kennedy

1

Proudly Serving America Since 1911100 years, that’s how long Kennedy has been building the industry’s most dependable tool storage units. It was in 1909, that Howard Kennedy, an engineer with the Pennsylvania Railroad, became an innovator born from need. Due to the rigors of the railroad, the standard fabric cloth tool holders were not protecting his gear. From his garage in Fort Wayne, Indiana, Howard designed and built a metal suitcase for himself, which was then being requested by the other engineers who worked for the rail lines. Howard’s brother Charles, at that time an advertising executive with J. Walter Thompson Company in Chicago, noticed the value in Howard’s creation of suitcases. It was at that time that the brothers began discussing the business potential for Howard’s new all metal suitcase. It was in 1911 that Kennedy Manufacturing Company was formally established, with Charles acting as its Secretary/Treasurer and General Manager, while Howard ran the factory in Fort Wayne, IN. Together, they designed and manufactured the first metal mechanics box and metal tackle box for Kennedy. In 1914, at the urging of a group of local businessmen from Van Wert, Ohio, the factory was relocated from Howard’s garage in Fort Wayne, to a building, ironically located beside the Pennsylvania Rail Road tracks in Van Wert. From this move, a vision was formed, concentrated on improving the mechanics chest and tackle boxes and designing a variety of different metal products; lunch boxes, electricians kits, machinists chests, car luggage carrier, utility shelves, roller dolly and roller cabinets. What started as a need for durability evolved into 100 years of commitment to building the highest quality American made products possible. During the past 100 years, our products have stood beside the American worker through the great depression, several recessions, prohibition, two world wars, a missile crisis, lunar landings, the building of a wall, the fall of the wall, September 11th, and the first and last shuttle launch. In that time, our commitment to our customers, community and employees has never wavered.

We take great pride in the fact that Kennedy branded products are still to this day being manufactured in Van Wert, Ohio, with many second and third generation craftsman. We recognize that without your loyalty to the Kennedy product line, we would not be celebrating this tremendous milestone. We thank you for choosing to purchase our product and strive to continue to provide you, our customer, with finest quality tool storage solutions at competitive prices.

QUALITYDesign, construction and fabrication

methods with functionality and ease of use.

SECURITYHigh-security locks and internal locking

mechanism.

FLEXIBILITYModular and interchangeable drawers

and slides for re-configurations.

DURABILITYLong life and endurance in harsh environments and work abuse.

TABLE OF CONTENTSABOUT KENNEDY .....................................................................................................................1

ONLINE CONFIGURATOR SYSTEM .....................................................................................2

BENCHMARK® SERIES .......................................................................................................... 3-5

MAINTENANCE PRO™ SERIES .......................................................................................... 6-9

INDUSTRIAL SERIES ......................................................................................................... 10-14

PRO-LINE™ SERIES MAINTENANCE CARTS ............................................................. 15-16

MECHANICS' & MACHINISTS’ CHESTS ...................................................................... 17-19

HAND CARRY TOOL BOXES ............................................................................................... 20

VERSA-BENCHES® ............................................................................................................ 21-23

HEAVY-DUTY WORK STATIONS ........................................................................................ 24

STEEL TOOLBOARD SYSTEMS ...................................................................................... 25-29

STAINLESS STEEL ROLLER CABINETS .............................................................................. 30

MODULAR CABINETS ..................................................................................................... 31-38

MODULAR WORK STATIONS ............................................................................................. 39

HMS™ SERIES MODULAR CABINETS ............................................................................... 40

MOBILE MODULAR CABINETS .......................................................................................... 41

MODULAR CABINET ACCESSORIES ........................................................................... 42-43

NC/CNC PRODUCTS ....................................................................................................... 44-45

INDEX ......................................................................................................................................... 46

Conventional Storage Kennedy Cabinets

Conventional Storage

68 Sections of Conventional Shelving with 38 opening/Section = 2,584 compartments.

AVERAGE RETRIEVAL TIME PER ITEM = 3-4 MINUTES

V.S.

Kennedy Cabinets

16 Kennedy Cabinets with 748 drawers, 172 compartments = 2,752 compartments.

AVERAGE RETRIEVAL TIME PER ITEM = 1 MINUTE

24 ft.

Issue Desk

720 Sq.Ft.

30 ft.

24 ft.

70% or 504 sq. ft. regained

Issue Desk

216 Sq.Ft.4 ft. 9ft.

THE KENNEDY CONFIGURATORDesign and Build Your Custom Kennedy Modular Cabinet

Visit our website at www.kennedymfg.com

Kennedy modular cabinets are custom-designed around the specific needs of your operation. Kennedy’s web configurator allows you to quickly choose and configure your drawer arrangements, select drawer divider options for each individual drawer, and select accessories and color combinations for your cabinet, even for each individual drawer.

Easy NavigationThe configurator makes customizing your modular cabinets easy!• Product Selection• Drawer Sizes• Drawer Dividers• Color combinations down to individual drawers!

Customization• Kennedy’s web product configurator is flexible• Provides 9 colors in any drawer/body combination• Change drawer heights in the field for future needs

2

Kennedy High-Density Modular CabinetsKennedy modular cabinets and products provide specific benefits across a wide range of industrial and commercial applica-tions. Key application benefits are higher productivity, storage maximization, security and safety.

Our modular products provide a high-density solution to making your storage space perform any time your operations in-volve the storing and retrieval of tools, parts or supplies by specialized technicians or personnel.

These modular cabinets are custom-designed around the specific needs of your operation. Kennedy’s web configurator allows you to quickly choose and configure your drawer arrangements, select drawer divider options for each individual drawer, and select accessories and color combinations for your cabinet, even for each individual drawer.

3 1.800.413.8665

Product Features:

METAL THICKNESSFrameDrawersExtra Wide Drawers

16 ga18 ga14 ga

Gas-Shock Lid Stays

Smooth Operating Ball-Bearing Drawer Slides Hold Up to 120 lbs Each. Extra Wide Drawers Hold Up to 420 lbs Each.

High Security Tubular Locking System

Heavy-Duty 6” x 2” Roller Bearing Casters with 900 lb Capacity Per Caster

Full-Width, Extruded Aluminum Drawer Pulls w/ Black Plastic Endcaps & Coated MDF Work Surface on Roller Cabinets.

Aluminum Corner Trim Protects Against Nicks and Scrapes

Soft Rubber Ergonomic Push Handle

Pictured: 60” Benchmark 7 Drawer Top Chest & 11 Drawer Roller Cabinet Combo in Classic Blue

The ultimate in tool storage for the mechanic, the Benchmark Series has everything you want and more. From the safety of gas shock lid stays to rugged, heavy-duty casters, Benchmark is job ready. Made in the USA, you’ll get Kennedy quality that will last a lifetime. Extra wide drawers can hold up to 420 lbs. Large bank drawers on all 53” and 60” also have 220 lb slides.

Customize the color of your products. Simply place one of the abbreviations at the end of the model number.

Extra lead time required.

www.kennedymfg.com 4

60” BENCHMARK SERIES• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters• Metal Thickness: Body - 16 ga., Drawers - 18 ga., X-Wide Drawers - 14 ga.


60000___60101___60121___

60”60”60”

7-Drawer Top ChestTop Canopy11-Drawer Cabinet

24”24”24”

20 1/2”22 3/4”44 1/2”

280 lbs.90 lbs.460 lbs.

355 lbs.165 lbs.485 lbs.

18,853 cu. in.24,500 cu. in.30,094 cu. in.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

NET WT

NET WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

53000___53101___53001___

53”53”53”


24”24”24”

20 1/2”22 3/4”44 1/2”

260 lbs.85 lbs.460 lbs.

335 lbs.160 lbs.485 lbs.

16,494 cu. in.21,250 cu. in.26,815 cu. in.

11-DR CABINET

11-DR CABINET

7-DR CHEST

7-DR CHEST

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITYTop TIll:SmAll BANk:

lARgE BANk:

60”12 7/8”12 7/8”38 7/8”

23”22 3/8”22 3/8”22 3/8”

4 3/8”2”4”4”

-120 lbs.120 lbs.220 lbs.

-223

Top TIll:SmAll BANk:

lARgE BANk:

53”12 7/8”12 7/8”31 7/8”

23”22 3/8”22 3/8”22 3/8”

4 3/8”2”4”4”

-120 lbs.120 lbs.220 lbs.

-223

Top DRAwER:SmAll BANk:

lARgE BANk:

54 3/8”12 7/8”12 7/8”12 7/8”38 7/8”38 7/8”

22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”

5”2”4”6”4”10”

440 lbs.120 lbs.120 lbs.120 lbs.220 lbs.220 lbs.

123131


lARgE BANk:

47 3/8”12 7/8”12 7/8”12 7/8”31 7/8”31 7/8”

22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”

5”2”4”6”4”10”


123131

5

BENCHMARK SERIES FULL-HEIGHT SIDE LOCKER• Reversible - Hangs on Either Side of Roller Cabinets• Includes 3 Drawers, w/Ball-Bearing Slides and 1 Stationary, Adjustable Shelf• Fits Any 24” Deep Benchmark Cabinet or Combo• Metal Thickness: Body - 16 ga. Drawers - 18 ga.

BENCHMARK SERIES 6-DRAWER SIDE CABINET• Fits Any 24” Deep Benchmark Series Roller Cabinet• Reversible - Hangs on Either Side of Roller Cabinets• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Metal Thickness: Body - 16 ga. Drawers - 18 ga.• Includes MDF Work Surface

20200___ 21”6-Drawer Side Cabinet 24” 35 3/4” 170 lbs. 220 lbs. 7,622 cu. in.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

NET WT

NET WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

40200___ 26 3/8”3-Drawer Side Locker 24” 62” 160 lbs. 200 lbs. 27,000 cu. in.

3-DR loCkER

moDEl: 20200

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYDRAwERS: 15”

15”15”15”15”

22 1/2”22 1/2”22 1/2”22 1/2”22 1/2”

6”2”4”6”8”

120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.

12111

DRAwERS:SHElf:

19 1/2”19 1/2”

22 1/2”22 1/2”

4”1”

120 lbs.120 lbs.

31

MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT CAPACITY46000___46101___46003___

46”46”46”


24”24”24”

20 1/2”22 3/4”42 5/8”

210 lbs.125 lbs.425 lbs.

230 lbs.130 lbs.450 lbs.

13,835 cu. in.18,000 cu. in.22,072 cu. in.


11-DR CABINET

8-DR CHEST

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYTop TIll:SmAll BANk:

lARgE BANk:

46”12 7/8”12 7/8”24 7/8”24 7/8”

23”22 3/8”22 3/8”22 3/8”22 3/8”

4 3/8”2”4”2”4”

-120 lbs.120 lbs.120 lbs.120 lbs.

-2222


lARgE BANk:

121111211

40 3/8”12 7/8”12 7/8”12 7/8”12 7/8”24 7/8”24 7/8”24 7/8”24 7/8”

22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”22 3/8”

5”2”4”6”8”2”4”6”8”

440 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.

6

Product Features:

METAL THICKNESSFrameDrawers53” Model Drawers

16 ga18 ga20 ga

Pictured: 53” Maintenance Pro Series Top Canopy & 12-Drawer Roller Cabinet Combo in Yellow

Specially designed for the maintenance professional, Maintenance ProTM brings a wide variety of products to your shop.



Tubular Steel Side Handles

Coated MDF Work Surface

Gas-Shock Lid Stays In Top Chests & Canopies

Smooth Operating Ball-Bearing Drawer Slides Hold Up to 120 lbs Per Drawer


Rugged 6” x 2” Roller Bearing Casters with 900 lb Capacity/Caster

Full-Width, Extruded Aluminum Drawer Pulls

7 1.800.413.8665

53” MAINTENANCE PRO SERIES• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters• Metal Thickness: Body - 16 ga. Drawers - 20 ga.

5302MP___5350MP___5300MP___

53”53”53”

8-Drawer Top ChestTop Canopy12-Drawer Cart

18”18”18”

18 1/2”20”41 3/4”

155 lbs.75 lbs.335 lbs.

185 lbs.85 lbs.365 lbs.

12,060 cu. in.17,780 cu. in.19,992 cu. in.

MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT CAPACITY

12-DR CART

8-DR CHEST

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYTop TIll:DRAwERS:

53 1/4”23”23”

17 7/8”16 1/2”16 1/2”

2 1/2”2”4”

-120 lbs.120 lbs.

-44

Top DRAwER:lEfT BANk:

RIgHT BANk:

49”23”23”23”23”23”23”

16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”

3 5/8”2”4”6”2”4”10”

120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.120 lbs.

1231221


4202MP___4200MP___

41 1/4”41 1/4”

7-Drawer Top Chest12-Drawer Cart

20”20”

21 1/2”42”

125 lbs.250 lbs.

155 lbs.280 lbs.

11,617 cu. in.16,686 cu. in.


12-DR CART

7-DR CHEST

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYTop TIll:lEfT BANk:

RIgHT BANk:

BoTTom DRAwER:

41 1/4”25 1/4”25 1/4”9 3/4”9 3/4”37 1/4”

19 3/4”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

4 3/4”2”4”2”4”5”


-21211


RIgHT BANk:

37 1/4”23”23”23”9 3/4”9 3/4”9 3/4”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

5”2”4”6”2”4”10”


1231221


3400MP___3412MP___3407MP___

34”34”34”

5-Drawer Top Chest12-Drawer Top Chest7-Drawer Cabinet

20”20”20”

18 3/8”20 7/8”40 1/8”

146 lbs.181 lbs.209 lbs.

156 lbs.196 lbs.231 lbs.

8,225 cu. in.8,331 cu. in.14,517 cu. in.


moDEl: 3400mp DRS. WIDTH DEPTH HEIGHT CAPACITYTop TIll:DRAwERS:

33 3/4”30”30”

19 1/2”18 1/2”18 1/2”

3 5/8”2”4”

120 lbs.120 lbs.120 lbs.

-41


33 7/8”9 3/16”30”30”

19 3/4”18”18”18”

2 5/8”2”2”4”

120 lbs.120 lbs.120 lbs.120 lbs.

-921

moDEl: 3407mp DRS. WIDTH DEPTH HEIGHT CAPACITYDRAwERS: 30”

30”30”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

331

6-Drawer Side Cabinet 2-Shelf Side Cabinet


DEPTH HEIGHT NET WT SHIP WT CAPACITY

29” MAINTENANCE PRO SERIES

58” MP SERIES MAINTENANCE CART

• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters• Metal Thickness: Body - 16 ga. Drawers - 18 ga.

• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters & Two 10” Ball-Bearing Rubber Wheels• Metal Thickness: Body - 16 ga. Drawers - 18 ga.

2905MP___2912MP___2907MP___

29”29”29”

5-Drawer Top Chest12-Drawer Top Chest7-Drawer Cabinet

20”20”20”

18 3/8”20 7/8”40 1/8”

105 lbs.166 lbs.198 lbs.

114 lbs.181 lbs.215 lbs.

7,077 cu. in.7,326 cu. in.12,122 cu. in.

MASTER No. ITEM DESCRIPTION WIDTH

DEPTH HEIGHT NET WT SHIP WT CAPACITY

HEIGHT CAPACITY

5804MP___ 57 1/4”12-Drawer Cart 20” 43 1/2” 388 lbs. 475 lbs.. 23,934 cu. in.MASTER No. ITEM DESCRIPTION WIDTH

12-DR CART DRS. WIDTH DEPTHTop DRAwER:lEfT BANk:

RIgHT BANk:

52 3/4”25”25”25”25”25”25”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

6”2”4”6”2”4”10”


1231221

MAINTENANCE PRO SERIES SIDE ATTACHMENTS• Reversible - Hangs on Either Side of MP Cabinets/Carts• Models 382MP & 306MP Have 6 Drawers, w/Ball-Bearing Slides• Models 380MP & 300MP Have 2 Adjustable Shelves, w/Ball-Bearing Slides• Metal Thickness: Body - 16 ga. Drawers - 18 ga.• Model382MPisCompatiblewith53”MPCabinets/Carts• Model306MPisCompatiblewith29”,34”,39”,42”&52”MPCabinets/Carts• Model380MPisCompatiblewith53”MPCabinets/Carts• Model300MPisCompatiblewith29”,34”,39”,42”&52”MPCabinets/Carts

moDEl: 306mp

moDEl: 382mp

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYDRAwERS: 9 3/4”

9 3/4”9 3/4”

16 1/2”16 1/2”16 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

141

DRAwERS: 9 3/4”9 3/4”9 3/4”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

141

382MP___306MP___380MP___300MP___

13 5/8”13 5/8”13 5/8”13 5/8”

6-Drawer Side Cabinet6-Drawer Side Cabinet2-Shelf Side Locker2-Shelf Side Locker

18”20”18”20”

33 1/8”33 1/8”33 1/8”33 1/8”

89 lbs.94 lbs.53 lbs.56 lbs.


4,231 cu. in.4,742 cu. in.6,300 cu. in.7,000 cu. in.


moDEl: 300mp

moDEl: 380mp

No.

