large vertical multitasking machines - bulmakmetal ltd...the vtm multitasking machines feature a...
TRANSCRIPT
Large Vertical Multitasking Machines
Turretmilling tool spindle
Spindle
X axis
Z axis
1 2
Some photos in this brochure include optional specifications.
The VTM multitasking machines feature a flange
structured spindle mounted to a highly rigid
large bed, and a horizontally (X axis) moving
turret (milling tool spindlehead) attached to the
vertically moving (Z axis) saddle.
Large Vertical Multitasking Machines
Turning and multitasking applicationsfor the big diameter parts —growing globally
3 4
1,100
4520 100 500 2,0001,000 4,500
1
0.5
0.2
0.1
10
5
2
20
10
5
2
1
100
50
20
200130 N-m (15 min)95.5 N-m (cont)71.6 N-m (15 min)52.5 N-m (cont)
11 kW (cont)
The weight of the workpiece itself provides good contact on
the datum surface and make for highly accurate and stable
machining of thin-walled to big-diameter heavy components.
Chucking operations are easy and clamp conditions remain
stable. Making fixtures becomes simpler and less costly.
Spindle nose
OD
ID
Easy to mount/dismount of odd-shaped work
Vertical load
Spindle design
VTM-65
A2-11
ø200 (7.87)
ø110 (4.33)
mm (in.)
The main spindle has large-diameter roller bearings providing support at two locations to provide highly accurate rotations with no twisting or bending.
Top performance multitasking machines for the large diameter bearings and big flanges
ID
OD
Milling tool spindle design VTM-65 / VTM-100 / VTM-200
OSP-P300SMilling tool spindle speed: 4,500 min-1
AC 15/11 kW (20/15 hp) (15 min/cont)
130/95.5 N-m (96/70 ft-lbf)
The turret (milling tool spindle) accepts both
turning and milling tools. There is no interference,
and setup jobs are also easy.
The spindle nose is a BIG-PLUS BT 50 (dual
contact); very accurate and sturdy.
When turning, the curvic coupling locks to
provide plenty of support for heavy-duty and
continuous cutting.
The integral motor/spindle drive has no gears
or belts. That means multitasking applications (fat
drilling to nimble tapping) are highly productive.
The turret itself is weight counterbalanced for
smooth Z-axis feeds from the low to high speeds.
ATC armX+X-
186.3
11.4221.48
1045
3(1.5) (38)
20
36.5
35 -0.10
101.8±0.2136.8±0.2 23.5
156832
45 21
80
P.C.D101.6
25.4
25.4
45°
60°
ø85
ø23
ø17
ø69.
85
MASII
NST No.50
ø100
ø69.
85ø1
28.5
7
60°
N0.50
Curvic locked when turning
The 36-tool ATC magazine really reduces setup times and increases machine utilization rates.
Larger tool magazines are also available for a wider range of workpiece applications. (60, 120 tool magazines)
Turning tool lock block
Spindle speed min-1
Sp
ind
le t
orq
ue
Mot
or o
utp
ut
N-m kW
Auto Tool changer
Tool shank size ( ) : BIG-PLUS
(Gauge line)
Coolant hole
VTM-100
A2-11
ø200 (7.87)
ø110 (4.33)
VTM-200
ø380 flat
ø260 (10.24)
ø160 (6.30)
5 22 42 56 84 167 20010 100
1
10
30
500
1,000
5,000
10,000
30,000
VTM-200 OSP-P300SSpindle speed: 250 min-1
AC 30/22 kW (40/30 hp) (30 min/cont)
12,852/8,568 N-m (9450/6300 ft-lbf) (30 min/cont)
Spindle speed min-1
Sp
ind
le t
orq
ue
Mot
or o
utp
ut
N-m kW
10 100 1,000193 840 1,250
1
10
30
50
100
500
1,000
3,000
VTM-65 OSP-P300SSpindle speed: 1,250 min-1
AC 30/22 kW (40/30 hp) (30 min/cont)
1,483/1,088 N-m (1090/800 ft-lbf) (30 min/cont)
Sp
ind
le t
orq
ue
Spindle speed min-1
Mot
or o
utp
ut
N-m kW
6 13 100
111
1,000250
1,1111,250
1
10
30
50
100
500
1,000
3,000
VTM-100 OSP-P300SSpindle speed: 1,250 min-1
AC 30/22 kW (40/30 hp) (30 min/cont)
2,579/1,891 N-m (1896/1390 ft-lbf) (30 min/cont)
Spindle speed min-1
Sp
ind
le t
orq
ue
Mot
or o
utp
ut
N-m kW
Machining capacity
OD : ø4.2 mm2 (ø2,000)
ID : ø6.0 mm2 (ø1,500)
Turning (Actual data) (0.007 in.2 : ø78.74 in.)
