials • Delivers high productivity and longer tool life • For B-type inserts

CoroTurn® Prime New Geometries H3 & H3W

CoroThread® 266External and Internal Thread Turning

CoroMill® 331 Multi-Purpose Side and Face Milling Cutter

CoroCut® QFFace Grooving

Tool it up Right From The Startwith Sandvik!

Maximize your investment in a new machine tool.

• NOW WITH INTERNAL COOLANT• Cassettes with pin-controlled adjustment range• High accuracy for precise groove dimensions• Easy precision setting for desired width• Wide range of tools for great flexibility

Latest Cutting Tools & Solutions

Precision over and under coolant solution providing chip control (over coolant) and insert tool life (under coolant). The precision coolant solution enables:

• NOW WITH INTERNAL COOLANT• Improved process security• Higher component quality• Higher machining efficiency• Trouble-free machining

• Be ahead of the pack through smart planning and innovative, applicable technologies

• Make machines productive sooner• Reduce machine-payback time and

tooling investment by 25%

www.thomasskinner.com

Contact your Thomas Skinner Representative

WE HAVE PARTNERED WITH THE BEST TO BRING YOU THE BEST

QUICK DELIVERY MOST PRODUCTS EX-STOCK USA

Allied Machine’s innovative high performance metal cutting solutions are now available from Thomas Skinner.

Allied Machine & Engineering is a worldwide leader in holemaking and finishing solutions with over 75 years of experience. Tooling solutions that deliver the lowest cost-per-hole in a wide range of drilling, reaming, burnishing, threading, and boring applications make Allied the first

and best choice for solving complex metal-cutting challenges.

DRILLING BORING REAMING BURNISHING THREADING

DX6™ CrossOver™ Vise

The BEST D-Series vise Kurt has ever produced!The revolutionary DX6™ CrossOver™ vise combines all the great features of Kurt’s

world-renowned D688 and 3600V vises, along with new state-of-the-art workholding

features. This vise achieves new levels in precision and

performance where flatness and parallelism are important.

Features the same bed height and keyway to the stationary jaw face as

the D688, and a redesigned nut with lighter weight and new brush seal

design. The bearing pack is larger, stronger, and more durable than our

other designs, and our proprietary AngLock® spherical segment creates

all-directional alignment and reduces jaw

lift for improved performance.

Jaw Width Jaw Opening Order # Special $6" 9" KUR-DX6 719

HOTprice

PRODUCTS PageKurt 1 Lenox 7Mitutoyo 3Okuma 4 Sandvik 1 NEWS 8EVENTS 8

Thomas Skinner

is proud to be the

exclusive Haas

distributor for

Western Canada

and Alaska. For

a complete list of

Haas products

please visit www.

haascnc.com.

Haas ST-50 and ST-55

Haas DM-1/DM-2 Take a Bite Out of Cycles Times.

Haas Has Your Large-Capacity Needs Covered.

Heavy-duty, large-bore turning centers that provide heavy cutting ability, extreme rigidity and high thermal stability. Ideal for machining heavy pipes and fittings, large couplers and long rollers.

Do even more with a wide selection of high-productivity options (partial list).

High-speed, lean style machining centers with a compact footprint that allows multiple machines to be placed side-by-side, making the most efficient use of valuable shop floor space. A Haas 40-taper inline spindle, 18+1 tool changer, high acceleration rates, fast axis speeds and short tool change times – all combine to shorten cycle times and reduce non-cutting time.

• Front and rear spindle noses (dual-chuck capability) with easy access for chuck installation and part loading

• Extra-large spindle noses and spindle bore• 2-speed gearbox• Fully programmable servo tailstock

Haas CM-1

Small Parts? No Problem.

Small-footprint, high-accuracy Compact Mill for high-volumeproduction and prototyping of small, high-precision 2D and 3D parts.

Small parts manufacturing poses its own machining challenges.Tiny holes, minute features, extreme accuracies and fine surface finishes can prove difficult for larger CNC machines.

• Ultra-compact footprint• 20-pocket tool changer• 30,000-rpm ISO 20-taper spindle (50,000 rpm available)• Operates on single or three-phase power• With optional full 5-axis capability, this ultra-compact mill will

boost your shop’s productivity.• Starting at $59,995 USD

• Through-Spindle Coolant Systems• Through-Tool Air Blast• Chip Auger• High-Speed Machining w/Look-Ahead• Wireless Intuitive Probing System• 4th- and 5th-Axis Drives• …More

Haas CL-1Innovative ultra-compact CNC chucker lathe perfectfor high-volume production of small, precision parts.• Ultra-compact footprint• 8-station automatic tool turret• 6,000-rpm 5C collet spindle• Operates on single- or three-phase power • Optional integrated bar feeder system (shown in photo)

(Spindle speed limited to 3000 rpm when feeding bar.)• Starting at $39,995 USD

Let’s find the right machine for your shop, and make it your own

by adding the options and features that work for you.

Contact your local Machine Tool Sales Representative for availability.

