l3 bsc ip site connectivity upgrade_ver1_2_0

DN09137255 L3 BSC IP Site Connectivity upgrade T3 to T6Copyright 2013 Nokia Solutions and Networks. All rights reserved.CONFIDENTIALAPPROVED 1.2

1 (114)

L3 BSC IP SiteConnectivity upgrade T3to T6Release Delivery: HW UpgradeProduct Family: Radio ControllersProduct: BSC3i 1000/2000, UpgradedFlexi BSCRelease: S16 onwards

Nokia Solutions and Networks is continually striving to reduce the adverse environmental effects of itsproducts and services. We would like to encourage you as our customers and users to join us inworking towards a cleaner, safer environment. Please recycle product packaging and follow therecommendations for power use and proper disposal of our products and their components.

If you should have questions regarding our Environmental Policy or any of the environmental serviceswe offer, please contact us at Nokia Solutions and Networks for additional information.


2 (114)

Table of Contents1 Purpose .................................................................................................................................................. 42 Scope of applications .............................................................................................................................. 53 Using the document ................................................................................................................................ 6

3.1 General info ....................................................................................................................................................... 64 Introduction ............................................................................................................................................. 7

4.1 L2 configuration before upgrade ......................................................................................................................... 84.2 L3 configuration after upgrade ............................................................................................................................ 9

5 Pre-requirements .................................................................................................................................. 115.1 Pre-requirements & Actions needed prior upgrade ............................................................................................ 115.2 Needed documentation .................................................................................................................................... 115.3 Needed equipment .......................................................................................................................................... 11

6 Fallback copying of the current package ................................................................................................ 137 BSC configuration printout (pre-check) .................................................................................................. 148 L3 BSC IP Site Connectivity Upgrade .................................................................................................... 15

8.1 Change the state of SWU ................................................................................................................................. 168.2 Cabling changes(C112043.01) ......................................................................................................................... 16

8.2.1 Locking Pegs ............................................................................................................................. 168.2.2 Cables to be removed: ............................................................................................................... 178.2.3 Cables to be added .................................................................................................................... 18

8.3 BSC configuration ............................................................................................................................................ 198.3.1 Licence ...................................................................................................................................... 198.3.2 Update ESB-26 to L3 supported software.................................................................................... 208.3.3 Enabling or disabling the automatic loading of configuration files ................................................. 218.3.4 SWU configuration change from L2 to L3 .................................................................................... 218.3.5 Change SWU topology from T3 to T6 .......................................................................................... 21

8.4 SWU Configuration form L2 to L3 ..................................................................................................................... 228.4.1 VLAN ......................................................................................................................................... 228.4.2 Spanning Tree and MSTP configuration ...................................................................................... 268.4.3 Interface configuration ................................................................................................................ 308.4.4 OSPF/STATIC routes ................................................................................................................. 318.4.5 VRRP gateways ......................................................................................................................... 33

8.5 Site Switch Configuration ................................................................................................................................. 358.5.1 IP Interface configuration ............................................................................................................ 358.5.2 IP Routing for Site Switches ....................................................................................................... 35

8.6 Change the state of SWU ................................................................................................................................. 388.7 Check for Faulty links ....................................................................................................................................... 388.8 Check for LAN Supervision information............................................................................................................. 38

9 Actions after upgrade & Post conditions ................................................................................................ 399.1 BSC configuration printout (post-check) ............................................................................................................ 399.2 Roll back to T3................................................................................................................................................. 39

10 Appendix 1 ............................................................................................................................................ 4010.1 T6 - BSC3i 1000/2000 (ESB26) ........................................................................................................................ 4010.2 Running configuration (STATIC routing) ........................................................................................................... 40

10.2.1 SWU-0 configuration example .................................................................................................... 4010.2.2 SWU-1 configuration example .................................................................................................... 4510.2.3 SWU-2 configuration example .................................................................................................... 5010.2.4 SWU-3 configuration example .................................................................................................... 5510.2.5 SWU-4 configuration example .................................................................................................... 6010.2.6 SWU-5 configuration example .................................................................................................... 6410.2.7 SWU-8 configuration example .................................................................................................... 6810.2.8 SWU-9 configuration example .................................................................................................... 71

10.3 Running configuration (OSPF routing) .............................................................................................................. 75


3 (114)

10.3.1 SWU-0 configuration example .................................................................................................... 7510.3.2 SWU-1 configuration example .................................................................................................... 8110.3.3 SWU-2 configuration example .................................................................................................... 8610.3.4 SWU-3 configuration example .................................................................................................... 9110.3.5 SWU-4 configuration example .................................................................................................... 9610.3.6 SWU-5 configuration example .................................................................................................. 10010.3.7 SWU-8 configuration example .................................................................................................. 10410.3.8 SWU-9 configuration example .................................................................................................. 109

Contact:

Contact your local Nokia Solutions and Networks support

Summary of changes:

1.0-0 1st approved version1.1-0 Modify infot to be suitable for future releases1.2-0 Modified following values: from max-age 8 to max-age

20 and from max-hops 5 to max-hops 40 (PRNA05450038). Updated document according toGSM/EDGE BSS, Rel. RG30(BSS), OperatingDocumentation, Issue 05: Part-I (the document can befound from NED).


4 (114)

1 PURPOSE

This document describes the implementation of L3 BSC site connectivity for BSC3i 1000/2000 from T3 (L2) to T6(L3) topology with respect to cabling changes, SWU configuration changes, BSC configuration and Site switchconfiguration.


5 (114)

2 SCOPE OF APPLICATIONS

The L3 feature is available for BSC3i 660/1000/2000 and Flexi BSC (3000/4200) in S16 release onwards. Thisdocument is limited only to BSC3i 1000/2000.


6 (114)

3 USING THE DOCUMENT

3.1 General info

The L3 BSC IP Site Connectivity upgrade is done manually without the HIT macro. Procedure must be performedlocally at BSC site.


7 (114)

4 INTRODUCTION

The L3 feature purpose is to make BSC IP integration easier to operator IP backbone and simplify ESBconfiguration.This upgrade requires some cabling changes and the topology for BSC3i1000/2000 is changed from T3 to T6.The L3 BSC IP Site Connectivity upgrade procedure consists of the following tasks:

- Fallback copying of the current software

- BSC configuration printout (pre-check)

- L3 BSC IP Site Connectivity upgrade

- Actions after upgrade and post conditions

o BSS Integration

o BSC configuration printout (post-check)


8 (114)

4.1 L2 configuration before upgrade

L2 connectivity is provided using traditional L2 functions such as MSTP and VLAN. Corelinks uses trunk VLANs,while loops are eliminated by MSTP.MSTP instance roots are in Site Switches, while each SWU calculates the best port to access the root. MSTPincludes 2 instances, which are used to categorise VLANs to both Site Switches. Virtual gateway termination is inSite Switches.

Figure. L2 IP connectivity

The figure presents L2 technology that is used for IP packet forwarding.

SiteSwitch

BSCRedundant SWUs

IP packet

Port

VLANtag

PortCPUPCU

IP packet

IP packetVLANtagIP packet

VLANtag

VLANtag

Figure. IP forwarding logic of L2 IP Connective


9 (114)

The interface between the CPU/PCU and the ESB switch uses L2 Ethernet technology and VLAN-based packetforwarding.The interface between the ESB switch and the Site switch uses also, VLAN-based IP packet forwarding. In theuplink, IP packets are sent over VLAN trunk.

