DESCRIPTION

Medium size machine, with two columns structure and movable crosshead with electronic positioning system and mechanical system for clamping. The machine is equipped with an electronic system for acquisition and control (closed loop control).

PRESS FEATURES

- Load cells: ± 1 KN, ± 5 KN, ± 50 KN

- Max crosshead stroke: 1200 mm- Min speed : 0,05 mm/min.- Max speed : 100 mm/min.- Spice between the columns: 440 mm

COMBINED EQUIPMENT

- Resistance furnace up to 1100 °C- RT axial extensometer- HT axial extensometer- RT bending tests equipment- 77 °K tests equipment

TESTS

- RT and HT tensile tests according to ASTM E8/E8M-11; ASTM E21-09; EN ISO 6892-1

- 3 or 4 points bending tests- Fatigue tests

PRESS FEATURES

- Max pressure: 200 bar- Load cell: ± 100 KN- Max piston stroke: ± 100 mm- Max crosshead stroke: 850 mm- Max testing frequency: 10 Hz- Spice between the columns: 500 mm

COMBINED EQUIPMENT

- Induction heating system (6kW) - RT axial extensometers- HT axial extensometer- HT diametral extensometer- Pyrometer (200/1800 °C)

TESTS

- LCF, HCF and Creep-Fatigue testsaccording to ASTM E 2714-09

DESCRIPTION

Medium size machine, with two columns structureand movable crosshead with electronic positioningsystem. The press is equipped by a hydraulic piston, aload cell on the lower side, a hydraulic brake systemfor crosshead positioning and a hydraulic system forclamping. The control system can carry out varioustests like fatigue and creep-fatigue tests.

DESCRIPTION

Medium size machine, with two columns structure and movable crosshead with electronic positioning system. The press is equipped by a hydraulic piston, a load cell on the lower side, a hydraulic brake system for crosshead positioning and a hydraulic system for clamping. The control system can carry out various tests like fatigue tests.

PRESS FEATURES

- Max pressure: 200 bar- Load cell: ± 100 KN- Max piston stroke: ± 100 mm- Max crosshead stroke: 850 mm- Max testing frequency: 10 Hz- Spice between the columns: 500 mm

COMBINED EQUIPMENT

- Resistance furnace up to 1100 °C- RT axial extensometer- HT axial extensometer- Vacuum chambers- Molten metals facilities

TESTS

- Uniaxial standard tests (SSRT)- The machine can carry out tests in hostile enviroments, uni or biaxial, like HT fretting tests, dynamic fiction tests in vacuum at cryogenictemperatures.

DESCRIPTION

Big size machine, with two columns structure and movable crosshead with electronic positioning system. The press is equipped by a hydraulic piston, a load cell on the lower side, a hydraulic brake system for crosshead positioning and a hydraulic system for clamping. The control system can carry out various tests like fatigue tests.

PRESS FACILITIES

- Max pressure: 200 bar- Load cell: ± 500 KN- Max piston stroke: ± 75 mm- Max crosshead stroke: 1200 mm- Max testing frequency: 2 Hz- Spice between the columns: 750 mm

COMBINED EQUIPMENT

- Resistance furnace up to 1100 °C- Vacuum chambers- Cryogenic tests facilities

TESTS

- The machine can carry out tests in hostile enviroments, uni or biaxial, like dynamic fiction tests in vacuum at cryogenic temperature.

DESCRIPTION

Big size machine, with a four columnsstructure. The press is equipped by a hydraulic piston on the upper side. The control system can carry out various tests like fatigue tests.

PRESS FEATURES

- Max pressure: 200 bar- Max compression load: 9 MN- Max piston stroke: ± 50 mm- Max testing frequency: 0,1 Hz- Spice between the columns: 1000 X 1000 mm

COMBINED EQUIPMENT

- Cryogenic tests facilities- Optical meter with control system

for acquiring data

TESTS

- Compression tests- The press can carry out uniaxial tests at cryogenictemperature.

DESCRIPTION- n° 4 30 kN Creep Tests Machines (ratio 1:15)- n° 4 20 kN Creep Tests Machines (ratio 1:10)

TESTS according to ASTM E139-11- Stress Rupture Tests- Creep Rupture Tests- Creep Tests