lamett - maintenance instruction · lamett - maintenance instruction - imperial after installation:...
TRANSCRIPT
Lamett - maintenance instruction- Imperial
After installation: maintenance with Liquid Wax CleanerOsmo Liquid Wax Cleaner is specially designed for ini-tial cleaning and the regular refreshing of your � oor.
Shake the container carefully. The � oor must befree from dust before treatment.
Apply with a cloth a thin layer of Liquid Wax Cleaner on the dry clean � oor. Use 2 teaspoons per 1m². One can is enough for 80-100m².
Remove excess maintenance wax with a cloth, if there was too much wax applied, this will form a greasy layer.
Leave the � oor to dry after application of the product.
Regular maintenance with Osmo Wash & Care Osmo Wash & Care is specially designed for the maintenance of wooden surfaces treated with Osmo Hardwax Oil.
The � oor must be free from dust before treatment. Shake the container carefully.
Add 1 cap of Wash & Care per liter water.
Treat with a light wrung � oor cloth or moplengthwise of the � oor. Osmo Wash & Care doesn’t form a � lm on the surface and can be used as often as necessary without leaving residues.
If necessary clean with a dry cloth to prevent water penetrating into joints our � oor boards. Leave the � oor to dry before use.
Annual maintenance with Liquid Wax CleanerUse the Osmo Liquid Wax cleaner for annual mainte-nance of your � oor. Follow the instructions as described on top of the page.
1
4
3
2
1
43
2
The � oor must be free from dust before treatment. Shake the container carefully. 1
water penetrating into joints our � oor boards. 4
Treat with a light wrung � oor cloth or mop
doesn’t form a � lm on the surface and can be
3
Add 1 cap of Wash & Care per liter water.2
Lamett © • www.lamett.eu1l Wash & Care | 1l Liquid Wax Cleaner
1
43
2