4.2 L3 configuration after upgrade

BSC3i 660 and 3000 have cabling that can be used for L2 and L3, without HW changes. BSC3i 1000/2000requires cabling update, because uplinks are reduced to 4. The connectivity is provided by L3 functions such asIP address and routing. Static routing is the recommended routing and OSPF is alternative option.SWU-0, SWU-1, SWU-2 and SWU-3 have to have L3 capable SW. The L3 capable SW is activated by license.Other PCULAN SWUs have L2 capable SW. Only L3 SWUs have Corelink access to Site Switches.CPULAN and PCULAN internal connectivity is provided by traditional L2 functions such MSTP and VLAN. MSTPincludes 2 instances, which are used to categorize VLANs to CPULAN and PCULAN.CPULAN’s MSTP root is in SWU-0. PCULAN’s MSTP root is in SWU-3, while other PCULAN SWUs calculate thebest port to access the root. Virtual gateway is terminated in L3 SWUs.Following figure presents L3 for BSC interfaces.

Figure. L3 IP Connectivity


10 (114)

The figure presents L2 and L3 technologies that are involved in IP packet forwarding.

SiteSwitch

BSCRedundant SWUs

IP packet

Port

VLANtag

sw3

ROUTEVRIDMASTER

VRIDswx

VLANtag

PortCPUPCU

IP packet

IP packetVLANtagROUTEVLAN

tagIP packet

Figure. IP forwarding logic of L3 IP Connectivity

The interface between the CPU/PCU and the ESB switch uses L2 technology, VLAN-based IPpacket forwarding. The VLAN is connected to L3 technology using VLAN-SW interfaceconnection, while the SW has IP address.

The SW interface has a connection to the virtual router id (VRRP/VRID), which enables IP packetforwarding to the ESB switch whose uplink connection is UP. If uplink is DOWN, the redundantESB switch starts to act as a default gateway (VRRP/VRID MASTER). Then, the routing table isused for finding the next IP address for IP forwarding, which leads to the SW interface that has aVLAN connection to port and finally to the Site Switch.


11 (114)

5 PRE-REQUIREMENTS

5.1 Pre-requirements & Actions needed prior upgrade

The procedure can be implemented for S16 level onwards. It is recommended to install all available changedeliveries prior to the upgrade.IP routing is a NSN SW license-controlled feature (code 1234). Before configuring IP routing to SWU units, SWlicense has to be installed into BSC

5.2 Needed documentation

To perform the upgrade successfully, the following documentation is required:L3 BSC IP Site Connectivity upgrade (this document)

Creating and managing BSC hardware (NED)

Equipment list for BSC3i (NED)

Cabling Instructions for BSC3i (NED)

Plug-in unit software upgrade procedure

Cabling Instructions for i-series Network Elements

Integrated LAN administration document

Pre-Processor Program Information

Fallback copying instructions of DX200 BSC for BSC (NED)

BSC Site Ip Connectivity Guidelines(NED)

BSC Site IP Configuration Examples (NED)

5.3 Needed equipment

To perform the upgrade successfully, the following HW are required:

LAN unit 0 and 1 equipped with switching units (ESB26)

HW platform: DX200


12 (114)

HW platform program: B13 HW platform program based release: S16 onwards Network Element: BSC Cabinet: BSCC and BSCD (BSC3i 2000) Equipping set: BSCC-C04 Cables: C112043.01


13 (114)

6 FALLBACK COPYING OF THE CURRENT PACKAGE

A fallback copying of the running software package must be made before the upgrade.A fallback copying from the old SW can be made by running macro step ‘Fallback copying of the currentpackage’.Manually, the fallback copying can be made following the document: Fallback copying in BSC. The documentcan be found from NED.

Take backup of the configuration file of the SWU by uploading it to the TFTP server.Follow the instructions below:

1. TFTP server is supposed to be running on PC that has IP address 192.168.0.120. Theconfiguration file is copied to TFTP-server root directory on PC.

2. ESB26#copy running-config upload-to 192.168.0.120 config.txtTFTP sending configuration ... 2259

Upload complete

NOTE! If IP-ADDRESS of the switch is missing from the own PC personal firewall you willget next error:Building the configuration ...% Upload failed

Take backup of Site switch running configuration.


14 (114)

7 BSC CONFIGURATION PRINTOUT (PRE-CHECK)

The information about the BSC configurations and conditions are collected.Precondition checking is recommended to do during the daytime before the actual upgrade will be started. Thechecking can be made by using the macro (UPGMAIN.HIT) or manually following the instructions from “BSCconfiguration printout”-document delivered in Release Binder.


15 (114)

8 L3 BSC IP SITE CONNECTIVITY UPGRADE

This chapter includes the instructions how to upgrade from L2 to L3 BSC 1000/2000 site configuration.Note: Following applications will not be available during upgrade. Please plan the traffic accordingly.

1. LDI

2. Sigtran

3. GBoverIP

4. BBI(DFCA)

5. Lb

6. VNP

7. OSI(Q3)

8. Telnet & FTP

Steps:1. Change state of SWUs to SE

2. Cabling changes

a. Locking pegs

b. Cables to be remove

i. Intracabinet cables in BSCC cabinet

ii. Intercabinet cables BSCC / BSCD cabinet

c. Cables to be added

i. Intracabinet cables

ii. Intercabinet cables BSCC / BSCD cabinet

3. BSC Configuration

a. Licence

b. Update ESB-26 to L3 supported software.

c. Enabling or disabling the automatic loading of configuration files

d. SWU configuration change from L2 to L3

e. Change Topology from T3 to T6

4. SWU configuration form L2 to L3

a. VLAN configuration

b. Spanning Tree and MSTP configuration

c. Interface configuration


16 (114)

d. OSPF/Static route

e. VRRP gateways

5. Site switch configuration from L2 to L3

a. Interface configuration

b. OSPF/Static route configuration

6. Change the state of switches to WO

7. Check for Faulty links

8. Check for LAN supervision information

8.1 Change the state of SWU

Change State from Active to PassiveZW6E:SWU,<Unit Index>:P;

Change the state of all SWU to SEZUSC:SWU,<Unit index>:TE;ZUSC:SWU,<Unit index>:SE;For BSC3i 1000(SWU unit index 0 to 5)For BSC3i 2000(SWU unit index 0 to 5 and 7 to 8)

8.2 Cabling changes(C112043.01)

8.2.1 Locking Pegs

Locking pegs of 2 mm connectors are assembled during cabinet integration to the cartridge LASWC-A, accordingto the following figure.The material code of locking pegs is 5418408. They are not included in the R&D BOM.LASWC-A:


17 (114)

8.2.2 Cables to be removed:

8.2.2.1 Intracabinet cables in BSCC cabinetFollowing BSCC cabinet related LDI & Uplink cables are removed(both concern to BSC3i 1000 and 2000):These cables are not included in parts list. They are existing cables which will be removed in upgradingprocedure.

Equipping CABLE FROM CABLE TONo FU Position FU Position Type Use Note

BSCC_421 LANU 0 5.0B 02.1C LANU 0 5.0B 04.1A CHES008 LAN Management

BSCC_423 LANU 1 5.2B 02.1C LANU 1 5.2B 04.1A CHES008 LAN Management

BSCC_819 LANU 0 5.0F04.ETH23

CPRJ45-A T 0.4B 06 CLCS038 LAN Uplink


CPRJ45-A T 0.4B 14 CLCS039 LAN Uplink


CPRJ45-A T 0.4B 02 CNI038 LAN Uplink

PP1

ACEGJLNPRTVXZ

ACEGJLNPRTVXZ

ACEGJLNPRTVXZ

2

1

0105 04 03 02

X

X

X

XXX

XX

X

XXXX

XXX

XX

XXXX

XX

XXX

X


18 (114)



CPRJ45-A T 0.4B 10 CNI039 LAN Uplink

8.2.2.2 Intercabinet cables BSCC / BSCD cabinetFollowing BSCD cabinet related LDI & Uplink cables are removed(concerns only to BSC3i 2000):These HW products are not included in parts list.They are existing HW products which will be removed in upgrading procedure.

