kverneland u-drill rigid 3000 and 4000 u-drill rigid 3000 plus and 4000 plus 2016
TRANSCRIPT
Kverneland u-drill rigid 3000 and 4000
u-drill rigid 3000 plus and 4000 plus 2016
Content
Design/ Technical Feature• Frame• Tools• Dosing/ Hopper• Coulterbar• CD Coulter• Electronic (ISOBUS)• Hydraulic• Grain and fertilizer version• Options• Technical datas
Design/ Technical Features
• Working width 3.0m and 4.0m• 3.000 l Hopper volume• electric metering device
– New generation with changeable rotors.
– ISOBUS as standard
• Large wheel rear wheel packer 900mm with off-set (250mm)
• Electro-hydraulic disc harrow depth adjustment via ISOBUS terminal.
• Electro-hydraulic seed depth adjustment via ISOBUS terminal.
• New Double Steel Disc Coulter incl. Press Wheel
• Options – Track Marker, Auger, Front Wheel Packer, Weight Cells, choice of Following Harrow, etc.
Design/ Technical Features- Frame
V shape main frame design
• Good access for calibration • Easy to maintain• Very robust design while adding less
weight• Extendable drawbar system• Consequently further bolted design of the
entire machine (smaller welded components)
– Easy to exchange worn or damaged frame components.
Design/ Technical Features- Frame
Coupling of the machine
• Cross shaft Cat III N• Optional CAT III• 90° turns on headland• Optional drawbar extension 500 mm
Design/ Technical Features- Frame
Front packer
• Option• Driven by Headland Management• 800 mm diameter• 3 wheel packer at 3m• 3 + optional 2 packer at 4m• Hydraulic lifting• Possibility to work without
Design/ Technical Features- Tools
Track eradicator
• Optional• 2 x two TS coulter tines• Driven by Headland management• Spring loaded, pressure 50 kg• Depth adjustment via bolt• Hydraulic lifting and lowering• Possible to work without
Design/ Technical Features- Tools
Track marker arms
• Option• Hydraulic folding• Driven by Headland management• Similar like on s-drill and i-drill• Notched disc with support ring, angle
adjustable• Shear bolt protection
Side plates
• Side plates foldable, adjustable and hydr. Lifting via disc harrow unit
• Series equipment• Left and right side• Foldable for street transport• Self lifting, linked to the disc
harrow
Design/ Technical Features- Tools
Compact Disc Harrow
• Full working width, real 3 or 4m width• 18“ discs = 46 cm diameter• Elastic and hard: 55- 58 HRC• Distance row 1 to row 2 = 80 cm• Optional star disc for ploughed land
Design/ Technical Features- Tools
• Compact Disc Harrow (Ø 460mm), – 24 conical disc, for optimum cutting
performance.– „Qualidisc“ bearings and angle
settings.– Infinitely depth setting from 0-13cm
via new transducer technology.– Master & Slave hydraulic.– Parallelogram side deflectors as
standard.– Individual depth adjustment of
each disc section.
Design/ Technical Features- Tools
2 ball bearing with oblique contact 40°
Seal with 5 lipsShaft ø 35 mm
O-ring
The disc can not move sideways in cutting position: the disc has always the same cutting angle
If the disc hits an obstacle, the disc arm is able to move sideways and the safety system works as a 3D auto-reset system
Strong torque of the safety system for high disc diameter
Rear wheel packer
• 90 cm diameter• Offset 25 cm for smooth running• 4 x CD coulter after every wheel• Wheel scraper optional
Design/ Technical Features- Tools
Design/ Technical Features- Tools
Seed hopper
• Hopper capacity 3.000l• G&F 3.000l (60/40 and 50/50)• Dividing plate is mountable• Tarp cover• Central dosing unit• 2 wing dosing units at + machines• Low level sensor
Design/ Technical Features- Tools
Seed hopper
• Low level sensor adjustable• Loading steps for save access
Design/ Technical Features- Hopper & Dosing
• Loading steps, in-& outside as well as LED lighting inside the hopper.