No.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITYSHElvES: 9 3/4” 16 1/2” 2” 120 lbs.2

SHElvES: 9 3/4” 18 1/2” 2” 120 lbs.1


28 7/8”7 9/16”25”25”

19 3/4”18 1/2”18 1/2”18 1/2”

2 5/8”2”2”4”

120 lbs.120 lbs.120 lbs.120 lbs.

-921


28 13/16”25 1/16”25 1/16”

19 3/4”18 1/2”18 1/2”

3 11/16”2”4”

120 lbs.120 lbs.120 lbs.

-41


25”25”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

331

12-Drawer Chest&

7-Drawer Cabinet Combo

5-Drawer Top Chest

9



• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters & Two 10” Ball-Bearing Rubber Wheels• Metal Thickness: Body - 16 ga. Drawers - 18 ga.

• Ball-Bearing Drawer Slides That Move Easily Under Heavy Drawer Loads• Heavy Duty, Non-Slip Drawer Liners & Full-Width Aluminum Drawer Pulls • Large 6” x 2” Roller Bearing Heavy Duty Casters• Top Chest Compartment Has Removable Partial Shelf• Canopy Features Gas Struts & 10pc Assorted Hook Set• Metal Thickness: Body - 16 ga. Drawers - 18 ga.

4405MP___4400MP___

43 3/4”43 3/4”

5-Drawer Top Chest10-Drawer Cart

20”20”

16 1/2”37 3/4”

123 lbs.316 lbs.

137 lbs.331 lbs.

9,723 cu. in.14,305 cu. in.


DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY


RIgHT BANk:

39 1/2”12”12”25”25”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

6”4”10”2”4”


13123

DRAwERS:

CompARTmENT:

25”35”15 1/2”

18 1/2”18 1/2”19 3/8”

2”4”15 3/8”

120 lbs.120 lbs.120 lbs.

41-

39100MP___3905MP___3912MP___3900MP___

39”39 1/4”39 1/4”39 3/8”

Top Canopy5-Drawer Chest12-Drawer Chest8-Drawer Cart

18”20”20”20”

21”18 3/8”20 7/8”42”

69 lbs.130 lbs.193 lbs.225 lbs.

74 lbs.140 lbs.203 lbs.250 lbs.

-9,857 cu. in.10,313 cu. in.17,378 cu. in.



39 1/16”39 3/8”39 3/8”

19 3/4”18 1/2”18 1/2”

3 5/8”2”4”

120 lbs.120 lbs.120 lbs.

-41


39 1/16”11”39 3/8”39 3/8”

19 3/4”18 1/2”18 1/2”18 1/2”

3 5/8”2”2”4”

120 lbs.120 lbs.120 lbs.120 lbs.

-921


35”35”

18 1/2”18 1/2”18 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

341

moDEl: 4405mp

moDEl: 4400mp

12-Drawer Chest/8-Drawer Cabinet Combo

Top Canopy/8-Drawer Cabinet Combo

5-Drawer Top Chest

10

THE

INDUSTRIAL S E R I E S

Product Features:

METAL THICKNESSFrameDrawers

18 ga20 gaCustomize the color of your products. Simply place one

of the abbreviations at the end of the model number.Extra lead time required.


Heavy-Duty 5” Casters On All Models

Choose Between Standard Friction Slides or Smooth Operating Ball-Bearing Drawer Slides That Hold Up to 120 lbs Per Drawer


Extruded Aluminum Drawer Pulls

• 27” Wide roller cabinets accommodate 27” wide or smaller top chests and chest bases.• 29” Wide roller cabinets accommodate 29” wide or smaller top chests and chest bases.

21041 ROLLER CABINET COMBINATION LOCK

21042 ROLLER CABINET ELECTRONIC PUSH BUTTON LOCK

The mechanical combination lock offers quick and easy access. No need to worry about lost or missing keys. In the event the combination is changed or forgotten, an emergency key override is included.

The electronic push button lock can store up to five user access codes simultaneously with a multitude of code sequences available. This lock is powered by a battery pack that services over 3,500 openings of the cart. A low-battery warning light indicates when the power supply is down to 1,500 openings.

5-Drawer Top Chest

11 1.800.413.8665

27” 3-DRAWER INDUSTRIAL ROLLER CABINET

27” & 29” 5-DRAWER INDUSTRIAL ROLLER CABINETS

• 5” x 1 1/4” Roller Bearing Casters Hold Up to 200 lbs. Each• Swing-Down Panel Conceals and Secures Spacious Storage Compartment• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model273-FeaturesFrictionSlides• Model273X-FeaturesBall-BearingSlides

273/273X___ 27”3-Drawer Cabinet 18” 35” 99/102 lbs. 110/113 lbs. 8,235 cu. in.

376X___ 27”6-Drawer Cabinet 18” 39” 137 lbs. 148 lbs. 9,426 cu. in.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

NET WT

NET WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

3-DR CABINET

6-DR CABINET

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY

DRAwERS:

CompARTmENT:

23”23”24 1/8”

16 1/2”16 1/2”17 3/4”

4”6”11 1/4”

120 lbs.120 lbs.120 lbs.

21-

DRAwERS:

CompARTmENT:

23”23”24 1/8”

16 1/2”16 1/2”17 3/4”

2”4”11 1/4”

120 lbs.120 lbs.120 lbs.

33-


27” & 29” 7-DRAWER INDUSTRIAL ROLLER CABINETS

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Swing-Down Panel Conceals and Secures Spacious Storage Compartment• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model376X-FeaturesBall-BearingSlides

• 5” x 1 1/4” Roller Bearing Casters Hold Up to 200 lbs. Each• Model275-FeaturesFrictionSlides• Model275X-FeaturesBall-BearingSlides

• 5” x 1 1/4” Roller Bearing Casters Hold Up to 200 lbs. Each• Model277-FeaturesFrictionSlides• Model277X-FeaturesBall-BearingSlides

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Model295-FeaturesFrictionSlides• Model295X-FeaturesBall-BearingSlides

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Model297-FeaturesFrictionSlides• Model297X-FeaturesBall-BearingSlides

29” CABINET

29” CABINET

27” CABINET

27” CABINET

27” RollER CABINET




Metal Thickness: Body - 18 ga. Drawers - 20 ga.

Metal Thickness: Body - 18 ga. Drawers - 20 ga.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS:

CompARTmENT:

25”25”26 1/8”

18 1/2”18 1/2”19 3/4”

2”4”11 1/4”

120 lbs.120 lbs.120 lbs.

32-

DRAwERS: 25”25”25”

18 1/2”18 1/2”18 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

331

DRAwERS:

CompARTmENT:

23”23”24 1/8”

16 1/2”16 1/2”17 3/4”

4”6”11 1/4”

120 lbs.120 lbs.120 lbs.

32-

DRAwERS: 23”23”23”

16 1/2”16 1/2”16 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

331

277/277X___297/297X___

27”29”

7-Drawer Cabinet7-Drawer Cabinet

18”20”

35”35”

127/134 lbs.146/153 lbs.

138/145 lbs.158/165 lbs.

8,404 cu. in.10,235 cu. in.


275/275X___295/295X___

27”29”


18”20”

35”35”

110/115 lbs.128/133 lbs.

121/126 lbs.140/145 lbs.

8,003 cu. in.9,720 cu. in.


Swing-DownPanelOpen

• Swing-Down Panels Conceal and Secure Spacious Storage Compartments


• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Holds a Variety of Tools at Work Station Height• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model378X-FeaturesBall-BearingSlides

• Folds Flat When Not In Use• Raised Sides Keep Tools From Falling Off• Fits Any Industrial, Maintenance Pro, or Pro Line Roller Cabinet • Weight Capacity: 40 lbs.

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Holds a Variety of Tools at Work Station Height• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model348X-FeaturesBall-BearingSlides

• 5” x 1 1/4” Roller Bearing Casters Hold Up to 200 lbs. Each• Ball-Bearing Drawer Slides and Tubular Push Handle Included• Small in Size, But Big on Security!• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model21040-FeaturesHigh-SecurityTubularLockingSystem• Model21041-FeaturesCombinationPushButtonLockingSystem• Model21042-FeaturesElectronicPushButtonLockingSystem

• LockingDoor & 2 Adjustable Pull-Out Shelves with Ball-Bearing Slides.• Hangs on Either Side of Your Roller Cabinet.• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model182X-FitsModels273(X),275(X),277(X),310(X),&10491• Model202X-FitsModels295(X),297(X),4410,&4400MP• Model382X-FitsModels376X,378X,315X,10492,&10493• Model302X-FitsModels348X,10495,&10494



21040/41/42___ 20 1/2”4-Drawer Cabinet 18” 34” 103 lbs. 133 lbs. 5,950 cu. in.

182X___202X___382X___302X___

13 5/8”13 5/8”13 5/8”13 5/8”

2-Shelf Locker2-Shelf Locker2-Shelf Locker2-Shelf Locker

18”20”18”20”

29”29”33 1/8”33 1/8”




MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DS1___ 20 1/8”Cabinet Shelf 17 1/4” 1” 10.5 lbs. 11 lbs. 343 sq. in.MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT CAPACITY

8-DR CABINET

8-DR CABINET

4-DR CABINET

2-SHElf loCkERS

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 23”23”23”

16 1/2”16 1/2”16 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

341

DRAwERS: 30”30”30”

18 1/2”18 1/2”18 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

341

DRAwERS: 16 1/2”16 1/2”16 1/2”

16 1/2”16 1/2”16 1/2”

3”6 1/4”9 1/2”

120 lbs.120 lbs.120 lbs.

211

SHElvES: 9 3/4” 16 1/2” 2” 120 lbs.2


INDUSTRIAL SERIES FOLD-AWAY CABINET SHELF



INDUSTRIAL SERIES 2-SHELF SIDE LOCKERS

Shelf“Closed” Shelf“Open”

415/415X___435/435X___

41 1/8”43 1/8”


18 3/8”20 1/4”

36 1/4”36 1/4”

102/107 lbs.118/123 lbs.

112/117 lbs.131/136 lbs.

3,634 cu. in.4,073 cu. in.


415/415X

435/435X

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY

DRAwERS: 9 3/4”9 3/4” 9 3/4”

16 1/2”16 1/2”16 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

131

DRAwERS: 9 3/4”9 3/4” 9 3/4”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

131

13

INDUSTRIAL SERIES 5-DRAWER SIDE CABINETS

INDUSTRIAL SERIES 6-DRAWER SIDE CABINETS

VERSA-CART® 5-DRAWER TOOL CARTS

185/185X___205/205X___

13 5/8”13 5/8”


18”20”

29”29”

67/72 lbs.99/102 lbs.

71/76 lbs.99/102 lbs.

3,634 cu. in.4,073 cu. in.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

NET WT

NET WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

185/185X

moDEl: 386X

205/205X

moDEl: 306X

• Model185-FeaturesFrictionSlides• Model185X-FeaturesBall-BearingSlides• Fits Models 273(X), 275(X), 277(X), 310X, & 10491

• Hangs on Either Side of Your Rolling Cabinet• Ball-Bearing Drawer Slides in Every Drawer• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model386X-FitsModels376X,378X,10492,10493,&315X• Model306X-FitsModels348X,2907X,3407X,10494,&10495

• 1,000 lbs. Capacity, Supported by 10” Ball-Bearing Wheels & Heavy-Duty 5” x 2” Casters• Includes Deck of 16 ga. Steel with 1 1/2” High Sides, Tubular Side Handle, & Hardware• Use With Any 27”W x 35”H Cabinet. Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model415-Includes 410 Platform and 185 5-Drawer Cabinet with Friction Slides• Model415X-Includes 410 Platform and 185X 5-Drawer Cabinet with Ball-Bearing Slides• Model435-Includes 430 Platform and 205 5-Drawer Cabinet with Friction Slides• Model435X-Includes 430 Platform and 205X 5-Drawer Cabinet with Ball-Bearing Slides

• Model205-FeaturesFrictionSlides• Model205X-FeaturesBall-BearingSlides• Fits Models 295(X), 297(X), 4410, & 4400MP

18” DEEp SIDE CABINET

20” DEEp SIDE CABINET

Hangs on Either Side of Your Rolling CabinetMetal Thickness: Body - 18 ga. Drawers - 20 ga.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 9 3/4”9 3/4” 9 3/4”

16 1/2”16 1/2”16 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

131

DRAwERS: 9 3/4”9 3/4” 9 3/4”

16 1/2”16 1/2”16 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

141

DRAwERS: 9 3/4”9 3/4” 9 3/4”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

131

DRAwERS: 9 3/4”9 3/4” 9 3/4”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

141

386X___306X___

13 5/8”13 5/8”


18”20”

33 1/8”33 1/8”

4,231 cu. in.4,742 cu. in.

94 lbs.100 lbs.

89 lbs.94 lbs.

Create your own Versa-Cart® Tool Cart!

410R or 430R 185R or 205R 277R or 297R 415R/277R less casters or 435R/297R

+ =+

��

��

Maximum Stability Maximum Maneuverability

Create your own wheel and caster arrangement.

14

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• High Security Tubular Locking System• Tubular Push Handle Included• Metal Thickness: Body - 18 ga. Drawers - 20 ga.

• Fits Models 310X & 315X & Pro-LineTM Maintenance Carts• High-Security Tubular Locking System• Includes Heavy-Duty, Plated Lift Handles• Full-Width Aluminum Drawer Pulls• Ball-Bearing Drawer Slides in Every Drawer• Compartment Has Removable Partial Shelf and Locking Door• Metal Thickness: Body - 18 ga. Drawers - 20 ga.

• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• High Security Tubular Locking System• Tubular Push Handle Included• Metal Thickness: Body - 18 ga. Drawers - 20 ga.

310X___ 39 3/8”10-Drawer Cart 18” 35” 180 lbs. 210 lbs. 11,551 cu. in.

305X___ 39 3/8”5-Drawer Chest 18” 16 1/2” 93 lbs. 102 lbs. 7,707 cu. in.

315X___ 39 3/8”15-Drawer Cart 18” 39” 230 lbs. 260 lbs. 13,054 cu. in.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

10-DR CART

5-DR CHEST

15-DR CART

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 23”23”9 5/8”9 5/8”

16 1/2”16 1/2”16 1/2”16 1/2”

4”6”4”6”

120 lbs.120 lbs.120 lbs.120 lbs.

3232

DRAwERS:

CompARTmENT:

23”23”13 1/2”

16 1/2”16 1/2”17 3/4”

2”4”13 1/4”

120 lbs.120 lbs.120 lbs.

41-

DRAwERS: 23”23”23”9 5/8”9 5/8”9 5/8”

16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”

2”4”6”2”4”12”


531231

INDUSTRIAL SERIES 10-DRAWER MAINTENANCE CART

INDUSTRIAL SERIES 5-DRAWER MAINTENANCE CHEST

INDUSTRIAL SERIES 15-DRAWER MAINTENANCE CART

• High-Security Tubular Locking System• Ball-Bearing Drawer Slides For Smooth Operation• Lockable Compartment in Top Chest with Removable Partial Shelf• Tubular Push Handle Included with Roller Cabinet• Large 6” x 2” Roller Bearing Heavy Duty Casters & Two 10” Ball-Bearing Rubber Wheels• Metal Thickness: Body - 18 ga. Drawers - 20 ga.


5-DR CHEST

10-DR CABINET

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY

DRAwERS:

CompARTmENT:

25”25”15 1/2”

18 1/2”18 1/2”19 3/8”

2”4”15 3/8”

120 lbs.120 lbs.120 lbs.

41-

DRAwERS: 39 1/2”25”25”12”12”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

6”2”4”2”10”


12331

4405___4410___

43 3/4”43 3/4”

5-Drawer Chest10-Drawer Cabinet

20”20”

16 1/2”37 3/4”

9,723 cu. in.14,305 cu. in.

137 lbs.316 lbs.

123 lbs.301 lbs.

44” INDUSTRIAL SERIES

Product Features:


18 ga20 gaPro-Line Series Maintenance Carts come Standard in black powdercoat paint finish: Simply

place ‘BK’ at the end of the model number. Additional colors require extra lead time.


Rugged Roller Bearing Casters Carry Heavy Loads

Smooth Operating Ball-Bearing Drawer Slides Hold Up to 120 lbs Per Drawer


Full-Width, Aluminum Drawer Pulls

MDF Work Surface

15 1.800.413.8665

"Built to Work"—"Built to Last"

39” PRO-LINE TM SERIES TOP CANOPY

PRO-LINE TM SERIES 7-DRAWER MAINTENANCE CART

PRO-LINE TM SERIES 12-DRAWER MAINTENANCE CARTS

PRO-LINE TM SERIES 13-DRAWER MAINTENANCE CARTS

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

7-DR CART

moDEl: 10493

moDEl: 10492

moDEl: 10494

moDEl: 10495

• Storage Compartment with MDF Shelf & Work Surface• Ball-Bearing Drawer Slides in Every Drawer• High Security Tubular Locking System• 5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Metal Thickness: Body - 18 ga. Drawers - 20 ga.