Equipping CABLE FROM CABLE TONo FU Position Cabine

tFU Position Type Use Note

BSCD 0_380 LANU 2 3.4B 02.1A BSCC LANU 0 5.0B 02.1E CHES037 LAN

Managem.

BSCD 0_381 LANU 3 3.6B 02.1A BSCC LANU 1 5.2B 02.1E CHES035 LAN

Managem.

BSCD 0_600 LANU 2 3.4F 02.ETH23 BSCC CPRJ45-A

T 0.4B 07 CLCS039 LAN

Uplink


T 0.4B 15 CLCS039 LAN

Uplink


T 0.4B 03 CNI039 LAN

Uplink


T 0.4B 11 CNI039 LAN

Uplink

8.2.3 Cables to be added

8.2.3.1 Intracabinet cablesFollowing BSCC cabinet related redundancy & LDI & Uplink cables are added (concerns to both BSC3i 1000 and2000):These cables are included in parts list.The cables will be delivered to the site and added to cabinet according to upgrading procedure.



LANU 1 5.2F 02.ETH26 CNIX008 LAN Redund.


LANU 0 5.0F 04.ETH26 CNIX006 LAN LDI & Uplink


LANU 1 5.2F 04.ETH26 CNIX006 LAN LDI & Uplink

BSCC_830 LANU 0 5.0F 02.ETH2 CPRJ45-A T 0.4B 02 CNI038 LAN OSI Routerconnection

8.2.3.2 Intercabinet cables BSCC / BSCD cabinetFollowing BSCD cabinet related LDI & Uplink cables are added(concerns only to BSC3i 2000):


19 (114)

These HW products are not included in parts list.They are existing HW products which will be removed in upgrading procedure.

Equipping CABLE FROM CABLE TONo FU Position Cabine

tFU Position Type Use Note

BSCD 0_604 LANU 2 3.4F 02.ETH26 BSCC LANU 0 5.0F 04.ETH25 CNIX040 LAN

LDI &Uplink

BSCD 0_605 LANU 3 3.6F 02.ETH26 BSCC LANU 1 5.2F 02.ETH25 CNIX042 LAN

LDI &Uplink

8.2.3.3 BSC3i 1000/2000 T6 Inter-switch connections

8.3 BSC configuration

8.3.1 Licence

SW licence and L3 functionality for ESB switch licence are needed to be installed before actual upgradecan be started.

ZW7M:FEA=1234:ON;(L3 LICENCE)

After installing L3 licence activate L3 functionality for required ESB switch.


20 (114)

Licence state can be printed with following command:ZW7I:FEA,FULL:FEA=1234;

ZW7I:FEA,FULL:FEA=1234;FlexiBSC LION 12345 2010-09-13 14:50:48FEATURE INFORMATION:---------------------------------------------- FEATURE CODE:..............1234 FEATURE NAME:..............L3 functionality for ESB switch FEATURE STATE:.............ON FEATURE CAPACITY:..........60

If licence state is OFF, change the state to ON with following command:ZW7I:FEA,FULL:FSTATE=ON,FEA=1234;

If licence is not installed, install the new licence file with the command:ZW7L:<licence_file_name>:ON;

More information of licences in the BSC can be found from Technical Bulletin: SW Bulletin licensing.

8.3.2 Update ESB-26 to L3 supported software

Make sure that the ESB-26 cards has L3 supported software(4.6.7 or above)If not update the software via telnet or from BSC.

To update the software via BSC:1. Check for the current version.

ZYFM:ISW:SWU,<Unit index>:;EXECUTION STARTEDUNIT UNIT SOFTWARE SWITCH OMU DISKTYPE INDEX NAME VERSION VERSION----------------------------------------------------SWU 0 ESB26 4.6.0 4.6-7

2. Update software from BSC

ZYFM:USW:SWU,<Unit Index>:;3. Reboot the ESB-26 once software upload is completed.

ZW6T:SWU,<Unit Index>:;LOADING PROGRAM VERSION 5.15-0Telnet connection successfully opened to SWU 0 (ESB26), IP=10.0.0.18.Alma_Swu0>enAlma_Swu0#reload

4. Check for Software version after reload

ZW6T:SWU,0:;Telnet connection successfully opened to SWU 0 (ESB26), IP=10.0.0.18.Alma_Swu0>enAlma_Swu0#sh verN O K I ASwitch model : NOKIA ESB26SW version : 4.6.7 created Apr 14 2010 - 03:38:45Primary version : 4.6.7Secondary version : 4.6.5Java version : Java image not loadedLoader version : 1.1.7 created Oct 28 2004 - 13:38:38System Loader version : 4.6.7 created Apr 14 2010 - 03:34:16Up time : 1 days, 16 hours, 48 min, 7 sec.


21 (114)

8.3.3 Enabling or disabling the automatic loading of configuration files

The parameter that sets whether automatic configuration file loading is allowed forcertain type of LAN switches may have been modified in the old build. This parametersetting is not updated during the network element upgrade. Therefore, you need to change the parametermanually after the software update.

1. Check the properties that are specific to the type of the LAN switch in the old build(YFM).

ZYFM:IST;2. Change the properties in the new build as needed (YFM).

Depending on whether you want to enable or disable the automatic loading of the configurationfiles, select the relevant option below.

• Enable the automatic loading of the configuration file.ZYFM:ENA,<LAN switch type>;

• Disable the automatic loading of the configuration file.ZYFM:DIS,<LAN switch type>;

8.3.4 SWU configuration change from L2 to L3

1. Check whether L3 functionality is activated in each SWUs

ZYFF:INQ:SWU,<index of each SWU>;2. To activate L3 functionality

a. Move SWU to TE if in WO state

ZUSC:SWU,<Unit index>:TE;

b. Activate SWU units with L3 functionalityZYFM:EL3:SWU,<unit index>;

8.3.5 Change SWU topology from T3 to T6

1. Check for current topologyZW6G:/* IDENTIFY TOPOLOGY INDEX: T1 - T16 (CURRENT IS T3, NETWORK ELEMENT BSC3i)

P ... ACTIVATE PREVIOUS TOPOLOGYR ... RELOAD CURRENT TOPOLOGY */

2. Change the topology to T6ZW6G:T6;


22 (114)

8.4 SWU Configuration form L2 to L3

8.4.1 VLAN

Delete all L2 LANS and reconfigure to L3 VLANS with the appropriate ports as in below example. Please alsorefer sample configuration in next chapter for switch vise example.

8.4.1.1 LDI(10)ESB26-0#configure terminal

ESB26-0 (config)#vlan

ESB26-0 (config vlan)#config default

ESB26-0 (config-vlan default)#remove ports 1/1/1,1/1/2,1/1/4-

1/1/19,1/1/22,1/1/23,1/1/25

ESB26-1#configure terminal




1/1/19,1/1/22,1/1/23,1/1/25





1/1/23,1/1/25





1/1/23,1/1/25




ESB26-4 (config-vlan default)#remove ports 1/1/1-1/1/23,1/1/25




ESB26-5 (config-vlan default)#remove ports 1/1/1-1/1/23,1/1/25


23 (114)

8.4.1.2 O&M(10)ESB26-0#configure terminal

ESB26-0(config)#vlan

ESB26-0(config vlan)#create om 10

ESB26-0(config vlan)#config om

ESB26-0(config vlan om)#add ports 1/1/24,1/1/26 tagged

ESB26-0(config vlan om)#add ports 1/1/2,1/1/22 untagged

ESB26-0(config vlan om)#add ports default 1/1/2,1/1/22

ESB26-0(config vlan om)#rif sw10

ESB26-0(config vlan om)#exit



ESB26-1(config vlan)#create om 10

ESB26-1(config vlan)#config om

ESB26-1(config vlan om)#add ports 1/1/24,1/1/26 tagged

ESB26-1(config vlan om)#add ports 1/1/22 untagged

ESB26-1(config vlan om)#add ports default 1/1/22

ESB26-1(config vlan om)#rif sw10

ESB26-1(config vlan om)#exit

8.4.1.3 Sigtran 1(30)ESB26-0#configure terminal


ESB26-0(config vlan)#create sigtran1 30

ESB26-0(config vlan)#config sigtran1

ESB26-0(config vlan sigtran1)#add ports

1/1/20,1/1/21,1/1/24,1/1/26 tagged

ESB26-0(config vlan sigtran1)#add ports 1/1/9-1/1/19 untagged

ESB26-0(config vlan sigtran1)#add ports default 1/1/9-1/1/19

ESB26-0(config vlan sigtran1)#rif sw30

ESB26-0(config vlan sigtran1)#exit






24 (114)

ESB26-1(config vlan sigtran1)#add ports 1/1/24,1/1/26 tagged



8.4.1.4 Sigtran 2(31)ESB26-0#configure terminal




ESB26-0(config vlan sigtran2)#add ports 1/1/24,1/1/26 tagged







ESB26-1(config vlan sigtran2)#add ports

1/1/20,1/1/21,1/1/24,1/1/26 tagged

ESB26-1(config vlan sigtran2)#add ports 1/1/13-1/1/19 untagged

ESB26-1(config vlan sigtran2)#add ports default 1/1/9-1/1/19



8.4.1.5 PCU(31)ESB26-2#configure terminal


ESB26-2(config vlan)#create gb 50

ESB26-2(config vlan)#config gb

ESB26-2(config vlan gb)#add ports 1/1/24,1/1/26 tagged

ESB26-2(config vlan gb)#add ports 1/1/5-1/1/22 untagged

ESB26-2(config vlan gb)#add ports default 1/1/5-1/1/22

ESB26-2(config vlan gb)#rif sw50

ESB26-2(config vlan gb)#exit



ESB26-3(config vlan)#create gb 50

ESB26-3(config vlan)#config gb


25 (114)

ESB26-3(config vlan gb)#add ports 1/1/24,1/1/26 tagged

ESB26-3(config vlan gb)#add ports 1/1/5-1/1/22 untagged

ESB26-3(config vlan gb)#add ports default 1/1/5-1/1/22

ESB26-3(config vlan gb)#rif sw50

ESB26-3(config vlan gb)#exit

8.4.1.6 Core link (3)ESB26-0#configure terminal


ESB26-0(config vlan)#create l3 3

ESB26-0(config vlan)#config l3

ESB26-0(config vlan l3)#add ports 1/1/23,1/1/25 untagged

ESB26-0(config vlan l3)#add ports default 1/1/23,1/1/25

ESB26-0(config vlan l3)#rif sw3

ESB26-0(config vlan l3)#exit























26 (114)




8.4.2 Spanning Tree and MSTP configuration

Change the Spanning tree mode to MST (NSN recommended). Configure computer unit ports and PCU ports asedge ports. Configure Management port and Cross link ports as point-to-point ports. Disable MST on Corelink andOSI link.Switch vise configuration example as follows:

8.4.2.1 Enable MST on Management port, Cross links, Computer ports and PCU ports

ESB26-0# configure terminal

ESB26-0(config)# protocol

ESB26-0(cfg protocol)# mstp enable

ESB26-0(cfg protocol)# mstp 0 priority 24576

ESB26-0(cfg protocol)# mstp max-age 20

ESB26-0(cfg protocol)# mstp max-hops 40

ESB26-0(cfg protocol)# mstp

ESB26-0(cfg protocol mstp)# name l3

ESB26-0(cfg protocol mstp)#instance 0 vlan 1-49,51-4094

ESB26-0(cfg protocol mstp)# instance 1 vlan 50

ESB26-0(cfg protocol mstp)# apply

ESB26-0(cfg protocol)# exit

ESB26-0(config)# interface range 1/1/9-1/1/22

ESB26-0(config-if-group)# mstp edge-port

ESB26-0(config-if-group)# exit

ESB26-0(config)# interface range 1/1/3,1/1/24,1/1/26

ESB26-0(config-if-group)# mstp link-type point-to-point

ESB26-0(config-if-group)# end








27 (114)



ESB26-1(cfg protocol mstp)# instance 0 vlan 1-49,51-4094




















ESB26-2(cfg protocol mstp)# exit













28 (114)





































29 (114)

















8.4.2.2 Disable MST on Core link and OSI linkESB26-0# configure terminal


ESB26-0(config-if-group)# disable mstp

ESB26-0(config-if-group)#end


ESB26-1(config)# interface range 1/1/23,1/1/25




ESB26-2(config)# interface range 1/23,1/1/25




ESB26-3(config)# interface range 1/23,1/1/25




30 (114)

8.4.3 Interface configuration

Configure the following VLAN interfaces for L3:O&M interface: Sw10Sigtran 1 interface: Sw30Sigtran 2 interface: Sw31GBoverIP interface: Sw50

Switch vise example as follows:

ESB26-0#(config)#interface sw10

ESB26-0(config-if sw10)#description for om

ESB26-0(config-if sw10)#ip address 10.16.151.34/28

ESB26-0(config-if sw10)#exit

ESB26-0(config)#interface sw30

ESB26-0(config-if sw30)#description for Sigtran-1








ESB26-1(config-if sw10)#description for om












ESB26-2(config-if sw50)#description for gb





31 (114)

ESB26-3(config-if sw50)#description for gb



8.4.4 OSPF/STATIC routes

Configure OSPF or STATIC routes to the site switches. Switch vise configuration examples as follows:

8.4.4.1 OSPF


ESB26-0(config)router ospf

ESB26-0(config-router)#passive-interface sw10



ESB26-0(config-router)#network 10.16.151.32/28 area 0




ESB26-0(config-router)#ex


ESB26-0(config-if sw10)#ip ospf cost 10



ESB26-0(config-if sw30#ip ospf cost 10

ESB26-0(config-if sw30#exit



ESB26-0(config-if sw31#end








32 (114)









ESB26-1(config-if sw30#ip ospf cost 20

ESB26-1(config-if sw30#exit









ESB26-2(config-router)#exit













8.4.4.2 STATIC


ESB26-0(config)#ip route 0.0.0.0/0 10.16.151.114


33 (114)

ESB26-0(config)#exit










8.4.5 VRRP gateways

Configure VRRP gateways interfaces and IP address for vlan interfaces to communicate. Switch wiseconfiguration examples as follows:

ESB26-0#(config)#router vrrp

ESB26-0(config-router)#permit-incoming-icmp

ESB26-0(config-router)#virtual-router 10 priority 200


ESB26-0(config-router)#virtual-router 31



ESB26-0(config-if sw10)#ip redundant-vip 10 10.16.151.33








ESB26-0(config)#router vrrp

ESB26-0(config-router)#trace-uplink-port 1/1/23 group 10




ESB26-0(config-router)#end


34 (114)





































35 (114)

8.5 Site Switch Configuration

8.5.1 IP Interface configuration

IP Interfaces on site switches to connect the L3 core links form SWUs(0,1,2 and 3)Site-1#configure terminal