ST-50 ST-55Max Capacity 25.5” × 80”Chuck No chuck or rotating union includedSpindle Bore Diameter 8.5” 12.5”Spindle Speed Front & Rear A2-15 Front & Rear A1-20Spindle Motor 55 HPSpindle Speed 1200 rpm 1000 rpmBase Machine Price $241,995 USD $265,995 USD

Available with a wide selection of high-productivity options (partial list).

DM-1 DM-2Travels XYZ 20” × 16” × 15.5” 28” × 16” × 15.5”Table 26” × 15” 34” × 15”Spindle 12,000-rpm Spindle, 40 taper, 15 HP, Inline Direct-DriveRapids 2400 IPMCutting Feedrate 1200 IPMBase Machine Price $59,995 USD $61,995 USD

FOB OXNARD, CA

FOB OXNARD, CA

• High-Pressure Coolant Systems• Air-Chuck-Ready Provision• Steady Rest Provision• Belt-Type Chip Conveyor

Optional bar feeder system shown.

www.mitutoyo.ca

QUANTUMIKE MICROMETER

FEATURES:• Measures 4x faster with 2mm per revolution

instead of standard 0.5mm • Patented ratchet thimble mechanism helps ensure repeatability

293-180

Without SPC output

RANGE RESOLUTION ORDER # SPECIAL $0-1”/0-25.4 mm .00005”/0.001 mm MTI-29318530 225.80

MTI-10390740 (6pc set) MTI-10390840 (12pc set)

OUTSIDE MICROMETER SET

RANGE GRAD DESCRIPTION ORDER# SPECIAL $

0 - 6” 0.0001” 6 micrometers, 5 standards MTI-10390740 744.25

0 - 12” 0.0001” 12 micrometers, 11 standards MTI-10390840 1,820.25

141-233

INSIDE MICROMETERINTERCHANGEABLE ROD TYPE

RANGE MICROMETER ORDER # SPECIAL $

2 - 12” .50” MTI-141233 211.65

TUBULAR INSIDE MICROMETER• Extension rod type• Travel of micrometer head .5”• 8 extension rods• Graduation: .001”

RANGE ORDER # SPECIAL $

2 - 40” MTI-137214 549.15

COOLANT-PROOF CALIPERS

MTI-50075220/ MTI-50075320

RANGE ORDER # SPECIAL $0 - 6”/0-150 mm MTI-50075220 209.150 - 8”/0-200 mm MTI-50075320 281.650 - 12”/0-300 mm MTI-50075410 397.50

MTI-50075410

Without SPC data output.

DIGIMATIC CALIPERS Mitutoyo’s ABS (Absolute) Digimatic Caliper offers special functions which allows it to always remember its measuring position even after the gauge has been switched off.

Featuring Position Memory and a 3.5 Year Battery Life!

RANGE REMARKS ORDER # SPECIAL $0 - 6” / 150mm Without SPC output MTI-50019630 154.800 - 8” / 200mm Without SPC output MTI-50019730 223.100 - 12” / 300mm Without SPC output MTI-500193 420.700 - 12” / 300mm With SPC output MTI-500173 465.00

DIAL CALIPER

RANGE GRADUATION PER REV ORDER # SPECIAL $0 - 12” .001” .1” MTI-505746 288.30

505-746

• Ultra-smooth movement and high shock protection

• Lock screw for dial bezel and for holding the sliding jaw position

• Measures OD, ID, depth and steps

CLEARANCE

DIGIMATIC HEIGHT GAGEWith SPC Data Output

FEATURES:• Switchable resolution• Easy-to-use standard type• Carbide-tipped scriber• Double-column structure• Coarse/fine feed switching.• Two preset reference heights

192-632-10

One unit only available at this price.

DIAL INDICATORDurable and scratch resistant.

2416S

GRADUATION RANGE DIAL READ-ING ORDER # SPECIAL $

.001" 1.00" 0-100 MTI-2416S 105.00

MAGNETIC INDICATOR BASES

DESCRIPTION ORDER # SPECIAL $Magnetic Stand -

applicable holding stem dia. Ø6mm, Ø8mm*,

Ø9.53mm (3/8”)

MTI-7010SN 86.65

Universal Magnetic Stand - applicable holding stem dia. Ø6mm,

Ø8mm*, Ø9.53mm (3/8”), with dovetail groove.

MTI-7033B 199.15

MTI-7010SN

CONTAINS:• 7010SN

magnetic stand • 2416S 1" dial

indicator • Plastic tool case

ORDER # SPECIAL $MTI-7046PCK 185.00

MAG STAND/INDICATOR SETModel 7046PCK

DIAL TEST INDICATOR SETSeries 513 - Horizontal Type

• Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access• Jewelled bearings, anti-magnetic

RANGEGRAD/DIAL READING ORDER # SPECIAL $

.03” .0005”/0-15-0 MTI-51340210T 126.75

BORE GAUGESSeries 511FEATURES:• Most popular bore gauge• Carbide tipped contact points• Dial indicator fully protected by a rugged cover• Optional extension rods can be attached

for measuring deep holes

511-751

RANGE DIAL # OF ANVILS# OF

SPACERS ORDER # SPECIAL $

2 - 6” 2922SB (.0005”)

11 (2” sub anvil) 4 MTI-

511743394.15

2 - 6” 2923SB-10 (.0001”)

11 (2” sub anvil) 4 MTI-

511753375.00

Accepts all dialindicators and test indicators.