• MDF Work Surface & Wide Top Drawer for Added Storage• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model10493-5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Model10495-6” x 2” Roller Bearing Casters Hold Up to 700 lbs. Each

• MDF Work Surface Included on Both Models• Metal Thickness: Body - 18 ga. Drawers - 20 ga.• Model10492-5” x 2” Roller Bearing Casters Hold Up to 350 lbs. Each• Model10494-6” x 2” Roller Bearing Casters Hold Up to 700 lbs. Each

• Fits 39” Wide Pro-LineTM Models• Gas Shock Lid Stays• MDF Work Surface Included• Includes 10-pc Toolholder Set #99851• Metal Thickness: Body - 18 ga. Drawers - 20 ga.

DRS.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS:

CompARTmENT:

23”23”23”10 3/4”

16 1/2”16 1/2”16 1/2”18”

2”4”6”28”

120 lbs.120 lbs.120 lbs.120 lbs.

331-

DRAwERS: 35 3/4”23”23”23”9 3/4”9 3/4”9 3/4”

16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”

6”2”4”6”2”4”10”


1231221

DRAwERS: 23”23”23”9 3/4”9 3/4”9 3/4”

16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”16 1/2”

2”4”6”2”4”10”


151141

DRAwERS: 37 3/4”25”25”25”9 3/4”9 3/4”9 3/4”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

6”2”4”6”2”4”10”


1231221

10490___ 39”39” Top Canopy 18” 20” 12,200 cu. in.74 lbs.69 lbs.

10491___ 39 3/8”7-Drawer Cart 18” 35 1/8” 13,865 cu. in.205 lbs.175 lbs.

10493___10495___

39 3/8”41 3/8”

12-Drawer Cart12-Drawer Cart

18”20”

39 1/8”42”

13,365 cu. in.16,686 cu. in.

255 lbs.280 lbs.

225 lbs.250 lbs.

10492___10494___

39 3/8”41 3/8”

13-Drawer Cart13-Drawer Cart

18”20”

39 1/8”42”

13,315 cu. in.16,868 cu. in.

250 lbs.275 lbs.

220 lbs.245 lbs.


DRAwERS: 25”25”25”9 3/4”9 3/4”9 3/4”

18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”18 1/2”

2”4”6”2”4”10”


151141

Mechanics’ Chest & BaseProduct Features:

Machinists’ Chest & BaseSpecial Product Features:


20 ga22 gaAll Mechanics’ Chests & Bases come Standard in

brown wrinkle or red powdercoat paint finish.All Machinists’ Chests & Bases come Standard

in brown wrinkle powdercoat paint finish.

High Security Tubular Locking System With Two Keys

Two-Piece, Welded Friction Drawer Slides Add Strength & Hold up to 50 lbs. Per Drawer

Heavy-Duty, Plated Side Handles

Wool-Felt Lined DrawersProtect Precision Tools

Locking Stays Hold Lid Open

Drop-Front Panel Conceals and Secures Drawers - Stores In Base When Not In Use

Heavy-Duty Slides Hold Up to 80 lbs.

17

MECHANICS’ & MACHINISTS’Chests and Bases

Model 266R: 6-Drawer Mechanics’ Chest

Model 526: 8-Drawer Machinists’ Chest


moDEl: 263

moDEl: 2602

moDEl: 2604

moDEl: 2902

moDEl: 2603

moDEl: 2705X

moDEl: 2905X

moDEl: 285

moDEl: 266

moDEl: 360

moDEl: 2812

• Models263,266,&360-Fit On 27” and 29” Wide Roller Cabinets• Model2812-Fits On 29” and 34” Wide Roller Cabinets• Lift-Out Tote Tray with Socket Set Divider Included

*IncludesWeldedSlidesinallDrawers


• Use With All Mechanics’ Chests and 27”, 29”, & 34” Roller Cabinets• Model2902-Fits Model 2812 and 29” or 34” Roller Cabinets Only

• Snap-In Slides Hold Up To 80 lbs. Per Drawer• Models2705X&285(X)Fit27”WideRollerCabinets• Models2905X&2805(X)Fit29”or34”WideRollerCabinets

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

Top TIll:ToTE TRAy:DRAwERS:

26”19 1/2”23”23”23”

11 7/8”7 3/4”10 3/4”10 3/4”10 3/4”

4 1/8”3 3/8”2”3”4”


--111

DRAwERS: 22 7/8” 10 3/4” 4” 80 lbs.2

DRAwERS: 22 7/8” 10 3/4” 2” 80 lbs.4

DRAwERS: 24 7/8” 10 3/4” 4” 80 lbs.2

DRAwERS: 22 7/8”22 7/8”

10 3/4”10 3/4”

2”4”

80 lbs.21

Top TIll:DRAwERS:

26 7/8”23”23”

17 3/4”16 1/2”16 1/2”

3 5/8”2”4”

80 lbs.80 lbs.80 lbs.

-41

Top TIll:DRAwERS:

28 7/8”25”25”

19 3/4”18 1/2”18 1/2”

3 5/8”2”4”


-41

DRAwERS: 23”23”

16 1/2”16 1/2”

2”4”

80 lbs.80 lbs.

41


26”19 1/2”6 7/8”22 7/8”22 7/8”

11 7/8”7 3/4”10 3/4”10 3/4”10 3/4”

4 1/8”3 3/8”2”2”3”


--321


26”19 1/2”6 7/8”6 7/8”22 7/8”22 7/8”

11 7/8”7 3/4”10 3/4”10 3/4”10 3/4”10 3/4”

4 1/8”3 3/8”6 1/4”2”2”3”


--1621


28 9/16”19 1/2”8 5/8”25 1/2”25 1/2”

12”7 3/4”10 3/4”10 3/4”10 3/4”

4 1/8”3 3/8”2”2”3”


--921

263___266___360___2812___

26 1/8”26 1/8”26 1/8”28 5/8”

3-Drawer Chest6-Drawer Chest10-Drawer Chest12-Drawer Chest

12 1/8”12 1/8”12 1/8”12 1/8”

14 3/4”14 3/4”18 7/8”18 7/8”




MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT CAPACITY2602___2603___2604___2902___2600___

26 5/8”26 5/8”26 3/4”28 3/4”26 5/8”

2-Drawer Chest Base3-Drawer Chest Base4-Drawer Chest Base2-Drawer Chest BaseChest Riser

12 1/2”12 1/2”12 1/2”12 1/2”12 1/2”

11 3/4”11 3/4”11 3/4”11 3/4”11 3/4”

1,888 cu. in.1,795 cu. in.1,703 cu. in.2,047 cu. in.3,660 cu. in.



STANDARD MECHANICS’ CHESTS*

MECHANICS’ CHEST BASES*

SNAP-IN MECHANICS’ CHESTS

Continued on next page..

18

MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT

moDEl: 620

moDEl: 5150

moDEl: mC22

moDEl: mC28

moDEl: 520

moDEl: 526

moDEl: 3611

moDEl: 52611

• Models620and520-Come With Vinyl Cushioned, Steel Top Handle• Models526,52611,&3611-Include Steel Side Handles

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

Top TIll:DRAwERS:

20”18 1/4”18 1/4”18 1/4”

8 3/8”7 1/2”7 1/2”7 1/2”

4 1/2”1 1/2”2 1/4”3 1/8”


-111

DRAwERS: 24 1/8”24 1/8”

10 7/8”10 7/8”

2”4 1/8”

90 lbs.90 lbs.

11

DRAwERS: 18”18”

9 3/8”9 3/8”

1 1/2”3 1/2”

90 lbs.90 lbs.

11

DRAwERS: 24 1/2”24 1/2”

9 3/8”9 3/8”

1 1/2”3 1/2”

90 lbs.90 lbs.

11

Top TIll:DRAwERS:

20”8 5/8”8 5/8”18 1/4”18 1/4”

8 3/8”7 1/2”7 1/2”7 1/2”7 1/2”

4 1/2”1”2”1 1/2”2 1/4”


-4111

Top TIll:DRAwERS:

26 1/2”5 1/2”8 5/8”8 5/8”24 3/4”24 3/4”

8 3/8”7 1/2”7 1/2”7 1/2”7 1/2”7 1/2”

4 1/2”5 1/2”1”2”1 1/2”2 1/4”


-HB4111

Top TIll:DRAwERS:

26”5 1/2”7 5/8”7 5/8”23”23”

12 1/8”10 7/8”10 7/8”10 7/8”10 7/8”10 7/8”

4 1/8”5 1/2”1 1/4”2 5/8”2”3”


-HB6121

Top TIll:DRAwERS:

26 1/2”5 1/2”8 5/8”8 5/8”24 3/4”24 3/4”24 3/4”

8 3/8”7 1/2”7 1/2”7 1/2”7 1/2”7 1/2”7 1/2”

4 1/2”4 3/8”1”2”1 1/2”2 1/4”3 1/8”


-HB61111

620___520___526___52611___3611___5150___MC22___MC28___

20 1/8”20 1/8”26 3/4”26 3/4”26 1/8”26 3/4”21 5/8”28 1/8”

3-Drawer Chest7-Drawer Chest8-Drawer Chest11-Drawer Chest11-Drawer Chest2-Drawer Base2-Drawer Base2-Drawer Base

8 1/2”8 1/2”8 1/2”8 1/2”12 1/8”12 1/2”9 5/8”9 5/8”

13 5/8”13 5/8”13 5/8”18”18 7/8”9 1/2”7 7/8”7 7/8”

1,800 cu. in.1,694 cu. in.2,219 cu. in.3,000 cu. in.3,976 cu. in.1,200 cu. in.

865 cu. in.1,179 cu. in.

32 lbs.35 lbs.44 lbs.56 lbs.75 lbs.37 lbs.19 lbs.23 lbs.

25 lbs.28 lbs.36 lbs.47 lbs.69 lbs.28 lbs.17 lbs.21 lbs.

MACHINISTS’ CHESTS & BASES*

moDEl: 285X

moDEl: 2805

moDEl: 2805X

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 23”23”

16 1/2”16 1/2”

2”4”

120 lbs.120 lbs.

41

DRAwERS: 25”25”

18 1/2”18 1/2”

2”4”

120 lbs.120 lbs.

41

DRAwERS: 25”25”

18 1/2”18 1/2”

2”4”

120 lbs.120 lbs.

41

19 1.800.413.8665

MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT CAPACITY2705X___2905X___285___285X___2805___2805X___

27”29”27”27”29”29”

27” 5-Drawer Chest29” 5-Drawer Chest27” 5-Drawer Chest27” 5-Drawer Chest29” 5-Drawer Chest29” 5-Drawer Chest

18”20”18”18”20”20”

18 3/8”18 3/8”16 5/8”16 5/8”16 5/8”16 5/8”

5,842 cu. in.7,077 cu. in.4,000 cu. in.4,000 cu. in.4,872 cu. in.4,872 cu. in.



CAPACITY

Model 6204AdjustableDividers





Model 5150Supports:526,52611,&3611

Model MC22Supports:620&520

Model MC28Supports:526,52611,&3611



moDEl: 1022

moDEl: k20

moDEl: k24

moDEl: 5220

moDEl: 220

TRAY

TRAY

TRAY

TRAY

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

TRAyS: 20 1/2” 4 5/8” 1 1/2” 80 lbs.4

TRAyS: 19 1/2” 7 3/4” 3 3/8” 80 lbs.1

TRAyS: 23 1/2” 7 3/4” 3 3/8” 80 lbs.1

TRAyS: 19 7/8” 6 3/8” 4” 80 lbs.1

Top TIll:DRAwERS:

20”18 1/8”

8 3/8”7 3/8”

4 1/8”2 1/4”

80 lbs.80 lbs.

-2

1022K20K245220220

22 1/8”20 1/8”24 1/8”20 1/8”20 1/8”

22” Cantilever Tool Box20” Pro Tool Box24” Pro Tool Box20” All-Purpose Tool Box2-Drawer Chest

10”8 5/8”8 5/8”7 1/8”8 5/8”

12 5/8”9 3/4”9 3/4”7 1/4”9 3/4”

1,927 cu. in.1,636 cu. in.1,963 cu. in.1,000 cu. in.1,293 cu. in.

19.5 lbs.14 lbs.16 lbs.10 lbs.19 lbs.

18.3 lbs.13 lbs.14.5 lbs.9 lbs.17 lbs.



20 ga22 ga

All Machinists’ Chests & Bases come Standard in brown wrinkle powdercoat paint finish.

HAND CARRY TOOLBOXESProduct Features:

Vinyl Cushioned, Steel Core Top Handle

High-Quality, Plated Locking Hardware

Steel Tote Trays With Socket Set Divider(Select Models Only)

22” CANTILEVER TOOL BOX• Create up to six compartments in each of two trays

with movable/removable partitions and divider sets.• One tray has divider for storing sockets.• Quality plated locking hardware and steel core, vinyl

cushioned handle.

20” PROFESSIONAL TOOL BOX• Includes lift-out tray with socket set divider.• Quality plated locking hardware and steel core,

vinyl cushioned handle.

24” PROFESSIONAL TOOL BOX• Includes lift-out tray with socket set divider.• Quality plated locking hardware and steel core,

vinyl cushioned handle.

20” ALL-PURPOSE TOOL BOX• Includes lift-out tray.• Quality plated locking hardware and

steel core, vinyl cushioned handle.

24” PROFESSIONAL TOOL BOX• A tool chest that can be used as stationary storage on

your work bench or can be carried to the job.• Includes standard lock and two keys.• Vinyl cushioned top carry handle.• Available in brown wrinkle (B) or smooth red finish (R)

Product Features:


11 ga11 ga

1/8” Steel Work Surface

Heavy-Duty, Plated Side Handles

8” x 2” Casters w/Phenolic Wheels(900 lbs. Capacity Each)

Standard Floor Lock Included

21

VERSA-BENCH®

Model 4804: 4 Drawer Versa-Bench®


Stationary Leg Sets Available For 48” and 60” Models(Sold Separately)

Maple Wood Work Surface Protects Your Versa-Bench (Sold Separately)

Model 4806: 6 Drawer Versa-Bench®

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DIA.

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

WIDTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

OVERALL

NET WT

NET WT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

moDEl: 4804

moDEl: 4806

moDEl: 4810

moDEl: 286X

• Padlockable Doors For Added Security.• Two Open Shelves On Back Allow Fast And Easy Tool Access.• Two Additional Casters (6 Total) Can Be Added for Up To 5,400 lbs. Capacity • NOTE:21/4”LipHeightForaTotalProductHeightof381/8”

• Lock And Two Keys, Plus Padlockable Doors For Added Security• Two Open Shelves On Back Allow Fast And Easy Tool Access.• Two Additional Casters (6 Total) Can Be Added for Up To 5,400 lbs. Capacity • NOTE:21/4”LipHeightForaTotalProductHeightof381/8”

• Padlockable Doors For Added Security• Two Additional Casters (6 Total) Can Be Added for Up To 5,400 lbs. Capacity

(See Accessory Section For Further Details)• NOTE:21/4”LipHeightForaTotalProductHeightof381/8”

• High Security Tubular Locking System & Keys• Ball-Bearing Slides On All Drawers

• Replace Bench Casters With Sationary, Steel Formed Legs• Mounts Using The Same Holes As The Casters

• 8” x 2” Roller Bearing Casters with Phenolic Wheels• Two Swivel Casters Per Set• For All Versa-Bench Models

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS:

Top fRoNT CompARTmENT:BoTTom fRoNT CompARTmENT:BACk opEN SHElvES:

23”23”20 3/4”48”48”

16 1/2”16 1/2”19 3/8”19 3/8”5 1/8”

2”4”14 1/4”11 1/2”13”


22

DRAwERS:

Top fRoNT CompARTmENT:BoTTom fRoNT CompARTmENT:BACk opEN SHElvES:

23”23”23”17 1/2”17 1/2”48”

16 1/2”16 1/2”16 1/2”19 3/8”19 3/8”5 1/8”

2”4”5”14 1/4”11 1/2”13”


321

DRAwERS: 29 3/8”29 3/8”12”12”44”

23 1/2”23 1/2”23 1/2”23 1/2”23 1/2”

2”4”2”10”5 3/8”


23311

DRAwERS: 23”23”23”

16 1/2”16 1/2”16 1/2”

2”4”5”

120 lbs.120 lbs.120 lbs.

321

4804___ 48 1/8”4-Drawer Versa-Bench 26” 35 7/8” 26,488 cu. in.375 lbs.345 lbs.



286X___ 27”6-Drawer Cabinet 18” 23 5/8” 6,821 cu. in.112 lbs.102 lbs.

VBLEG___ -Stationary Legs - 9 1/4” 900 lbs. Each14 lbs.10 lbs.

80838 8”8” x 2” Caster Set 2” 9 1/2” 900 lbs. Each19 lbs.15 lbs.