Site-1(config)#interface gigabitEthernet 1/0/9

Site-1(config-if)#description to L3bsc13swu0

Site-1(config-if)#no switchport

Site-1(config-if)#ip address 10.16.151.114 255.255.255.252

Site-1(config-if)#no shutdown

Site-1(config-if)#end

Site-1#configure terminal





















8.5.2 IP Routing for Site Switches

IP Routing for Site switches can be either static or OSPF. Sample configuration as below:


36 (114)

8.5.2.1 STATICSite-1#configure terminal

Site-1(config)#ip routing

Site-1(config)#ip route 10.16.151.32 255.255.255.240

10.16.151.113


10.16.151.113


10.16.151.113 120


10.16.151.121 120

Site-1(config)#access-list 1 permit 10.16.151.32 0.0.0.15




Site-1(config)#route-map static-to-ospf permit 10

Site-1(config-route-map)#match ip address 1

Site-1(config-route-map)#set metric 10

Site-1(config-route-map)#set metric-type type-1

Site-1(config-route-map)#exit






Site-1(config)#router ospf 65500

Site-1(config)#redistribute static subnets route-map static-toospf



Site-2(config)#ip routing


10.16.151.117 120


10.16.151.117 120



37 (114)

10.16.151.117


10.16.151.125
















Site-2(config)#redistribute static subnets route-map static-toospf


8.5.2.2 OSPF for site switchesSite-1#configure terminal


Site-1(config-router)#network 10.16.151.114 0.0.0.0 area 0


Site-1#end





Site-2#end


38 (114)

8.6 Change the state of SWU

Change State from Passive to ActiveZW6E:SWU,<Unit Index>:A;

Change the state of all SWU to WOZUSC:SWU,<Unit index>:TE;ZUSC:SWU,<Unit index>:WO;For BSC3i 1000(SWU unit index 0 to 5)For BSC3i 2000(SWU unit index 0 to 5 and 7 to 8)

8.7 Check for Faulty links

ZYFE:IFL;No faulty links reported

READING FAULTY LINKS, MAY TAKE SEVERAL MINUTES ...

SOURCE SOURCE SRC DESTINATION DESTINATION DST FAULTUNIT PLUG-IN UNIT IF UNIT PLUG-IN UNIT IF TYPE-----------------------------------------------------------------------------

8.8 Check for LAN Supervision information

ZYFF:INQ:SWU,<index>;For BSC3i 1000(SWU unit index 0 to 5)For BSC3i 2000(SWU unit index 0 to 5 and 7 to 8)

Supervision data is shown correctly


39 (114)

9 ACTIONS AFTER UPGRADE & POST CONDITIONS

9.1 BSC configuration printout (post-check)

The information about the BSC configurations and conditions are collected.The checking can be made by using the macro (UPGMAIN.HIT) or manually following the instructions from “BSCconfiguration printout”-document delivered in Release Binder.Check for IP applications working as before.

9.2 Roll back to T3

1. Re-do cables for T3

2. Change the SWU from L3 to L2

3. Change the topology from T6 to T3

4. Upload SWU configuration for T3 from TFTP backup

5. Upload Site switch configuration for T3 from TFTP backup

6. Switch BSC software to known good working Fallback taken before T6 upgrade


40 (114)

10 APPENDIX 1

10.1 T6 - BSC3i 1000/2000 (ESB26)

Both copper and fiber uplink connections are cabled to switches SWU-0 – SWU-3. Only one uplink port per switchis, however, active at a given time – the other uplink port is in shutdown.

10.2 Running configuration (STATIC routing)

10.2.1 SWU-0 configuration example

StepsSWU-0#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-0! Log Configuration:!ip address 10.0.0.26 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 inform


41 (114)

snmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-0snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 0 priority 24576!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2name osimstp disable!interface 1/1/3name swu0-swu2


42 (114)

mstp link-type point-to-point!interface 1/1/4!interface 1/1/5!interface 1/1/6!interface 1/1/7!interface 1/1/8!interface 1/1/9name BCSU-10-EL0mstp edge-portdefault vlan 30!interface 1/1/10name BCSU-9-EL0mstp edge-portdefault vlan 30!interface 1/1/11name BCSU-8-EL0mstp edge-portdefault vlan 30!interface 1/1/12name BCSU-7-EL0mstp edge-portdefault vlan 30!interface 1/1/13name BCSU-6-EL0mstp edge-portdefault vlan 30!interface 1/1/14name BCSU-5-EL0mstp edge-portdefault vlan 30!interface 1/1/15name BCSU-4-EL0mstp edge-portdefault vlan 30!interface 1/1/16name BCSU-3-EL0mstp edge-portdefault vlan 30!interface 1/1/17name BCSU-2-EL0


43 (114)

mstp edge-portdefault vlan 30!interface 1/1/18name BCSU-1-EL0mstp edge-portdefault vlan 30!interface 1/1/19name BCSU-0-EL0mstp edge-portdefault vlan 30!interface 1/1/20name MCMU-1-EL0mstp edge-portdefault vlan 1!interface 1/1/21name MCMU-0-EL0mstp edge-portdefault vlan 1!interface 1/1/22name OMU-EL0mstp edge-portdefault vlan 10!interface 1/1/23name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu0-swu1mstp link-type point-to-point!interface 1/1/25name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu0-swu1mstp link-type point-to-point!interface sw0interface sw3description Site1


44 (114)

ip address 10.16.151.113/30!interface sw10description o&mip address 10.16.151.34/28!interface sw30description sigtran-1ip address 10.16.151.82/28!interface sw31description sigtran-2ip address 10.16.151.98/28!!ip route 0.0.0.0/0 10.16.151.114!!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 10 priority 200virtual-router 30 priority 200virtual-router 31interface sw10ip redundant-vip 10 10.16.151.33interface sw30ip redundant-vip 30 10.16.151.81interface sw31ip redundant-vip 31 10.16.151.97router vrrptrace-uplink-port 1/1/23 group 10trace-uplink-port 1/1/23 group 30trace-uplink-port 1/1/25 group 10trace-uplink-port 1/1/25 group 30!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/20-1/1/21 untaggedadd ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate o&m 10config o&m


45 (114)

add ports 1/1/24,1/1/26 taggedadd ports 1/1/2,1/1/22 untaggedadd ports default 1/1/2,1/1/22rif sw10!vlancreate sigtran-1 30config sigtran-1add ports 1/1/20,1/1/21,1/1/24,1/1/26 taggedadd ports 1/1/9-1/1/19 untaggedadd ports default 1/1/9-1/1/19rif sw30!vlancreate sigtran-2 31config sigtran-2add ports 1/1/24,1/1/26 taggedrif sw31!


StepsSWU-1#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-1! Log Configuration:!ip address 10.0.0.34 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1


46 (114)

snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-1snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 0 priority 28672!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2name osimstp disable!interface 1/1/3name swu1-swu3mstp link-type point-to-point!