MTI-7033B

Full set

Contact point, .039" DIA.carbide

Contact point, .118" DIA.carbide

Stem, .157" DIA.

Swivel clamp (.157" DIA., 3/8" DIA., dovetail)

Inch holding bar (L: 4")

RANGE ORDER # RESOLUTION SPECIAL $

0-24”/0-600mm MTI-19263210.0005”(0.01 mm)

(.0002”(0.005 mm) Switchable)

1,550.00

Okuma MCR-A5CII Double Column Machining Centers

Okuma MULTUS U-Series

(For 5-sided applications)

(7 & 9 Axis Multi-function Machines)

If you need to machine large parts with multiple operations, the MCR-A5CII is the double column to consider.

Done-in-one manufacturing takes on its newest look with the MULTUS U-Series. Combine operations by doing turning, and milling in one set-up. Control up to 9 axes to make your most sophisticated parts.

The ideal has evolved!Hugely expanded range for powerful 5-sided machining

Highly accurate, rigid, hi-tech, and process-intensive -All that’s required and packed inthe ultimate multitasking machine

Available with:• Equal capacity lathe spindles (L & R)

• CAPTO C6 H1 12,000 RPM milling spindle

• 12 station lower BOT turret (2S models)

• Steady rests available (optional)

• Skiving and hobbing gear capabilities (optional)

• Up to 18” chucks and 80” bed length

• Full 5-axis capabilities

• In-process gauging

• Up to 180 tool tapacity magazine

Thermo-FriendlyConcept

Collision Avoidance System

Machining Navi

MULTUS U3000/MULTUS U4000/MULTUS U5000

1SC = Upper Turret, Tailstock

2SC = Upper/Lower Turret, Tailstock

1SW = Upper Turret, Opposing Spindles

2SW = Upper/Lower Turret, Opposing Spindles

Thermo-FriendlyConcept

Collision Avoidance System

Machining Navi

MULTUS U4000-2SW-1500

STANDARD STANDARD OPTION OPTION

5-Axis AutoTurning System

With work envelopes up to 3.5 meters between the columns and 12 meter table lengths, there is a model sized for your application.

The MCR-A5CII comes standard with a robust “Ram-Style” head, a high-speed NC Cross-rail (W-Axis), and a 2-Station Automatic Attachment Changer that enables quick and easy switches between vertical and side milling.

The 90-degree milling head indexes in 15-degree increments, allowing the operator to machine multiple faces without reorienting the part.

The standard 50-tool magazine changes tools in the vertical or 90-degree position without operator intervention.

U3000 U4000 U5000Model 1SC 2SC 1SW 2SW 1SC 2SC 1SW 2SW 1SC 2SC 1SW 2SWMax Turning Diameter 25.59” (650 mm) 25.59” (650 mm) 25.59”Available Bed Lengths 39.37” or 59.06” (1000 or 1500 mm) 59.06” or 78.74” (1500 or 2000 mm) 59.06” or 78.74” (1500 or 2000 mm)Y-Axis ±4.92” (125 mm) ±5.91” (150 mm) ±5.91” (150 mm)Chuck Size 8” or 10” 10” or 12” 12” to 18”

STANDARD OPTION OPTION

• Full 5-axis capabilities

• In-process gauging

• Up to 180 tool tapacity magazine

Size range available from 4 mm - 1”. Also available in fractional and metric.

Size range available from 1.5 mm - 1”. Also available in fractional and metric.

*Tools with weldon flats.Size range available from 6 mm - 1”. Also available in fractional and metric.Size range available from 6 mm - 1”. Also available in fractional and metric.

Size range available from 6 mm - 1”. Also available in fractional and metric.Size range available from 6 mm - 1”. Also available in fractional and metric.

Size range available from 6 mm - 1”. Also available in fractional and metric.

• The standard in high performance milling• Reduces vibration for more aggressive machining

resulting in less cycle times and greater productivity• Staggered flute geometry

HIGH PERFORMANCE END MILLS SOLID SUBMICRON GRAIN CARBIDE END MILLS

HIGH PERFORMANCE SOLID CARBIDE CUTTING TOOLS

SQUARE END, CORNER RADIUS, BALL ENDAlTiN Coating

Series VRX

TOLERANCES

d1 +.000" –.002" (+.000 –.050mm)d2 h6d3 +.000" –.005" (+.000 –.127mm)

