kuhn ke solenoid
DESCRIPTION
kuhnke solenoid specificationTRANSCRIPT
Kuhnke Technical Data
The following page(s) are extracted from multi-page Kuhnke product catalogs or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have been combined to provide technical information about the specific product(s) you have selected. Hard copy product catalogs, and CDROMs have been published describing Kuhnke Pneumatics, Solenoids, Relays and Electronics; some divided into different books. A list of current publications is available on this web site or from our sales offices. Some may be available for download, but as substantially larger files.
Contact Details
Kuhnke sales and service in North America Ellis/Kuhnke Controls 26 West Highland Avenue Atlantic Highlands New Jersey 07716 USA T: 800-221-0714 T: 732-291-3334 F: 732-291-8154 Email: [email protected]
Important Note The information shown in these documents is for guidance only. No liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper application of the parts, assemblies or equipment described.
Hochleistungs-Hubmagnete RM, URM
Heavy Duty SolenoidsSeries RM, URM
Typ RM einfachwirkendTyp URM umkehrwirkend
Die Typen RM und URM sind Hoch-leistungshubmagnete in geschlossenerBauweise. Diese Ausführungen sind be-vorzugt dort einzusetzen, wo höchsteLebensdauer gefordert wird. Durch einebeidseitige wartungsfreie Ankerlagerungwird diese Forderung erfüllt. Sie könnenin beliebiger Einbaulage montiert wer-den.
Die Spulenspannung wird in der Regel inGleichspannung ausgeführt (Wechsel-spannung auf Anfrage).
Neben den Standardtypen steht eineVielzahl von Sonderhubmagneten zurVerfügung (siehe Beispiele Seite 37-39).
Hochleistungs-Hubmagnete Geschlossene BauweiseTechnische Beschreibung/Vorzugstypen
Heavy Duty Linear SolenoidsFully Encapsulated Design
Technical description/Preferred types
104 Main catalogueMagnet Hauptkatalog
Series RM single acting,series URM two directional
Series RM and URM heavy duty solenoidsare fully enclosed. These specificationsare designed for maximum durability, thisbeing ensured by service-free armature bearing on both sides. These solenoidscan be mounted at any angle.
The coil voltage is usually designed forDC (AC on request).
Apart from the standard models we offeryou a multitude of custom-made linearsolenoids (see examples on pages 37-39).
RM070W-HROO-F
24VDC 100% ED
RM070W-HRRO-F
24VDC 100%
ED
RM070W-OBOO-F
24VDC 100% ED
RM070W-OROR-F
24VDC 100% ED
Die obenstehenden Hochleistungs-Hub-magnete Typ RM werden als Vorzugs-typen lagermäßig geführt, damit Sie ei-nen schnellen und preisgünstigen Zugrifffür Ihre Versuche haben.
Die Vorzugstypen sind in kleinen Stück-zahlen (Zwischenverkauf vorbehalten)innerhalb einer Woche lieferbar.Sie sind ausgelegt für 24 V DC und 100 % ED.
Bei Verwendung einer verstellbarenSpannungsquelle kann der Magnet überdie Nennspannung hinaus betrieben wer-den, um die für die Betätigung erforderli-che Kraft zu erreichen.
Beachten Sie hierbei bitte, daß bei län-gerem Betrieb an erhöhter Betriebsspan-nung diese Magnete überhitzt werden,wenn nicht ausreichende Pausen bei ei-ner max. Spieldauer (Einschaltzeit + Aus-schaltzeit) von 5 Minuten eingehaltenwerden. Zu Ihrer Information hier der ma-thematische Zusammenhang:
U = Betriebsspannung (Anwender)UN = Nennspannung – bzw. Standard-
spannung 24 V DCED = relative Einschaltdauer (%)
Zur Ermittlung der für Ihren Anwendungs-fall erforderlichen Kraft ist der Spulen-strom zu messen. Die genaue Festlegungder Spule erfolgt in unserer Entwicklungs-abteilung: Geben Sie uns bitte hierzuden Magnetspulenstrom an, unter Berück-sichtigung der geforderten max. Ein-schaltdauer.
Hochleistungs-Hubmagnete Geschlossene BauweiseTechnische Beschreibung/Vorzugstypen
Heavy Duty Linear SolenoidsFully Encapsulated Design
Technical description/Preferred types
105 Main catalogueMagnet Hauptkatalog
The heavy duty solenoids listed in thetable are preferred types and are alwaysin stock, enabling you to have themdelivered quickly and at a competitiveprice for your tests.
