1

KoolerBuy is Offering High Quality Filament for 3D Printing

3D printing filament is the blood of the printer. There are many types of filament available, andKoolerBuy specialize in 1.75 mm filament and 3.0 mm filament. 3D printing filaments atKoolerBuy are based on PLA or ABS.

Both PLA and ABS are great and people can make amazing things with both. The key is to tryboth materials and get a feel for what the users really want.

PLA is a plastic made of renewable starches such as corn and sugarcane. It is biodegradable anddoes not emit a lot of ultra fines particles (UFCs). It produces a barely noticeable, but quitepleasant, sugary smell when extruding. PLA is less prone to warping during print and is much

2

more ‘stickier’ than ABS. PLA requires a bit more force to be extruded as it has a highercoefficient of friction than ABS. PLA is a bit more recent in the history of FDM 3D printers andhas a promising future.

ABS is a common thermoplastic. It produces a slight ‘burnt plastic’ smell when extruding.Depending on the specifications and the color, extrusion temperature can vary between 220 and260 degrees Celsius. ABS starts to become malleable (heat deflection point) at around 100 °C(which makes it more heat resistant than PLA). ABS has a lower coefficient of friction than PLAand requires slightly less force to be extruded than PLA. ABS can be considered the “legacy” typeof filament since it was used for 3D printing before PLA.

Filament with a smaller diameter can be heated faster (as it takes less time for the heat to reach thecenter) so you can print faster. Being smaller, it is also more flexible and can be coiled moretightly and turn sharper corners.

3

To purchasing the suitable 3D printing filament, people should know more useful informationabout high quality 3D printing filament. At KoolerBuy(http://www.koolerbuy.com/), people cansave much time to find 3D printing filament they want, this is mainly because Koolertron 3Dprinting filament has been chosen by quite few of people all around the world.