laser marking - schleuniger · laser marking is one of the fastest marking processes available on...
TRANSCRIPT
LASER MARKING
In-Line Wire and Cable Laser Marking System
Ergonomic laser marking workstation Vertical slide door for easy access Easy to use with minimal setup requirements Ideal for more challenging marking application Static or Dynamic (on the fly) wire and cable marking
Wire and Cable Laser Marking System
To Be Precise.
Concept Laser marking is one of the fastest marking processes available on the market, without requiring any consumables such as ink, solvents or marking foil. The laser beam produces a highly accurate, repeatable mark time after time. In the long run, laser marking is the most economical solution when wires or cables must be marked. Schleuniger has teamed up with the Exmore Group to create an inline cutting, stripping and laser marking system com-prised of the Exmore laser marking system and any one of Schleuniger‘s latest cut and strip machines. The entire system is controlled by Schleuinger’s Cayman Wirelist Processing Software and the Cayman Device Connector add-in.
Special Features Perfect for Challenging Marking Applications Laser marking is perfect for wires and cables that cannot be marked using other methods. The interaction between the laser beam and the material evaporates, engraves or colors the material resulting in a high contrast mark that is not removable and is resistant to water, chemicals, abrasion, heat, cold and UV radiation. Marking Versatility Text, logos, barcodes, time, date, and even sequential serial numbers can be marked anywhere along a wire or cable. Inline Integration Decreases Handling and Increases Efficiency Marking wires and cables as part on an inline mark, measure, cutting and stripping system ensures that the correct marks are placed at the proper location every time. Cables are automati-cally positioned and lasered, eliminating placement errors and reducing labor costs. Programmability Entire wirelists with all parameters can be stored in the Schleuniger Cayman software. Easily recall all wire and marking information in a few easy steps.
Optionsn Prefeeder (various models available)n Equipment racks with wire guides and straightenern Post processing (various coiler and stacker models available)
Tech
nica
l spe
cific
atio
ns s
ubje
ct t
o ch
ange
© S
chle
unig
er G
roup
360
8 Th
un, S
witz
erla
nd
Benefitsn Very accuraten Readability: high resolution, high contrastn Great accessibility n Low heat conductionn Versatile and permanent mark
Technical Specifications
Raw Material Type Wire & cable with different insulation types such as Teflon, PVC, PUR, etc.
Raw Material Diameter 3 - 32 mm (0.12 – 1.26”)
Marking Types End, continuous, others
Workpiece Length Determined by model of cut and strip machine
Breakout One strip length
Machine Compatibility EcoStrip 9380, MultiStrip 9480, PowerStrip 9550 and MegaStrip 9650
Weight 90 - 95 kg (198 – 209 lbs)
Dimensions (L x W x H) Working station: 450 x 550 x 515 mm (17.7 x 21.7 x 20.3”)Control Box: 550 x 106 x 106 mm (21.7 x 2.2 x 2.2”)
Processor Dual core
Laser Power 30W (standard fiber laser), also 20 and 50 Watt available
Marking Field Static Mode: Maximum 100 mm Dynamic (on the fly) Mode: Infinite length
Network TCP/IP
Lighting LED with dimmer switch
Power Supply 115 - 230VAC 50/60 Hz 600VA
Cooling Air or Water cooled upon laser type
Font Types Laser Font, True Type Font, Crystal Font, Open Type Font, Laser Font extended, Crystal Font extended, Free Type Font
Supported Files Cayman Article list files (*.cwl) and CSWIN ASCII import files (*.txt)
Barcodes EAN128C / EXT-2 (=EAN-2) / EXT-5 (=EAN-5)
2D Codes Data matrix, QR codes (square and rectangular)
Important Note Exmore Group recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a machine.
Laser Types Fiber (standard), Mopa, Green, UV, CO2, YAG
Character Examples
Tech
nica
l spe
cific
atio
ns s
ubje
ct t
o ch
ange
© S
chle
unig
er G
roup
360
8 Th
un, S
witz
erla
nd
To Be Precise.