kw plastics · kw plastics recycling division 279 pike county lake road troy, al 36079 800-633-8744...
TRANSCRIPT
KW Plastics …………..
Market Demand & Update Stephanie Baker, Director of Market Development
kwplastics.com
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
KW Plastics of Troy KW Plastics of California KW Recycling Division KW Container : -Troy, AL -Bakersfield, CA -Chicago Heights, IL -Allentown, PA -Dallas, TX Wiley Sanders Truck Lines Sanders Lead Company
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Height: 92 feet tall Capacity: 30 Million Lbs.
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
!"#$%&"'#()*+,&"--*.$/"'
01$*+/1-,2*."3*+4,51./-/$4
216,01$*+/1-,7'#8*.$/"'
9:,!-1#$/.#
:1#;-/'*
<=$+(#/"',>,&")8"('?/'@
&*+$/A/*?,B1C,D'1-4#/#
E;/88/'@
9:2,&(#$")*+
The reprocessing of KWR post-consumerresin begins with the gathering of recyclables
and sortation at a material recovery facility(MRF).
Throughout the recycling process, aseries of quality checks and measurementsprovide control and assurance of a quality
expectations of both KWR and the customer.
As the world’s largest reprocessor of HDPEand PP resins, KW Plastics innovation and
investment in equipment, capacity,
validates KWR as the international leaderin PCR supply.
KWR PCR applications include automotive,beauty & personal care packaging, pipe,paint & coatings containers, agriculture,
packaging and sheet.
KW Plastics is an ISO:9001-2000 registeredfacility with ISO-IEC 17025:2005 accredited lab.
coveted Ford Q1 supplier award in 1994.
For more information on KW Plastics andour history in providing closed loop recycling
as a sustainable solution for over 25 years,www.kwplastics.com
!"#"$%&'$()($$$$*+&,-$./01020$34)56$$$$5))743375(88$$$$999":9;/0<=>?<"?&2
@A$!/0<=>?<$POST-CONSUMER RECYCLING PROCESS
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Post-Consumer Raw Material
HDPE Mixed Color Bale -KWR 102-
HDPE Natural Bale -KWR 101-
Rigid PP Bale Flexible PP Bale
HDPE Injection Grade Bale -KWR 105-
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Applications KW PCR applications include: • Automotive • Beauty & Personal Care
Packaging • Pipe • Recreation • Construction • Agriculture • Paint & Coatings Containers • Flexible Packaging • Sheet
195 full time jobs $6.6 million annual payroll $4,439,696.89 annual utility bills $150,545.17 taxes paid (city, county, state, fed.)
------------------
RECYCLING ADD$ UP!
KW Plastics Recycling Division-Troy, AL���-Economic Impact-
S. Baker | KW Plas/cs Recycling Division KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Economic Impact
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Incinerating 10,000 tons of waste creates 1 job; Landfilling 10,000 tons of waste creates 6 jobs; Recycling 10,000 tons of waste creates 36 jobs.
The post-consumer plastics recycling industry provides jobs for more than 52,000 American workers.
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
-60 manufacturers in SE with demand - 5,946 employees - annual sales of $2.9 billion Plastic reclaimers in SE average operating capacity of 83%
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
27% of HDPE purchased from SE region <1% of HDPE purchased from Alabama “If KW Plastics relied on plastic feedstock from state of Alabama���
alone, we could run our facility in Troy, Alabama���a less than 2 days each year.”
Where do we get our material?
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
If we can’t meet the demand, we diversify…
KW Plastics Recycling Division
Purchasing Specification Sheet
!"#$%&'($)*+,-.$/0'($12$$34*.5$6
/$789:;$<$77=>?88>;?87$<$:99>877>:
"==$<$'@AB0C-&DC>D*E
Post- Consumer Polypropylene Tubs & Lids Bales
PP thermoform examples: yogurt cups, margarine tubs & lids, drink cups, clam shells, food trays
PP blow mold examples: hot-fill jugs and bottles (i.e. ketchup, tea, juice)
KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.
All scrap materials purchased are for recycling. For more information, please visit www.kwplastics.com
COMPOSITION + QUALITY STANDARDS
CONTAMINANTS
PRICING
REJECTIONS + PRICE ADJUSTMENTS
FREIGHT CHARGES
A PP Tubs & Lids Bales, as defined by KW Plastics, should container
post-consumer PP. We anticipate and accept up to 20% LDPE within
the bale. All metal components should be removed.
Bales may measure 3x4x5’, 4x6x4’ or other standard size and should
be secured with 10-12 gauge galvanized baling wire or other non-
corroding strapping. Bales should not be stored outside, unocovered
any longer than four weeks prior to shipment. Cardboard may be used
to prevent exposure and maintain bale integrity.
All prices are FOB selling point unless otherwise
agreed. Base price per pound is determined by
freight expense, material quality and a truck load
weight of 40,000 pounds (see freight charges). All
trucks are weighed empty and full on scales
calibrated to 10 lb. accuracy. KW weights govern
settlement. Price reductions/ freight charge may
apply.
Material purchased not meeting quality standards
so as to render the material difficult to process or
completely unmanageable will be subject to price
adjustments or rejection. If a load or partial load is
rejected due to non-conformity to specifications,
the material supplier shall be responsible for any
and all additional costs resulting from the rejection
of such load including, but not limited to inbound/
outbound shipping, demurrage, additional labor
charges, landfill fees and other associated costs.