(0.009 in.2 : ø59.06 in.)
VTM-200 (S45C)
15 kW (15 min)
30 kW (30 min)20 kW (cont) 22 kW (cont)
12,852 N-m (30 min)8,568 N-m (cont)
6,854 N-m (30 min)5,027 N-m (cont)
30 kW (30 min)
22 kW (cont)1,483 N-m (30 min)
1,088 N-m (cont)
30 kW (30 min)22 kW (cont)1,891 N-m (cont)
1,147 N-m (30 min)840 N-m (cont)
2,579 N-m (30 min)
5 6
*1. Maximum workpiece loading mass when spindle speed is limited/spindle speed limit *2. Machine only; w/o chuck and ATC magazine *3. OSP: 30,140, FANUC: 29,700 lb
VTM-65ø650 (25.59)ø750 (29.53)
635 (25)
500 (19.69)635 (25)
OSP: Infinitely variable
1,105 (43.50)
18 (59.06)20 (65.62)
OSP: 4,001 x 2,990 (158 x 118)FANUC: 4,001 x 3,030 (158 x 119)
4,000 (157)11,000 (24,200)*2
VTM-100ø1,000 (39.37)ø1,000 (39.37)
840 (33.07)
650 (25.59)840 (33.07)
1,150 (45.28)
OSP: 4,286 x 3,175 (169 x 125)FANUC: 4,286 x 3,205 (169 x 126)
4,300 (169)OSP:13,700, FANUC:13,500*2 *3
OSP-P300S, FANUC-31i-B
VTM-200ø2,000 (78.74)ø2,400 (94.49)1,200 (47.24)7,000 (15,400)
[8,500 kg/65 min-1]*1
1,600 (62.99)1,200 (47.24)
ø380 flatø260 (10.24)ø160 (6.30)
ø164 (ø6.46) / 2˚1,240 (48.82)
0.001 to 500
10
OSP: 5,557 x 5,251 (218 x 206)
4,570 (179)27,000 (59,400)*2
800 (1,760)[2,000 kg/200 min-1]*1
360 degrees0.001
2-point roller bearing spindle supportATC single tool
25 x 25, 32 x 32 (1 x 1, 1-1/4 x 1-1/4) ø40, ø50 (ø1-1/2, ø2)
OSP: 2,000 (low speed) 4,500 (high speed)FANUC: 1,000 (low speed) 4,500 (high speed)
FANUC: 2 auto ranges (coil switching) 7/24 taper bore No. 50 BT50 (BIG-PLUS®)
ø90 (3.54) BT50 MAS II 36 (60)
Fixed adress typeø170 (ø6.70) [w/o adjacent ø250 (ø69.85): 500 L (19.69), ø300 (11.82): 450 L (17.72)]
500 (19.69) [touch setter gauging length Max 360 (14.18)] 30 (average 20)
OSP: VAC 30/22 (40/30) (30 min/cont)FANUC: AC 30/22 (40/30) (30 min/cont)
OSP: AC 15/11 (20/15) (15 min/cont)FANUC: AC 7.5/5.5 (10/7.5) (15 min/cont)
Coolant tankPump motorChip flusherShower
VTM-65
400 L (105.7 gal)
VTM-100
450 L (118.9 gal)
VTM-200ø380 flat, 3 to 200 min-1
30/22 kW (40/30) (30 min/cont)
1,000 L (264.2 gal)0.55 kW (3/4 hp)
0.55 kW (3/4 hp) (Opt)
B-1––
No.50, 4,500 min-1
OSP: 15/11 kW (20/15) (15 min/cont), FANUC: 7.5/5.5 kW (10/7.5) (15 min/cont)MAS BT50 (BIG-PLUS®)
36 tool magazine
0.75 kW (1 hp)
������
A2-11, 15 to 1,250 min-1
30/22 kW (40/30) (30 min/cont)
1.2 kW (1.6 hp)
A-1Parameter
��: 1 set
OSP: 2 auto ranges (coil switching)
16 (52.50)16 (52.50)
Capacity
Travels
Work Spindle
Turret(tool spindle)
Milling ToolSpindle
Tool Change
Feed Axes
Motors
Machine size
Control
Standard Accessories
Standard Specs
