ksp screw press · 2020. 6. 3. · our screw press are used as optimal supplements in disposal...
TRANSCRIPT
-
KSP screw pressfor coarse and fine screenings: dewatered – compressed – transported
KSP screw pressfor coarse and fine screenings: dewatered – compressed – transported
Armour-plated conveyor screw · Reduction of disposal costs · Compact design · Sturdy construction Removable press water pan · Dewatering up to 40% dry matter
Increased dewatering area due to the slotted screen bottom · Special steady and counterbalance bearings
KUHN KSP screw press
Our screw press are used as optimal supplements in disposal processes,where separated, moist recyclings are dewatered, compressed and
transported away. Our machines have proven their worth overmany years, especially in municipal and industrial treatment
applications.
Design
The KUHN KSP screw press consists mainly ofa press frame with material feed hole andcompaction zone, conveyor and press screws,screw bearing, press water pan with drainconnection, support structure and gearedmotor.
The KUHN KSP screw press is designed as awelded stainless steel construction fully treated
in a pickling bath.
In the bearing housing, located between thegeared motor and the press frame, a steady bearing
and a counterbalance bearing can be found. The bearinghousing is closed by a special gasket on the spiral side.
An especially wear-resistant wedge wire is welded on to the bottomof the press frame to ensure safe and clog-free discharge of thepressure water.
The conveyor and press screw consists of a sturdy shaft with awelded-on screw; this screw is made out of solid profile steel rolledon the piece. The press screw is additionally armour-plated witha strong alloy in those places where the operational demandson the material are at their highest, thus additionally protectingit against wear. An appropriate perforation in the compactionzone ensures the discharge of pressure water.
The compaction zone is automatically flushed by using a solenoidvalve. An offset geared motor is applied as the drive.
Technical features
The superior design of our KUHN KSP screw press ensures anoptimal operation, both in an ecological and economical sense, andguarantees a long-term return on your investment, owing in partto the following advantages (overview):
• Small dimensions owing to its compact design
• Sturdy construction
• Long service life due to the use of high-quality materials
• Armour-plated conveyor screw
• Dewatering: up to 40% dry matter (depending on thematerial to be dewatered)
• Removable press water pan
• Reduction of disposal costs
• Special steady and counterbalance bearings
• Increased dewatering area due to a wedgewire
• A bagging mechanism may optionally be attached to thepress pipe for hygiene purposes as well as for keeping inodours.
-
KUHN GMBH · Franz-Kuhn-Straße 1-3 · 74746 Höpfingen, Germany · phone: +49 (0) 62 83 / 22 01-0 · fax: +49 (0) 62 83 / 22 01-88 · [email protected] R05/
08
KSP screw pressfor coarse and fine screenings: dewatered – compressed – transported
Values in ( ) for motors without explosion protection
Max. throughput rate, raw screenings
KSP 250 approx. 2.8 m3/hKSP 400 approx. 8.0 m3/h
Drive
Index of protection IP55 (explosion protection possible)Motors/Fittings parallel shaft gear motor
(bevel gear motor optional)
Flush water
min. pressure 2.5 barQuality min. filtered industrial water
(filter fineness ≤ 150 μm)
Materials
Press frame AISI 304 stainless steelPress screw special steel
Other materials on request.
All dimensions in mm.We reserve the right to make technical alterations.
Type A B C D E F G Ø H I Ø J K Pn [kW]
250/600 1875 (1775) 600 x 300
405
1023
500 607 450 76,1(DN65) 253273
(DN250) R 1/2 " 3.6 (4.0)
250/800 2075 (1975) 800 x 300 1223
250/1000 2275 (2175) 1000 x 300 1423
250/1200 2475 (2375) 1200 x 300 1623
250/1600 2875 (2775) 1600 x 300 2023
250/2000 3275 (3175) 2000 x 300 2423
400/600 2385 (2255) 600 x 402
608
1267
660 852 620 108(DN100) 350406,4
(DN400) R 3/4 " 6.8 (7.5)
400/800 2585 (2455) 800 x 402 1467
400/1000 2785 (2655) 1000 x 402 1667
400/1200 2985 (2855) 1200 x 402 1867
F
I
∅ J
G
A
B C
2050
2050D
20
E
∅ H
K
20
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice