kit de cloro lamotte
TRANSCRIPT
-
8/3/2019 Kit de Cloro LaMotte
1/4
DPD CHLORINE TEST KIT
MODEL LP-1-NMC CODE 6901-NMC
QUANTITY CONTENTS CODE
50 *Chlorine DPD #1R Tablets (*6999A) FMC6905A-6999ABOX
50 Chlorine DPD #3R Tablets (*6905A)
50 *Chlorine DPD #2R Tablets (6904A) FMC6904A-6906ABOX
50 *Chlorine DPD #4 Instrument Grade Tablets(*6906A)
3 Test Tubes, plastic, w/caps 0106
1 Chlorine DPD Comparator, 0.1-1.0 ppm 6978
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for thesereagents see MSDS CD or www.lamotte.com. To obtain a printed copy, contactLamotte by e-mail, phone or fax.
To order individual reagents or test kit components, use the specified codenumber.
USE OF THE OCTET COMPARATOR
The Octet Comparator contains eight permanent color standards. A testsample is inserted into the openings in the top ofthe comparator. The sample can then be
compared to four color standards at once, and thevalue read off the comparator. For optimum colorcomparison, the comparator should be positionedbetween the operator and a light source, so thatthe light enters through the special light-diffusingscreen in the back of the comparator. Avoidviewing the comparator against direct sunlight oran irregularly lighted background.
L Mott
L Mott
-
8/3/2019 Kit de Cloro LaMotte
2/4
PROCEDURE
FREE AVAILABLE CHLORINE1. Rinse the test tube (0106) with sample water. Fill to 10 mL line with
sample water.
2. Add one *Chlorine DPD #1R Tablet (6999A). Cap and mix untiltablet disintegrates.
3. Immediately insert test tube into Chlorine DPD Comparator (6978).Match sample color to a color standard. Record as Reading #1. Donot discard this sample if testing for Monochloramine, Dichloramineor Total Residual Chlorine.
NOTE: Reading should be made within one minute of addingreagent.
Reading #1 = ppm Free Available Chlorine
MONOCHLORAMINE
4. Add one Chlorine DPD #2R Tablet (6904A) to sample from Step 3.Cap and mix until tablet disintegrates.
5. Insert test tube into Chlorine DPD Comparator (6978). Match
sample color to a color standard. Record as Reading #2.Reading #2 - Reading #1 = ppm Monochloramine
DICHLORAMINE AND TOTAL RESIDUAL CHLORINE
6. Add one *Chlorine DPD #3R Tablet (6905A) to sample from Step 5.Cap and mix until tablet disintegrates.
7. Insert test tube into Chlorine DPD Comparator (6978). Matchsample color to a color standard. Record as Reading #3.
Reading #3 - Reading #2 = ppm Dichloramine
Reading #3 = ppm Total Residual Chlorine
-
8/3/2019 Kit de Cloro LaMotte
3/4
TOTAL RESIDUAL CHLORINE AND COMBINED CHLORINE
1. Rinse test tube (0106) with sample water. Fill to 10 mL line withsample water.
2. Add one *Chlorine DPD #1R Tablet (6999A). Cap and mix untiltablet disintegrates.
3. Immediately insert test tube into Chlorine DPD Comparator (6978).Match sample color to a color standard. Record as ppm Free
Available Chlorine.
4. Add one *Chlorine DPD #3R Tablet (6905A). Cap and mix untiltablet disintegrates.
5. Insert test tube into Chlorine DPD Comparator (6978). Matchsample color to a color standard. Record as ppm Total ResidualChlorine.
Combined Chlorine, ppm =Total Residual Chlorine - Free Available Chlorine
TOTAL RESIDUAL CHLORINE
*Chlorine DPD #4 Tablet determines Total Residual Chlorine and is usedwhere a differentiation in the type of chlorine is not required.1. Rinse test tube (0106) with sample water. Fill to 10 mL line with
sample water.
2. Add one *Chlorine DPD #4 Instrument Grade Tablet (6906A). Capand mix until tablet disintegrates.
3. Insert test tube into Chlorine DPD Comparator (6978). Matchsample color to a color standard. Record as ppm Total ResidualChlorine.
-
8/3/2019 Kit de Cloro LaMotte
4/4
LaMOTTE COMPANY
Helping People Solve Analytical Challenges
PO Box 329 Chestertown Maryland 21620 USA
800-344-3100 410-778-3100 (Outside U.S.A.) Fax 410-778-6394Visit us on the web at www.lamotte.com
05.08