47 (114)

interface 1/1/4!interface 1/1/5!interface 1/1/6!interface 1/1/7!interface 1/1/8!interface 1/1/9name BCSU-10-EL1mstp edge-portdefault vlan 30!interface 1/1/10name BCSU-9-EL1mstp edge-portdefault vlan 30!interface 1/1/11name BCSU-8-EL1mstp edge-portdefault vlan 30!interface 1/1/12name BCSU-7-EL1mstp edge-portdefault vlan 30!interface 1/1/13name BCSU-6-EL1mstp edge-portdefault vlan 30!interface 1/1/14name BCSU-5-EL1mstp edge-portdefault vlan 30!interface 1/1/15name BCSU-4-EL1mstp edge-portdefault vlan 30!interface 1/1/16name BCSU-3-EL1mstp edge-portdefault vlan 30!interface 1/1/17name BCSU-2-EL1mstp edge-portdefault vlan 30


48 (114)

!interface 1/1/18name BCSU-1-EL1mstp edge-portdefault vlan 30!interface 1/1/19name BCSU-0-EL1mstp edge-portdefault vlan 30!interface 1/1/20name MCMU-1-EL1mstp edge-portdefault vlan 1!interface 1/1/21name MCMU-0-EL1mstp edge-portdefault vlan 1!interface 1/1/22name OMU-EL1mstp edge-portdefault vlan 10!interface 1/1/23name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu1-swu0mstp link-type point-to-point!interface 1/1/25name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu1-swu0mstp link-type point-to-point!interface sw0interface sw3description Site2ip address 10.16.151.117/30!


49 (114)

interface sw10description o&mip address 10.16.151.35/28!interface sw30description sigtran-1ip address 10.16.151.83/28!interface sw31description sigtran-2ip address 10.16.151.99/28!!ip route 0.0.0.0/0 10.16.151.118!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 10virtual-router 30virtual-router 31 priority 200interface sw10ip redundant-vip 10 10.16.151.33interface sw30ip redundant-vip 30 10.16.151.81interface sw31ip redundant-vip 31 10.16.151.97router vrrptrace-uplink-port 1/1/23 group 31trace-uplink-port 1/1/25 group 31!! VLAN configuration:!vlanconfig default


50 (114)

remove ports 1/1/1-1/1/26add ports 1/1/20-1/1/21 untaggedadd ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate o&m 10config o&madd ports 1/1/24,1/1/26 taggedadd ports 1/1/22 untaggedadd ports default 1/1/22rif sw10!vlancreate sigtran-1 30config sigtran-1add ports 1/1/24,1/1/26 taggedrif sw30!vlancreate sigtran-2 31config sigtran-2add ports 1/1/20,1/121,1/1/24,1/1/26 taggedadd ports 1/1/9-1/1/19 untaggedadd ports default 1/1/9-1/1/19rif sw31!


StepsSWU-2#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-2! Log Configuration:!ip address 10.0.0.27 255.255.255.248ip address dhcpmac-address-table aging-time 10


51 (114)

!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-2snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 1 priority 28672!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!


52 (114)

!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2name osimstp disable!interface 1/1/3name swu2-swu0mstp link-type point-to-point!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50


53 (114)

!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gb


54 (114)

mstp edge-portdefault vlan 50!interface 1/1/23name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu2-swu3mstp link-type point-to-point!interface 1/1/25name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu2-swu4mstp link-type point-to-point!interface sw0interface sw3description Site1ip address 10.16.151.121/30!interface sw50description gbip address 10.16.151.130/25!ip route 0.0.0.0/0 10.16.151.122!interface sw0!interface sw3!interface sw50!!!!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 50interface sw50ip redundant-vip 50 10.16.151.129router vrrp!!!! VLAN configuration:


55 (114)

!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-3#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-3! Log Configuration:!ip address 10.0.0.34 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2c


56 (114)

snmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-3snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 1 priority 24576!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!


57 (114)

interface 1/1/3name swu3-swu1mstp link-type point-to-point!interface 1/1/4!interface 1/1/5!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!


58 (114)

interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu3-swu2mstp link-type point-to-point!interface 1/1/25


59 (114)

name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu3-swu5mstp link-type point-to-point!interface sw0interface sw3description Site2ip address 10.16.151.125/30!interface sw50description gbip address 10.16.151.131/25!ip route 0.0.0.0/0 10.16.151.126!interface sw0!interface sw3!interface sw50!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 50 priority 200interface sw50ip redundant-vip 50 10.16.151.129router vrrptrace-uplink-port 1/1/23 group 50trace-uplink-port 1/1/25 group 50!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlan


60 (114)

create gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-4#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-4! Log Configuration:!ip address 10.0.0.34 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1


61 (114)

snmp-server system-name SWU-4snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7


62 (114)

name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50


63 (114)

!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu4-swu5mstp link-type point-to-point!interface 1/1/25name swu4-swu8mstp link-type point-to-point!interface 1/1/26name swu4-swu2mstp link-type point-to-point!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24-1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24-1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22


64 (114)

rif sw50!


StepsSWU-5#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-5! Log Configuration:!ip address 10.0.0.36 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-5snmp-server contact NSN!! WEB-server configuration:!


65 (114)

! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8


66 (114)

name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50


67 (114)

!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu5-swu4mstp link-type point-to-point!interface 1/1/25name swu5-swu9mstp link-type point-to-point!interface 1/1/26name swu5-swu3mstp link-type point-to-point!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24-1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24-1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


68 (114)


StepsSWU-8#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-8! Log Configuration:!ip address 10.0.0.29 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-8snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:


69 (114)

!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4name gbmstp edge-portdefault vlan 50!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!


70 (114)

interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-port


71 (114)

default vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu8-swu9mstp link-type point-to-point!interface 1/1/25!interface 1/1/26name swu8-swu4mstp link-type point-to-point!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24,1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/4-1/1/22 untaggedadd ports default 1/1/4-1/1/22rif sw50!


StepsSWU-9#SH RUN


72 (114)

Building the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-9! Log Configuration:!ip address 10.0.0.37 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-9snmp-server contact NSN!! WEB-server configuration:!!! DNS Resolver configuration:!!!!! DOT1X configuration:!!! Lldp configuration:!!!! Protocol configuration:!protocol!! MSTP configuration:


73 (114)

!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!!! ACL Configuration:!! QOS Configuration:!!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4name gbmstp edge-portdefault vlan 50!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50


74 (114)

!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gb


75 (114)

mstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu9-swu8mstp link-type point-to-point!interface 1/1/25!interface 1/1/26name swu9-swu5mstp link-type point-to-point!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24,1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/4-1/1/22 untaggedadd ports default 1/1/4-1/1/22rif sw50!

10.3 Running configuration (OSPF routing)


StepsSWU-0#SH RUNBuilding the configuration ...


76 (114)

! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-0! Log Configuration:!ip address 10.0.0.26 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-0snmp-server contact NSN!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 0 priority 24576!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50


77 (114)

apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2name osimstp disable!interface 1/1/3name swu0-swu2mstp link-type point-to-point!interface 1/1/4!interface 1/1/5!interface 1/1/6!interface 1/1/7!interface 1/1/8!interface 1/1/9name BCSU-10-EL0mstp edge-portdefault vlan 30!interface 1/1/10name BCSU-9-EL0mstp edge-portdefault vlan 30!interface 1/1/11name BCSU-8-EL0mstp edge-portdefault vlan 30!interface 1/1/12name BCSU-7-EL0mstp edge-portdefault vlan 30!interface 1/1/13name BCSU-6-EL0mstp edge-portdefault vlan 30!