Arrangements to pick-up or return rejected material
must be made in a timely manner to avoid
additional demurrage charges.
NET WEIGHT PRICE
35,000 lbs + base price
34,999 - 30,000 lbs. base price -$.01/lb.
29,999 - 25,000 lbs. base price -$.0 15/lb.
24,999 - 20,000 lbs. base price -$.0 25/lb.
19,999 lbs. - below total freight
*Estimates. Charges may vary based on actual freight costs.
> More than 4% of bale weight of plastic not of the specified type: i.e.,
PET, PVC, PS, film or fiber
> More than 2% of any other material that is not plastic: i.e., metal,
styrofoam, paper, cardboard, wood, rubber, liquid. paint or other
residuals, etc.
> Excessive amount of debris (sand, rocks, dirt, etc.) or moisture
> Heavy baler residue, grease or grime
> Any plastic that has detoriated from sun or weather exposure
KWR-Purchasing Spec-PP TUBS+LIDS Bales-20130708 TMB
KWR PURCHASING DEPARTMENT
[ phone: 800-633-8744 ]
Billy Jefcoat, ext. 420 [email protected]
Andy Johnson, ext. 417 [email protected]
Jason Richburg, ext. 202 [email protected]
Daron Warren, ext. 428 [email protected]
We anticipate and accept up to 20% LDPE within the bale.
Examples of scrap material include: PP thermoform: yogurt cups, margarine tubs & lids, drink cups, clam shells and food trays), PP blow mold: (hot-fill jugs & bottles-i.e. ketchup, tea, juice bottles)
S. Baker | KW Plas/cs Recycling Division
KW Plastics Recycling DivisionPurchasing Specification Sheet!"#$%&'($)*+,-.$/0'($12$$34*.5$6/$789:;$<$77=>?88>;?87$<$:99>877>:"==$<$'@AB0C-&DC>D*E
Polypropylene FIBC BalesPost-Consumer and Post-IndustrialExamples may include: bulk bags used for dry goods such as granules, resin, seeds, peanuts, starch, etc.
KW PLASTICS IS THE INTERNATIONAL LEADER IN HIGH DENSITY POLYETHYLENE AND POLYPROPYLENE RECYCLING.All scrap materials purchased are for recycling. For more information, please visit www.kwplastics.com
COMPOSITION + QUALITY STANDARDS
CONTAMINANTS
PRICING
REJECTIONS + PRICE ADJUSTMENTS
FREIGHT CHARGES
An flexible intermediate bulk container (FIBC) bale should contain woven bulk bags. We understand the bale will likely contain other plastic components such as nylon, PET and LDPE. These contami-nants should be kept to a minumum.
Bales may measure 3x4x5’, 4x6x4’ or other standard size and should be secured with 10-12 gauge galvanized baling wire or other non-corroding strapping. Bales should not be stored outside, unocovered any longer than four weeks prior to shipment.
Any items that previously contained hazardous material, residue and/or medical waste will be rejected.
All prices are FOB selling point unless otherwise agreed. Base price per pound is determined by freight expense, material quality and a truck load weight of 40,000 pounds (see freight charges). All trucks are weighed empty and full on scales calibrated to 10 lb. accuracy. KW weights govern settlement. Price reductions/ freight charge may apply.
Material purchased not meeting quality standards so as to render the material difficult to process or completely unmanageable will be subject to price adjustments or rejection. If a load or partial load is rejected due to non-conformity to specifications, the material supplier shall be responsible for any and all additional costs resulting from the rejection of such load including, but not limited to inbound/ outbound shipping, demurrage, additional labor charges, landfill fees and other associated costs. Arrangements to pick-up or return rejected material must be made in a timely manner to avoid additional demurrage charges.
NET WEIGHT PRICE30,000 lbs + base price29,999 - 25,000 lbs. base price -$.01/lb.24,999 - 20,000 lbs. base price -$.0 15/lb.19,999 - 15,000 lbs. base price -$.0 25/lb.15,000 lbs. - 0 lbs. total freight*Estimates. Charges may vary based on actual freight costs.
> Any plastic not of the specified type: i.e., PET, HDPE, PVC, LDPE, PS, Other (may be marked as #7)> More than 2% of any other material that is not plastic: i.e., metal, styrofoam, paper, cardboard, wood, rubber, liquid. paint or other residuals, etc. > Excessive amount of debris (sand, rocks, dirt, etc.) or moisture> Foil Liners> Free flowing material> Chemicals and/ or additives: i.e., carbon black, super absorbant polymers, frac sand, etc.> Any plastic that has detoriated from exposure to sun
KWR-Purchasing Spec-PP FIBC Bales-20130401 TMB
KWR PURCHASING DEPARTMENT[ phone: 800-633-8744 ]
Billy Jefcoat, ext. 420 [email protected] Andy Johnson, ext. 417 [email protected] Richburg, ext. 202 [email protected] Warren, ext. 428 [email protected]
Bulk bags used for dry goods such as granules, resin, seeds, peanuts, starch, etc. Commonly referred to as “super sacks”.
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
KW Plastics Recycling Division 279 Pike County Lake Road Troy, AL 36079 800-633-8744 www.kwplastics.com
Opportunity or Threat?
China’s Green Fence & Mixed Plastics
Stephanie Baker KW Plastics Recycling Division
279 Pike County Lake Road Troy, AL 36079 P.O. Drawer 707 Troy, AL 36081
800-633-8744 www.kwplastics.com