kuldeep yadav resume
DESCRIPTION
resumeTRANSCRIPT
KULDEEP YADAV 3rd Year Undergraduate E-Mail: [email protected] IIT Kanpur Phone: (+91)-9565873770
EDUCATIONAL QUALIFICATIONS
*at the end of 5th semester
AREAS OF INTEREST
Non-Destructive Evaluation Vehicle dynamics
Finite Element Modelling Engineering Design and Manufacturing
SCHOLASTIC ACHIEVEMENTS
Secured a percentile of 99.25 in IIT-Joint Entrance Examination 2010 among a total of close to 0.5 million candidates
Secured a percentile of 99.4 in All India Engineering Entrance Examination-2010 among a total of close to 1.2 million candidates
Among top 10 student of Lucknow city in the Class 12th Board Examinations and Ranked 2nd in K. V. Sangathan, Lucknow
Cleared Bhartiya Sankriti Gyan Pariksha (2005) in 1st Division
RESEARCH PROJECTS
Non-Destructive Testing: Reconstruction of defects using Ultrasonic Phased Array Probe (May ’12 – July ‘12) (Guide: Dr. N. N. Kishore, Professor, Mechanical Engineering, IIT Kanpur)
Flaw detection was done using Omni Scan MX machine with a high precision
Analysis of data taken on samples is done using tomoview 2.9R8 software
Complex flaw reconstruction was done with a very high precision of a 1.5 mm dia circular hole
An algorithm was developed and Programming was done on Matlab to generate the actual shape and size of the flaw in different types of material.
Reduced the defect size in sample until the error in reconstruction of defect exceeds 1%
Explored the possibilities of extension of this research to practical tasks like inspection and analysis of rail tracks, aeroplane
components, heavy machine components, etc.
Formula SAE IIT Kanpur (May ’11 – present)
(Participating in FS ’13 event, Italy: Organised by Associazione Tecnica dell'Automobile (ATA))
Designed a Rack and Pinion steering system for Formula racing car which lock to lock rotates at steering wheels
and at wheels
Optimization of steering arm length and steering arm angle was done to achieve 100 % Ackermann steering geometry
Achieved the steering at the minimum radius of 2.8 metres
Achieved the zero bump steer in geometry
Load calculations and analysis was done of each component by using FEM tools in Solidworks software
Designed double wishbone suspension system for the Formula racing car with very less migration of roll centre in lateral
and vertical direction
Load calculation and analysis of A-arms was done in Ansys
Full working suspension system is analysed in Lotus software
Vehicle dynamics analysis was done for optimum performance of car
Moving Mobile Sniffer (May – June ’11) (Project done in a team of 4 under the guidance of HAM Club, IIT Kanpur) Successfully instrumented a mobile sniffer with a working range of 1.5 metre Circuit simulation was done on Proteus ISIS and was then implemented on a multipurpose board
TECHNICAL SKILLS
Programming/Scripting: C/C++, Octave, HTML, CSS
Platform: Windows, Linux
Software: MS-Office, MATLAB, Autodesk INVENTOR, SOLIDWORKS, ANSYS, ADAMS, AUTOCAD, CV-AVR, AVR Studio, Proteus ISIS
Departmental Skills/Techniques: Manufacturing Processes ( Lathing, Milling, Drilling), Welding Processes (Arc, TIG, MIG, Brazing),
Casting, Molding, CNC Machining, Omniscan MX Machine (Flaw detection)
Year Examination/Degree Institution CPI/Percentage
2010 – present B.Tech, Mechanical Engineering IIT Kanpur 9.1/10.0*
2009 Class 12 (CBSE) Kendriya Vidyalaya Lucknow Cantt. 94.6%
2007 Class 10 (CBSE) Kendriya Vidyalaya Lucknow Cantt. 90.8%
RELEVANT COURSEWORK
Finite Element Methods in Engineering Mechanics* Advanced Mechanics of Solids Theory of Mechanisms and Machines
Numerical and Computational Methods Design of Machine Elements* Vibration and Dynamics of Machinery*
Manufacturing Technology Engineering Design and Graphics Energy Systems*
Thermodynamics Nature and Properties of Materials Fluid Mechanics
Heat and Mass Transfer Nuclear and Reactor Physics Cognitive Science*
*Courses currently in progress
TERM PROJECTS AND PRESENTATIONS
Mechanical Hand (Aug – Oct ’11) (Guide: Dr. Kallol Mandol, Assistant Professor, Materials Science and Engineering, IIT Kanpur)
Course project in Manufacturing Processes (Mechanical Engineering) done in a team of five members
Developed a fully mechanized replica of the human hand
Complex mechanical mechanism was used for fingers
Optimization was performed and a high strength to weight ratio was achieved
Can withstand high temperature, pressure and can work in extreme conditions
Atomium (Aug – Oct ’11) (Guide: Dr. Kallol Mandol, Assistant Professor, Materials Science and Engineering, IIT Kanpur)
Course project in Manufacturing Processes (Mechanical Engineering) done in a team of six members
Fabrication of a non-working miniature model of Atomium which is a monument in Brussels, Belgium was done by
employing various manufacturing processes such as welding, casting and metal sheet-forming
High coordinate calculations was done for achieving high accuracy in dimensions and angles of model
Stair Climbing Machine (Mar ‘11 – Apr ’11) (Guide: Dr. Nachiketa Tiwari, Assistant Professor, Mechanical Engineering, IIT Kanpur)
Course project in Engineering Design and Graphics (Mechanical Engineering) done in a team
Designed a bio-inspired caterpillar like mechanism with capabilities of stair climbing
3-D modelling was done and structural analysis was performed using FEM tools in Autodesk inventor
Load calculations was done and animations were made for accurate designing of robot
POSITIONS OF RESPONSIBILITY
Coordinator, HAM Club, IIT Kanpur (Apr ’12 – present)
Mentored 3 projects in summer 2012
Initiated the process for setting a HAM radio station facility in IIT Kanpur
Initiated the process for HAM Licence Examination (ASOC) in IIT Kanpur
Setting up the only node for data transferring in IIT Kanpur for the North India
Conducted various workshops like antenna designing and making, morse code learning and also some useful disaster
management workshops
Coordinator, Radioactive, Techkriti ‘13 (Sept ’12 – present)
Successfully conducting Morse code speed challenge and Fox hunt competition as a part of Techkriti
Introducing new competition of conceptualising, designing and making of antenna on a given particular condition
Managing around 50 teams in Fox Hunt competition
Steering system Head IITK Motorsports: SAE Team IIT Kanpur (Jul ’11 – present)
Managed a team of 6 students with a goal of developing a steering system for a Formula racing car
Also working as senior member in Vehicle Dynamics Team for SAE IIT Kanpur
EXTRA CURRICULAR ACTIVITIES
Completed 1 year course in basic German language conducted by German embassy
Secured 1st position in the Short Movie Clip during Spectrum, the inter-hall films and media competition at IIT Kanpur (2012)
Secured 2nd position in the Movie Quiz during Spectrum, the inter-hall films and media competition at IIT Kanpur (2012)
Member of winning cricket team in Josh’ 12 (Intra IIT Kanpur Sports Competition)
Member of runner –up football team of Institute Football League’ 12