48” 4-DRAWER VERSA-BENCH®



27” 6-DRAWER REPLACEMENT BENCH CABINET

STATIONARY LEG SET

VERSA-BENCH® CASTER SET

22

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

moDEl: 6006

moDEl: 6012S

moDEl: 6012E

• Includes a 6-Drawer Cabinet Equipped With Lock and Two Keys• Features an Open Compartment Behind the Cabinet• Pad-Lockable Rear Doors Cover 2-Shelf Storage Space

• Includes two 6-Drawer Cabinets Equipped With Lock and Two Keys• Features a Rear Compartment for Storing Extra-Large Tools• Pad-Lockable Rear Doors Cover 2-Shelf Storage Space

• Includes two 6-Drawer Cabinets Equipped With Lock and Two Keys• Side Openings Have Shelves and Doors That Can Be Pad-Locked for

Extra Security

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

DRAwERS:

Top fRoNT CompARTmENT:BoTTom fRoNT CompARTmENT:BACk opEN CompARTmENT:

23”23”23”27 1/4”27 1/4”29 1/4”

16 1/2”16 1/2”16 1/2”30 1/8”30 1/8”9 1/2”

2”4”5”11 5/8”14 1/8”26”


321

DRAwERS:

Top BACk CompARTmENT:BoTTom BACk CompARTmENT:BACk opEN CompARTmENT:

23”23”23”27 1/4”27 1/4”29 1/4”

16 1/2”16 1/2”16 1/2”10 7/8”10 7/8”9 1/2”

2”4”5”14 1/2”11 3/8”26”


642

DRAwERS:

Top CompARTmENT:BoTTom CompARTmENT:

23”23”23”20”20”

16 1/2”16 1/2”16 1/2”30 1/8”30 1/8”

2”4”5”11 1/2”14 1/8”


642


6012S___ 60 5/8”12-Drawer Versa-Bench 32” 35 7/8” 28,547 cu. in.525 lbs.500 lbs.

6012E___ 60 7/8”12-Drawer Versa-Bench 32” 35 7/8” 29,154 cu. in.530 lbs.500 lbs.




23 1.800.413.8665


• 1 1/2” Maple Top Has Full-Length Laminations Specially Selected for Grain And Color Match• Comes With Wood Screws, Template, and Easy-To-Read Installation Instructions• ModelWT48-Fits 48” Versa-Benches • ModelWT60-Fits 60” Versa-Benches

WT48___WT60___

47 7/8”60 5/8”

Maple Work SurfaceMaple Work Surface

25 7/8”32”

1 1/2”1 1/2”

--

50 lbs.80 lbs.

45 lbs.75 lbs.

MAPLE WORK SURFACE

BackViewModels:6006,6012S

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

moDEl: w5405X

moDEl: S5405X

moDEl: TS261X

moDEl: wC28

moDEl: w5410X

moDEl: S5410X

moDEl: TS265X

• Maple Work Surface is Made of Quality 1 1/2”-Thick Butcher Block with Full-Grain Laminations• 5-Drawer Unit Features 2 Deep Shelves to Neatly Organize Tools• Adjustable Legs For Leveling, Even On the Roughest Floors• Some Assembly Required on 54” & 26” Models• Metal Thickness: Body - 20 ga. Drawers - 22 ga.

• Durable,12 Gauge Steel Work Surface and Ball-Bearing Slides in All Drawers• 5-Drawer Unit Features 2 Deep Shelves to Neatly Organize Tools• Adjustable Legs For Leveling, Even On the Roughest Floors• Some Assembly Required on 54” & 26” Models• Metal Thickness: Body - 20 ga. Drawers - 22 ga.

• Comes With Ball-Bearing Drawer Slides• One-Inch Thick Press Board Work Surface

• Mounting Holes Spaced 16” Apart for Easy Fastening to Wall Studs (Hardware Included)• Two Adjustable Shelves for Storing Cans of Paint or Lubricants• Perforated Panels on Inside of Pad-Lockable Doors

• DR264X-4 Drawer Package Adds Extra Storage to 26” One-Drawer Tool Stand. • DR265X-5 Drawer Package Adds Extra Storage to Any 54” Work Station.• Slides and Applicable Hardware Included in Both Packages

• IncludesSecurityDoor,MountingHardware,andLockingClip• CanBeMountedForEitherLeftorRightOpening• Pad-LockableDesign(LockNotIncluded)

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

DRAwERS:SHElvES:

17 1/2”17 5/8”

16 1/2”17 1/2”

4”-

120 lbs.120 lbs.

52

DRAwERS:SHElvES:

17 1/2”17 5/8”

16 1/2”17 1/2”

4”-

120 lbs.120 lbs.

52

DRAwERS:SHElf:

17 1/2”17 5/8”

16 1/2”17 1/2”

4”-

120 lbs.120 lbs.

11

SHElvES: 28” 3 3/4” - 80 lbs.2

DRAwERS: 17 1/2” 16 1/2” 4” 120 lbs.10

DRAwERS: 17 1/2” 16 1/2” 4” 120 lbs.10

DRAwERS: 17 1/2” 16 1/2” 4” 120 lbs.5

W5405X___W5410X___

54”54”

5-Drawer Work Station10-Drawer Work Station

20”20”

34 1/2”34 1/2”

16,261 cu. in.11,550 cu. in.

157 lbs.222 lbs.

137 lbs.187 lbs.

S5405X___S5410X___

54”54”

5-Drawer Work Station10-Drawer Work Station

20”20”

34 1/2”33 3/4”

16,261 cu. in.11,550 cu. in.

161 lbs.219 lbs.

144 lbs.196 lbs.

TS261X___TS265X___

26”26”

1-Drawer Tool Stand5-Drawer Tool Stand

20”20”

33 1/2”33 1/2”

6,090 cu. in.5,775 cu. in.

71 lbs.108 lbs.

62 lbs.95 lbs.

DR264X___DR265X___

17 7/8”17 7/8”

4-Drawer Package5-Drawer Package

17 7/8”17 7/8”

16 1/2”20 1/2”

4,020 cu. in.3,775 cu. in.

37 lbs.59 lbs.

33 lbs.52 lbs.

DO26___ 19 3/4”Security Door 5/8” 20 7/8” -12 lbs.10 lbs.

WC28___ 28 1/8”Wall Storage Cabinet 9 5/8” 30” 7,288 cu. in.46 lbs.40 lbs.

54” INDUSTRIAL WORK BENCHES w/ MAPLE TOP

54” INDUSTRIAL WORK BENCHES w/ STEEL TOP

1 & 5-DRAWER HEAVY DUTY TOOL STANDS

WALL STORAGE CABINET

4 & 5 DRAWER PACKAGES

WORK STATION SECURITY DOOR


All work stations come standard in gray wrinkle powdercoat paint finish.

Toolboard Panels provide quick, visual and safe access to tools, parts, accessories, supplies or bins. Can be mounted quickly and easily on any wall and in any panel configuration. Panels are 18” x 36” and are made of 18 gauge reinforced steel.

Product Features:

METAL THICKNESSPanels 18 ga

Reinforced Steel Panels With Square Perfora-tions. Can Be Attached To A Variety Of Surfaces(Fasteners Not Included)

KMC Locking Clips Fasten Toolholders To Panels & Are Quick And Easy To Remove

Toolholder Accessories Hook Easily Onto Panels And Can Be Secured With Locking Clips(Sold Separate)

Hooks, Clips, And Other Accessories Are Industrial Grade Zinc-Plated Steel

25

STEEL TOOLBOARD SYSTEMS


Durable Toolboard Storage Bags Also Available

Mobile Packages Also Available (Select Models Only)

Model 50102: Open Tool Trolley

Model 50067: 2-Panel Framed Toolboard

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

• Includes Two 18” x 36” Steel Toolboard Panels• Set Covers 9 sq.ft. Of Wall Space• Customize Your Needs By Ordering Hooks And/Or Hook Sets

• Consists Of Four 18” x 36” Steel Toolboard Panels• Set Covers 18 sq.ft. Of Wall Space• Includes 60-Piece Toolholder Set (99853)

• Trolley Base Will Accommodate Two Sets (4 Panels) Of Toolboard Panels (Purchased Separately).

• Includes Mounted End Handle And Four 5 x 1 1/4” Casters• Raised Edges Around Base For Easy Storage Of Larger Items

• Comes With Four 18” x 36” Steel Toolboard Panels• Includes Mounted End Handle And Four 5 x 1 1/4” Casters• Raised Edges Around Base For Easy Storage Of Larger Items• Panels Mount To Base At An Incline, Ensuring Tools Are Safely Stowed• Customize By Ordering Hooks And/Or Hook Accessory Sets (Sold Separate)

• Comes With Four 18” x 36” Steel Toolboard Panels• Includes Mounted End Handle And Four 5 x 1 1/4” Casters• Raised Edges Around Base For Easy Storage Of Larger Items• Panels Mount To Base At An Incline, Ensuring Tools Are Safely Stowed• Includes 60-Piece Toolholder Set (99853)

50002___ 18”2-Panel Toolboard Set 1/2” 36” 60 lbs.16 lbs.13 lbs.

50004___ 18”4-Panel Toolboard Set 1/2” 36” 120 lbs.37 lbs.32 lbs.

50100___ 36 3/4”Open Tool Trolley Base 23 7/8” 51 7/8” 400 lbs.48 lbs.40 lbs.

50104___ 36 3/4”Open Tool Trolley 23 7/8” 51 7/8” 400 lbs.88 lbs.78 lbs.

50102___ 36 3/4”Tool Trolley & Holders 23 7/8” 51 7/8” 400 lbs.90 lbs.85 lbs.

2-PANEL STEEL TOOLBOARD SET

4-PANEL STEEL TOOLBOARD SET

OPEN TOOLBOARD TROLLEY BASE

OPEN TOOL TROLLEY

OPEN TOOL TROLLEY & TOOLHOLDER SET

26

Toolsnotincluded

Toolsnotincluded

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH COLOR

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

• High-Grade Aluminum Frame• Includes Two 18” x 36” Steel Toolboard Panels• Height-Adjustable Panels; Simply Slide The Panels And Top Rail, Then Fasten Into Place!• Secure Tools With Steel Toolholders (Sold Separately)• Some Assembly Required• Double Sided

• High-Grade Aluminum Frame• Includes Three 18” x 36” Reinforced Steel Toolboard Panels• Height-Adjustable Panels; Simply Slide The Panels And Top Rail, Then Fasten Into Place!• Secure Tools With Steel Toolholders (Sold Separately)• Some Assembly Required• Double Sided

• High-Grade Aluminum Frame• Includes Two 18” x 36” Reinforced Steel Toolboard Panels• Attaches To Any Work Surface (Mounting Brackets And Hardware Included)• Secure Tools With Steel Toolholders (Sold Separately)• Some Assembly Required• Double Sided

• Enhance Your Visual Tool Control At A Glance!• Cutouts Made From Magnetic Colored Vinyl Let You Identify Missing Tools Instantly• Simply Trace Tools With An Erasable Marker, Cut Out The Shapes, & Apply To Panels• Cutouts Peel Off Easily For Effortless Repositioning

• Fits Models 50067 & 50068• Includes Caster Set (2 Rigid, 2 Swivel), Mounting Plates, & Hardware• Model50083-3 1/2” x 1 1/4” Caster Set• Model50081-5” x 1 1/4” Caster Set

• Plastic Push Handle Can Be Positioned At Any Height Along Toolboard Frame• Fits Models 50067 & 50068• Includes Mounting Hardware

50067___ 39”2-Panel Toolboard Frame 24” 75” 1,265 lbs.50 lbs.45 lbs.

50068___ 39”3-Panel Toolboard Frame 24” 75” 1,944 lbs.75 lbs.70 lbs.

50070___ 39”2-Panel Benchmount 1 1/2” 40” 1,296 lbs.40 lbs.35 lbs.

5008350081

5”5”

3 1/2” x 1 1/4” Caster Set5” x 1 1/4” Caster Set

2”1 1/4”

6”6”

--

25 lbs.30 lbs.

24 lbs.29 lbs.

50053 1”Plastic Push Handle 1 7/8” 7 3/4” -1 lbs..5 lbs.

99814998159981699817

24”24”24”24”

Vinyl Control SheetVinyl Control SheetVinyl Control SheetVinyl Control Sheet

18”18”18”18”

TWO-PANEL FRAMED STEEL TOOLBOARD

THREE-PANEL FRAMED STEEL TOOLBOARD

TWO-PANEL BENCHMOUNT FRAMED TOOLBOARD

MAGNETIC VINYL TOOL CONTROL SHEETS

TOOLBOARD SYSTEM MOBILE PACKAGES

TOOLBOARD PUSH/PULL HANDLE ACCESSORY

27 1.800.413.8665

Tools&toolholdersnotincluded


RedBlueWhiteYellow


• Ruggedly Constructed Steel Cabinet With 2-Point Locking Doors• Square Hole Perforated Cabinet Back And Inner Door Panels• Swing-Out Inner Panels Are 24” x 18” And Provide Additional Storage For Flat Tools• Includes 60-Piece Toolholder Set (99853)

• Has 8 Pockets, Each With Additional Clear Storage Pocket• Mounts Onto Kennedy Toolholder Hooks

• Comes Without The Swing-Out Inner Panels• Includes 30-Piece Toolholder Set (99852)

• Has 5 Netted Pockets And 12 Hand Tool Loops• Mounts Onto Kennedy Toolholder Hooks

• Extra Shelves Can Be Added For More Storage Capacity

moDEl 50260

moDEl 50051: 21” X 16”

moDEl 50230

moDEl 50052: 16” X 24”

moDEl 10351: SToRAgE CABINET SHElf

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

CAPACITY

• Heavy Gauge Welded Steel• 3-Point Locking Doors With 2 Keys• Full-Length Toolboard Panels On Inner Doors• Two 18” x 36” Panels Installed On Cabinet Back• 3 Full-Width Drawers With Ball-Bearing Slides (165 lb. Capacity)• 36” x 20” x 1 1/2” Thick Butcher Block Maple Work Surface• 1 Adjustable, Full-Width Shelf (220 lb Capacity)• Easy-Pull Drawer Handles With Label Holders• Includes 60-Piece Toolholder Set (99853)

• Add A Drawer To Your Mini Workshop Cabinet For Extra Storage• Includes One Drawer With Drawer Slides And Pull With Label Holder

• Made Of Heavy 16 Gauge Steel• 3-Point Locking System Ensures Maximum Security• Comes With 3 Shelves That Can Hold Up To 200 lbs. Each• Steel Toolboard Panels Inside Doors• Includes 20-Piece Toolholder Set (99820 & 99821)

• Keep Small Parts Organized By Dividing Drawers Into Compartments• Model69050-Nine Compartment Divider Kit• Model69051-Twenty Compartment Divider Kit

50301___ 39 1/4”Mini-Workshop Cabinet 23 1/4” 76” 52,542 cu. in.478 lbs.463 lbs.

50310___ 34 5/8”Additional Drawer 17 3/8” 4” 22.0 lbs.19.5 lbs.

10350___10351___

39 1/4”36”

Welded Storage CabinetStorage Cabinet Shelf

23 1/4”21”

76”1 3/4”

52,542 cu. in.-

430 lbs.20 lbs.

405 lbs.18 lbs.

69050___69051___

9-Cmp’t Divider Kit20-Cmp’t Divider Kit

3.60 lbs.6.40 lbs.

50260___50230___

44 1/2”44 1/2”

Wall Mounted CabinetNo Panels Wall Cabinet

11 7/8”11 7/8”

39 3/8”39 3/8”

19,601 cu. in.19,601 cu. in.

120 lbs.96 lbs.

100 lbs.83 lbs.

50051___50052___

21”16”

21” x 16” Storage Bag16” x 24” Storage Bag

--

16”24”

--

1 lbs.1 lbs.

.75 lbs.

.75 lbs.

MINI WORKSHOP CABINET

MINI WORKSHOP CABINET ADDITIONAL DRAWER

ALL WELDED STORAGE CABINET

MINI WORKSHOP CABINET DRAWER DIVIDER KITS

WALL MOUNTED CABINETS

TOOLBOARD STORAGE BAGS


moDEl: 50301 DRS. WIDTH DEPTH HEIGHT CAPACITYDRAwERS:SHElf:

34 5/8”35 7/8”

17 3/8”19 5/8”

4”1 3/4”

120 lbs.120 lbs.

31

moDEl: 10350 QTY. WIDTH DEPTH HEIGHT CAPACITYSHElvES: 36” 21” 1 3/4” -3

Toolsnotincluded.

Toolsnotincluded.

