ladle hooks & beams - bushman.com · ladle beams with ladle hooks or j-hooks are used to ......

2
USA CANADA 800-338-7810 800-844-8117 [email protected] [email protected] Solving Material Handling Problems Below-The-Hook Floor Based www.bushman.com BELOW-THE-HOOK EQUIPMENT Ladle beams with ladle hooks or J-hooks are used to transport molten metal safely. Features: Laminated, riveted and welded steel hooks designed to AIST Technical Report No. 7. Hardened steel pins. Forged steel or fabricated chase blocks. Removable wear strips and bronze bushings. Paper roll sister-style hooks with bronze palm bushings, radial keys and keeper plates Palm bushings protect the paper roll or ladle trunion from wear. Radial key retains the palm bushings in place. Four 260-ton riveted laminated ladle hooks with bronze palm bushings, welded bumper stops and 1040 steel eye bushings. LADLE HOOKS & BEAMS 70-ton lifting bail with ladle hooks, chase blocks and pins. An 80-ton capacity reeved in power rotating ladle beam with fabricated chase blocks and ladle hooks with bronze palm bushings and hardened steel eye bushings. These 80-ton capacity riveted ladle hooks are for the 80ton ladle beam above.

Upload: dinhkhanh

Post on 12-May-2018

243 views

Category:

Documents


8 download

TRANSCRIPT

Page 1: LADLE HOOKS & BEAMS - bushman.com · Ladle beams with ladle hooks or J-hooks are used to ... Features: Laminated, riveted and welded steel hooks designed to AIST Technical Report

USA CANADA800-338-7810 800-844-8117 [email protected] [email protected]

Solving Material Handling ProblemsBelow-The-HookFloor Based

www.bushman.com

BELOW-THE-HOOK EQUIPMENT

These 80-ton capacity rivete

Ladle beams with ladle hooks or J-hooks are used to transport molten metal safely.

Features: Laminated, riveted and welded steel hooks

designed to AIST Technical Report No. 7. Hardened steel pins. Forged steel or fabricated chase blocks. Removable wear strips and bronze bushings.

Paper roll sister-style hooks with bronze palm bushings, radial keys and keeper plates Palm bushings protect the paper roll or

ladle trunion from wear. Radial key retains the palm bushings in place.

Four 260-ton riveted laminated ladle hooks with bronze palm bushings, welded bumper stops and 1040 steel eye bushings.

LADLE HOOKS & BEAMS

70-ton lifting bail with ladle hooks, chase blocks and pins.

An 80-ton capacity reeved in power rotating ladle beam with fabricated chase blocks and ladle hooks with bronze palm bushings and hardened steel eye bushings.

These 80-ton capacity riveted ladle hooks are for the 80ton ladle beam above.

Page 2: LADLE HOOKS & BEAMS - bushman.com · Ladle beams with ladle hooks or J-hooks are used to ... Features: Laminated, riveted and welded steel hooks designed to AIST Technical Report

USA Bushman Equipment Inc. Phone: (800) 338-7810 P.O. Box 309 W133 N4960 Campbell Drive (262) 790-4200 Butler, WI 53007-0309 Menomonee Falls, WI 53051 Fax: (262) 790-4202

CANADA Avon Engineering Phone: (800) 844-8117 1680 Brampton Street (905) 689-7994 Hamilton, ON L8H 3S1 Fax: (905) 689-8472

   

MANUFACTURING LIFTING HOOKS

#1 Laminated hook plates are leveled, flame cut, predrilled and then tack welded together.

#4 Hook plates are riveted together. Rivets are placed in an electric heater until red hot.

#3 Plate laminations are riveted together using a special air- powered riveting machine.

#5 Hot rivet is inserted from bottom side.

#2 Hook plate holes

Are countersunk.

#6 Rivet is punched using the riveting machine.

#7 Properly punched rivet