killtest cisco 352-001 questions and answers
DESCRIPTION
Killtest Cisco 352-001 questions and answers cover 100% of the exam objectives set by Cisco Certification. Killtest 352-001 test questions are available in popular formats and are easy to use. Killtest Cisco Certified products are prepared by IT professionals and industrious experts who have implemented their real life experience in Cisco 352-001 questions in order to provide candidate with the best 352-001 product available in the market.TRANSCRIPT
Killtest 352-001 Cisco Practice Exam
Cisco Certified Design Expert Qualification Exam
http://www.killtest.com/CCDE/352-001.asp
With the help of Killtest 352-001 Cisco Practice Exam, you are bound to grasp the technical
tasks and knowledge required in the 352-001 product exam and pass the exam to get the Cisco
certificate. Hurry to get the latest version of 352-001 Cisco Practice Exam which was refreshed
as the latest version by our IT experts. Now Killtest guaranteed Cisco 352-001 test is available in
various formats to best suit your needs and learning style.
Killtest NetApp + Juniper Promotion: From July 7 to July 28, Killtest offer 15% discount on
Network Appliance and Juniper Certification Exams. Choose Killtest, enjoy your 15% discount
on your Network Appliance and Juniper Exams at once. Just add your wish exam to the cart,
you can see "use coupon", please fill in "NJ" then you can enjoy 15% discount on your exam.
http://www.killtest.com/
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
1 / 3
Exam : 352-001
Title :
Version : Demo
CCDE™ Written Exam
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
2 / 3
1. Topic 1, Volume A
A company plans to include Nonstop Forwarding and Bidirectional Forwarding Detection as a part of their
network redundancy plan.
In which two ways do NSF and BFD work together when different hardware platforms are compared?
(Choose two.)
A. During supervisor engine or routing engine failover, the NSF feature will always ensure that the BFD at
the peer router will not trigger a link down independent of the used hardware platform.
B. At some hardware platforms, BFD and NSF are not supported together. During supervisor engine or
routing engine failover, the BFD at the peer router will trigger a link down.
C. To ensure that BFD at the peer router will not trigger a link down during NSF, the BFD packets must be
processed fast enough, and, during supervisor engine or routing engine failover, by processing the BFD
independent from the supervisor engine or routing engine.
D. Because BFD is always processed at the line cards (not at the supervisor engine or routing engine), a
supervisor engine or routing engine failover will not affect the BFD peer router.
E. Because BFD is always processed at the supervisor engine or routing engine, a supervisor engine or
routing engine failover will always trigger a link down at the peer router.
Answer: B,C
2.Refer to the exhibit.
A service provider would like to use Ethernet OAM to detect end-to-end connectivity failures between
SP-SW1 and SP-SW2.
In which two of these ways can you design this solution? (Choose two.)
A. Enable Y.1731 Connectivity Fault Management on the SP switches.
B. E-LMI PDUs must be forwarded over VPLS.
C. Cisco Discovery Protocol PDUs must be forwarded over the VPLS.
D. Use upward maintenance endpoints on the SP switches.
E. Enable IEEE 802.1ag Connectivity Fault Management on the SP switches.
Answer: D,E
3.A network design shows two routers directly connected to an Ethernet switch using optical connections.
There is an OSPF adjacency between the routers.
In this design, which solution will ensure that interface down detection is reported as quickly as possible to
the IGP?
A. optimized OSPF SPF timers
B. Bidirectional Forwarding Detection
www.killte
st.co
m
The safer , easier way to help you pass any IT exams.
3 / 3
C. automatic protection switching
D. optimized OSPF LSA timers
E. Ethernet OAM CFM monitoring
Answer: B
4.A network designer is working with a company to improve convergence at the Layer 2 control plane and
decides to use LACP.
Which of these components does LACP use to create the system ID?
A. LACP system priority and switch MAC address
B. LACP port priority and switch MAC address
C. LACP port priority and port number
D. LACP system priority and port number
Answer: A
5.Refer to the exhibit.
You are designing a spanning-tree network for a small campus.
Which two of these options would result in a trouble-free spanning-tree network design? (Choose two.)
A. Convert all ports to trunk ports, prune off the VLANs that you do not require, and minimize the number
of blocking ports.
B. Introduce Layer 3 VLANs (SVIs) and prune off the VLANs that you do not require.
C. Convert all the ports to trunk and enable BackboneFast.
D. Convert all the ports to trunk and enable UplinkFast between all the links.
Answer: A,B
www.killte
st.co
m
www.killtest.com
Killtest Exams Features:
High quality IT exams practice questions and answers
Hot Certifications: IBM, CompTIA, Avaya, Symantec, Oracle, Adobe
One year free update
Verified Answers Researched by Industry Experts and almost correct.
Multiple-choice questions (MCQs) like real exam
At least 96% coverage of real exam
Experts using industry experience to produce precise and logical products
If failed, 100% money back
More Hot Pages from Killtest shared:
Promotion Page:
http://www.killtest.com/promotion.asp
Bundles Page”
http://www.killtest.com/bundles.asp
How To Pay Page:
http://www.killtest.com/howtopay.asp
FAQs Page
http://www.killtest.com/faq.asp
All Certifications Exams:
IBM CompTIA ISEB SCO Avaya Symantec Checkpoint
CIW EXIN EC-COUNCIL Juniper Network Appliance
Oracle VMware EMC LPI Novell Nortel Hitachi
Adobe OMG
www.killtest.com