The preferred types can be deliveredwithin a week (in small numbers) condi-tional to no resale. They are designed tooperate at 24 V DC and 100 % ED.
If an adjustable voltage source is used,the solenoid can be operated at a highervoltage than that given in the rating, inorder to obtain the required power.
However, these solenoids are subject tooverheating during long term use with in-creased voltage, unless sufficiently longintervals and a maximal operating time(switch on time + switch off time) of 5min are observed.
U = applied operating voltageUN = rated voltage or standard voltage
24 V DCED = relative duty cycle (%)
In order to calculate the power requiredin your case, the coil current has to bemeasured. The exact determination ofthe duty cycle is made in our develop-ment laboratories. We would thereforeask you to supply us with the value forcoil current taking into consideration themax. duty cycle requested.
RM 20 – F – 24 V DC 100 % ED
VorzugstypenRMRM
3240
– F –– F –
24 V DC24 V DC
100 % ED100 % ED Preferred types
Hochleistungs-Hubmagnete RMRM
050070
RM 100
W*-OBOOW*-OBOO
– F –– F –
W*-OBOO – F –
24 V DC24 V DC
100 % ED100 % ED
24 V DC 100 % ED
Heavy duty linear solenoids
U
ED100
2.162U = N U
ED100
2.162U = N
* W = waagerechte Kennlinie * W = horizontal characteristics
Hochleistungs-HubmagnetRM 13
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 13
Thrust and pull type
Magnet Hauptkatalog 106 Main catalogue
509
+0,5
≤5
Ø5
M6
6+1
≤348
Ø132
Ø2 Ø1,
5
2,8
3
0 1 2 3 4 5 6S [mm]
F [N
]
0,1
0,2
0,5
10 %ED
100
50
25
5
1
2
5
8
Weight:Complete solenoid: appr. 25 gArmature: appr. 4 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 B 75Test voltage: 600 V (eff)
Return spring optional.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 25 g
Anker: ca. 4 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 B 75Prüfspannung: 600 V (eff)
In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Bestellformel RM 13 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
RM13
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Zulässige relative Einschaltdauer bei Luftkühlung (LK)
Litze (Standardlänge 10 cm) F24
100 % ED
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Perm. duty cycle under air cooled conditions (LK)1) Die Magnete sind auf Anfrage bis 60 V DC
lieferbar1) Other voltages are available on request up to
60 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 50 25 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20 W 2,9 5,4 10,1 43,3 W Nominal coil power P 20
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
Maße im bestromten Zustand
–––––––>Hubrichtung
Dimensions given with armature in fullyhome position–––––––>Direction of stroke
Weight:Complete solenoid: appr. 60 gArmature: appr. 12 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 C 300Test voltage: 800 V (eff)
Service-free DU armature bearing formaximum durability.Return spring optional.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 60 g
Anker: ca. 12 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 C 300Prüfspannung: 800 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Hochleistungs-HubmagnetRM 20
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 20
Thrust and pull type
Magnet Hauptkatalog 107 Main catalogue
Bestellformel RM 20 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
RM20
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Litze (Standardlänge 10 cm)Steckhülsenanschluß 2,8 DIN 46247
FM
24
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Terminal box (2.8 DIN 46247)
Zulässige relative Einschaltdauer bei Luftkühlung (LK) 100 % ED Perm. duty cycle under air cooled conditions (LK)1) Die Magnete sind auf Anfrage bis 60 V DC
lieferbar1) Other voltages are available on request up to
60 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 45 25 15 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20Anzugszeit (ED)
Wms
3,911
8 13,5 21 595
Wms
Nominal coil power P 20Actuation time (ED)
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 1 2 3S [mm]
F [N
]
1
2
5
100 %ED
100
45
2515
510
20
50
Ø20
Ø12Ø16
SW14
66,5
M3
288
1278
82
M3
M6
Maße im bestromten Zustand
–––––––>Hubrichtung
Dimensions given with armature in fullyhome position–––––––>Direction of stroke
Weight:Complete solenoid: appr. 117 gArmature: appr. 24 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 B 150Test voltage: 800 V (eff)
Service-free DU armature bearing formaximum durability.Linear force vs. stroke output optional.Return spring optional.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 117 g