• Tarp cover for easy front end loader filling• one distribution head located over the center
of the coulter bar section.• Options:
– Working Lights LED – new generation– Weight Cell System – not in ISOBUS, stand alone
system.
• Electric driven Kverneland Accord metering device.
• Seed rate from 2- 380 kg per ha• Calibration flap with integrated gate – no seed
dropping into the hose.• Penstock as standard.• Remote control for calibration test at the metering
unit.• Emptying flaps
Design/ Technical Features- Hopper & Dosing
• One central coulter bar box-tube• 3-Point parallelogram linkage• Series central seed depth adjustment via
ISOBUS terminal.• Hydraulic coulter pressure adjustment.• Distribution head on coulterbar (24 or 32
outlets) • No left or right and long or short coulters
– Easy on wearing parts.
• Standard - Depth Guidance-/ Press- Wheel (
Design/ Technical Features- Coulterbar
• Two Steel Disc (Ø410mm) with off-set
– Very slim design – therefore less soil movement,
thus less pressure is required to achieve seeding
depth – thus more of the available coulter pressure
can be utilized at the press wheel when needed -
MAX 80-100kg.
• In depth following coulter.
• Integrated „Depth-Guidance- and Press Wheel“ – large
Ø380mm for a smooth ride.
• Optional press wheel scraper
• New flexible rubber design with self cleaning effect for
the Press-Wheel - no scraper required.
Design/ Technical Features- Coulter
• Disc bearing are fully integrated – easy flow.• Plastic inner disc scraper
– Tool less exchange– Low priced wearing part– Less wearing to the disc – compared to steel on steel
• Changeable front disc guard – bolt-on solution.• Very robust, simple and clear design.• Coulter staggering 200mm.• Central pressure adjustment.
– Infinitely from 0-100kg
Design/ Technical Features- Coulter
Dosing Units• ESA II- e-Com– ISOBUS• Speed signal via radar
Machine Control • New software surface.• Electronic transducer systems allow depth control for
disc harrow and seed depth via tractor terminal (optional for seeding depth)
• Speed signal via radar• Headland Management – fully atomized hydr.
functionality while turning – – User friendly– Only one double acting valve required (with exception of the
fan drive)
Tractor Requirements: 12V >70A
Design/ Technical Features- Electric & ISOBUS
Headland Management• Front-Wheel-Packer• Disc Harrow Section• Track Marker Arms• Track Eradicators• Pre-emergence Marker• Coulter bar Seeding Depth • Filling Auger
All functions require only one double acting valve
Hydraulic fan drive• 1 x single acting• 1 x pressure less return <10bar
Tractor Requirements: >80 l/min
Design/ Technical Features- Hydraulic
Design/ Technical Features- Options
Working lights LED „New Generation“
• Lightning for work at night• Controls the coulter bar• inside the hopper is standard
Design/ Technical Features- Options
Additional harrow
• Soil flow harrow• Between disc harrow and packer• Adjustable per bolt• Lifting via disc harrow unit
Design/ Technical Features- Options
Brakes
• Pneumatic brake system• Hydraulic brake system• Referring to the local traffic regulations
Design/ Technical Features- Options
After harrow
• 10 mm S-type harrow series• 12 mm finger Harrow option• Angle adjustable• Hight and pressure adjustable with cranck• Auto reset system
Design/ Technical Features- Options
Pre emergency marker
• Optional• Driven by Headland management• Two single arms• Hydraulic steered• Fold in position
28
Design/ Technical Features- Options
• Optional• Two single arms• Hydraulic steered• Driven by Headland management • For symmetric rhythms• Foldable for road transport• Activated during tramline rhythm
Design/ Technical Features- Options