Max machining diameterMax swing diameterMax machining lengthMax workpiece load(including chuck)X axisZ axisC axisC-axis minimum input incrementSpindle speed
Spindle speed rangesType of spindle noseSpindle front bearing IDThrough-hole diameter Diameter / taperFloor to spindle noseSpindle supportTurret typeStandard toolBoring bar diameterMaximum spindle speed
Spindle speed rangesSpindle shapeFront diameterTool shankPull studMax tools (magazine capacity)Tool selectionMax tool diameterMax length (from gauge line)Max tool weightCutting federate X, Z
Rapid feedrate
Workpiece spindle motor
Milling tool motor
Required floor space (L x W)
HeightWeight
X axisZ axisC axis
Unitmm (in.)mm (in.)mm (in.)
kg (lb)
mm (in.)mm (in.)
degdeg
min-1
mm (in.)mm (in.)
mm (in.)
mm (in.)mm (in.)
min-1
mm (in.)
tool
mm (in.)mm (in.)
kgmm/rev
m/min (fpm)m/min (fpm)
min-1
kW (hp)
kW (hp)
mm (in.)
mm (in.)kg (lb)
Item
Machine Specifications
Standard Specifications and Accessories
Spindle
Milling Tool Spindle
Tool ShankAutomatic tool changer
Coolant system
Full enclosure shielding (w/ceiling)Jack screws, foundation padsWork lampOperation end buzzer (electric)Tool kitFront door interlockLubrication monitorChuck clamp direction switchChuck open/close pushbutton switch
OSP: 10 to 1,250FANUC: 10 to 500 (low speed)
10 to 1,250 (high speed)
OSP: 6 to 250 (low speed)13 to 1,250 (high speed)
FANUC: 6 to 416 (low speed)13 to 1,250 (high speed)
20
0.001 to 462.000
JIS A2-11 ø200 (7.87) ø110 (4.33)
ø115 (ø4.53) / 1/20
OD,axial finishing
�32 [�25]
Copying�32 [�25]
Drills Boring bars ID,roughing
�25
IDfinishing
�25
IDcopying
�25
Boring bar sleeveBS 32-H50
Drill sleeveDS MT 1-H40DS MT 2-H40DS MT 3-H40DS MT 4-H40
Boring bar sleeveBS 12-H40BS 16-H40BS 20-H40BS 25-H40
OD toolholderOD-I-32(OD-I-25)
Axial toolholderOD-II-32(OD-II-25)
ID toolholderID-H50(ID-H40)
ID special toolholderID-H25S
OD,axial roughing
�32 [�25]
ø50 (ø40)Boring bar
5 to 84 (low speed)10 to 200 (high speed)
Tooling System
Chip discharge
Chip conveyor types and applications
Optional Specifications and AccessoriesSpindle speed specials(30 min/cont)Milling tool spindle speedRotary tool thru-spindle coolantHydraulic power chuck(solid)Chuck open/close pedal Chucking miss detectionChuck auto open/close confirmChuck clamp direction switchChuck pressure high/low changeManual chuck
Work table (VTM-200)
Chip conveyor
Chip bucketATC magazine tool capacity
VTM-100 (OSP): 1,000 min-1 45/37 kW (60/50 hp)*1
VTM-100 (FANUC): 600 min-1 30/22 kW (40/30 hp)*1