Anker: ca. 24 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 B 150Prüfspannung: 800 V (eff)
Wartunsfreie Ankerlagerung (DU-Lager)für höchste Lebensdauer.Waagerechte Kennlinie auf Anfrage.In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Hochleistungs-HubmagnetRM 26
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 26
Thrust and pull type
Magnet Hauptkatalog 108 Main catalogue
Bestellformel RM 26 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
RM26
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Zulässige relative Einschaltdauer bei Luftkühlung (LK)
Litze (Standardlänge 10 cm) F24
100 % ED
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Perm. duty cycle under air cooled conditions (LK)1) Die Magnete sind auf Anfrage bis 60 V DC
lieferbar1) Other voltages are available on request up to
60 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 40 25 15 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20 W 5,5 12,2 18,9 35,3 84 W Nominal coil power P 20
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 1 2 3 4S [mm]
F [N
]
1
2
3
5
100 %ED
100
40
2515
5
10
20
50
Ø26
Ø17Ø19
SW17
72
M3
308
137,58
102
M3
M10
Maße im bestromten Zustand
–––––––>Hubrichtung
Dimensions given with armature in fullyhome position–––––––>Direction of stroke
Weight:Complete solenoid: appr. 235 gArmature: appr. 40 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 B 150Test voltage: 800 V (eff)
Service-free DU armature bearing formaximum durability.Linear force vs. stroke output optional.Return spring optional.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 235 g
Anker: ca. 40 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 B 150Prüfspannung: 800 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer.Waagerechte Kennlinie auf Anfrage.In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Hochleistungs-HubmagnetRM 32
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 32
Thrust and pull type
Magnet Hauptkatalog 109 Main catalogue
Bestellformel RM 32 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
RM32
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Litze (Standardlänge 10 cm)Steckhülsenanschluß A 2,8 DIN 46247
FM
24
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Terminal box 2.8 DIN 46247
Zulässige relative Einschaltdauer bei Luftkühlung (LK) 100 % ED Perm. duty cycle under air cooled conditions (LK)
RM 32-F
24VDC 100% ED
1) Die Magnete sind auf Anfrage bis 60 V DClieferbar
1) Other voltages are available on request up to 60 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 70 45 25 15 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20Anzugszeit (ED)
Wms
6529
10 16 24 48 12211
Wms
Nominal coil power P 20Actuation time (ED)
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 2 4 6 8S [mm]
F [N
]
1
2
5
100 %ED
100
50
251510
5
10
20
50
Ø1824
M3
94
M4
4510
24114 102
M4
Ø18
Ø32
Maße im bestromten Zustand
–––––––>Hubrichtung
Dimensions given with armature in fullyhome position–––––––>Direction of stroke
Weight:Complete solenoid: appr. 380 gArmature: appr. 60 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 C 300Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability.Linear force vs. stroke output optional.Return spring optional.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 380 g
Anker: ca. 60 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 C 300Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer.Waagerechte Kennlinie auf Anfrage.In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Hochleistungs-HubmagnetRM 40
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 40
Thrust and pull type
Magnet Hauptkatalog 110 Main catalogue
Bestellformel RM 40 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
RM40
Linear solenoid seriesDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Litze (Standardlänge 10 cm)Steckhülsenanschluß (6,3 DIN 46247)
FN
24
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Terminal box (6.3 DIN 46247)
Zulässige relative Einschaltdauer bei Luftkühlung (LK) 100 % ED Perm. duty cycle under air cooled conditions (LK)
RM40 - F
24VDC100 %ED
1) Die Magnete sind auf Anfrage bis 230 V DClieferbar
1) Other voltages are available on request up to230 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 75 45 25 15 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20Anzugszeit (ED)
Wms
1136
13,5 21 34 54 16511
Wms
Nominal coil power P 20Actuation time (ED)