78 (114)

interface 1/1/14name BCSU-5-EL0mstp edge-portdefault vlan 30!interface 1/1/15name BCSU-4-EL0mstp edge-portdefault vlan 30!interface 1/1/16name BCSU-3-EL0mstp edge-portdefault vlan 30!interface 1/1/17name BCSU-2-EL0mstp edge-portdefault vlan 30!interface 1/1/18name BCSU-1-EL0mstp edge-portdefault vlan 30!interface 1/1/19name BCSU-0-EL0mstp edge-portdefault vlan 30!interface 1/1/20name MCMU-1-EL0mstp edge-portdefault vlan 1!interface 1/1/21name MCMU-0-EL0mstp edge-portdefault vlan 1!interface 1/1/22name OMU-EL0mstp edge-portdefault vlan 10!interface 1/1/23name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24


79 (114)

name swu0-swu1mstp link-type point-to-point!interface 1/1/25name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu0-swu1mstp link-type point-to-point!interface sw0interface sw3description Site1ip address 10.16.151.113/30!interface sw10description o&mip address 10.16.151.34/28!interface sw30description sigtran-1ip address 10.16.151.82/28!interface sw31description sigtran-2ip address 10.16.151.98/28!ip route 0.0.0.0/0 10.16.151.114!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! OSPF Configuration:!! Lldp configuration:


80 (114)

!interface sw0!interface sw3!interface sw10ip ospf cost 10!interface sw30ip ospf cost 10!interface sw31ip ospf cost 20!router ospfpassive-interface sw10passive-interface sw30passive-interface sw31network 10.16.151.32/28 area 0network 10.16.151.80/28 area 0network 10.16.151.96/28 area 0network 10.16.151.112/30 area 0!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 10 priority 200virtual-router 30 priority 200virtual-router 31interface sw10ip redundant-vip 10 10.16.151.33interface sw30ip redundant-vip 30 10.16.151.81interface sw31ip redundant-vip 31 10.16.151.97router vrrptrace-uplink-port 1/1/23 group 10trace-uplink-port 1/1/23 group 30trace-uplink-port 1/1/25 group 10trace-uplink-port 1/1/25 group 30!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/20-1/1/21 untaggedadd ports 1/1/3, 1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untagged


81 (114)

add ports default 1/1/23,1/1/25rif sw3!vlancreate o&m 10config o&madd ports 1/1/24,1/1/26 taggedadd ports 1/1/2,1/1/22 untaggedadd ports default 1/1/2,1/1/22rif sw10!vlancreate sigtran-1 30config sigtran-1add ports 1/1/20,1/1/21,1/1/24,1/1/26 taggedadd ports 1/1/9-1/1/19 untaggedadd ports default 1/1/9-1/1/19rif sw30!vlancreate sigtran-2 31config sigtran-2add ports 1/1/24,1/1/26 taggedrif sw31


StepsSWU-1#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-1! Log Configuration:!ip address 10.0.0.34 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2c


82 (114)

snmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-1snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 0 priority 28672!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3


83 (114)

name swu1-swu3mstp link-type point-to-point!interface 1/1/4!interface 1/1/5!interface 1/1/6!interface 1/1/7!interface 1/1/8!interface 1/1/9name BCSU-10-EL1mstp edge-portdefault vlan 30!interface 1/1/10name BCSU-9-EL1mstp edge-portdefault vlan 30!interface 1/1/11name BCSU-8-EL1mstp edge-portdefault vlan 30!interface 1/1/12name BCSU-7-EL1mstp edge-portdefault vlan 30!interface 1/1/13name BCSU-6-EL1mstp edge-portdefault vlan 30!interface 1/1/14name BCSU-5-EL1mstp edge-portdefault vlan 30!interface 1/1/15name BCSU-4-EL1mstp edge-portdefault vlan 30!interface 1/1/16name BCSU-3-EL1mstp edge-portdefault vlan 30!interface 1/1/17


84 (114)

name BCSU-2-EL1mstp edge-portdefault vlan 30!interface 1/1/18name BCSU-1-EL1mstp edge-portdefault vlan 30!interface 1/1/19name BCSU-0-EL1mstp edge-portdefault vlan 30!interface 1/1/20name MCMU-1-EL1mstp edge-portdefault vlan 1!interface 1/1/21name MCMU-0-EL1mstp edge-portdefault vlan 1!interface 1/1/22name OMU-EL1mstp edge-portdefault vlan 10!interface 1/1/23name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu1-swu0mstp link-type point-to-point!interface 1/1/25name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu1-swu0mstp link-type point-to-point!interface sw0interface sw3


85 (114)

description Site2ip address 10.16.151.117/30!interface sw10description o&mip address 10.16.151.35/28!interface sw30description sigtran-1ip address 10.16.151.83/28!interface sw31description sigtran-2ip address 10.16.151.99/28!ip route 0.0.0.0/0 10.16.151.118!interface sw0!interface sw3!interface sw10ip ospf cost 20!interface sw30ip ospf cost 20!interface sw31ip ospf cost 10!router ospfpassive-interface sw10passive-interface sw30passive-interface sw31network 10.16.151.32/28 area 0network 10.16.151.80/28 area 0network 10.16.151.96/28 area 0network 10.16.151.116/30 area 0!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 10virtual-router 30virtual-router 31 priority 200interface sw10ip redundant-vip 10 10.16.151.33interface sw30ip redundant-vip 30 10.16.151.81interface sw31ip redundant-vip 31 10.16.151.97router vrrptrace-uplink-port 1/1/23 group 31


86 (114)

trace-uplink-port 1/1/25 group 31!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/20-1/1/21 untaggedadd ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate o&m 10config o&madd ports 1/1/24,1/1/26 taggedadd ports 1/1/22 untaggedadd ports default 1/1/22rif sw10!vlancreate sigtran-1 30config sigtran-1add ports 1/1/24,1/1/26 taggedrif sw30!vlancreate sigtran-2 31config sigtran-2add ports 1/1/20,1/1/21,1/1/24,1/1/26 taggedadd ports 1/1/9-1/1/19 untaggedadd ports default 1/1/9-1/1/19rif sw31


StepsSWU-2#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-2! Log Configuration:!


87 (114)

ip address 10.0.0.27 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-2snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 1 priority 28672!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50


88 (114)

apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3name swu2-swu0mstp link-type point-to-point!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!


89 (114)

interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50


90 (114)

!interface 1/1/23name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu2-swu3mstp link-type point-to-point!interface 1/1/25name Site1mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu2-swu4mstp link-type point-to-point!interface sw0interface sw3description Site1ip address 10.16.151.121/30!interface sw50description gbip address 10.16.151.130/25!ip route 0.0.0.0/0 10.16.151.122!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!interface sw0


91 (114)

!interface sw3!interface sw50ip ospf cost 20!router ospfpassive-interface sw50network 10.16.151.120/30 area 0network 10.16.151.128/25 area 0!! VRRP Configuration:!router vrrppermit-incoming-icmpvirtual-router 50interface sw50ip redundant-vip 50 10.16.151.129router vrrp!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-3#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!


92 (114)

! Router Manager Configuration:hostname SWU-3! Log Configuration:!ip address 10.0.0.35 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-3snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40mstp 1 priority 24576!


93 (114)

mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3name swu3-swu1mstp link-type point-to-point!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11


94 (114)

name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!


95 (114)

interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3shutdown!interface 1/1/24name swu3-swu2mstp link-type point-to-point!interface 1/1/25name Site2mstp edge-portmstp bpdu-rx discardmstp disabledefault vlan 3!interface 1/1/26name swu3-swu5mstp link-type point-to-point!interface sw0interface sw3description Site1ip address 10.16.151.125/30!interface sw50description gbip address 10.16.151.131/25!ip route 0.0.0.0/0 10.16.151.126!interface sw0!interface sw3!interface sw50ip ospf cost 10!router ospfpassive-interface sw50network 10.16.151.124/30 area 0network 10.16.151.128/25 area 0!! VRRP Configuration:!router vrrp


96 (114)

permit-incoming-icmpvirtual-router 50 priority 200interface sw50ip redundant-vip 50 10.16.151.129router vrrptrace-uplink-port 1/1/23 group 50trace-uplink-port 1/1/25 group 50!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/3,1/1/24,1/1/26 tagged!vlancreate l3 3config l3add ports 1/1/23,1/1/25 untaggedadd ports default 1/1/23,1/1/25rif sw3!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-4#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-4! Log Configuration:!ip address 10.0.0.28 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 included


97 (114)

snmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-4snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!