No. 50 6,000 min-1 (VTM-65, VTM-100 only)1.5, 3.5, 7 MPaVTM-65: H01MA-18, H01MA-21, H01MA-24VTM-100: H01MA-24, H01MA-28, H01MA-32, H01MA-36Std: Pushbutton switch type (VTM-65, VTM-100 only)VTM-65, VTM-100 onlyVTM-65, VTM-100 onlyKey switch type (VTM-65, VTM-100 only)Grip change required (VTM-65, VTM-100 only)VTM-65 Three- jaw scroll chuck: 21", 24"
Four-jaw independent chuck: 20", 24" VTM-100 Three- jaw scroll chuck: 24", 28", 32", 36"
Four-jaw independent chuck: 24", 28", 32", 36" ø2,000Work table jaws; 4-jaw set, hard/soft jawsVTM-65, VTM-100 Rear: Hinge type, scraper type, magnet scraper typeVTM-200 Side: Hinge type, drum filter typeTilt; with / without60 tools; chain120 tools; matrix
Auto front cover open/closeSpecial coolant pumpCoolant gun Oil skimmer Coolant level detection Chuck air blower (blast) Turret air blower (blast) Air gun Mist collector Jib crane In-process work gauging Touch setter
AbsoScale Scale feedback Coolant temp regulator Raised machine
Tooling kitAutomation specs
1.5 kW 0.25 kW VTM-200 std VTM-65, VTM-100 onlySide through, turning tools only 200 kg (440 lb) (VTM-65, VTM-100 only)Radius, diameter measurementsManual axisAuto/manualOSP X-axis*2
FANUC X-axis*2
Separate tank100 mm (VTM-65, VTM-100 only)150 mm (VTM-65, VTM-100 only)OD-I, OD-II, ID-H50; 4 sets eachRobotAPC
*1. Gear change *2. VTM-200: X-axis + Z-axis application available
* Note: Raised machine specs (platform) may be required depending on the conveyor type.
Hinge type Scraper type Magnet scraper type With drum filter*
�For steel �For castings �For castings�For steel, castings,
nonferrous metal
�Magnet scraper moreeffective for sludge disposal
�Easy maintenance�Blade scraper
�General use �Effective with sludge�Not suited for nonferrous
metals
�Filtration of long and shortchips and coolant
�Hinge + Scraper type
Magnet
VTM machines designed for smooth chip flow, and when coupled
with the “chip flusher”; chip discharge is complete.
Name
Application
Features
Shape
7 8
Max Workpiece and Working Ranges Okuma’s new control for multitasking machines
“Easy Operation”
OSP-P300S
Toolregistration
Tooloffsets
Soft jawmachining
Zerooffsets
Previous OkumaCNC
360strokes
190 strokes(47% reduction)
�
Rapid feed, cutting feed, and spindle override adjustments are easier with these rotary switches. The red keys are easy to spot and stop an operation.
Smooth and simple manual machine operations, because the Control was built by Okuma—a “Machine & Control” manufacturer
� Significant reduction in number of keystrokes(actual data)
�During an operation, you can simultaneously view in a 4-split screen; current positions, and screens from various applications (Collision Avoidance System, Advanced-One Touch IGF, part programs)—to confirm machine conditions at a glance.