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 2 4 6 8S [mm]
F [N
]
1
2
5
100 %ED
10075
4525
15
5
10
20
50
Hochleistungs-HubmagnetRM 40
Stoßende und ziehende Ausführung
Heavy Duty Linear SolenoidRM 40
Thrust and pull type
Magnet Hauptkatalog 111 Main catalogue
Ø22Ø30Ø40
M4
110
M5
2
4512
32165 122
M5
Ø20
Ø22
Maße im bestromten Zustand
–––––––>Hubrichtung
Dimensions given with armature in fully home position–––––––>Direction of stroke
Magnet Hauptkatalog 112 Main catalogue
Coil terminals
Examples of design types:without end stopwithout stoke limit in the open position
Anschlußarten
Beispiele für Ausführungen:Ohne Anschlagdeckel;keine Hubbegrenzung im offenen Zustand
Hochleistungs-HubmagneteRM 050 ... RM 100
Heavy Duty Linear SolenoidsRM 050 ... RM 100
Magnet Hauptkatalog 113 Main catalogue
–OBOO– –OBLO– –OBOR– –ORRO– –OROR–
–HBOO– –HBLO– –HBOL– –HRRO– –HROR–
Bestellformel RM 070 – W – O R O R – N – 24 V DC 100 % ED Order specificationsHubmagnetBauart ø mm
RM050
Linear solenoid seriesDesign type ø mm
060070080090
bis 160 mm auf AnfrageWaagerechte Kraft-Weg-KennlinieAusführung2)
Hubbegrenzung ohnemit
Stößel rechts3)
beidseitig
1001601)
W
OH
RB
160 mm optionalHorizontal frontal force vs. stroke outputDescription2)
Stroke limit
Plunger
withoutwithright hand side3)
both sidesFlansch ohne
rechts3)
Faltenbalglinks4)
ohne
Anschlußart
rechts3)
links4)
beidseitig5)
Litze (Standardlänge 20 cm)
NennspannungGerätestecker6) 24 V DC205 V DC (an 230 V ACnach SI-Gleichrichter-brücke)
Zulässige relative Einschaltdauer bei Luftkühlung (LK)
ORL
ORLB
F
Flange
Gaiter
Coil terminals
N24
205Operating voltage
100 % ED Perm. duty cycle under air cooled conditions (LK)
withoutright hand side3)
left hand side4)
withoutright hand side3)
left hand side4)
both sides5)
Flying leads (20 cm standard length)plug-in socket connection6) 24 V DC205 V DC (connected to230 V AC with SI- bridgerectifier)
1) Bis 160 mm auf Anfrage2) Siehe unten3) Entgegengesetzt zur elektr. Anschlußseite4) An der elektr. Anschlußseite5) Nur mit Hubbegrenzung lieferbar6) Für Steckhülse 6,3 DIN 46247 und
Gerätesteckdose Z 801 und Z 811Zubehör siehe Seite 130-131
1) Up to 160 mm optional2) See below3) Opposite to electrical connection4) Same side as electrical connection5) Available only with stroke limit6) For plug-in socket 6.3 DIN 46247 and plug
Z 801 and Z 811Accessories see pages 130-131
N F
ca.1
2ca
.12
200
+15
Hochleistungs-Hubmagnet RM 050
Gewicht:Magnet: ca. 610 g
Anker: ca. 200 gStandard:
Spannung: 24 V DCLitze: 20 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 450Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 10 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 050
Heavy Duty Linear SolenoidRM 050
Heavy duty linear solenoid RM 050
Weight:Complete solenoid: appr. 610 gArmature: appr. 200 g
Standard:Voltage: 24 V DCFlying leads: 20 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 450Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard strokelimiter: 10 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 114 Main catalogue
Zul. rel. Einschaltdauer (ED)1) % 100 60 35 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
2040
30 55 70 115 30015
Wms
Nominal coil power P 20Actuation time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 2 4 6 8 10S [mm]
F [N
]
10
20
50
1000 %ED
100
60
352515
5100
200
500
Hochleistungs-HubmagnetRM 050
Heavy Duty Linear SolenoidRM 050
Magnet Hauptkatalog 115 Main catalogue
M5
M5
Ø30
165
325
5M
4
173019 50
42
5041
516
Ø34
50
736
5713
5
Ø4,
8
Ø50
Ø40
Ø30
Ø50
Ø40
M5
M5
Ø30
10
1628
532
55
M4
323019 50
42
65
16
Ø34
Ø34
65
7
72
Ø4,
8
Ø30
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
Hochleistungs-Hubmagnet RM 060
Gewicht:Magnet: ca. 1300 g
Anker: ca. 250 gStandard:
Spannung: 24 V DCLitze: 20 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 450Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 12 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 060
Heavy Duty Linear SolenoidRM 060
Heavy duty linear solenoid RM 060
Weight:Complete solenoid: appr. 1300 gArmature: appr. 250 g
Standard:Voltage: 24 V DCFlying leads: 20 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 450Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard strokelimiter: 12 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 116 Main catalogue
Zul. rel. Einschaltdauer (ED)1) % 100 40 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
2545
60 98 150 38117
Wms
Nominal coil power P 20Actuation time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 5 10 12 15S [mm]