Model:50051 Model:50052

• 4 Single Verticle End Hooks• 2 Single Angled End Hooks• 4 Double Verticle End Hooks

• 17 Assorted Single Hooks• 4 Assorted Double Hooks• 2 Assorted Plier Hooks• 4 Assorted Spring Clips• 1 Ring Hook, Screwdriver Unit, & Wrench Rack

• 33 Assorted Single Hooks• 9 Assorted Double Hooks• 4 Assorted Plier Hooks• 10 Assorted Spring Clips• 1 Ring Hook, Screwdriver Unit, & Wrench Rack• 1 Allen Key Unit

moDEl 99851 - 10pC ToolHolDER SET CoNTAINS:

SINglE Hook - vERTICAl END SINglE Hook - ANglED END

DoUBlE Hook - vERTICAl END AllEN kEy UNIT

plIER Hook SINglE SpRINg ClIpS

RINg Hook

pARTS SHElf

SCREwDRIvER UNIT

CABlE loop Hook SET

DoUBlE Hook - ANglED END

plASTIC BIN SToRAgE STRIp

wRENCH RACk



MASTER No.

UPC No. UPC No.

UPC No. UPC No.

• Stores up to 9-piece metric or imperial key set• Gray finish

• Stores up to 12 screwdrivers, chisels, files, etc• Gray finish

• Gray finish

• Stores up to 8 wrenches• Gray finish

UPC No. UPC No.

UPC No.

UPC No.

UPC No.

UPC No.

UPC No.

UPC No.

UPC No.

ITEM DESCRIPTION

PKG. QTY. PKG. QTY.

PKG. QTY. PKG. QTY.

PKG. QTY. PKG. QTY.

PKG. QTY.

PKG. QTY.

PKG. QTY.

PKG. QTY.

PKG. QTY.

PKG. QTY.

PKG. QTY.

LENGTH LENGTH

LENGTH LENGTH

LENGTH LENGTH

LENGTH

LENGTH

LENGTH

LENGTH

LENGTH

LENGTH

LENGTH

DIA. DIA.

DIA. DIA.

WIDTH DIA.

DIA.

DIA.

DIA.

DIA.

DIA.

DIA.

DIA.

CAPACITY CAPACITY

CAPACITY CAPACITY

CAPACITY CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

CAPACITY

998519985299853

10pc Toolholder Set30pc Toolholder Set60pc Toolholder Set

998209982199822

1”2”3”

10 pcs.10 pcs.10 pcs.

1/4”1/4”1/4”


998239982499825

2 3/8”4”6”


1/4”1/4”1/4”


9982799828

1”2”

10 pcs.10 pcs.

1 3/8”1 3/8”

40 lbs.40 lbs.

99842 -1 pcs. - 3 lbs.

9983199832

1 3/8”2 1/8”

10 pcs.10 pcs.

3/8”3/8”

40 lbs.40 lbs.

99833 99835 99836

---


1/2”3/4”1”

3 lbs.3 lbs.3 lbs.

99839 -2 pcs. 2 3/8” 40 lbs.

99846 17 3/4”1 pcs. 6 3/4” 40 lbs.

99840 -1 pcs. - 10 lbs.

99876 6”5 pcs. - 20 lbs.

9982999830

2”4”

10 pcs.10 pcs.

1”1”

40 lbs.40 lbs.

9984799848

4”17 3/4”

1 pcs.1 pcs.

--

20 lbs.40 lbs.

99841 -1 pcs. - 15 lbs.

TOOLHOLDER SETS

TOOLHOLDER ACCESSORIES

29

1.800.413.8665

Panelnotincluded

Panelnotincluded

Panelnotincluded

Stainless steel storage cabinets are designed for the laboratory/cleanroom environment. Kennedy cleanroom roller cabinets provide the convenience of lockable mobile work stations with secure storage of tools, components and supplies.

30

STAINLESS STEEL CABINETS

MASTER No.

MASTER No.

MASTER No.

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

CAPACITY

CAPACITY

CAPACITY

moDEl: 28085

moDEl: 28087

moDEl: 28197

• Class 100: Cleanroom Certified• Shipped In A Non-Static Generating Bag To Prevent Contamination• High Security Tubular Lock/Key Set• 304 Stainless Steel Body And Drawers; #4 Brushed Finish

• Class 100: Cleanroom Certified• Shipped In A Non-Static Generating Bag To Prevent Contamination• High Security Tubular Lock/Key Set• 304 Stainless Steel Body And Drawers• #4 Brushed Finish

• Class 10: Cleanroom Certified• Easily Accessible Lock With 2, 3, 4 or 5-Digit Combinations• No Batteries Required For Operation• Mechanical Override Key Has Dimple Design To Avoid Unauthorized Copying.• 304 Stainless Steel Body And Drawers• #4 Brushed Finish

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 25”25”25”

18 1/2”18 1/2”18 1/2”

2”4”10”

120 lbs.120 lbs.120 lbs.

131

DRAwERS: 25”25”25”

18 1/2”18 1/2”18 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

331

DRAwERS: 25”25”25”

18 1/2”18 1/2”18 1/2”

2”4”6”

120 lbs.120 lbs.120 lbs.

331

28085 29”5-Drawer Cabinet 20” 35” 10,235 cu. in.141 lbs.126 lbs.



5 DRAWER STAINLESS STEEL CABINET - CLASS 100




• Seamless, ABS White Plastic Cover Fits Snugly Over Roller Cabinet Top• Quarter-Inch Raised Lip Helps Prevent Roll Offs• Easy To Clean; Adds Finished Look

29000 29”Plastic Work Surface 20” 1” -3.5 lbs.3 lbs.

PLASTIC WORK SURFACE ACCESSORY

Product Features:

Stainless Steel Drawer Pulls

Ball-Bearing Drawer Slides Hold Up To

120 lbs

5” x 1” Non-Marking Polyurethane Casters

w/ Grease Seals

Stainless SteelPush Handle

Pictured:Model28085-5DrawerCart




18 ga18 ga

31 1.800.413.8665

You may order pre-configured cabinets shown or custom design your own. See our modular cabinet configurator at www.kennedymfg.com. Accessories are also available to keep tools organized on page 42.

Product Features:

Drawer Slide Capacities:(NX) 220 lbs.(FX) 550 lbs.

One Drawer At A Time Interlocking System

Up To 30% More Total Storage Volume Than Competing Brands, Plus The Highest Weight Capacity In The Industry

Welded Corner Brackets Ensure Maximum Strength & Rigidity

MODULAR STORAGE SYSTEMS

Ribbed Black Vinyl Top Mat Provides A Durable Work Surface

Drawer Dividers For Organized Storage(Sold Separately)

Model 40097UB with Mobile Package

Model 63606

It is highly recommended that modular cabinets be bolted to the floor to prevent tipping/serious injury.


NS drawers have 90% rail extension; 220 lbs. capacity.

NS Front Usable Height Sidewall Height Load Capacity Model # Height Inch Inch Cubic Ft. Lbs. Extension 51002 2" 1.46 1.38 .35 220 90% 51003 3" 2.44 2.17 .59 220 90% 51004 4" 3.43 3.35 .83 220 90% 51005 5" 4.41 3.35 1.06 220 90% 51006 6" 5.39 3.35 1.30 220 90% 51007 7" 6.38 3.35 1.55 220 90% 51008 8" 7.36 3.35 1.78 220 90% 51009 9" 8.35 3.35 2.03 220 90% 51010 10" 9.33 3.35 2.26 220 90% 51012 12" 11.30 3.35 2.74 220 90% 51014 14" 13.27 3.35 3.22 220 90% 51016 16" 15.24 3.35 3.70 220 90%

24" x 24" Housings: Custom Design• Cabinet housings can be filled only with normal suspension (NS) drawers. NS drawers have a load capacity of 220 lbs. (100 kgs.) with 90% extension capability. • Select any combination of drawer front heights that equal the usable height of the cabinet. • Drawers for all 24" x 24" cabinets are listed below.

Standard Width Drawers• Drawer pans have perforations for easy installation of dividers and accessories. • Drawer fronts bolt on to allow changing drawer heights easily as storage needs change. Inside dimensions of drawers are 20.5" x 20.5".

Housing No. 61700Usable Height 32"




Drawer Divider Sets for 24” x 24” CabinetsTo order, use the four digit number and add the number 2, 3 or 4 as a suffix. To order a divider set 9110 for a 2” drawer, order number 91102, 91103 for 3” drawer and 91104 for 4”-16” drawer. Taller subdividers and partitions are available on request.

91102 Comp.

10” x 20.5”

91138 Comp.

10” x 4.75”

91216 Comp.

6.25” x 10”

912312 Comp.

6.25” x 4.75”

913316 Comp.

4.75” x 4.75”

913420 Comp.

4.75” x 3.75”

9110

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9113

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9121

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9123

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9133

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9134

0 3 6 9 12 15 18 21 24 26

0 3 6 9 12 15 18 21 24 26

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

• NS Drawers Extend 90% And Have 220 lbs. Per Drawer Load Capacity• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors

24” X 24” MODULAR CABINETS

DRAWERDIMENSIONS

DRS. W x xD H20 1/2”20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”20 1/2”

3”4”6”8”

2212

7-DRAWER CABINET

MASTER No. WIDTH DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY61407 24” 24” 39 3/5” 15,128 cu. in.234 lbs.214 lbs. 1,540 lbs.

DRAWERDIMENSIONS

DRS. W x xD H20 1/2”20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”20 1/2”

3”4”6”8”

2322

9-DRAWER CABINET


DRAWERDIMENSIONS

DRS. W x xD H20 1/2”20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”20 1/2”

2”4”6”8”

1131

6-DRAWER CABINET


DRAWERDIMENSIONS

DRS. W x xD H20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”

4”6”8”

221

5-DRAWER CABINET


61407

61509

61303

61703

Modular Workstation with two 61303TX cabinets and one WT6030 maple top.

33

• FX Drawers Extend 100% And Have 550 lbs. Per Drawer Load Capacity• Drawer Slides Move Smoothly On Precision Ball-Bearings• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors


DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”

20 1/2”20 1/2”20 1/2”20 1/2”

3”4”6”8”

2212

7-DRAWER CABINET


DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”

20 1/2”20 1/2”20 1/2”20 1/2”

3”4”6”8”

2322


9-DRAWER CABINET

DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”

20 1/2”20 1/2”20 1/2”20 1/2”

3”4”6”8”

1423


10-DRAWER CABINET

62407

62610

62509

FX Front Usable Height Sidewall Height Load Capacity Model # Height Inches Inches Cubic Ft. Lbs. Extension 52103 3" 2.44 2.17 .75 550 100% 52104 4" 3.43 3.35 1.05 550 100% 52105 5" 4.41 3.35 1.35 550 100% 52106 6" 5.39 3.35 1.66 550 100% 52107 7" 6.38 3.35 1.96 550 100% 52108 8" 7.36 3.35 2.26 550 100% 52109 9" 8.35 3.35 2.57 550 100% 52110 10" 9.33 3.35 2.87 550 100% 52112 12" 11.30 3.35 3.47 550 100% 52114 14" 13.27 3.35 4.08 550 100% 52116 16" 15.24 3.35 4.69 550 100%

Drawers for 30” x 24” Cabinets• Drawer pans have perforations for easy installation of dividers and accessories. • Drawer fronts bolt on to allow changing drawer heights easily as storage needs change. Inside dimensions of drawers are 26" x 20.5".

FX drawers have 100% rail extension; 550 lbs. capacity.




30" x 24" Housings: Custom Design• To order custom designed cabinets, fill with drawers listed below.• Drawer front heights must add up to the usable height in the housing.

Drawer Divider Sets for 30” x 24” CabinetsChoose any divider set below that meets your needs. To order, use the four digit number and add the number 2, 3 or 4 as a suffix. To order a divider set 9211 for a 2" drawer, order number 92112, 92113 for 3" drawer and 92114 for 4"-16" drawer. Taller subdividers and partitions are available on request.

9212

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9213

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9222

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33 0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9223

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33 0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9233

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33 0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9243

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9254

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9263

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

0

3

6

9

12

15

18

21

2426

9274

0

3

6

9

12

15

18

21

2426

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

0

3

6

9

12

15

18

21

2426

92126 Comp.

13” x 6.25”

92138 Comp.

13” x 4.75”

92229 Comp.

8.5” x 6.25”

922312 Comp.

8.5” x 4.75”

923316 Comp.6” x 4.75”

924320 Comp.

4.75” x 4.75”

925430 Comp.

3.75” x 3.75”

926328 Comp.3” x 4.75”

927428 Comp.3” x 3.75”

34

• Available With NX or FX Drawer Slides• NX Drawers Extend 87% And Have 220 lbs. Per Drawer Load Capacity• FX Drawers Extend 100% And Have 550 lbs. Per Drawer Load Capacity• Drawer Slides Move Smoothly On Precision Ball-Bearings• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors

• Each Drawer Holds Four Partitions• Each Partition Will Hold: (6) Susta 70053 50 Taper Sockets

(8) Susta 70051 40 Taper Sockets(8) Susta 70059 30 Taper Sockets

30” X 30” X 40” MODULAR CABINETS

SOCKET PARTITION


MASTER No. WIDTH DEPTH HEIGHT NET WT SHIP WT76209 25 7/8” 1” 4 1/4” 7.5 lbs.7 lbs.

8-DRAWER CABINETSDRS. W x xD H

26”26”26”26”

26”26”26”26”

2”4”6”8”

4121

MASTER No. WIDTH

DRAWERDIMENSIONS

DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY63405NX63406FX

30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

293 lbs.380 lbs.

273 lbs.360 lbs.

1,760 lbs.4,400 lbs.

7-DRAWER CABINETSDRAWERDIMENSIONS

DRS. W x xD H26”26”26”

26”26”26”

4”6”8”

421

MASTER No. WIDTH DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY63407NX63408FX

30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

280 lbs.359 lbs.

260 lbs.339 lbs.

1,540 lbs.2,850 lbs.

6-DRAWER CABINETS

DRAWERDIMENSIONS

DRS. W x xD H26” 26” 6”6


30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

268 lbs.334 lbs.

248 lbs.314 lbs.

1,320 lbs.3,300 lbs.


DRS. W x xD H26”26”26”

26”26”26”

4”6”8”

222


30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

266 lbs.333 lbs.

246 lbs.313 lbs.

1,320 lbs.3,300 lbs.

12-DRAWER CABINETS

DRAWERDIMENSIONS

DRS. W x xD H26” 26” 3”12


30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

346 lbs.472 lbs.

326 lbs.452 lbs.

2,640 lbs.6,600 lbs.


DRS. W x xD H26”26”26”26”

26”26”26”26”

2”3”4”6”

1242


30”30”

30”30”

39 5/8”39 5/8”

24,336 cu. in.24,336 cu. in.

307 lbs.400 lbs.

287 lbs.380 lbs.

1,760 lbs.4,400 lbs.

4-DRAWER MACHINE CABINETDRAWERDIMENSIONS

DRS. W x xD H26”26”26”

26”26”26”

4”6”12”

121


63405NX63406FX

63409NX63410FX

63416NX63417FX

63303

76209

63407NX63408FX

63411NX63412FX

63418NX63419FX

35 1.800.413.8665

• Available With NX or FX Drawer Slides• NX Drawers Extend 87% And Have 220 lbs. Per Drawer Load Capacity• FX Drawers Extend 100% And Have 550 lbs. Per Drawer Load Capacity• Drawer Slides Move Smoothly On Precision Ball-Bearings• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors

30” X 30” X 60” MODULAR CABINETS


13-DRAWER CABINETS

MASTER No. WIDTH

DRS. W x xD H26”26”26”26”26”

26”26”26”26”26”

3”4”5”6”8”

54211

DRAWERDIMENSIONS

DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY63605NX63606FX

30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

421 lbs.565 lbs.

401 lbs.545 lbs.

2,860 lbs.7,150 lbs.

10-DRAWER CABINETS

DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”26”26”

26”26”26”26”26”26”

4”5”6”4”6”8”

211222


30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

381 lbs.494 lbs.

361 lbs.474 lbs.

2,200 lbs.5,500 lbs.

9-DRAWER CABINETS


30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

370 lbs.469 lbs.

350 lbs.449 lbs.

1,980 lbs.4,950 lbs.

DRAWERDIMENSIONS

DRS. W x xD H26”26”26”

26”26”26”

6”7”6”

216


DRS. W x xD H26”26”26”

26”26”26”

3”4”3”

51

12


30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

487 lbs.677 lbs.

467 lbs.675 lbs.

3,960 lbs.9,900 lbs.

DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”26”26”

26”26”26”26”26”26”

3”4”6”4”6”12”

311321

11-DRAWER CABINETS


30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

393 lbs.478 lbs.

373 lbs.458 lbs.

2,420 lbs.6,050 lbs.

DRAWERDIMENSIONS

DRS. W x xD H26”26”26”26”26”26”

26”26”26”26”26”26”

3”4”5”6”8”10”

221311

10-DRAWER CABINETS


30”30”

30”30”

59 1/2”59 1/2”

37,180 cu. in.37,180 cu. in.

380 lbs.491 lbs.

350 lbs.471 lbs.

2,200 lbs.5,500 lbs.

