l2tp (nat enabled with global pool) · l2tp (nat enabled with global pool) scenario 3 open your web...
TRANSCRIPT
![Page 1: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/1.jpg)
![Page 2: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/2.jpg)
![Page 3: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/3.jpg)
L2TP (NAT Enabled with Global Pool) Scenario 3
Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN IP is 192.168.1.1)
You are now at the login page of the P-2812HNU-F1
Default Username = admin
Default Password = 1234
Click on the Login button
At this Change Password-page you can click on Skip or you can change the Password of the
admin account (your choice)
![Page 4: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/4.jpg)
You are now logged into the GUI of the P-2812HNU-F1; No PPPoE connection has been
setup, hence the reason the Internet line in the diagram is red
Mouse over the Network Setting tab
![Page 5: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/5.jpg)
Click on Broadband
Click on Edit AdslWAN interface (click on the paper icon on the right hand side under the
Modify heading)
![Page 6: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/6.jpg)
On the WAN Interface Edit page, scroll down to the PPP Information section
On the PPP Information section, enter your PPPoE Username and PPPoE Password (PPPoE
account details provided by your ISP)
![Page 7: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/7.jpg)
Scroll down and click on Apply once the PPPoE details has been entered
P-2812HNU-F1 applying the PPPoE details that was entered
![Page 8: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/8.jpg)
PPPoE details has been applied to the P-2812HNU-F1
Click on the Connection Status tab
![Page 9: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/9.jpg)
PPPoE details has been correctly entered, the diagram show that an internet connection is
up (the internet line changed from red to green)
Mouse over the Security tab
![Page 10: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/10.jpg)
Click on L2TP VPN
L2TP VPN setup page
![Page 11: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/11.jpg)
Always use Dial out with Connection Type set to LAN-LAN
NAT must be Enabled
Address Mapping must be Enabled
Address Mapping Set must be set to 1
Once all the L2TP details have been entered (L2TP details provided by your ISP), click on
Apply
![Page 12: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/12.jpg)
Mouse over the Network Setting tab
Click on Static Route
![Page 13: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/13.jpg)
Click on Add New Static Route
Add New Static Route page
![Page 14: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/14.jpg)
Active should be checked to enable this route
Give the route a descriptive name
Enter Destination IP Address, IP Subnet Mask and Gateway IP Address (if applicable) provided by your ISP
Bound the LNS IP address over the AdslWAN1 interface (your ISP will provide you with the required information)
Click on Apply
Static Route rule has been created
![Page 15: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/15.jpg)
Mouse over the Network Setting tab
Click on NAT
![Page 16: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/16.jpg)
On the NAT page, click on the Address Mapping tab
On the Address Mapping tab, click on the Add button
![Page 17: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/17.jpg)
Add Address Mapping rule page
At the Service Name, click on the drop down list and select Many-to-One (Many-to-One
allows for more than one private IP address internet breakout via the L2TP Tunnel interface)
![Page 18: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/18.jpg)
At the WAN Interface, select the newly created L2TP Tunnel
Setup an Address Mapping rule (NAT rule that NAT’s the private IP to a global pool IP), as the
L2TP client side IP is not routable. This rule will allow breakout to the internet via the L2TP tunnel (L2TP is setup as default route).
Local Start IP and Local End IP – specify the DHCP pool.
Global Start IP (use the 1st available global pool IP). Your ISP will provide you with the global pool IP.
Click on Apply
![Page 19: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/19.jpg)
Address Mapping rule has been created
Mouse over the Security tab
![Page 20: L2TP (NAT Enabled with Global Pool) · L2TP (NAT Enabled with Global Pool) Scenario 3 Open your web browser and type in the address bar the LAN IP of the P-2812HNU-F1 (default LAN](https://reader033.vdocuments.us/reader033/viewer/2022053022/604ee32d5461775e5f793fda/html5/thumbnails/20.jpg)
Click on L2TP VPN
Click on the Monitor tab; this will indicate the status of the L2TP tunnel.