F [N
]
10
20
50
1000 %ED
100
4025
15
5
100
200
500
Hochleistungs-HubmagnetRM 060
Heavy Duty Linear SolenoidRM 060
Magnet Hauptkatalog 117 Main catalogue
2934
M6
M6
Ø35
1837
541
57
17
64
718
Ø36
65
8
72152
Ø36
M6
M5
3019 67
54
Ø5,
8
Ø60
Ø45
Ø35
M6
M6
Ø35
10
1829
541
57
34
81
18
Ø36
82
8
89
Ø36
M6
M5
3019 67
54
Ø5,
8
Ø60
Ø45
Ø35
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
Hochleistungs-Hubmagnet RM 070
Gewicht:Magnet: ca. 2000 g
Anker: ca. 400 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 450Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 15 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 070
Heavy Duty Linear SolenoidRM 070
Heavy duty linear solenoid RM 070
Weight:Complete solenoid: appr. 2000 gArmature: appr. 400 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 450Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard stroke limiter: 15 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 118 Main catalogue
Zul. rel. Einschaltdauer (ED)1) % 100 40 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
3154
78 121 198 47225
Wms
Nominal coil power P 20Actuation time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 5 10 15 20S [mm]
F [N
]
10
20
50
1000 %ED
100
40
2515
5
100
200
500
Hochleistungs-HubmagnetRM 070
Heavy Duty Linear SolenoidRM 070
Magnet Hauptkatalog 119 Main catalogue
M8
10
2034
549
58
39
93
20
Ø43
94
10
103
Ø43
3019 80
62
Ø7
M8Ø38
M5
Ø70
Ø52
Ø38
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
M8
M8
2043
549
58
20
74
820 34
Ø38
Ø43
75
10
84177
Ø43
39
M5
3019 80
62
Ø7
Ø70
Ø52
Ø38
Hochleistungs-Hubmagnet RM 080
Gewicht:Magnet: ca. 2900 g
Anker: ca. 500 gStandard:
Spannung: 24 V DCLitze: 20 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 450Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 20 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 080
Heavy Duty Linear SolenoidRM 080
Heavy duty linear solenoid RM 080
Weight:Complete solenoid: appr. 2900 gArmature: appr. 500 g
Standard:Voltage: 24 V DCFlying leads: 20 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 450Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard strokelimiter: 20 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 120 Main catalogue
Zul. rel. Einschaltdauer ED)1) % 100 45 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
3775
94 149 226 68534
Wms
Nominal coil power P 20Actuation time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 5 10 15 20 25S [mm]
F [N
]
10
20
50
1000 %ED
100452515
5
100
200
500
Hochleistungs-HubmagnetRM 080
Heavy Duty Linear SolenoidRM 080
Magnet Hauptkatalog 121 Main catalogue
Ø45
Ø50
Ø50
M10
M10M10
85
23
9,5
9,5
655
5
8412
50 45 30
96216
30
19 30
Ø62
Ø80 7290Ø45
M5
Ø9,
5
Ø50
Ø50
M10
M10
M10
110
4810
9,5
2565
55
109
1250 45 30
12124
1
30
19 30Ø62
Ø80 7290Ø45
M5
Ø9,
5Ø45
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
Hochleistungs-Hubmagnet RM 090
Gewicht:Magnet: ca. 4500 g
Anker: ca. 800 gStandard:
Spannung: 24 V DCLitze: 20 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 600Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 25 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 090
Heavy Duty Linear SolenoidRM 090
Heavy duty linear solenoid RM 090
Weight:Complete solenoid: appr. 4500 gArmature: appr. 800 g
Standard:Voltage: 24 V DCFlying leads: 20 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 600Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard strokelimiter: 25 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 122 Main catalogue
Zul. rel. Einschaltdauer( ED)1) % 100 40 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
5185
102 194 303 74838
Wms
Nominal coil power P 20Actution time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 5 10 15 20 25 30S [mm]
F [N
]
10
20
50
2000 %ED
100
402515
5
100
200
500700
1000
Hochleistungs-HubmagnetRM 090
Heavy Duty Linear SolenoidRM 090
Magnet Hauptkatalog 123 Main catalogue
Ø55
Ø55Ø52
M12
M12
95
23
1111
4080
55
66
9412
60 55
106251
40
19 30
Ø68
Ø90 8010
0
Ø52
M6
Ø9,
5
Ø55
Ø55Ø52
124
12
136
19 30
Ø68
Ø90 8010
0
Ø52
M6
Ø9,
5
M12
M12
125
53
1140
805
555
40
12
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
Hochleistungs-Hubmagnet RM 100
Gewicht:Magnet: ca. 6400 g
Anker: ca. 1100 gStandard:
Spannung: 24 V DCLitze: 20 cm
Isolierstoffklasse: F (Tgrenz = 155 °C)
Isolationsgruppenach: VDE 0110 C 450Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer. Bei Ausführung mit Standard-Hubbe-grenzung Hub 30 mm. In Sonderausführung mit eingebauterRückholfeder lieferbar.