63605NX63606FX

63611NX63612FX

63618NX63619FX

63609NX63610FX

63616NX63617FX

63620NX63621FX




30" x 30" Standard Width HousingsCabinet housings can be filled with full extension (FX), 550 lbs., or normal extension (NX), 220 lbs., drawers. They can be mixed within these cabinets for cost efficient combinations.

Select any combination of drawer front heights that equal the usable height of the cabinet. NX drawers can be converted to FX drawers at a later date if storage requirements change. All 2" drawers are NX type drawers.

Fork lift bases and pallet truck bases are available. See page 43 for more information. Dividers sets shown below. Other drawer accesso-ries are on page 42.

Housing No. 63600 Housing No. 63400 Usable Height 55" Usable Height 36"

Standard Width Drawers for all 30” x 30” CabinetsDrawer pans have perforations for easy installation of dividers and accessories. Drawer fronts bolt on to allow changing drawer heights easily as storage needs change. Inside dimensions of drawers are 26" x 26" giving 4.69 sq. ft. of storage area.

NX drawers have 87% rail extension; 220 lbs. capacity.

FX drawers have 100% rail extension; 550 lbs. capacity.

NX Front Usable Height Sidewall Height Load Capacity Model # Height Inches Inches Cubic Ft. Lbs. Extension 63002 2" 1.46 1.38 .57 220 87% 63003 3" 2.44 2.17 .95 220 87% 63004 4" 3.43 3.35 1.34 220 87% 63005 5" 4.41 3.35 1.72 220 87% 63006 6" 5.39 3.35 2.11 220 87% 63008 8" 7.36 3.35 2.88 220 87% FX Model # 63103 3" 2.44 2.17 .95 550 100% 63104 4" 3.43 3.35 1.34 550 100% 63105 5" 4.41 3.35 1.72 550 100% 63106 6" 5.39 3.35 2.11 550 100% 63107 7" 6.38 3.35 2.49 550 100% 63108 8" 7.36 3.35 2.88 550 100% 63109 9" 8.35 3.35 3.26 550 100% 63110 10" 9.33 3.35 3.65 550 100% 63112 12" 11.30 3.35 4.42 550 100% 63114 14" 13.27 3.35 5.18 550 100% 63116 16" 15.24 3.35 5.96 550 100%

While we offer pre-engineered modular cabinets for your convenience, you may also design your own to fit special tool storage requirements. Log on to our website at www.kennedymfg.com to design your own modular cabinet. It's convenient and easy. Or, you may call our customer service department at 800-413-8665 and speak to one of our representatives for personalized assistance.

Custom Designed Modular Cabinets

Drawer Divider Sets for 30” x 30” CabinetsChoose any divider or box set below that meets your needs. To order, use the four digit number and add the number 2, 3 or 4 as a suffix. To order a divider set 9310 for a 2" drawer, order 93102, 93103 for a 3" drawer and 93104 for 4"-16" drawers. Taller subdividers and partitions are available on request. See page 39 for drawer divider components and accessories.

9310

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9313

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9312

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9310 9312 9313 9321 9322 9323 9324 9325 2 Comp. 6 Comp. 8 Comp. 6 Comp. 9 Comp. 12 Comp. 15 Comp. 18 Comp. 13” x 26” 13” x 8.5” 13” x 6.25” 8.5” x 13” 8.5” x 8.5” 8.5” x 6.25” 8.5” x 4.75” 8.5” x 3/75”

9321

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9322

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9323

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9324

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9325

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9333

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9334

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9335

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9337

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

9342

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

9355

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

9364

27

0

3

6

9

12

15

18

21

24

33

30

27

0

3

6

9

12

15

18

21

24

33

30

0 3 6 9 12 15 18 21 24 27 30 33

0 3 6 9 12 15 18 21 24 27 30 33

9377

0

3

6

9

12

15

18

21

24

33

27

30

27

0

3

6

9

12

15

18

21

24

33

30

9333 9334 9335 9337 9342 9355 9364 9377 16 Comp. 20 Comp. 24 Comp. 32 Comp. 15 Comp. 36 Comp. 35 Comp. 64 Comp. 6” x 6.25” 6” x 4.75” 6” x 3.75” 6” x 3” 4.5” x 8.5” 3.75” x 3.75” 3” x 4.75” 3” x 3”

37

• FX Drawers Extend 100% And Have 550 lbs. Per Drawer Load Capacity• Drawer Slides Move Smoothly On Precision Ball-Bearings• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors


DRAWERDIMENSIONS

DRS. W x xD H40 1/8”40 1/8”40 1/8”

26”26”26”

3”4”6”

631


10-DRAWER CABINET

DRS. W x xD H40 1/8”40 1/8”40 1/8”40 1/8”40 1/8”

26”26”26”26”26”

3”4”5”6”8”

12121

DRAWERDIMENSIONS


7-DRAWER CABINET


13-DRAWER CABINETDRAWERDIMENSIONS

DRS. W x xD H40 1/8”40 1/8”40 1/8”

26”26”26”

3”4”6”

544

DRS. W x xD H40 1/8”40 1/8”40 1/8”40 1/8”40 1/8”

26”26”26”26”26”

3”4”5”6”8”

22123

DRAWERDIMENSIONS


10-DRAWER CABINET


DRAWERDIMENSIONS

DRS. W x xD H40 1/8”40 1/8”40 1/8”

26”26”26”

6”7”12”

213

6-DRAWER CABINET

64404

64410

64608

64408

64606

64610

6-DRAWER CABINET


DRAWERDIMENSIONS

DRS. W x xD H40 1/8” 26” 6”6

Extra wide cabinets are the most cost and space efficient modular cabinets for centralized large tool and parts storage. All Kennedy modular cabinet drawers and body are constructed of 18 gauge steel. Order pre-configured cabinets, or custom design your own. See our modular cabinet configurator at www.kennedymfg.com. or call our customer service department for personalized assistance. Accessories are also available to keep tools organized on page 42.

38

95216 Compartments

13” x 13”

954215 Compartments

7.75” x 8.5”

954425 Compartments

7.75” x 4.75”

954430 Compartments

6.25” x 4.75”

956435 Compartments

5.5” x 4.75”

Extra Wide Drawers for all 44” x 30” CabinetsHeavy-gauge, welded steel FX drawers are mounted on eight ball bearings for smooth operation under heavy loads. Drawer fronts bolt on to allow changing drawer heghts easily as storage needs change. Inside dimensions of drawer are 40.16" W x 26" D.

While we offer pre-engineered modular cabinets for your convenience, you may also design your own to fit special tool storage requirements. Log on to our website at www.kennedymfg.com to design your own modular cabinet. It's convenient and easy. Or, you may call our customer service department at 800-413-8665 and speak to one of our representatives for personalized assistance.

Custom Designed Modular Cabinets

44" x 30" Extra Wide HousingsExtra wide housings require full extension (FX), 550 lbs. drawers. Select any combination of drawer front heights that equal the usable height of the cabinet.

Drawers and drawer divider sets are listed below. All models are shipped assembled and come with lock and two keys. Additional accessories are on page 42. Fork lift base and pallet truck bases also available on page 43.



FX Front Usable Height Sidewall Height Load Capacity Model # Height Inches Inches Cubic Ft. Lbs. Extension 64103 3" 2.32 2.00 1.40 550 100% 64104 4" 3.31 3.35 1.99 550 100% 64105 5" 4.29 3.35 2.59 550 100% 64106 6" 5.28 3.35 3.18 550 100% 64107 7" 6.38 3.35 3.85 550 100% 64108 8" 7.24 3.35 4.37 550 100% 64109 9" 8.35 3.35 5.04 550 100% 64110 10" 9.21 3.35 5.56 550 100% 64112 12" 11.18 3.35 6.75 550 100% 64114 14" 13.15 3.35 7.95 550 100% 64116 16" 15.12 3.35 9.12 550 100%

FX drawers have 100% rail extension and

550 lbs. capacity.

Drawer Divider Sets for Extra Wide CabinetsChoose any divider set below that meets your needs. To order, use the four digit number and add the 3 or 4 as a suffix. To order divider set 9532 for a 3" drawer, order 95323 and 95324 for 4"-16" drawer. Taller subdividers and partitions are available on request. See page 42 for drawer divider components and accessories.

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 0

3

6

9

12

15

18

21

24

33

27

30

0

3

6

9

12

15

18

21

24

33

27

30

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51

9521

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 0

3

6

9

12

15

18

21

24

33

27

30

0

3

6

9

12

15

18

21

24

33

27

30

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51

9542

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 0

3

6

9

12

15

18

21

24

33

27

30

0

3

6

9

12

15

18

21

24

33

27

30

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51

9544

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 0

3

6

9

12

15

18

21

24

33

27

30

0

3

6

9

12

15

18

21

24

33

27

30

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51

9554

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51 0

3

6

9

12

15

18

21

24

33

27

30

0

3

6

9

12

15

18

21

24

33

27

30

0 3 6 9 12 15 18 21 24 27 30 33 36 39 42 45 48 51

9564




39 1.800.413.8665

MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY

• NS Drawers Extend 87% And Have 220 lbs. Per Drawer Load Capacity• Drawer Slides Move Smoothly On Precision Ball-Bearings• Full-Width Drawer Pulls Come With Label Strips And Plastic Protectors

61303

61703

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY

DRAwERS: 20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”

4”6”8”

220 lbs.220 lbs.220 lbs.

221

DRAwERS: 20 1/2”20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”20 1/2”

2”4”6”8”

220 lbs.220 lbs.220 lbs.220 lbs.

1131

MODULAR WORKSTATIONS

WORKSTATION COMPONENTS

613036170366200WT6030WT7230566075660856601567216660666726

24”24”4”60”72”60”72”60”72”22-38 5/8”38 5/8-66 3/8”

5-Drawer Cabinet6-Drawer CabinetAdjustable LegMaple Work SurfaceMaple Work SurfaceSide/Back Retainer SetSide/Back Retainer SetFixed Riser ShelfFixed Riser ShelfAdjustable Foot RestAdjustable Foot Rest

24”24”24”30”30”30”30”9”9”2”2 1/4”

31 3/4”35 5/8”27 1/2-40 1/8”1 3/4”1 3/4”4”4”14”14”1 3/4”1 3/4”

11,767 cu. in.13,447 cu. in.29,315 cu. in.

--------

166 lbs.184 lbs.25 lbs.75 lbs.98 lbs.12.5 lbs.13.5 lbs.28 lbs.29 lbs.6 lbs.9 lbs.

146 lbs.164 lbs.23 lbs.73 lbs.96 lbs.11 lbs.12 lbs.27 lbs.28 lbs.5 lbs.8 lbs.

1,100 lbs.1,320 lbs.5,500 lbs.

--------

Kennedy’s work stations include all the components you need for an individual bench or a complete work station complex. Featured are our most popular work station combinations. To order, choose the work station that suits your needs and a 60” or 72” maple top. You may order our standard combinations or custom design the units you need from individual components. See page 36 for cabinet housing and drawer information. Drawer dividers and accessories are on page 42.

Model 69148 Includes:• Two 61303, 24" x 24" cabinets• One 72" top no. WT7230 • Order top separately(shown below)

Model 69104 Includes:• Two adjustable legs no. 66200• One 60" top no. WT6030 or • One 72" top no. WT7230• Order top separately(shown below)

Model 69146 Includes:• One adjustable leg no. 66200 • one 61703, 24" x 24" cabinet• One 60" top no. WT6030 or • One 72" top no. WT7230• Order top separately (shown below)

Adjustable Leg• Adjusts in 1" increments from 27.5" to 40.125".• Model 66200

Laminated Maple Work Surface• Hardwood work surface is suitable for most any application.• Welded butcher block construction with a smooth, maintenance free acrylic finish.• Model WT6030—60" W• Model WT7230—72" W

Footrests• Attach between work bench legs or between cabinet and legs.• Model 66606—Adjusts from 22" to 385/8"• Model 66726—Adjusts from 385/8" to 663/8"

Fixed Riser Shelf• Stationary riser is made of heavy gauge steel.• Shelf is 14" high by 9" deep.• Has electrical knockouts.• Model 56601—Fits 60" work top• Model 56721—Fits 72" work top

Side/Back Retainer Set• Four-inch high steel side/back stops attach to work tops for safety and damage protection.• Model 56607—For 60" work top• Model 56608—For 72" work top


MASTER No. ITEM DESCRIPTION WIDTH DEPTH HEIGHT NET WT SHIP WT STORAGE CAPACITY

• 4” Drawers Have 130 lbs Capacity• Larger Drawers Have 220 lbs Capacity• One Drawer At A Time Interlocking System• All Cabinets Include a MDF Work Surface• Drawer Dividers Available, Sold Separately • Comes With Label Strips, Lock and Two Keys• MDF Work Surface Included

40095

40096

40097

DRS.

DRS.

DRS.

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

CAPACITY

CAPACITY

CAPACITY

DRAwERS: 25”25”25”

18 1/2”18 1/2”18 1/2”

4”6”8”

130 lbs.220 lbs.220 lbs.

221

DRAwERS: 25”25”

18 1/2”18 1/2”

4”6”

130 lbs.220 lbs.

42

DRAwERS: 25” 18 1/2” 4” 130 lbs.7

HMSTM SERIES MODULAR CABINETS

400954009640097

29”29”29”

5-Drawer Cabinet6-Drawer Cabinet7-Drawer Cabinet

20”20”20”

33 1/2”33 1/2”33 1/2”

12,950 cu. in.12,950 cu. in.12,950 cu. in.

164 lbs.165 lbs.169 lbs.

144 lbs.145 lbs.149 lbs.

920 lbs.960 lbs.910 lbs.

Drawer Divider Sets for Hybrid Modular CabinetsDrawer divider sets include partitions that fasten to drawer bottom and divide drawer into sections, plus subdividers that can inserted into slots to form compartments. Partitions and subdividers are 31/2” high.

420016 Comp.

8.3” x 9.25”

420028 Comp.

12.5” x 4.6”

4200312 Comp.8.3” x 4.6”

4200412 Comp.6.2” x 6.1”

4200520 Comp.6.2” x 3.6”

Our hybrid modular system combines the economy of roller cabinet construction with modular cabinet features. Compact, high-density storage that saves space while it organizes parts, tools and supplies. Cabinets are stackable, can be fork-lifted or used as work stations. Cabinets can also be used as work station base cabinets, using two cabinets to support work surface or one cabinet with adjustable work station leg 66200 shown on page 38. Body made of 16 gauge steel; drawers of 18 gauge steel.

5 Drawer CabinetModel 40095



HMS™ Series Drawers• Constructed of 18 gauge steel.• Drawers have bottom perforations and side wall divider slots for easy installation of divider sets.• Two-inch drawers cannot be divided.• Model Nos. 40002, 40004, 40006, 40008

Drawer Net Ship Master Dimensions (Inches) Cu. In. Load Wt. Wt. No. Width Depth Height Cap. Cap. Lbs. Lbs.40002 25 181/2 2 925 120 11 1240004 25 181/2 4 1,850 130 14 1540006 25 181/2 6 2,775 220 16 1740008 25 181/2 8 3,700 220 19 20

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

HMS™ Series Housing• Custom design your own cabinet.• Select any combination of drawer front heights that equal the usable height (28") of the cabinet. • Model 40001

28"

29" 20"

Housing Net Ship Master Dimensions (Inches) Wt. Wt. No. Width Depth Height Lbs. Lbs.40001 29 20 331/2 87 90

Subdivider Length 99225 6½ 99265 81/8

99305 12 99325 12¾

Partition Length 99020 18½

HMS™ Subdividers and Partitions• Customize your HMS™ modular cabinet drawers.• Partitions and subdividers are 31/2” high.

Mobile Package• Consists of tubular side handle and 6 x 2" locking caster set— two swivel, two rigid• Adds 71/4" to height of cabinet• Model 42010

• NS Latching Drawers With Ball-Bearing Slides: 220 lbs Capacity Per Drawer• Vinyl Top Mat, 2 Vinyl Side Handles, And 5 x 1 1/2” Casters• High Security Tubular Locking System With 2 Keys

• Can Be Filled With NS Latching Drawers Only• Vinyl Top Mat, 2 Vinyl Side Handles, And 5 x 1 1/2” Casters• High Security Tubular Locking System With 2 Keys

61203

61750

DRS.

DRS.

WIDTH

WIDTH

DEPTH

DEPTH

HEIGHT

HEIGHT

CAPACITY

CAPACITY

DRAwERS: 20 1/2”20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”20 1/2”

2”4”6”8”

220 lbs.220 lbs.220 lbs.220 lbs.

2111

DRAwERS: 20 1/2”20 1/2”20 1/2”

20 1/2”20 1/2”20 1/2”

3”4”5”

220 lbs.220 lbs.220 lbs.

242

24” x 24” MOBILE MODULAR STORAGE SYSTEMS

24” x 24” MOBILE MODULAR HOUSING

MASTER No.

HOUSING

DRAWERS

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

STORAGE

STORAGE

STORAGE

6120361750

24”24”


24”24”

25 3/5”42 2/5”

9,245 cu. in.13,447 cu. in.

