lae tool space
TRANSCRIPT
WELFAREHIRESOLUTIONS
LAE TOOL SPACEMOBILE WELFARE CABINS
The ‘LAE Tool Space’ has been developed to allow the safe storage of tools and equipment on-site. There are also increasing restrictions on what vans can carry and this especially has an impact for businesses involved with the many utility contracts.
Often the requirement will mean running from a central yard that requires the vans to load up the tools in the morning and
returning at the end of every day, impacting on the working time available. Clearly it would be more productive to leave the tools on-site.
Additionally leaving tools in the secure ‘LAE Tool Space’ helps reduce the weight and space issues of the workforces vans.
Technical Details
Net Weight: 1200kg
Capacity: 750kg
Unit Length: 3.60 metres
Unit Width: 2.30 metres
Unit Height: 2.37 metres
Towing Length: 5.20 metres
Towing Height: 2.69 metres
INTRODUCING LAE TOOL SPACEThe anti vandal mobile tool store.
Tool Space
Main Storage Area
WELFAREHIRESOLUTIONS
LAE TOOL SPACEMOBILE WELFARE CABINS
Tel: 01695 722 833
Mob: 07436 100689
Fax: 01695 556 865
Email: [email protected]
Web: www.welfare2go.co.uk
LAE Welfare Hire SolutionsUnit 1 Garnett Place, Skelmersdale Lancashire WN8 9UB
Features and Benefits Detail
Options
We have designed the ‘LAE Tool Space’ around the standard mobile welfare unit which has a number of benefits:
3 cabin doors for greater access, 1 on the side and 2 at the rear.
Visually looks like our ‘Comfort Space’ Welfare Unit, attracting less attention.
Hydraulically lowered axle arrangement is carried over so when located on-site the ‘LAE Tool Space’ is very easy to load and unload.
Anti-vandal design incorporating double locking door mechanism.
Locking towing cover hood with integrated ‘swivel’ jockey wheel which prevents the loss of individual wheel type assembly.
As with all LAE Welfare Hire Solutions the ‘LAE Tool Space’ is constructed of high quality steel, corrugated for increased strength and our very secure anti vandal locking mechanism.
Inside we can configure the ‘LAE Tool Space’ to your individual requirements. All our units are finished with a quality ply lined interior for all the walls and roofing. The floor is finished with a high-quality treated load bearing ply and then finished with a fuel and containment resistant anti slip surface.
Some of the options available are:
Partitioned to allow area for heavier items like vibrating tampers, wheel barrows and heavy digging implements.
Racking for small items like consumables, fixtures and fittings.
Hose racks.
Fuel storage.
Once lowered the hydraulic remote control switch can be isolated from the inside leaving the ‘LAE Tool Space’ as a very secure place to leave your businesses tool on-site.
Tool Space Lowered
Hydraulic Isolator
Hydraulic Remote Control Racking