kodak 9000c 3d extraoral imaging system. trophy training center k90003d-c aug.2008 2 introducing the...

KODAK 9000C 3D Extraoral Imaging System

TROPHY TRAINING CENTER K90003D-C Aug.20082

Introducing the newKODAK 9000C

Extraoral Imaging System


Kodak 9000C Panoramic – 3D and Cephalometric Imaging System

The Best Solution to address the needs of general practitioners and orthodontists• One Shot cephalometric imaging

• Unique range of image formats

• Automatic Tracing Module

• Easy and simple to use

• High-end panoramic unit


Kodak 9000C « One Shot » Cephalometric Imaging

First direct digital cephalometric system

Exposure in a single shot

Capture in a fraction of seconds

Reduction of the risk of blurred images

Patient comfort improvement


Kodak 9000C - Unique range of cephalometric formats

Specific Low Dose: 18x18 cm (8 x 8 in.)

Half Skull CHILD: 18x24 cm (8 x 10 in.)

Half Skull ADULT: 24x30 cm

(10 x 12 in.)

Full Skull CHILD: 24x24 cm (10 x 10 in.)

Full Skull ADULT: 30x30 cm (12 x 12 in.)


Kodak 9000C - Variety of cephalometric programs

Lateral

Frontal (AP/PA)

Oblique

Submento-vertex

Carpus


Kodak 9000C Extraoral Imaging System

Two built-in CCD digital sensors:• Panoramic

• Cephalometric

No worries• No additional cost at purchase

• No handling of the sensor

• No risk to damage the sensors

• No loss of time for the operator

PAN

CEPH


Kodak 9000C - Compact « One Shot » Design

New One Shot system with reduced footprints

=> Fits into a 2.23 m-width-room2,23 m (86.6 in)


Kodak 9000C - Unique Automatic Landmark Recognition

Thanks to the Automatic Landmark Recognition application

Allowing…

- time savings for identification of basic landmarks

- instant display of “ready for analysis & diagnosis”images.


Kodak 9000C - Easy integration

The same imaging software is used for all Kodak digital imaging systems

KODAK 8000 / 8000CKODAK 9000C

Digital Panoramic andCephalometric System


Kodak 9000C - Face to face positioning

Direct contact with the patient• Constant control of the situation

• Reinforced patient communication

• The patient is not stressed


Kodak 9000C - Wheel chair access

Standard wheel chairs can access the unit• Exam can be performed on most disable patients


Kodak 9000C - User friendly graphic interface

•Fast learning curve for operators

•Limited risk of making mistakes


Kodak 9000C - Easy control panel

•Just key functions to easily understand and operate the system

•Clear representation

•A display screen provides messages and reminds the current exam settings


Kodak 9000 –

A True High End Panoramic System


Kodak 9000C - Total flexibility

Multiple programs• Standard panoramic

• Segmented panoramic

• Maxillary sinus

• TMJ x2 or x4 LA

Panoramic (adult and child)

Segmented panoramic

TMJ 4 lateral views

TMJ 4 lateral views

Maxillary sinus


Kodak 9000C - Total flexibility

Anatomic programs• Variable focal trough that allows anatomical selection according

to patient morphology

– ‘U’, ‘V’ or Square shape of the jaw

– Large, medium or small size of the jaw

– Incisors tilt standard, inward or outward

Small Medium Large


Kodak 9000C - Easy patient positioning

Two positioning laser beams:• Horizontal for Frankfurt plan

• Vertical for Sagittal plan


Kodak 9000C - Panoramic features – Lateral holders

New lateral holders• More ergonomic

• Keep the head stable

• Invisible in the image


Kodak 9000C –3D

3D benefits


The new Kodak 9000C 3D presentation

We initiate a new era for extra-oral systems:• An affordable 3D solution

• 3D exam now for everyone

• Easy to use everyday

• A true high-end panoramic unit

• The best Ceph technology: One-shot


Kodak 9000 3D - 3 built-in sensors

Kodak 9000C 3D integrates three modalities:• Panoramic

• Cephalometry

• 3D (DVT = Digital Volumetric Tomography)