STAGGERED FLUTE KNUCKLE ROUGHER/RIPPERAlTiN Coating

VARIABLE HELIX END MILLAlCrN Coating

Series VHM

Series V4S Square EndSeries V4S Square End

Series V4R Corner RadiusSeries V4R Corner Radius

Series V5Series V5

• State-of-the-art rougher using VRX technology

• Reduces tool pressure for more aggressive machining

• Recommended for pocket milling• Variable flute geometry

• Helix geometry varies over length of flutes• Variable flute design helps with chip evacuation

in slots and pockets• Variable rake aids in chip formation• PCT (Polish Carbide Treatment) enhances tool

life by 20%• Minimizes burr on part• Can be modified with a flat within 48 hours

Series VHM Staggered Flute Knuckle Rougher/Ripper - AlTiN Coating

d1 d2 l1 l2 Order # Special $Diameter Shank Diameter Overall Length Flute Length

3/8” 3/8” 2” 1/2” GAR-49640 54.00

3/8” 3/8” 2-1/2” 7/8” GAR-49660 61.45

*1/2” 1/2” 3” 1-1/4” GAR-49760 83.10

*3/4” 3/4” 4” 1-5/8” GAR-49880 190.05

Series V4S Variable Helix End Mill - Square End AlCrN Coating

d1 d2 l1 l2 Order # Special $Diameter Shank Diameter Overall Length Flute Length

3/8” 3/8” 2-1/2” 1” GAR-50241 43.10

1/2” 1/2” 3” 1-1/4” GAR-50244 64.45

1/2” 1/2” 4” 2-1/8” GAR-50245 87.20

5/8” 5/8” 3-1/2” 1-1/4” GAR-50246 118.95

1/2” 1/2” 3” 1” GAR-50452 64.45

Series V4S Variable Helix End Mill - Square End AlCrN Coating

d1 d2 l1 l2 Order # Special $Diameter Shank Diameter Overall Length Flute Length

3/8” 3/8” 2-1/2” 1” GAR-50241 43.10

1/2” 1/2” 3” 1-1/4” GAR-50244 64.45

1/2” 1/2” 4” 2-1/8” GAR-50245 87.20

5/8” 5/8” 3-1/2” 1-1/4” GAR-50246 118.95

1/2” 1/2” 3” 1” GAR-50452 64.45

Series V5 Variable Helix End Mill AlCrN Coating

d1 d2 l1 l2 rOrder # Special $

Diameter Shank Diameter Overall Length Flute Length Corner Radius

1/4” 1/4” 2” 3/8” n/a GAR-50007 23.60

1/4” 1/4” 2-1/2” 3/4” n/a GAR-50011 26.80

1/4” 1/4” 3” 1” n/a GAR-50015 40.90

3/8” 3/8” 2” 1/2” .020” GAR-50032 44.15

3/8” 3/8” 2-1/2” 1” .015” GAR-50035 48.00

3/8” 3/8” 2-1/2” 1” .020” GAR-50036 48.00

1/2” 1/2” 3” 1-1/4” .020” GAR-50061 81.90

3/4” 3/4” 4” 1-1/2” .030” GAR-50083 186.95

3/4” 3/4” 5” 2-1/8” .030” GAR-50087 259.35

3/4” 3/4” 6” 3-1/4” .030” GAR-50091 308.05

1/2” 1/2” 2-1/2” 5/8” .010” GAR-50106 73.35

1/2” 1/2” 3” 1” .030” GAR-50109 81.90

3/4” 3/4” 5” 2-1/8” n/a GAR-50338 238.25

TOLERANCESd1 +.000" –.002" (+.000mm –.050mm)d2 h6r +.001" –.001" (+.025 –.025mm)