Additional Options• Independent weight cell system.• Weighs hopper content• Shows weight deviation to calculate output
kg/ha• Not combinable with the ESA system
Design/ Technical Features- Options
Electronic• IM Tellus – ISOBUS Terminal• IM Eye camera• GeoControl
31
U-drill plus- grain and fertilizer version
• Double Hopper 3.000 l• Only e-com steering• 2 options for fertilizer application as:
• Double entry coulter each 12,5 cm in the shadow of the seed line
• Disc Harrow application on the second ow to be placed between 2 seed lines
Universal Seeder - USP’s
• Competitive pricing.• Very high user friendliness – e.g. easy access to Dosing units, Headland Management, etc. • Low pulling force, due to large packer + off-set.• Service friendly – modular frame concept, easy access, less grease points, etc.• New features for Terminal-Guided depth control for disc harrow and seed depth.• Well know and proven compact disc harrow concept „Qualidisc“ – aggressive, long life bearing,
maintenance free, equal cutting performance, etc.• New Dosing Unit generation• Central seed depth adjustment.• New Double Disc Coulter
– Extreme slim design – less pressure required for penetration.– Less pulling force – due to less soil movement.– Integrated depth guidance and press wheel functionality.– Maintenance free, high performance bearings.– Only one coulter – no left/ right nor short/ long coulters.
• ISOBUS Confirm
Technical Data
Technical DataModel u-drill rigid u-drill plusWorking width (m) 3.0 4.0 3.0 4.0
Transport width (m) 3.0 4.0 3.0 4.0
No. of CD coulters 24 32 24 32
No. of metering devices 1 1 2 2
Hopper capacity (l) 3000 3000
Required oil volume
Single-acting hydr. valve + zero-pressure return for fan drive l l l l
1 x double-acting hydraulic valve for machine control l l l l
Power requirement 12 V > 70 A l l l l
CD double disc coulters l l l l
Coulter pressure up to 100kg l l l l
Electro-hydraulic adjustment of the placement depth via ISOBUS terminal l l l l
Press wheels (Ø 380 x 50mm) l l l l
Row spacing (12.5cm) l l l l
Coulter staggering 17.5cm l l l l
Electronic adjustment of the seed quantity with radar l l l l
Filling level sensors in the seed hopper l(1) l(1) l(2) l(2)
Fan speed sensor l l l l
Metering device monitoring l l l l
Electronic half-width shut-off - - l l
Mid-mounted front packer (Ø 800mm) m m m m
Complete front packer (Ø 800mm) - m - m
Electro-hydraulic adjustment of the disc harrow working depth via ISOBUS terminal l l l ll Standard equipment m Option
Model u-drill rigid u-drill plusDisc harrow (Ø 460mm) l l l l
Offset tyre packer (Ø 900mm) l l l l
Maintenance platform, road transport lights, in-hopper light l l l l
Hydraulic fan drive l l l l
Lower link suspension Cat. 3N (825mm) l l l l
Lower link suspension Cat. 3 (965mm) m m m m
Lower link suspension Cat. 4 (965mm) - - - -
S-shaped seed harrow 10mm l l l l
Finger harrow 12mm m m m m
Calibration set l l l l
Filling auger - - - -
Hydraulically folding track marker with notched discs m m m m
Track eradicators (2 tines per track) m m m m
Pneumatic brakes m m m m
Hydraulic brakes m m m m
Extended drawbar for tractors with twin tires up to 4.5m m m m m
Pre-emergence marker (centre marking) m m m m
LED work lights m m m m
iM Tellus for non-ISOBUS-capable tractors m m m m
iM Tellus for ISOBUS tractors m m m m
Hopper volume weighing system with separate monitor m m - -
Headland management l l l l
Weight (kg) (with front packer + track eradicators) 4,600 5,400 4,800 5,600
Min. power requirement (kW) 90 130
l Standard equipment m Option
Technical Data
See ourMachines at workon YouTube
www.kverneland.com
visit us at www.kvernelandgroup.com
The Future of Farming