The display screen
�Being able to perform tool preps for the many tools required in multitasking applications—in one screen—provides enormous benefits.
Easy tool preparations
Grouped axis feed buttons(C-axis on/off possible)
Spindle operation groupGrouped M-spindleoperations
Tool magazine index useful when changing tool inserts
Spindle clamp useful when mounting jaws
Turret position selector matches actual turret indexed position
OSP-P300SOkuma Sampling Path Control
VTM-65 working ranges
VTM-100 max workpiece
VTM-200 max workpiece
VTM-100 working ranges
VTM-200 working ranges
Travel 1,600 (62.99) 115(4.53)225
(8.86)1,375 (54.13)
20 (0.8
9)19
5(7
.68)
Trav
el 1
,200
(47.
24)
1,31
5 (5
1.77
)
ø1,400 (55.12)2,000 (78.74)
1,490 (58.66)
861
(33.
90)
339
(13.3
5)1,
200
(47.
24)
115
(4.5
3)
110(4.33)
1,490 (58.66)Travel 1,600 (62.99)
Min drill hole: ø170
OD-I
ID-H50 ID-25S
161(6.34)
120
(4.72)
120
(4.72)
1,27
0 (5
0)
55 (2.17) 30(1.18)
Trav
el 1
,200
(47.
24)
210
(8.2
7)1,
150
(45.
28)
Max 150
(5.91
)
VTM-65 max workpiece
ø50(1.97)
35(1.38)
120
(4.7
2)12
0(4
.72)
930
(36.
61)
Trav
el 8
40 (3
3.07
)Travel 650 (25.59) 115
(9.53)
158(6.22)
620 (24.41)
145(5.71)
505 (19.88)
Travel 650 (25.59)
ø1000 (39.37)ø860 (33.86)ø370 (14.57)
620 (24.41)
55 (2.17) 30(1.18)
30(1.18)20
(0.7
9)19
5(7
.68)
975
(38.
39)
Trav
el 8
40 (3
3.07
)21
0(8
.27)
810
(31.
89)
Max
150
(5.9
1)
Min drill hole: ø170
ø50(1.97)
[min
135
(5.3
1)]
35(1.38)
840-
A (3
3.08
-A)
400-
A (1
5.75
-A)
240
(9.4
5)20
0 (7.8
7)
OD-I ID-H50 ID-25S
OD
tur
ning
low
er li
mit:
A
120
(4.7
2)12
0(4
.72)
810
(36.
61)
Max
150
(5.9
1)
Trav
el 6
35 (2
5)
ø50(1.97)
Travel 500 (19.69)
Travel 500 (19.69)
ø400 (15.75)ø550 (21.65)ø650 (25.59)
355(13.98)
145(5.71)
115(9.53)
470 (18.50)
30(1.18)
30(1.18)
195-
A(7
.68-
A)24
0 (9
.45)
635-
A (2
5-A
)
[min
220
(8.6
6)]
35(1.38)
200 (
7.87)
195
(7.6
8)20
(0.7
9)
trav
el 6
35 (2
5)
470 (18.50)158
(6.22)
210
(8.2
7)69
0 (2
7.17
)
855
(33.
66)
Min drill hole: ø17055 (2.17)
OD-I ID-H50 ID-25S
OD
tur
ning
low
er li
mit:
A
Control
Position feedback
Min / Max inputs
Feed
Spindle control
Tool commands
Tool compensation
Display
Self-diagnostics
Program capacity
Easy operation
Collision Avoidance
System (CAS)
Programing
Machine operations
MacMan
Com / Net
Basic Specs
Operations
simultaneous multitasking of X, Z, C axes
OSP full range absolute position feedback (zero point return not required)
8-digit decimal, ±99999.999 ~0.001 mm, 0.001˚ Decimal:1 µm, 10 µm, 1 mm (1˚, 0.01˚, 0.001˚)
Override: 0 to 200%
Direct spindle speed commands (S5) override 50 to 200% Constant cutting speed, max turning speed designate
2-digit tool no. + 4-digit tool no. (max tool registration: 1000 sets)
Tool offset: 20 sets per tool Tool wear comp: 20 sets per tool Nose R comp: 20 sets per tool
15-inch color display operational panel, touch panel
Automatic diagnostics and display of program, operation, machine, and NC system problems
Program storage: 2 GB, operation buffer: 2 MB
“Single-mode operation” for a series of operations from a single screen. Bundled tool control: tool shape, tool tilt, tool offsets
per tool number. Tool data sharing between machining operations, One-Touch IGF, Collision Avoidance System. Easy-to-use
operation panel supports complete machine control.