Series VRX Square End, Corner Radius, Ball End AlTiN Coating

d1 d2 l1 l2 Order # Special $Diameter Shank Diameter Overall Length Flute Length

1/8” 1/8” 1-1/2” 1/4” GAR-61917 13.70

1/8” 1/8” 1-1/2” 1/2” GAR-61927 13.70

3/16” 3/16” 2” 5/16” GAR-62007 17.25

3/16” 3/16” 2” 9/16” GAR-62017 17.25

1/4” 1/4” 2-1/2” 3/4” GAR-62147 23.30

5/16” 5/16” 2” 7/16” GAR-62207 28.40

3/8” 3/8” 2-1/2” 7/8” GAR-62327 39.20

1/2” 1/2” 3” 1-1/4” GAR-62535 58.60

Series V4R Variable Helix End Mill - Corner Radius AlCrN Coating

d1 d2 l1 l2 rOrder # Special $

Diameter Shank Diameter Overall Length Flute Length Corner Radius

1/4” 1/4” 2-1/2” 3/4” .015” GAR-50208 29.00

1/4” 1/4” 2-1/2” 3/4” .030” GAR-50209 29.00

1/4” 1/4” 2-1/2” 3/4” .060” GAR-50210 29.00

3/8” 3/8” 2-1/2” 1” .020” GAR-50217 45.90

3/8” 3/8” 2-1/2” 1” .030” GAR-50218 45.90

1/2” 1/2” 3” 1-1/4” .010” GAR-50224 78.30

1/2” 1/2” 3” 1-1/4” .020” GAR-50225 78.30

1/2” 1/2” 3” 1-1/4” .030” GAR-50226 78.30

5/8” 5/8” 3-1/2” 1-1/4” .020” GAR-50229 124.70

3/4” 3/4” 4” 1-1/2” .030” GAR-50232 178.80

1/2” 1/2” 3” 1” .010” GAR-50379 78.30

1/2” 1/2” 3” 1” .020” GAR-50381 78.30

Series V4R Variable Helix End Mill - Corner Radius AlCrN Coating

d1 d2 l1 l2 rOrder # Special $

Diameter Shank Diameter Overall Length Flute Length Corner Radius

1/4” 1/4” 2-1/2” 3/4” .015” GAR-50208 29.00

1/4” 1/4” 2-1/2” 3/4” .030” GAR-50209 29.00

1/4” 1/4” 2-1/2” 3/4” .060” GAR-50210 29.00

3/8” 3/8” 2-1/2” 1” .020” GAR-50217 45.90

3/8” 3/8” 2-1/2” 1” .030” GAR-50218 45.90

1/2” 1/2” 3” 1-1/4” .010” GAR-50224 78.30

1/2” 1/2” 3” 1-1/4” .020” GAR-50225 78.30

1/2” 1/2” 3” 1-1/4” .030” GAR-50226 78.30

5/8” 5/8” 3-1/2” 1-1/4” .020” GAR-50229 124.70

3/4” 3/4” 4” 1-1/2” .030” GAR-50232 178.80

1/2” 1/2” 3” 1” .010” GAR-50379 78.30

1/2” 1/2” 3” 1” .020” GAR-50381 78.30

• Solid submicron grain carbide drill• For center drilling applications• 60° ±0°30’ included countersink angle• Live tooling recommended on lathe processes• Drill length (l2) is equal to drill diameter (d1)• Not able to be altered

COMBINED DRILL AND COUNTERSINK

High Performance Solid Carbide Cutting Tools Including End Mills,

Drills, Reamers and Burrs.

GENERAL PURPOSE DRILLSSeries 1400

TOLERANCES

d1 +.003" –.000" (+.0762 –.0000mm)d2 h6l1 +.125" –.125" (+3.175 –3.175mm)l2 +.008" –.008" (+.203 –.203mm)

Series 1400 Combined Drill and Countersink

d1 d2 l1 l2 Order # Special $Number Diameter Shank Diameter Overall Length Drill Length

2 5/64” 3/16” 2” .0781 GAR-58040 26.05

3 7/64” 1/4” 2” .1094 GAR-58050 29.70

4 1/8” 5/16” 2-1/8” .1250 GAR-58060 41.55

5 3/16” 7/16” 2-3/4” .1875 GAR-58070 59.35

6 7/32” 1/2” 3” .2188 GAR-58080 79.00

• Effective for trochoidal milling• Staggered flutes to control harmonics• Variable flute design helps with chip evacuation in slots and pockets• PCT (Polish Carbide Treatment) enhances tool life• 12mm and larger tools offered with weldon flat• .375” and larger diameters can be modified

TOLERANCES

d1 +.000" –.002" (+.000mm –.050mm)d2 h6r +.001" –.001" (+.025 –.025mm)

TOLERANCES

d1 +.000" –.002" (+.000mm –.050mm)d2 h6r +.001" –.001" (+.025 –.025mm)

TOLERANCES

d1 +.000" –.002" (+.000mm –.050mm)d2 h6

VASCO 5000

FREE COOLANT CHARGE UP WHEN YOU PURCHASE A NEW MACHINE!You are entitled to a FREE initial charge-up of your new machine with our high performance coolant at no cost to you.EXPERIENCE the Blaser advantage:• Better tool life• Longer sump life• No damage to machineFree offer limited to new CNC machines, 250 US gallon maximum sump size or 946 litres.

call• No harm to people or the environment• Factory trained local support

Vasco 5000 is a chlorine-free, watermiscible, ester-oil based, high performance cutting fluid, best suited in applications with soft water. This product sets new standards in aluminum compatibility, because of no black staining (aluminum corrosion) occurs.

Mineral oil free cutting fluid based on natural resources

Your benefits

High performance cutting fluid for difficult to machine materials as e.g. titanium or Inconel and for heavy duty machining of steel, aluminum alloys, copper alloys (with and without lead).

Characteristics

for details

HAIMER - Your complete system provider for tool management centered around the machine tool.

Tooling Technology Shrinking Technology Balancing Technology Measuring Technology

Power Clamp Special Edition Shrink Fit MachineReliable tool changes - Fastest in the Galaxy.

•Shrink in record time! •Adapted for shrinking High Speed Steel and Solid Carbide Tools with shank diameter ranges of 3 – 32 mm (1/8” – 1-1/4”).•Maximum height of shrink fit chuck 550 mm (21.65”)• “Special Edition” includes 110v speed cooling system with 5 cooling adapters, tool storage tray, 5 stop-disc set•Single chuck version•Standard coil•Integrated contact cooling•3 x 400 – 480 V, 16 Amp, 13 kW Power•Dimensions 500 × 670 × 700 mm, 40 kg.