Kraft-Weg-Diagramm F = f (s)
W = Waagerechte Kennlinie
Kraft bei waagerechter Bewegungsrichtung und bei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen, bestromtenZustand
Hochleistungs-HubmagnetRM 100
Heavy Duty Linear SolenoidRM 100
Heavy duty linear solenoid RM 100
Weight:Complete solenoid: appr. 6400 gArmature: appr. 1100 g
Standard:Voltage: 24 V DCFlying leads: 20 cm
Insulation class: F (max. permissibletemperature = 155 °C)
Insulation groupaccording to: VDE 0110 C 450Test voltage: 2500 V (eff)
Service-free DU armature bearing formaximum durability. Stroke of version with standard strokelimiter: 30 mm.Return spring optional.
Force vs. Stroke diagramm F = f (s)
W = horizontal characteristic
Force measured when operating in horizontal position, at 90 % rated voltage and winding at operating temperature
stroke s = 0 corresponds to armature in fully homeposition
Magnet Hauptkatalog 124 Main catalogue
Zul. rel. Einschaltdauer (ED)1) % 100 40 25 15 5 % Perm. duty Cycle (ED)1)
Nennaufnahme P 20Anzugszeit (ED)
Wms
69110
162 255 400 107145
Wms
Nominal coil power P 20Actution time (ED)
1) Bei Montage auf eine Kühlfläche ist eine höhereED zulässig (bitte anfragen)
1) If solenoid is mounted directly onto a flat metalsurface the duty cycle can be extended (pleaseask for advice)
0 10 20 30 40S [mm]
F [N
]
10
20
50
2000 %ED
40
100
2515
5
100
200
500700
1000
Hochleistungs-HubmagnetRM 100
Heavy Duty Linear SolenoidRM 100
Magnet Hauptkatalog 125 Main catalogue
Ø60
Ø60
Ø58
M12
M12 M12
110
24
1212
5095
66
77
109
1371 65
122294
50
19 30
Ø76
Ø10
0
88110
Ø58
M8
Ø11
,5
Ø60
Ø60Ø58
M12
M12
144
58
1250
956
665
143
13
156
50
1419 30
Ø76
Ø10
0
88110
Ø58
M8
Ø11
,5
Hub
richt
ung
Hub
richt
ung
Direction of stroke
Direction of stroke
ohne Anschlagdeckel without end stop
mit Anschlagdeckel with end stop
Weight:Complete solenoid: appr. 105 gArmature: appr. 19 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 C 75Test voltage: 800 V (eff)
Long life expectancy through plasticbobbin armature bearing.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 105 g
Anker: ca. 19 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 C 75Prüfspannung: 800 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hochleistungs-Umkehr-HubmagnetURM 20
Heavy Duty Two-DirectionalLinear Solenoid URM 20
Magnet Hauptkatalog 126 Main catalogue
Bestellformel URM 20 – F – 24 V DC 100 % ED Order specificationsHubmagnetBauart
URM20
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)1)
Zulässige relative Einschaltdauer bei Luftkühlung (LK)
Litze (Standardlänge 10 cm) F24
100 % ED
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)1)
Perm. duty cycle under air cooled conditions (LK)1) Die Magnete sind auf Anfrage bis 60 V DC
lieferbar1) Other voltages are available on request up to
60 V DC
Zul. rel. Einschaltdauer (ED)2) % 100 45 25 15 5 % Perm. duty cycle (ED)2)
Nennaufnahme P 20Anzugszeit (ED)
Wms
3,911
8 13,5 21 595
Wms
Nominal coil power P 20Actuation time (ED)
2) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
2) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 1 2 3S [mm]
F [N
]
1
2
5
100 %ED
100
452515
510
20
50
Hochleistungs-Umkehr-HubmagnetURM 20
Heavy Duty Two-DirectionalLinear Solenoid URM 20
Magnet Hauptkatalog 127 Main catalogue
M3
M8
M3
9855 2220
9
96 Ø20
Ø16
SW14
2121
+0,6–0,2
±0,5
1 2
Maße gelten, wenn System 1 bestromt