Prevents interference during manual, automatic operation Easy modeling of shape data
(there are limits in interference prevention unit, unit movement)
Program management, edit, multitasking, scheduled programs, fixed cycles, special fixed cycles, tool nose R compensation,
slope machining, M-spindle synchronized tapping, fixed drilling cycles, arithmetic operations, logic operations, math
functions, variables, branch statements, auto programming (LAP4), programming help
MDI, manual (rapid traverse, manual cutting feed, pulse handle), load meter, operations help, alarm help, sequence return,
manual interrupt & auto return, data I/O, pitch error compensation (X, Z, C), spindle orientation (electric)
Machining Management: machining results, machine utilization, fault data compile & report, external output
USB ports, Ethernet
Standard Specifications
9 10
FANUC 31i-BOSP-P300SStandard Specifications
Optional Specifications
Controlled axes
Interpolation
Command system
Least input increment
Max/min input
Operation panel
Monitor function
Operation
Program input
Compensation
5: X, Y, Z, B, C, (3 simultaneously excluding B-axis), scale feedback (X-Y-Z axes)
Positioning, linear, taper, circular, threading
Polar coordinate interpolation, Cylindrical interpolation
Absolute / incremental
X-, Z-axes all 0.001 mm
±99999.999 mm, decimal point programming
10.4 in color TFT
Languages: English/Japanese
Run hour and parts count display
Electric buzzer
Constant surface speed control
Al contouring control I
Cs contouring control
Spindle orientation (1 position, M19)
M spindle rigid tapping
Part program storage: 64 KB, (160 m)
No. of registerable programs: 63
Extended part program editing
RS-232-C input/output interface
Programmable data input
Program protect key switch
Canned cycles for drilling
Continuous threading
Circuit interpolation by R programming
Memory pitch error compensation (X + Z + C-axis)
Tool geometry/wear compensation
Tool offset pairs: 64
Monitor function
Operation
Program input
Compensation
Other functions
Power ON
Yellow, triple lamp
Spindle + feed axes
Electrical, total 4 positions
Fixed compensation
5 levels, 7 levels
128KB (320m)
256KB (640m)
512KB (1280m)
1MB (2560m)
2MB (5120m)
4MB (10240m)
8MB (20480m)
125, 250, 500, (1000, 2000, 4000)
Digital switch (2 digit display)
Add. common variables (total 600)
G54 to G59
I, II
4, 8 pairs
99
200
400
499
Temperature regulator, dehumidify
Graphics display
Tool counter
Work counter
Multi-counter
Hour meter
Status indicator
Tool life management
Abnormal load detection
Continuous threading
Spindle orientation
Off-machine work gauging
interface
Manual pulse generator
Power shutoff
Circuit breaker
Part program storage
capacities
Extended no. of registerable programs
External program select
Add. RS-232-C channels
Custom macros
Custom macros
Inch/metric switch
Workpiece coordinate systems
Helical interpolation
Canned cycles for multitasking
Multiple program simultaneous editing
Program restart
Spare M codes
High speed skip