98 (114)

interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14


99 (114)

name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu4-swu5mstp link-type point-to-point!interface 1/1/25name swu4-swu8mstp link-type point-to-point!


100 (114)

interface 1/1/26name swu4-swu2mstp link-type point-to-point!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24-1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24-1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-5#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-5! Log Configuration:!ip address 10.0.0.36 255.255.255.248


101 (114)

ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-5snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!


102 (114)

!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50


103 (114)

!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24


104 (114)

name swu5-swu4mstp link-type point-to-point!interface 1/1/25name swu5-swu9mstp link-type point-to-point!interface 1/1/26name swu5-swu3mstp link-type point-to-point!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24-1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24-1/1/26 taggedadd ports 1/1/5-1/1/22 untaggedadd ports default 1/1/5-1/1/22rif sw50!


StepsSWU-8#SH RUNBuilding the configuration ...! Current Configuration:!


105 (114)

! Version 4.6.0!! Router Manager Configuration:hostname SWU-8! Log Configuration:!ip address 10.0.0.29 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-8snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40


106 (114)

!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4name gbmstp edge-portdefault vlan 50!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gbmstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50


107 (114)

!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-port


108 (114)

default vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu8-swu9mstp link-type point-to-point!interface 1/1/25!interface 1/1/26name swu8-swu4mstp link-type point-to-point!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24,1/1/26 tagged!vlancreate gb 50config gbadd ports 1/1/24,1/1/26 taggedadd ports 1/1/4-1/1/22 untaggedadd ports default 1/1/4-1/1/22rif sw50!


109 (114)


StepsSWU-9#SH RUNBuilding the configuration ...! Current Configuration:!! Version 4.6.0!! Router Manager Configuration:hostname SWU-9! Log Configuration:!ip address 10.0.0.37 255.255.255.248ip address dhcpmac-address-table aging-time 10!! Snmp-server configuration:!snmp-server enablesnmp-server view viewAll 1.3 includedsnmp-server group Grp_public v1 read viewAll write viewAllnotify viewAllsnmp-server group Grp_public v2c read viewAll write viewAllnotify viewAllsnmp-server user public group Grp_public v1snmp-server user public group Grp_public v2csnmp-server target-param Nm_public public v2csnmp-server notify authenticationFailure tag1snmp-server notify coldStart tag1 informsnmp-server notify linkDown tag1snmp-server notify linkUp tag1snmp-server notify warmStart tag1 informsnmp-server notify topologyChange tag1snmp-server notify mstpTopologyChange tag1snmp-server notify cpuTemperatureExceeded tag1snmp-server notify imageCrcCheckFailed tag1snmp-server notify configurationLoadFailed tag1snmp-server notify cpuUtilizationExceeded tag1snmp-server notify ramFreeSpaceExceeded tag1snmp-server notify portsCRCErrExceeded tag1snmp-server system-name SWU-9snmp-server contact NSN!! WEB-server configuration:!! DNS Resolver configuration:!! DOT1X configuration:!! Lldp configuration:!! Protocol configuration:!


110 (114)

protocol!! MSTP configuration:!mstp enablemstp max-age 20mstp max-hops 40!mstpname L3instance 0 vlan 1-49,51-4094instance 1 vlan 50apply!!! ACL Configuration:!! QOS Configuration:!! Port configuration:!interface 1/1/1!interface 1/1/2!interface 1/1/3!interface 1/1/4name gbmstp edge-portdefault vlan 50!interface 1/1/5name gbmstp edge-portdefault vlan 50!interface 1/1/6name gbmstp edge-portdefault vlan 50!interface 1/1/7name gbmstp edge-portdefault vlan 50!interface 1/1/8name gbmstp edge-portdefault vlan 50!interface 1/1/9name gb


111 (114)

mstp edge-portdefault vlan 50!interface 1/1/10name gbmstp edge-portdefault vlan 50!interface 1/1/11name gbmstp edge-portdefault vlan 50!interface 1/1/12name gbmstp edge-portdefault vlan 50!interface 1/1/13name gbmstp edge-portdefault vlan 50!interface 1/1/14name gbmstp edge-portdefault vlan 50!interface 1/1/15name gbmstp edge-portdefault vlan 50!interface 1/1/16name gbmstp edge-portdefault vlan 50!interface 1/1/17name gbmstp edge-portdefault vlan 50!interface 1/1/18name gbmstp edge-portdefault vlan 50!interface 1/1/19name gbmstp edge-portdefault vlan 50!interface 1/1/20


112 (114)

name gbmstp edge-portdefault vlan 50!interface 1/1/21name gbmstp edge-portdefault vlan 50!interface 1/1/22name gbmstp edge-portdefault vlan 50!interface 1/1/23!interface 1/1/24name swu9-swu8mstp link-type point-to-point!interface 1/1/25!interface 1/1/26name swu9-swu5mstp link-type point-to-point!! Switch Monitoring configuration:!! LAG Configuration:!interface ag01!interface ag02!interface ag03!interface ag04!interface ag05!interface ag06!interface ag07!! VLAN configuration:!vlanconfig defaultremove ports 1/1/1-1/1/26add ports 1/1/24,1/1/26 tagged!vlancreate gb 50config gb


113 (114)

add ports 1/1/24,1/1/26 taggedadd ports 1/1/4-1/1/22 untaggedadd ports default 1/1/4-1/1/22rif sw50!


114 (114)

Disclaimer

The information in this document is subject to change without notice and describes only theproduct defined in the introduction of this documentation. This documentation is intended for theuse of Nokia Solutions and Networks customers only for the purposes of the agreement underwhich the document is submitted, and no part of it may be used, reproduced, modified ortransmitted in any form or means without the prior written permission of Nokia Solutions andNetworks. The documentation has been prepared to be used by professional and properlytrained personnel, and the customer assumes full responsibility when using it. Nokia Solutionsand Networks welcomes customer comments as part of the process of continuous developmentand improvement of the documentation.

The information or statements given in this documentation concerning the suitability, capacity,or performance of the mentioned hardware or software products are given “as is” and all liabilityarising in connection with such hardware or software products shall be defined conclusively andfinally in a separate agreement between Nokia Solutions and Networks and the customer.However, Nokia Solutions and Networks has made all reasonable efforts to ensure that theinstructions contained in the document are adequate and free of material errors and omissions.Nokia Solutions and Networks will, if deemed necessary by Nokia Solutions and Networks,explain issues which may not be covered by the document.

Nokia Solutions and Networks will correct errors in this documentation as soon as possible. INNO EVENT WILL NOKIA SOLUTIONS AND NETWORKS BE LIABLE FOR ERRORS IN THISDOCUMENTATION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL,DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUTNOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESSOPPORTUNITY OR DATA,THAT MAY ARISE FROM THE USE OF THIS DOCUMENT ORTHE INFORMATION IN IT.

This documentation and the product it describes are considered protected by copyrights andother intellectual property rights according to the applicable laws.

NSN is a trademark of Nokia Solutions and Networks. Nokia is a registered trademark of NokiaCorporation. Other product names mentioned in this document may be trademarks of theirrespective owners, and they are mentioned for identification purposes only.

Copyright © 2013 Nokia Solutions and Networks. All rights reserved.

l3 bsc ip site connectivity upgrade_ver1_2_0

Documents

prior upgrade

l3 configuration

bsc configuration printout

s16 onwardsnokia solutions

environmental policy

l2 configuration

needed documentation

needed equipment