<–––––––>Hubrichtung
Dimensions given when system 1 current-carrying<–––––––>Direction of stroke
Weight:Complete solenoid: appr. 1200 gArmature: appr. 180 g
Standard:Voltage: 24 V DCFlying leads: 10 cm
Insulation class: B (max. permissibletemperature = 130 °C)
Insulation groupaccording to: VDE 0110 C 75Test voltage: 2500 V (eff)
Long life expectancy through plasticbobbin armature bearing.
Force vs. Stroke diagramm F = f (s)
Force measured when operating in horizontal position, at 90 % rated voltage and with winding at operating temperature
stroke s = 0 corresponds to armature infully home position
Gewicht:Magnet: ca. 1200 g
Anker: ca. 180 gStandard:
Spannung: 24 V DCLitze: 10 cm
Isolierstoffklasse: B (Tgrenz = 130 °C)
Isolationsgruppenach: VDE 0110 C 75Prüfspannung: 2500 V (eff)
Wartungsfreie Ankerlagerung (DU-Lager) für höchste Lebensdauer.
Kraft-Weg-Diagramm F = f (s)
Kraft bei waagerechter Bewegungsrichtung undbei 90 % Nennspannung und betriebswarmerWicklung
Hub s = 0 entspricht dem angezogenen,bestromten Zustand
Hochleistungs-Umkehr-HubmagnetURM 50
Heavy Duty Two-DirectionalLinear Solenoid URM 50
Magnet Hauptkatalog 128 Main catalogue
Bestellformel URM 50 – N – 24 V DC 100 % ED Order specificationsHubmagnetBauart
URM50
Linear solenoidDesign type
Anschlußart
Nennspannung (Standardspannung)2)
Litze (Standardlänge 10 cm)Gerätestecker1)
FN
24
Coil terminalsFlying leads (10 cm standard length)
Nominal voltage (standard voltage)2)
Plug-in socket connection1)
Zulässige relative Einschaltdauer bei Luftkühlung (LK) 100 % ED Perm. duty cycle under air cooled conditions (LK)
URM50-N
24V = 100
% ED
1) Für Steckhülsen 6,3 DIN 462472) Die Magnete sind auf Anfrage bis 230 V DC
lieferbar
1) For socket 6.3 DIN 46247 2) Other voltages are available on request up to
230 V DC
Zul. rel. Einschaltdauer (ED)3) % 100 70 40 25 15 5 % Perm. duty cycle (ED)3)
Nennaufnahme P 20 W 15 24 38 56 89 280 W Nominal coil power P 203) Bei Montage auf eine Kühlfläche ist eine höhere ED zulässig (bitte anfragen)
3) If solenoid is mounted directly onto a flat metal surface, an increase in relative duty cycle is permissible (please ask for advice)
0 2 4 6 8S [mm]
F [N
]
10
20
50
1000 %ED
10070
402515
5100
200
500
Hochleistungs-Umkehr-HubmagnetURM 50
Heavy Duty Two-DirectionalLinear Solenoid URM 50
Magnet Hauptkatalog 129 Main catalogue
15610430
M5
M5 1515
ca.52
Ø40
30
Ø50
M4
ca.6
0ca
.72
1 2
19
Maße gelten, wenn System 1 bestromt
<–––––––>Hubrichtung
Dimensions given when system 1 current-carrying<–––––––>Direction of stroke
Plug-in socket for the applianceScrew joint PG 9for lead diameter 6-8 mm
Plug-in socket Z 811Plug-in socket with built-inSi-bridge rectifierType GDML 211-GB 1
Obtainable from:Firma Richard HirschmannPO Box 11073728 Esslingen
Flange(Mounting screws are part of theshipment)
Order specification
Gerätesteckdose Z 801Kabelverschraubung SPG 9für Kabeldurchmesser 6-8 mm
Gerätesteckdose Z 811Gerätesteckdose mit eingebautemSi-BrückengleichrichterTyp GDML 211-GB 1
Zu beziehen bei:Firma Richard HirschmannPostfach 11073728 Esslingen
Flansch(Befestigungsschrauben werden mitgeliefert)
Bestellbezeichnung
Hochleistungs-HubmagneteZubehör Typ RM
Heavy Duty Linear SolenoidsAccessories for Series RM
Magnet Hauptkatalog 130 Main catalogue
AKL
CB
H
ØE
ØF
ØD
ØI
ØJ
ØG
Bestell- Maße (mm) Dimensions (mm) OrderNr.