2nd geometry tool offset
Tool offset pairs
Control cabinet lamp
Control cabinet ventilator* Note 1: NML: Normal, 3D: Real 3D simulation, E: Economy, D: Deluxe* Note 2: * Technical consultations required.� Indicates essential specifications
Optional specs NML
DE DE DE
3D One-Touch M
Optional Specifications
Operation functions
Advanced One-Touch IGF (multitasking)
Programming
Coordinate system selection 10 sets
50 sets
100 sets
Circular threading
Program notes
User task 2 Input/output variables 8 each
Tool comps 96 sets
200 sets
Common variables: 1000 (Std: 200)
Thread matching
Threading slide hold (G34, G35)
Variable spindle speed threading (VSST)
Inverse time feed
Spindle dead-slow cut
Spindle acceleration setting
Coordinate change
Profile generation
Monitoring
Collision Avoidance system*
Machining Navi L-g
One-Touch Spreadsheet
Real 3-D simulation*
Cycle time over check
Load monitor (spindle, feed axis)
Load monitor no-load detection (load monitor ordered)
Tool life management
Workpiece
counters
Hour meters
NC operation monitor (counter, totaling)
Operation end lamp (yellow)
Alarm lamp (red)
Electric buzzer
Status indicator (triple lamp) Type C
Measuring
In-process work gauging
Post-process work gauging I/F
Z-axis automatic zero offset by touch sensor
C-axis automatic zero offset by touch sensor
Gauging data printout, file output
External I/O, communication functions
Additional RS-232-C channel [1 chan, 2 chan]
(standard specs include 1 channel)
Additional USB 2 additional ports possible
DNC link
Automation / untended operation
Harmonic spindle speed control (HSSC)
Power shutoff, M02, Alarm
Warm-up function (by calendar timer)
Tool shelter cycle
Externalprogramselections
Cycle time
Reduction*
High-speed/ high-accuracy functions
AbsoScale (X-axis) (X + Z-axis: VTM-200 only)
Hi-cut Pro
Other functions
Potable pulse handles
Circuit breaker
External M signals (2, 4, 8, 16 sets)
Edit interlock (C)
Count only, ( ) pcs
Cycle stop, ( ) pcs
Start disabled ( ) pcs
Power ON
Spindle run-time
NC operating
A (pushbutton) 8 types
B (rotary switch) 8 stages
C1 (digital switch) BCD, 2-digit
C2 (external input) BCD, 4-digit
Operation time reduction
DNC–T3
DNC–C / Ethernet*
DNC–DT
FL–net*
� (Essential)
Included in machine specs
Included in machine specs
VTM-65Dimensional and Installation Drawings(OSP-P300S)
VTM-100Dimensional and Installation Drawings(OSP-P300S)
MA
X 4
,000
(157
.48)
4,081 (160.67)1,786 (70.31)2,040 (80.31)
490(19.29)
1,36
0(5
3.54
)54
0(2
1.26
)
3,62
0 (1
42.5
2)
1,10
5 (4
3.5)
1,02
4 (4
0.31
)
36-tool magazine
ATC arm
Swing ø750
(29.53)
3,945 (155.31)1,574 (61.97)940
(37.01)
1,974 (77.72) 775(30.51)
590(23.23)
4,71
5 (1
85.6
3)
380(14.96)
673(26.50)
2,437 (95.94)2,800 (110.24) 205 (8.07)3,005 (118.31)690
(27.17)
714
(28.
11)
660
(25.
98)
1,10
0 (4
3.31
)2,
260
(88.
98)
1,33
0(5
2.36
)50
0(19
.69)
467
(18.
39)
Chip bucket (Opt)
Coolant gun (Opt)
Chip conveyor (Opt)
2,962 (116.61)940
(37.01)3,005 (118.31)
852(33.54)
3,20
9 (1
26.3
4)1,
400
(55.
12)
922
(36.