ORDER # PRICEHAI-8011011SE $16,220 usd

Order # VASCO 5000

BLA-02850050019 5 GAL

DMC Series Double-Column Machining Centers Moving Table Bridge Mills

DMC-4100PHwith optional equipment

• Johnford DMCs are built heavy and strong, and take up less floor space than most C-frame vertical machining centers.• One-piece column and bridge castings (on most models) accomplishes maximum rigidity.• Massive Z-axis head and Y-axis saddle features square box ways and designed with diagonally arranged ribs.• Twin screw-type conveyors plus a caterpillar conveyor ensure complete chip removal with little manual cleaning.

• Chip conveyor• Hydraulic, programmable tailstock body and quill• FANUC OiT-F CNC Control• FANUC Manual Guide i Conversational with 10.4” LCD • Provision for rear mount chuck (chucks extra)

MODEL DMC-4100PHX Travel 161.4” Y Travel 90.5”

Z Travel 31.5”

Optional Z Travel 42.5”

Distance Between Columns 94.4”

Table Working Surface 165.3” × 80.7”Max. Workload on Table 22,000 lbs

Spindle Motor 35 HP

Spindle Torque 575 ft-lbs at only 375 rpmSpindle Taper ISO-50

Spindle Drive System 2 Speed GearboxSpindle Speed 0 – 6000 rpm

Automatic Tool Changer 40 tools (60, 80, 120 optional)Weight (lbs.) 90,200 lbs

ST-70DH Super Turning CenterHigh Precision, Wide Bore, Heavy Duty Spindle

Options Included

Call Your Thomas Skinner

Machine Tool Sales Representative for complete

details and pricing.

MODEL ST-70DHSwing over bed 36.2”

Standard turning diameter 27.5”Distance between centers 67”

Spindle motor 50 HP Spindle nose A2-15Spindle RPM 0 - 1000

Hole through spindle 7.28”Turret tool positions 12

Turret type HydraulicRapid Traverse Rate X/Z 472 / 590 IPM Gearbox

Machine Weight 29,500 lbsFloor Space 254” × 91” × 109”

Range of application Benefits

Excellent cutting performance due toproperties of ester

Vegetable oil-base ester

For soft water

Good rinsing behavior clean machines economical through low consumption

rarely foam formation in soft water

renewable raw materials biodegradable

very long tool life for toughest operations and material excellent surface finishes

FOB VILLA PARK, IL CSA certification is extra.

Call Your Thomas Skinner

Machine Tool Sales Representative for complete

details and pricing.

• Classic style, torque tube design, 60-degree slant bed provides an extremely rigid bed.• Heavy-duty 50 HP spindle motor provides plenty of power. • A four-speed gearbox is standard for applications requiring high torque at low RPM’s. • Super rigid turret for heavy cutting

JULY DELIVERY!

Reliable tool changes - Fastest in the Galaxy.

Order # VASCO 5000

BLA-02850050019 5 GAL

General purpose, environmentally friendly flood coolant designed for light to moderate-duty machining applications involving both ferrous and non-ferrous metals. Extends blade life.

Band-AdeSemi-Synthetic Sawing Fluid

Size Order # SPECIAL5 gallon LEN-68003 $101.00

Bi-metal Band Saw Blades

• Fast cutting of solids of mild to moderate machinability.

• Proprietary backing steel preparation provides increased fatigue life.

• Extreme positive rake tooth form penetrates with less feed force.

• Deep gullet design increases cutting rates.• Use with aluminum/non-ferrous, mold steels, carbon

steels, stainless steels, alloy steels, tool steels, bearing steels.

QXP

More sizes available.Weld charge extra.

HA250WCutting Capacity

Round (diameter) Ø1.18”~10” Rectangle (W x H) 11.8” x 10”

Work Load Capacity 3307 lbsBlade Size (L x T x W) 11’6” x 0.042” x 1-1/4”

Speed 89-295 ft./min, 60Hz Stepless Remnant Length 2.24” plus length of parts

Motor Blade 5 HP (3.7 kW)Machine Weight 3,087 lbs

Order # AMA-HA250WPrice $28,500 usd

F.O.B. USA Point of Shipment, Chicago or LA

HA400WCutting Capacity

Round (diameter) Ø1.18”~16” Rectangle (W x H) 16” x 16”

Work Load Capacity 5511 lbsBlade Size (L x T x W) 15’ x 0.050” x 1-1/2”

Speed 50-295 ft./min, 60Hz SteplessRemnant Length 3” plus length of parts

Motor Blade 7 HP (5.5 kW)Machine Weight 4851 lbs

Order # AMA-HA400WPrice $48,000 usd

F.O.B. USA Point of Shipment, Chicago or LA

Horizontal Automatic Metal Cutting Band Saws Extremely rigid construction for large capacity cutting of all types of metals.

Economically efficient and productive.

NOW AVAILABLE! At a Thomas Skinner Warehouse

near you...call for details.