Kodak 9000 3D - No sensor handling

The system positions automatically the right sensor

There is no risk of dropping the sensor on the floor

Sensors are always “stored” in secured conditions


Kodak 9000 3D - 3D benefits for ortho

Most important concerns where 3D can be more than useful:

• Impacted canines

• Micro-implants

• Wisdom teeth

Other cases where 3D can be used:

• Complicated root case

• Suspicion of endodontic pathology

• Endodontic surgery case

• Post operating checkup


Kodak 9000C 3D – Expanding Care & Expanding Services

Allow you to perform a wider range of diagnoses and treatments in your office.

Reduces multiple visits and rescheduling

Saving of time and money for you and your patients.

Improvement in your care and services.


Kodak 9000 3D - 3D features – Acquisition

Capture 50x37 mm FOV• For fine details (endodontics)

• For viewing enough dental structures (single implants)

• Slice thickness 76 microns


Kodak 9000 3D - 3D features – Positioning of the FOV

The positioning is made easy thanks to the 50mm diameter field of view!

Positioning of the area of interest• Automatic with the virtual arch on the GUI

Vertical alignment check• Pre shoot mode


Kodak 9000 3D - 3D software features

Among hundreds of fancy features directly inherited from medical or industrial scanning applications:• Measurements (segments,

angles)

• Multi planar review

• 3D volume review

• Curved plane slicing and orthogonal views

• Thick slices

Kodak 9000C 3D –

Technical Specifications


KODAK 9000 3D – Unit overview Face to face positioning

Direct contact with the patient• Constant control of the

situation

• Reinforced patient communication

• Reduction of the feeling of entrapment.

• The patient is not stressed


KODAK 9000 3D – Unit overview Main features : Full Ethernet connection

• Fast Ethernet connection for quick and secured image transfer

• Easy installation

• Long distance possible between the unit and the host computer

• Point to Point protocol for optimum safety


KODAK 9000 3D – Unit overview

3D features – Patient positioning

Two positioning laser beams:• Vertical for Sagittal plan

• Sensor height line for vertical centring of the area of interest

In manual mode:• Laser spot that indicates the

centre of the area of interest


KODAK 9000 3D – Unit overview3D volume sides

A

A = AnteriorP = PosteriorL = LeftR = RightH = HeadF = Foot


K9000C 3D -Technical Specifications

Tube voltage 60 - 90 kV (max)

Tube current 2 - 15 mA (max)

Frequency 140 kHz (max)

Tube focal spot 0.5 mm (IEC 336)

Total filtration > 2.5 mm eq. Al

Ceph Modality

Technology One Shot

Sensor technology CCD sensor with optical fiber

Gray scale 16384 - 14 bits

Magnification 1.15

Exposure time 0.1 to 3.2 sec.

Cephalometric exam options

LateralObliqueFrontal (AP / PA)Submento-vertexCarpus

Cephalometric formats

18 X 1818 x 2424 x 2424 x 3030 x 30

Panoramic Modality

Sensor technology CCD Optical fibre sensor

Gray scale 16384 (14 bits)

Magnification 1.27

Exposure time Adult pan. 13.9 sec.Pediatric pan. 13.2 sec.

Programs 12 anatomical settings

Radiological exam options

• Panoramic• Segmented panoramic• Maxillary sinus• LA TMJ x2• LA TMJ x4

Input voltage • 230-240 V - 50/60 Hz• 100-110-130V - 50/60 Hz

Weight 185 kg


K9000C 3D - Technical Specifications

©Carestream Health, Inc., 2007.“Kodak” and the Kodak trade dress are trademarks of Eastman Kodak Company used under license.

kodak 9000c 3d extraoral imaging system. trophy training center k90003d-c aug.2008 2 introducing the...

Documents

c kodak

c panoramic

c face

c variety

c compact

c digital panoramic

c easy integration

cephalometric system