3)80
0 (3
1.5)
1,60
0 (6
2.99
)
380(14.96)
673(26.5)
2,607 (102.64)2,950 (116.14) 95 (3.74)
3,045 (119.88)710(27.95)Coolant gun (Opt)
Chip conveyor (Opt)
ATC arm
FL
4,85
0 (1
90.9
4)
564
(22.
2)
945
(37.
2)1,
100
(43.
31)
2,56
0 (1
00.7
9)50
0(1
9.69
)46
7(1
8.39
)
Chip bucket (Opt)
MA
X 4
,300
(169
.29)
4,020 (158.27)1,574 (61.97)975 (38.39)
1,974 (77.72) 825(32.48)
590(23.23)
3,137 (123.5)975
(38.39)3,045 (119.88)
852(33.54)
1,37
0(5
3.94
)54
0(2
1.26
)
3,78
0 (1
48.8
2)
3,20
9 (1
26.3
4)1,
540
(60.
63)
932
(36.
69)
800
(31.
5)
1,60
0 (6
2.99
)
36-tool magazine
4,366 (171.89)1,651 (65)
FL
2,435 (95.87)600
(23.62)
1,15
0 (4
5.28
)97
9 (3
8.54
)
(Man
ual t
ool
chan
ge u
nit)
60-tool magazine (Opt)
Transformer
Transformer
Manual toolchange unit
Manual toolchange unit
60-tool magazine (Opt)
(Man
ual t
ool
chan
ge u
nit)
1,33
0 (5
2.36
)
1.5 MPa M-spindlethru-spindle coolant unit (Opt)
1.5 MPa M-spindlethru-spindle coolant unit (Opt)
Swing ø1,000 (39.37)
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
� The sp
ecifications, illustrations, and d
escriptions in this b
rochure vary in different m
arkets and
are subject to change w
ithout notice.P
ub N
o.VTM
series-E-(9)-500 (A
ug 2013)
When using O
kuma p
roducts, alw
ays read the safety p
recautionsm
entioned in the instruction m
anual and attached
to the prod
uct.
This product is subject to the Japanese government Foreign Exchange and Foreign Trade Control Act with regard to security controlled items; whereby Okuma Corporation should be notified prior to its shipment to another country.
, OGUCHI-CHO, NIWA-GUN, AICHI 480-0193, JAPAN • TEL (0587) 95-7825 • FAX (0587) 95-6074
VTM-200Dimensional and Installation Drawings(OSP-P300S)
Large V
ertical Multitasking
Machines
Hyd unitCNCcabinet
Cooling unit
Spindle lube unit
Lube unit
(Swing
)(Table dia)
4,96
0(1
95.2
8)84
1(3
3.11
)
Air inlet (3/8)
1,30
0(S
pace
for s
ide
tank
rem
oval)
1,64
0(6
4.57
)1,
330
(52.
36)
669(26.34)
781(30.75)
2,000 (78.74) 2,111 (83.11)
ø2,000
ø2,40
0
676
(26.
61)
Swing door(manual)
Slide door (manual)(Opt: Auto door) Monitor door (manual)
Operation panel
1,450 (57.09) 3,055 (120.28)845(33.27)
2,530 (99.61) (Door opening)
(Slide door opening)1,665 (65.55)865
405 1,260
1,340(52.76)
1,600 (62.99)(X-axis travel)
110(4.33)
1,490(58.66)
5,561 (218.94)1,0564,505 (177.36)
800 (31.50)(margin)
800 (31.50)(margin)
845(33.27)
Table top
4,60
3 (1
81.2
2)
1,45
0(5
7.09
)1,
200
(47.
24)
(Z-a
xis tr
avel)
100
(3.9
4)
Operator position
60-tool magazine(Opt)
5,258(207.01)
1,300(Space for sidetank removal)
1,15
0(4
5.28
)1,
003
(39.
49)
2,45
0(9
6.46
)
125
1,197(47.13)
3,83
0 (1
50.7
9)
800
(31.
50)
1,20
0 (4
7.24
)
525
(20.
67)
36-tool magazine