Features• Multi indexing• Main split vise and rear vise (HA250W)• Main and rear vise (HA400W)• Variable blade speed drive• Full stroke clamping• Hydraulically driven chip conveyor• Blade break limit switch• Hydraulic blade tensioning• Powered chip brush• …and more!

Sample Pricing

#TSS-1461410QXP14’10” x 1” x 0.035” x 4-6 $71.20

#TSS-11423156QXP15’6” x 1-1/4” x 0.042” x 2-3 $83.00

TSS-112231810QXP 18’10” x 1-1/2” x 0.050” x 2-3 $127.95

Receive TWO FREE LENOX Bi-Metal Band Saw Blades plus a 5us gallon container of BAND-ADE Cutting Fluid with the purchase of a NEW HYDMECH band saw machine! Call for complete details.

THE ULTIMATE MULTI-PURPOSE BLADE FOR PRODUCTION CUTTING• Exceptional blade life with proprietary backing

steel preparation and robust M42 high speed steel edge.

• Cuts a wide range of metals from low carbon steels to higher strength alloys – extremely versatile.

Consistent performance cut after cut.• Use with aluminum/non-ferrous, mold steels,

carbon steels, stainless steels, alloy steels, tool steels, structural steels.

Bi-metal Band Saw BladeClassic Pro

TOOTH FORM TEETH PER INCH PRICE PER FOOTWIDTH THICKNESS 2/3 3/4 4/6 5/8

1” .035” t $3.70

1-1/4” .042” t $4.40

1-1/2” .050” t $5.40

Sample Pricing

#TSS-146136CL13’6” x 1”x 0.035” x 4-6 $55.80

#TSS-11434156CL15’6” x 1-1/4” x 0.042” x 2-3 $75.35

TSS-112341810CL 18’10” x 1-1/2” x 0.050” x 2-3 $110.00

Big performance in a small, compact package.HYDMECH DM-10’s are versatile, general purpose, medium duty double miter machines. Compact design make it ideal for use in tight working spaces. Cast iron head and vises are designed for rigidity, absorbing vibrations and ensuring accuracy during cutting.• Rectangular Capacity at 90°:

9 1/2" H x 11" W• Blade Size: 1" x 9’8"• HP: 2/2.5• Mitering: 45° left and right

F.O.B. Woodstock, ON. Installation extra.*A factory order Single Phase option is available.

More sizes available. t= Extra heavy set available to prevent blade pinching.

More sizes available. Weld charge extra.

Model Order # List $DM-10 (3-phase) HYD-DM103PH $9,600

F.O.B. Woodstock, ON. Installation extra.*Factory order Semi-Automatic (S-20P) model also available.

These Band Saws are in stock and available now!

S-20 SeriesPivot-Style Band Saws

The S-20 series scissor-style band saws feature a swing head design for miter cutting that saves operator set up time and shop space. Ideal for multiple light to medium duty applications. The automatic S-20A model features environmental-ly-friendly “On-Demand” hydraulics and an accurate and quick material indexing ball screw.

Model Order # List $S-20 Manual HYD-S20 $14,500

S-20 Fully Automatic HYD-S20A $32,900

LONG BLADE LIFE AT HIGH CUTTING RATES

TOOTH FORM TEETH PER INCH PRICE PER FOOTWIDTH THICKNESS 1.5/2 2/3 3/4 4/6 5/8 REGULAR PRICE

1” .035” $5.15 $4.35

1-1/4” .042” $5.70 $4.80

1-1/2” .050” $7.50 $6.35

DM-10 Manual Double-Miter Band Saws

• Rectangular Capacity at 90°: 13" H x18" W

• Blade Size: 1" x 14’10"

www.emuge.comGERMAN ENGINEERED AND MADE WITH

UNSURPASSED EMUGE QUALITY.

VANCOUVER 13880 Vulcan Way Richmond, BC V6V 1K6

EDMONTON9407 - 51st AvenueEdmonton, AB T6E 4W8

CALGARY4540 - 50th Avenue SECalgary, AB T2B 3R4

WINNIPEG820-D Berry StreetWinnipeg, MB R3H 1H2

Central Reception 604-276-2131 or 1-800-567-2131

Customer Service / Inside Sales 604-207-3117 or 1-866-999-3117

Service & Parts 604-207-3100 or 1-866-779-2131

Visit our website www.thomasskinner.com

PRICES IN EFFECT APRIL THROUGH JULY 2018 UNLESS OTHERWISE STATED.All CNC machines are F.O.B. as shown while quantities last. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm text, specifications and price with your Customer Service Representative. All items are new unless otherwise indicated. Pictures of items may not be exactly as

shown. All products are priced in Canadian dollars unless otherwise stated. All products are F.O.B. Thomas Skinner Branch unless otherwise stated. Prices are in effect until quantities last or while manufacturers special discounts are in effect.THOMAS SKINNER

SHIPPING POLICYFREE Shipping on all

stock consumable product orders over $100 & under

50lbs. Items will be shipped ground. Overnight air is available from any Thomas Skinner branch

direct to you for just $5. (Must be over $100 & under 10lbs to qualify for Overnight Air, available in BC, AB, SK and MB only)

Thomas Skinner Event Listings

The dates may be subject to change.Please watch your email for your invitation and more information!