Z 839Typ
RM 050A
50,0B7,0
C12,0
D30,0
E23,0
F30,0
G–
H–
I4,8
J4,3
K42,0
L40,0
TypeRM 050
numberZ 839
Z 840Z 841Z 842Z 843
RM 060RM 070
70,080,0
RM 080RM 090
90,0100,0
8,010,0
13,015,0
12,012,0
17,017,0
35,038,0
29,032,5
45,052,0
38,043,0
35,038,0
60,570,5
45,052,0
80,590,5
1,01,0
5,87,0
1,01,0
9,59,5
5,35,3
54,062,0
6,46,4
72,080,0
45,052,0
RM 060RM 070
62,068,0
RM 080RM 090
Z 840Z 841Z 842Z 843
Z 844 RM 100 110,0 13,0 19,0 58,0 49,0 58,0 100,5 1,0 11,5 8,4 88,0 76,0 RM 100 Z 844
27,5M3
53
PG9
Ø22
,5
353,
5
16
End stop(Mounting screws are part of theshipment)
Order specification
Fork
1) Forks are galvanised and chromed yellow.Supplied without a nut. Secure using e.g. Loctiteor a simular product.
2) Further specifications (> M10) optional
Gaiters see accessories page 9
Anschlagdeckel(Befestigungsschrauben werden mitgeliefert)
Bestellbezeichnung
Gabelkopf
1) Gabelköpfe, verzinkt und gelb chromatiert,werden ohne Mutter geliefert. Sicherung z. B.durch Loctite o.ä.
2) Weitere Ausführungen (> M10) auf Anfrage
Faltenbalge siehe Zubehör-Übersicht,Seite 9
Hochleistungs-HubmagneteZubehör Typ RM
Heavy Duty Linear SolenoidsAccessories for Series RM
Magnet Hauptkatalog 131 Main catalogue
ØA
ØF
ØE
ØB
GH
DC
KI
ØJ
A
C
F
G
E
ØD
B
Bestell- Maße (mm) Dimensions (mm) OrderNr.
Z 838Typ
RM 050A
50,0B
40,0C
20,0D
15,0E
23,0F
30,0G5,5
H11,0
IM4
J4,3
K10,0
TypeRM 050
numberZ 838
Z 845Z 846Z 847Z 848
RM 060RM 070
60,070,0
RM 080RM 090
80,090,0
45,052,0
22,024,0
62,068,0
30,035,0
17,019,0
29,033,0
25,030,0
38,043,0
35,038,0
5,55,5
45,052,0
5,55,5
12,015,0
M5M5
20,025,0
M5M6
5,35,3
10,010,0
5,36,4
10,012,0
RM 060RM 070
Z 845Z 846
RM 080RM 090
Z 847Z 848
Z 849 RM 100 100,0 76,0 40,0 34,0 48,0 58,0 6,5 30,0 M8 8,4 14,0 RM 100 Z 849
Bestell-Nr.
Order-number
A B C D E F
An-schluß2)
Connec-tion G
38.30437.304
1223
1529
916
2,55
3,15
610
M3M5
36.30435.3041)
34.3042)
2732
3442
40 52
1926
68
32 10
68
1216
10 20
M6M8
M10
Magnet Hauptkatalog 132 Main catalogue