185 lbs.241 lbs.

165 lbs.221 lbs.

6129061759

24”24”

26” Tall Housing42” Tall Housing

24”24”

25 3/5”42 2/5”

14,745 cu. in.24,422 cu. in.

93 lbs.107 lbs.

83 lbs.97 lbs.

51902519035190451905519065190751908

26”26”26”26”26”26”26”

Latching DrawerLatching DrawerLatching DrawerLatching DrawerLatching DrawerLatching DrawerLatching Drawer

26”26”26”26”26”26”26”

2”3”4”5”6”7”8”

1,352 cu. in.2,028 cu. in.2,704 cu. in.3,380 cu. in.4,056 cu. in.4,732 cu. in.5,408 cu. in.

11 lbs.12 lbs.14 lbs.14.5 lbs.15 lbs.15.5 lbs.16 lbs.


Model 61290Usable height 22”


41

Mobile modular cabinets make taking your tools to the job site easy and convenient. And, you get high density storage, too. Order our pre-engineered models or custom design your own from the housings and drawers listed below. All models are shipped assembled. Divider sets and accessories available.

• NX Latching Drawers With Ball-Bearing Slides: 220 lbs Capacity Per Drawer• Vinyl Top Mat, 2 Vinyl Side Handles, And 5 x 1 1/2” Casters• High Security Tubular Locking System With 2 Keys

• Can Be Filled With NX Latching Drawers Only• Vinyl Top Mat, 2 Vinyl Side Handles, And 5 x 1 1/2” Casters• High Security Tubular Locking System With 2 Keys

63350 DRS. WIDTH DEPTH HEIGHT CAPACITYDRAwERS: 26”

26”26”26”

26”26”26”26”

3”4”6”8”

220 lbs.220 lbs.220 lbs.220 lbs.

2211

30” x 30” MOBILE MODULAR STORAGE SYSTEMS

30” x 30” MOBILE MODULAR HOUSING

MASTER No.

HOUSING

DRAWERS

ITEM DESCRIPTION

ITEM DESCRIPTION

ITEM DESCRIPTION

WIDTH

WIDTH

WIDTH

DEPTH

DEPTH

DEPTH

HEIGHT

HEIGHT

HEIGHT

NET WT

NET WT

NET WT

SHIP WT

SHIP WT

SHIP WT

STORAGE

STORAGE

STORAGE

63350 30”5-Drawer Cabinet 30” 38 1/2” 18,928 cu. in.303 lbs.283 lbs.

63359 30”7-Drawer Housing 30” 38 1/2” 25,200 cu. in.325 lbs.305 lbs.

63902639036390463905639066390763908

26”26”26”26”26”26”26”

Latching DrawerLatching DrawerLatching DrawerLatching DrawerLatching DrawerLatching DrawerLatching Drawer

26”26”26”26”26”26”26”

2”3”4”5”6”7”8”

1,352 cu. in.2,028 cu. in.2,704 cu. in.3,380 cu. in.4,056 cu. in.4,732 cu. in.5,408 cu. in.




42

Use partitions to divide drawers in sections. Insert subdividers to make compartments. Partitions fasten to drawer bottom with screw and can be fitted from front to back or side to side. Subdividers slide into slots in partitions and side walls. Slots are .79” (20mm) apart.

DRAWER PARTITIONS & SUBDIVIDERS

PARTITION LENGTH

SUBDIVIDER LENGTH

SPACES

SPACES

2” FRONT

2” FRONT

3” FRONT

3” FRONT

4” FRONT

4” FRONT

20.35” (517mm)25.87” (657mm)40.15” (1020 mm)

Note: Taller partitions and subdividers for use with higher side walls (drawer height extensions) are available. Contact your Kennedy distributor for more information.

9903299042

-

990339904399053

990349904499054

263351

1.42” (36mm)2.02” (56mm)2.99” (76mm)3.78” (96mm)4.57” (116mm)5.35” (136mm)6.14” (156mm)6.93” (176mm)7.72” (196mm)8.50” (216mm)9.29” (236mm)10.08” (256mm)12.44” (316mm)13.23” (336mm)

9950599122995039916299182992029922299242992629928299289993029932299342

9910399123991439916399183992039922399243992639928399290993039932399343

9910499124991449916499184992049922499244992649928499291993049932499344

23456789101112131617

Plastic Box Sets for 30” x 30” Modular Cabinets




Plastic Groove TraysA simple way to store reamers, taps and drill bits. Trays clip together. Made of black polystyrol. Fits 2" or taller drawers.

No. of Grooves/ Groove Width Order No. 2 grooves/2.875" 96002 3 grooves/1.875" 96003 4 grooves/1.375" 96004

PLASTIC GROOVE TRAYS

Divider Size Order No. 2 grooves/2.875" 96005 3 grooves/1.875" 96006 4 grooves/1.375" 96007

TRAY DIVIDERS

Plastic Groove Trays are 6.25" W x 6.25" D x 1.375"H.

Plastic BoxesHold small parts and electronic components. Available in three sizes. Fits 3" or taller drawers. Can be clipped together in any combination. Made of black polystyrol.

Order Box Size No. 2.5"W x 2.5"D x 2.25"H 96022 2.5"W x 5"D x 2.25"H 96025 6.25"W x 6.25"D x 2.25"H 96066 Bin Divider for 6.25" x 6.25" Bin 96008

9601616 Boxes

6.25” x 6.25”

96100100 Boxes2.5” x 2.5”

9602424 Boxes

6.25” x 6.25”

960099 Boxes

6.25” x 6.25”

9601212 Boxes

6.25” x 6.25”

9608080 Boxes2.5” x 2.5”

96150150 Boxes2.5” x 2.5”

9606464 Boxes2.5” x 2.5”

960388 Boxes - 6.25” x 6.25”

20 Boxes - 2.5” x 5”10 Boxes - 2.5” x 2.5”

960288 Boxes - 6.25” x 6.25”

10 Boxes - 2.5” x 5”10 Boxes - 2.5” x 2.5”

960554 Boxes - 6.25” x 6.25”

24 Boxes - 2.5” x 5”27 Boxes - 2.5” x 2.5”

9603520 Boxes - 6.25” x 6.25”

15 Boxes - 2.5” x 5”

960304 Boxes - 6.25” x 6.25”

13 Boxes - 2.5” x 5”13 Boxes - 2.5” x 2.5”

43 1.800.413.8665

Adjustable Shelf• Adjustable support brackets allow shelf location to be easily changed.

Pull Out Shelf with Drawer Handle• Safety feature, lock-out pin prevents shelf from moving back inside the cabinet until the pin is released.

Bottom Shelf• Turns cavity in bottom of cabinet into easy access storage area.

Pull Out Shelf with Gussets• For use in cabinets with doors.• Features safety lock-out pin mechanism.

Modular Cabinet Doors• Secure expensive tools and supplies behind a locking door.• Comes with attachment hardware and lock/key set.• Pull out shelf with gussets must be used instead of standard drawer with drawer pull in order for door to close. Net Ship Master Wt. Wt. No. Fits Housing No./Size Lbs. Lbs. 63680 63600, 30" x 30" x 59.5" 35 36 63480 63400, 30" x 30" x 39.6" 25 26 63380 63300, 30" x 30" x 31.7" 22 23 62580 62500, 30" x 24" x 49.6" 30 31 62780 62700, 30" x 24" x 35.6" 23 24 64680 64600, 44" x 30" x 59.5" 47 48 64480 64400, 44" x 30" x 39.6" 34 35 61280 61200, 24" x 24" x 25.6" 16 17 61380 61300, 24" x 24" x 31.7" 18 20 61480 61400, 24" x 24" x 39.6" 22 23 61580 61500, 24" x 24" x 49.6" 26 27 61780 61700, 24" x 24" x 35.6" 20 21

Drawer Height Extensions• Removable drawer insert raises sidewall height to match drawer front.• Slotted sides allow use of taller partitions and subdividers. Net Ship Master Housing Size/ Wt. Wt. No. Drawer Front Height Lbs. Lbs. 91066 24" x 24"/6" 3 4 91067 24" x 24"/8" 3 4 91068 24" x 24"/10" 4 5 91069 24" x 24"/12" 6 7 91070 30" x 30"/6" 3 4 91071 30" x 30"/8" 4 5 91072 30" x 30"/10" 5 6 91073 30" x 30"/12" 7 8 91074 30" x 24"/6" 3 4 91075 30" x 24"/8" 4 5 91076 30" x 24"/10" 5 6 91077 30" x 24"/12" 7 6 91078 44" x 30"/6" 7 8 91079 44" x 30"/8"" 9 10 91080 44" x 30"/10" 11 12

Net Ship Master Cu. In. Load Wt. Wt. No. Description Cap. Cap. Lbs. Lbs. 63202 Adj Shelf for 30" x 30" Cabinet 15 16 64202 Adj Shelf for 44" x 30" Cabinet 23 24 62202 Adj Shelf for 30" x 24" Cabinet 12 13 61202 Adj Shelf for 24" x 24" Cabinet 10 11 63302 Pull Out Shelf for 30" x 30" Cab 550 20 21 64302 Pull Out Shelf for 44" x 30" Cab 550 28 29 62302 Pull Out Shelf for 30" x 24" Cab 550 16 17 61302 Pull Out Shelf for 24" x 24" Cab 220 13 14 63305 Pull Out Shelf with Gussets for 30" x 30" Cab 550 20 21 64305 Pull Out Shelf with Gussets for 44" x 30" Cab 550 28 29 62305 Pull Out Shelf with Gussets for 30" x 24" Cab 550 16 17 61305 Pull Out Shelf with Gussets for 24" x 24" Cab 220 13 14 99001 Bottom Shelf for 30" x 30" Cab 19 20 99004 Bottom Shelf for 44" x 30" Cab 29 30 99003 Bottom Shelf for 30" x 24" Cab 15 16 99002 Bottom Shelf for 24" x 24" Cab 12 13

Fork Lift Bases• Bolt easily onto cabinet.• Come with front covers.• Height, 2.4"H.

Net Ship Master Fork Lift Base Wt. Wt. No. Description Lbs. Lbs. 99616 For 24" x 24" Cabinets 21 22 99626 For 30" x 24" Cabinets 29 30 99636 For 30" x 30" Cabinets 26 27 99646 For 44" x 30" Cabinets 35 36

Net Ship Master Pallet Truck Base Wt. Wt. No. Description Lbs. Lbs. 99716 For 24" x 24" Cabinets 13 14 99726 For 30" x 24" Cabinets 29 30 99736 For 30" x 30" Cabinets 34 35 99746 For 44" x 30" Cabinets 35 36

Pallet Truck Bases• Bolt easily onto cabinet.• Come with front covers.• Height, 4"H.

Panel Brace SupportsBraces attach to work station and toolboard panels. Two brace supports are required per two panel set.

Net Ship Master Bottom Support Dimensions (Inches) Wt. Wt. No. Brackets Length Height Lbs. Lbs. 99541 For 30" x 30" Cabinet 25.6 3.5 6.5 7 99543 For 30" x 30" Cabinet 25.6 5 9 9.5 99540 For 30" x 24" Cabinet 20 3.5 4.5 5 99542 For 30" x 24" Cabinet 20 5 7 7.5

Bottom Support Brackets• Secures up to five NC/CNC tool trays into drawer. (Tool trays shown below).• Bolts to drawer bottom.• Set includes two brackets and hardware.

Angle Brackets• Includes one left hand and one right hand angle bracket and mounting hardware.• 6" W x 8" D x 4.5" H.• Net Wt. .4 lbs. Ship Wt. 1 lbs.• Model 50054

Two 50050 braces with panel set 50002TX (Back view).

Panel Brace Support• Includes one brace and mounting hardware.• 371/2" W x 3" D x 1" H.• Net Wt. 5 lbs.• Ship Wt. 5.5 lbs.• Model 50050


70059 socket for #30 taper tool holders. Also Cat V#3, Morse 3. Up to seven sockets will fit 70060 tool tray.

70067 socket for #35 taper tool holders. Also, Cat V#3, Morse 4. Up to seven sockets will fit 70060 tool tray.

70051 socket for #40 taper tools. Also, Cat V#4. Up to seven sockets will fit 70060 tool tray.

70052 socket for #45 taper tools. Also, Morse 5. Up to six sockets will fit 70060 tool tray.

70053 socket for #50 taper tool holders. Also, Cat V#5. Up to five sockets will fit 70060 tool tray.

70100 socket for straight shank tools up to 1.2" dia. (30 mm). Up to ten sockets will fit 70060 tool tray.

70064 socket for straight shank tools up to 1.4" dia. (36 mm) TR36. Up to seven sockets will fit 70060 tool tray.

70063 socket for straight shank tools up to 1.5" dia. (40 mm). Up to seven sockets will fit 70060 tool tray.

70056 socket for straight shank tools up to 1.75" dia. (44.4 mm). Up to six sockets will fit 70060 tool tray.

70065 socket for straight shank tools up to 1.97" dia. (50 mm). Up to six sockets will fit 70060 tool tray.

70057 socket for straight shank tools up to 2" dia. (50.8 mm). Up to six sockets will fit 70060 tool tray.

70066 socket for straight shank tools up to 2.4" dia. (60 mm). Up to six sockets will fit 70060 tool tray.

Plastic sockets are designed to secure

and protect Modular Quick Change Units

Kennametal KM®

Plastic Sockets

70030 KM32 1.75" W x 4" D x 1"HUp to 8 will fit a tray




Sandvik Capto™ System Plastic Sockets

71103 C31.75" W x 4" D x 1"HUp to 8 will fit a tray





70090 socket without holes, for special sized tools. Holes up to 1.2" can be drilled. Up to eight sockets will fit 70060 tool tray.

70092 socket without holes, for special sized tools. Holes up to 2.25" can be drilled. Up to six sockets will fit 70060 tool tray.

70094 socket without holes, for special sized tools. Holes up to 3.5" can be drilled. Up to five sockets will fit 70070 tool tray.

70096 socket without holes, for special sized tools. Holes up to 3.7" can be drilled. Up to four sockets will fit 70070 tool tray.

HSK-A System Sockets

70020 HSKA 25 1.75" W x 4" D x 1"HUp to 8 will fit a tray






70026 HSKA 100 Fits Tray 70070 only4" W x 4" D x 1"HUp to 5 will fit a tray

70027 HSKA 125 Fits Tray 70070 only5.3" W x 4" D x 1"HUp to 4 will fit a tray

Machine Cabinets can be custom-designed. The example at the right includes:• Model 63400 30" x 30" modular cabinet housing• Model 63302 pull-out shelf• One 4" drawer and two 12" drawers• Four 76209 socket partitions• Plastic sockets

It is highly recommended that modular cabinets be bolted to the floor to prevent tipping and serious injury.

NC/CNC PLASTIC SOCKETSKennedy plastic sockets are of high quality, break resistant plastic. Shockproof ABS plastic sockets firmly support and protect tool holder shanks. Sockets are available for standard tapers, Morse tapers and straight shank tool holders. All plastic sockets are available in red only.

45

The CutterKart™Pre-configured CutterKarts come with four metal and ABS plastic tool holder plates. Made of 18 gauge steel.

CutterKart™Facts and Features:

Includes four metal and ABS plastic toolholder plates.

5 x 2" roller bearing casters, two rigid and two swivel with brakes, roll across the roughest floors with ease.

The ToolKart™Pre-configured ToolKarts come with six frames and plastic sockets. Additional tool frames, plastic sockets and trolley accessories must be added separately. Made of 18 gauge steel.

• Pre-configured trolley holds up to 42 #30 taper tools.• Model 73030

• ToolKart only. • Includes tubular end handle and 5 x 2" roller bearing caster set.• Model 72001



• Sturdy socket frame bolts to end walls of ToolKart.• Holds up to 11 #30 taper tools.• Model 70062

Net Ship Master Dimensions (Inches) Load Wt. Wt. No. Width Depth Height Cap. Lbs. Lbs.73030 29 24 38 1,200 80 8673040 29 24 38 1,200 80 8673050 29 24 38 1,200 80 8672001 29 24 38 1,200 9 1070062 1,200 3 3.3

ToolKart™Facts and Features:

ToolKarts include sturdy metal socket frames that hold a variety of sockets. Order pre-configured cart and add ad-ditional socket frames and toolholders as your storage requirements change.Or, custom-design your own ToolKart™.

5 x 2" roller bearing casters, two rigid and two swivel with brakes, roll across the roughest floors with ease.