Our website will also be updated so check out as well www.thomasskinner.com

DATE EVENT LOCATION

2018APRIL 4 METAL WORKING MANUFACTURING & PRODUCTION EXPO (MMPE) WINNIPEG, MBAPRIL 26 THOMAS SKINNER OPEN HOUSE CALGARY, AB MAY 2 METAL WORKING MANUFACTURING & PRODUCTION EXPO (MMPE) SASKATOON, SK MAY 9 THOMAS SKINNER OPEN HOUSE WINNIPEG, MBJUNE 4-5 SKILLS CANADA NATIONAL COMPETITION EDMONTON, ABOCTOBER 18 THOMAS SKINNER OPEN HOUSE EDMONTON, ABNOVEMBER 29 THOMAS SKINNER OPEN HOUSE RICHMOND, BC

EVENTS

Mark your calendars!3

NEW

• Sub-micro grain carbide• Coolant fed axial design• TIALN-T14 coated for additional tool life• 140˚-point angle• Double margin flute design on drill diameter• 90˚ included chamfer angle• Self-centering point geometry• Ex stock or 3-4-week lead time• No minimum quantity• Reconditioned at Emuge USA

Drill and Chamfer in one step. Save Time. Improve Quality. Quick Delivery.

• Made of premium high strength gage steel – durable.• A cleansing channel is ground into the GO side – eliminates thread

• Recessed minor thread diameter – safe functionality and to accommodate burrs.• Knurled handle – for maximum gripping ability and safety.• Reduced thread pilot diameter construction – easy insertion.• Short form certificate supplied at no charge. • Quick delivery. Ex-stock USA.

EMUGE GO/NO-GO Thread GagesWith EMUGE thread gages you can control production process safely and economically. Thread gages allow you to quickly recognize size and form deviations – weakened or unfit threads.

Also available: UNF 2B, UNC/UNF 3B, M/MF, NPT/NPTF, Self-Lock™ LK-UNC/LK-UNF

UNC 2B G-GR-LD ANSI/ASME B1.2

NOMINAL SIZE DIAMETER d1 T.P.I. ORDER# SPECIAL $

#1 64 EMU-L01001005000 155.80

#2 56 EMU-L01001005001 148.10

#3 48 EMU-L01001005002 126.00

#4 40 EMU-L01001005003 123.35

#5 40 EMU-L01001005004 115.60

#6 32 EMU-L01001005005 113.50

#8 32 EMU-L01001005006 109.05

#10 24 EMU-L01001005007 106.40

#12 24 EMU-L01001005008 101.80

1/4 20 EMU-L01001005009 100.68

5/16 18 EMU-L01001005010 105.80

3/8 16 EMU-L01001005011 107.80

7/16 14 EMU-L01001005012 112.35

1/2 13 EMU-L01001005013 122.75

9/16 12 EMU-L01001005014 127.20

5/8 11 EMU-L01001005015 132.35

3/4 10 EMU-L01001005016 150.45

7/8 9 EMU-L01001005017 175.20

1 8 EMU-L01001005018 193.45

1 1/8 7 EMU-L01001005019 219.40

1 1/4 7 EMU-L01001005020 219.40

1 3/8 6 EMU-L01001005021 259.50

1 1/2 6 EMU-L01001005022 283.00

Stepped Drills for Tapped HolesEF-Drill-C

NEWSTHE GENE HAAS FOUNDATION AND THOMAS SKINNER RENEW THEIR PARTNERSHIP WITH SKILLS/COMPÉTENCES CANADA

Edmonton2018

NEWS

Convenient Access Online! For your convenience, our Parts and Service department can also be reached online. It’s improved and mobile-friendly. All requests will be routed directly to our Parts and Service team to ensure prompt attention.

Service & Parts

Call Toll Free 1-866-779-2131Place your request for Service or Parts Online

by scanning one of the QR codes below.

SERVICE Request

Form

PARTS Request

Form

Or visit www.thomasskinner.com

GIVE IT A TRY NEXT TIME

PARTS & SERVICENEWS

www.thomasskinner.com

damage from dirt and grime

FREE SHIPPING

! FREE SHIPPIN

G! FREE SHIPPING! FREE

SH

IPPI

NG

! FRE

E

SHIPPING!

FREESHIPPING

See Canada’s best in skilled trades and technologies compete to become the national champion in their respective sector. Free event! Doors open to public daily at 8:30am.

Connect with industry and educational partners at the career fair and essential skills forum.

SKILLS CANADA NATIONAL COMPETITIONJUNE 4-5, 2018, EDMONTON EXPO CENTRE, EDMONTON (ALBERTA)

FREE EVENT

Thomas Skinner is proud to be a multi-year Gold Level Sponsor of Skills/Compétences Canada.