• Pre-configured trolley holds up to 56 #40 taper tools.• Weight capacity of 1,200 lbs.• Model 73240

• Pre-configured trolley holds up to 40 #50 taper tools.• Weight capacity of 1,200 lbs.• Model 73250

Net Ship Master Dimensions (Inches) Load Wt. Wt. No. Width Depth Height Cap. Lbs. Lbs.73240 29 24 38 1,200 80 8673250 29 24 38 1,200 80 86

46

Product # Description Page #1022 22"CantileverToolBox....................................................2010350 StorageCabinet...............................................................2810351 StorageCabinetShelf......................................................2810490 Pro-LineCanopy.............................................................. 1610491 Pro-Line39"7-DrawerMaintenanceCart......................... 1610492 Pro-Line39"13-DrawerMaintenanceCart...................... 1610493 Pro-Line39"12-DrawerMaintenanceCart...................... 1610494 Pro-Line41"13-DrawerMaintenaceCart........................ 1610495 Pro-Line41"12-DrawerMaintenaceCart........................ 16182X 2-ShelfLocker(BB)......................................................... 12185 5-DrawerSideCabinet..................................................... 13185X 5-DrawerSideCabinet(BB)............................................ 1320200 BenchmarkSeries6-DrawerCabinet................................5202X 2-ShelfLocker(BB)......................................................... 12205 5-DrawerSideCabinet..................................................... 13205X 5-DrawerSideCabinet(BB)............................................ 1321040 34"4-DrawerCabinet:HighSecurityLock....................... 1221041 34"4-DrawerCabinet:CombinationLock........................ 1221042 34"4-DrawerCabinet:ElectronicLock............................ 12220 2-DrawerPortableChest.................................................202600 ChestRiser...................................................................... 182602 2-DrawerMechanic'sChestBase.................................... 182603 3-DrawerMechanic'sChestBase.................................... 182604 4-DrawerMechanic'sChestBase.................................... 18263 3-DrawerMechanic'sChest............................................. 18266 6-DrawerMechanic'sChest............................................. 182705X 27"5-DrawerMechanicsChest(BB).......................... 18-19273 27"3-DrawerCabinet...................................................... 11273X 27"3-DrawerCabinet(BB).............................................. 11275 27"5-DrawerCabinet...................................................... 11275X 27"5-DrawerCabinet(BB).............................................. 11277 27"7-DrawerCabinet....................................................... 11277X 27"7-DrawerCabinet(BB)............................................... 112805X 29"5-DrawerMechanicsChest(BB)............................... 19285X 27"5-DrawerMechanicsChest(BB)............................... 19286X 6-DrawerBenchCabinet..................................................222905X 29"5-DrawerMechanicsChest(BB).......................... 18-192907MP MaintenanceProSeries29"7-DrawerCabinet..................82912MP MaintenanceProSeries29"12-DrawerTopChest............82905MP MaintenanceProSeries29"5-DrawerTopChest..............828085 5-DrawerStainlessSteelCabinet....................................3028087 7-DrawerStainlessSteelCabinet.....................................302812 12-DrawerMechanic'sChest........................................... 1828197 7-DrawerStainlessSteelCabinet.....................................30285 27"5-DrawerMechanicsChest................................. 18-1929000 CabinetPlasticWorkSurface..........................................302902 2-DrawerMechanic'sChestBase.................................... 18295 29"5-DrawerCabinet...................................................... 11295X 29"5-DrawerCabinet(BB).............................................. 11297 29"7-DrawerCabinet....................................................... 11297X 29"7-DrawerCabinet(BB)............................................... 11300MP MaintenanceProSeries2-ShelfSideLocker....................8302X IndustrialSeries2-ShelfSideLocker(BB)...................... 123905MP MaintenanceProSeries39"5-DrawerChest....................9305X IndustrialSeries5-DrawerMaintenanceChest(BB)....... 14306MP MaintenanceProSeries6-DrawerSideCabinet...............8306X IndustrialSeries6-DrawerSideCabinet(BB)................. 13310X IndustrialSeries10-DrawerMaintenanceCart(BB)........ 14315X IndustrialSeries15-DrawerMaintenanceCart(BB)........ 143400MP MaintenanceProSeries34"5-DrawerChest....................73407MP MaintenanceProSeries34"7-DrawerCabinet..................73412MP MaintenanceProSeries34"12-DrawerChest..................7348X IndustrialSeries34"8-DrawerCabinet(BB)................... 12360 10-DrawerMechanic'sChest........................................... 183611 11-DrawerMachinists'Chest............................................ 19376X IndustrialSeries27"6-DrawerCabinet(BB)................... 11378X IndustrialSeries27"8-DrawerCabinet(BB)................... 12380MP MaintenanceProSeries2-ShelfSideLocker....................8382MP MaintenanceProSeries6-DrawerSideCabinet...............8382X IndustrialSeries2-ShelfLocker(BB)............................... 12386X IndustrialSeries6-DrawerSideCabinet(BB)................. 133900MP MaintenanceProSeries39"8-DrawerCabinet.................939100MP MaintenanceProSeries39"Canopy.................................940001 HybridModularCabinetHousing.....................................4040002-08 DrawerForHybridModularCabinets..............................4040095 5-DrawerHybridModularCabinet...................................4040096 6-DrawerHybridModularCabinet...................................4040097 7-DrawerHybridModularCabinet....................................4040200 BenchmarkSeriesFull-HeightSideLocker.......................5415 5-DrawerVersaCart....................................................... 13415X 5-DrawerVersaCart(BB)................................................ 13435 5-DrawerVersaCart....................................................... 13435X 5-DrawerVersaCart(BB)................................................ 134200MP MaintenanceProSeries42"12-DrawerCart.....................74202MP MaintenanceProSeries42"7-DrawerChest.....................742001 DrDividerSetsforHybridModCabinets.........................4042002 DrDividerSetsforHybridModCabinets.........................4042003 DrDividerSetsforHybridModCabinets.........................4042004 DrDividerSetsforHybridModCabinets.........................4042005 DrDividerSetsforHybridModCabinets.........................4042010 MobilePackageforHybridModCabinets........................404405MP MaintenanceProSeries44"5-DrawerChest....................94410MP MaintenanceProSeries44”10-DrawerCart.....................946000 BenchmarkSeries46"8-DrawerChest.............................446003 BenchmarkSeries46"11-DrawerCabinet.........................446101 BenchmarkSeries46"Canopy..........................................44804 4-DrawerVersa-Bench.....................................................224806 6-DrawerVersa-Bench.....................................................224810 10-DrawerVersa-Bench...................................................2250002 2-PanelToolboardSet......................................................2650004 4-PanelToolboardSet......................................................2650051 21"x16"ToolboardStorageBag.....................................2850052 16"x24"ToolboardStorageBag.....................................2850053 Push/PullHandle.............................................................27

Product # Description Page #50054 AngleBrackets.................................................................4350067 SingleSided2-PanelToolboard WithFrame......................................................................2750068 SingleSided3-PanelToolboard WithFrame......................................................................2750070 SingleSided2-PanelBenchmount ToolboardWithFrame......................................................2750081 ToolboardSystem5”x11/4”MobilePackage.................2750083 ToolboardSystem31/2”x11/4”MobilePackage...........2750100 OpenToolTrolley.............................................................2650102 OpenToolTrolleyWithHookSet......................................2650104 OpenToolTrolleyWithoutHookSet.................................2650230 WallMountedCabinetWithoutPanels.............................2850260 WallMountedCabinet......................................................2850301 MiniWorkshopCabinet....................................................2851002-10 NXDrawersFor24x24ModularCabinets.......................3251012 NXDrawersFor24x24ModularCabinets.......................3251014 NXDrawersFor24x24ModularCabinets.......................3251016 NXDrawersFor24x24ModularCabinets.......................325150 2-DrawerMachinists'ChestBase.................................... 1951902-08 LatchingDrawersforMobileModularCabinet.................41520 7-DrawerMachinists'Chest............................................. 1952103-10 FXDrawersFor30x24ModularCabinets........................3352112 FXDrawersFor30x24ModularCabinets........................3352114 FXDrawersFor30x24ModularCabinets........................3352116 FXDrawersFor30x24ModularCabinets........................335220 20"All-PurposeToolBox..................................................20526 8-DrawerMachinists'Chest............................................. 1952611 11-DrawerMachinists'Chest............................................ 1953000 BenchmarkSeries53"7-DrawerChest.............................453001 BenchmarkSeries53"11-DrawerCabinet.........................45300MP MaintenanceProSeries53"12-DrawerCart.....................75302MP MaintenanceProSeries53"8-DrawerChest....................753101 BenchmarkSeries53"Canopy..........................................45350MP MaintenanceProSeries53"Canopy.................................756601 FixedRiserShelf(60”WorkTop).....................................3956607 Side/BackRetainerSet(60”WorkTop)...........................3956608 Side/BackRetainerSet(72”WorkTop)...........................3956721 FixedRiserShelf(72”WorkTop).....................................395804MP MaintenanceProSeries58"12-DrawerCart.....................860000 BenchmarkSeries60"7-DrawerChest.............................46006 60”6-DrawerVersa-Bench...............................................2360101 BenchmarkSeries60”TopCanopy...................................460121 BenchmarkSeries60”11-DrawerCabinet.........................46012E 60”12-DrawerVersa-Bench.............................................236012S 60”12-DrawerVersa-Bench.............................................2363002-06 NXDrawersFor30x30ModularCabinets.......................3661202 AdjustableShelf...............................................................4361203 24X245-DrawerMobileModularCabinet......................4161280 ModularCabinetDoors....................................................4361290 24X24MobileModularCabinetHousing.......................4161300 24X24ModularCabinetHousing...................................3261302 PullOutShelf...................................................................4361303 24X245-DrawerModularCabinet.................................3261305 PullOutShelfW/Gussets...............................................4361380 ModularCabinetDoors....................................................4361400 24X24ModularCabinetHousing...................................3261407 24X247-DrawerModularCabinet..................................3261480 ModularCabinetDoors....................................................4361500 24X24ModularCabinetHousing...................................3261509 24X249-DrawerModularCabinet.................................3261580 ModularCabinetDoors....................................................4361700 24X24ModularCabinetHousing...................................3261703 24X246-DrawerModularCabinet.................................3261750 24X248-DrawerMobileModularCabinet......................4161759 24X24MobileModularCabinetHousing.......................4161780 ModularCabinetDoors....................................................43620 3-DrawerMachinists'Chest............................................. 1962202 AdjustableShelf...............................................................4362302 PullOutShelf...................................................................4362305 PullOutShelfW/Gussets...............................................4362400 30X24ModularCabinetHousing...................................3362407 30x247-DrawerModularCabinet..................................3362500 30X24ModularCabinetHousing...................................3362509 30x249-DrawerModularCabinet..................................3362580 ModularCabinetDoors....................................................4362600 30X24ModularCabinetHousing...................................3362610 30x2410-DrawerModularCabinet................................3362780 ModularCabinetDoors....................................................4363008 NXDrawersFor30x30ModularCabinets.......................3663103-10 FXDrawersFor30x30ModularCabinets........................3663112 FXDrawersFor30x30ModularCabinets........................3663114 FXDrawersFor30x30ModularCabinets........................3663116 FXDrawersFor30x30ModularCabinets........................3663202 AdjustableShelf...............................................................4363302 PullOutShelf...................................................................4363303 30x30x404-DrawerMachineCabinet..........................3463305 PullOutShelfW/Gussets...............................................4363350 30X305-DrawerMobileModularCabinet.....................4163359 30X30MobileModularCabinetHousing.......................4163380 ModularCabinetDoors....................................................4363400 30X30ModularCabinetHousing...................................3663405-12 30x30x40ModularCabinets........................................3463416-19 30x30x40ModularCabinets........................................3463480 ModularCabinetDoors....................................................4363600 30X30ModularCabinetHousing...................................3663605-6 30x30x6013-DrawerModularCabinet........................3563609-12 30x30x60ModularCabinets........................................3563616-21 30x30x60ModularCabinets........................................3563680 ModularCabinetDoors....................................................4363902-08 LatchingDrawersforMobileModularCabinet.................4164103-10 FXDrawersFor44x30ModularCabinets........................3864112 FXDrawersFor44x30ModularCabinets........................3864114 FXDrawersFor44x30ModularCabinets........................38

Product # Description ................................................................. Page #64116 FXDrawersFor44x30ModularCabinets...........................3864202 AdjustableShelf...................................................................4364302 PullOutShelf.......................................................................4364305 PullOutShelfW/Gussets...................................................4364400 44X30ModularCabinetHousing......................................3864404 44x306-DrawerModularCabinet......................................3764408 44x3010-DrawerModularCabinet....................................3764410 44x307-DrawerModularCabinet......................................3764480 ModularCabinetDoors........................................................4364600 44X30ModularCabinetHousing......................................3864606 44x3013-DrawerModularCabinet....................................3764608 44x3010-DrawerModularCabinet....................................3764610 44x306-DrawerModularCabinet......................................3764680 ModularCabinetDoors........................................................4366200 AdjustableLegs...................................................................3966606 Footrest...............................................................................3966726 Footrest...............................................................................3969104 ModularWorkStation..........................................................3969146 ModularWorkStation..........................................................3969148 ModularWorkStation..........................................................3970020-71108 NC/CNCPlasticSockets.....................................................4470062 SocketFrame......................................................................4572001 ToolKart...............................................................................4573030 ToolKart...............................................................................4573040 ToolKart...............................................................................4573050 ToolKart...............................................................................4573240 CutterKart............................................................................4573250 CutterKart............................................................................4576209 SocketPartition...................................................................3499020 HybridDrawerPartition.......................................................4091066-80 DrawerHeightExtenders....................................................4391102-91344 DrDividerSetsfor24x24ModularCabinets.......................3292122-92744 DrDividerSetsfor30x24ModularCabinets.......................3393102-93774 DrDividerSetsfor30x30ModularCabinets.......................3695213-95644 DrDividerSetsfor44x30ModCabinets.............................3896002-07 PlasticGrooveTrays/Dividers..............................................4296008-150 PlasticBoxes/BoxSets........................................................4299001-04 BottomShelf........................................................................4399032-34 Partitions.............................................................................4299042-44 Partitions.............................................................................4299053-54 Partitions.............................................................................4299103-04 Subdividers..........................................................................4299122-24 Subdividers..........................................................................4299143-44 Subdividers..........................................................................4299162-64 Subdividers..........................................................................4299182-84 Subdividers..........................................................................4299202-04 Subdividers..........................................................................4299222-24 Subdividers..........................................................................4299225 HybridDrawerSubdivider...................................................4099242-44 Subdividers..........................................................................4299262-64 Subdividers..........................................................................4299265 HybridDrawerSubdivider...................................................4099282-84 Subdividers..........................................................................4299289-91 Subdividers..........................................................................4299302-04 Subdividers..........................................................................4299305 HybridDrawerSubdivider...................................................4099322-24 Subdividers..........................................................................4299325 HybridDrawerSubdivider...................................................4099342-44 Subdividers..........................................................................4299503 Subdividers..........................................................................4299505 Subdividers..........................................................................4299540-43 BottomSupportBrackets.....................................................4399616-46 ForkLiftBase......................................................................4399716-46 PalletTruckBase.................................................................4399814 RedMagneticSheets..........................................................2799815 BlueMagneticSheets.........................................................2799816 WhiteMagneticSheets........................................................2799817 YellowMagneticSheets.......................................................2799820-25 SingleHookToolholder........................................................2999827-30 DoubleHookToolholder......................................................2999831-32 PlierHookToolholder..........................................................2999833-36 SingleSpringClipToolholder..............................................2999839 RinkHookToolholder..........................................................2999840 ScrewdriverToolholder........................................................2999841 WrenchRackToolholder......................................................2999842 AllenKeyToolholder............................................................2999847 PartsShelfToolholder.........................................................2999848 PlasticBinStorageStripToolholder....................................2999851 10PcToolholderSet............................................................2999852 30PcToolholderSet...........................................................2999853 60PcToolholderSet...........................................................2999876 CableLoopHookToolholder...............................................29DO26 SecurityDoor......................................................................24DR264X 4DrawerPackage...............................................................24DR265X 5DrawerPackage...............................................................24DS1 FoldAwayCabinetShelf...................................................... 12K20 20"ToolBox.........................................................................20K24 24"ToolBox.........................................................................20MC22 2DrawerMachinists'ChestBase........................................ 19MC28 2DrawerMachinists'ChestBase........................................ 19S5405X 5DrawerWorkStationSteelTop.........................................24S5410X 10DrawerWorkStationSteelTop.......................................24TS261X 1DrawerToolStand............................................................24TS265X 5DrawerToolStand............................................................24VBLEG StationaryLegs...................................................................22W5405X 5DrawerWorkStationMapleTop.......................................24W5410X 10DrawerWorkStationMapleTop.....................................24WC28 WallStorageCabinet...........................................................24WT48 MapleWorkSurface............................................................23WT60 MapleWorkSurface............................................................23WT6030 MapleWorkSurface............................................................39WT7230 MapleWorkSurface............................................................39

Kennedy CatalogRevision 05-12

KMC002

1260 INDUSTRIAL DRIVE

VAN WERT, OH 45891

Toll Free: 1.800.413.8665 • Local: 419.238.2442 • Fax: 419.238.5644

www.kennedymfg.com

kennedy

Documents

howard kennedy

kennedy branded products

long kennedy

metal suitcase

kennedy manufacturing

kennedy product line

metal tackle box

metal mechanics box