kemet - gulfincon€¦ · now a truly international organisation, kemet’s activities span the...
TRANSCRIPT
PRECISION CLEANING SYSTEMS
Kemet
ULTRASONIC CLEANERS & EQUIPMENT 1-8
CLEANING TRIALS & TECHNICAL SUPPORT
11-12
CLEANING FLUIDS 9-10
Cleaning Chemicals & Fluids 9Industrial Degreasers 10Waste Water Treatment 10
Telephone: +44(0)1622 607507 Sales Desk - Direct Line+44(0)1622 755287 Enquiries & Technical Support
Email: [email protected]
Website: www.kemet.co.uk
Fax: +44(0)1622 670915
Post Kemet International Ltd Cuxton Road, Parkwood Trading Estate, Maidstone, Kent ME15 9NJ, UK
Contents Ordering Information
Catalogue version: 1511
Multistage Automatic Line 1-2Modular Cleaners 3Closed Loop Filtration Systems 4Mould Cleaners 5Stencil & PCB Cleaners 6Bespoke Cleaning Systems 7Benchtop Cleaners 8
Free Cleaning Trials to find your perfect solution
Distributors for...
4
BSI Assurance Mark
BSI [email protected] BSI Assurance Mark | January 2015
BSI Assurance Marks.Here are some of the BSI Assurance Marks
Kemet Cleaning Systems
Since 1938, Kemet has been at the forefront of precision polishing
technology, producing quality diamond pastes and composite lapping /
polishing materials in our purpose built facilities. Experience has taught
us that cleaning is an integral part of the final process, allowing parts to be
accurately inspected prior to use.
To ensure the optimum cleaning process for specific contaminants and
materials, Kemet have established strategic partnerships with world
leading companies in ultrasonic cleaning, aqueous based cleaning fluids
and water treatment. Together, we have developed a comprehensive
range of products and processes that cover most applications, but, if
necessary, we will research and develop a bespoke cleaning process for
a specific challenge.
All of our systems are designed for use with aqueous detergents, which
are more environmentally friendly than solvents. Aqueous fluids
also produce stronger ultrasonic cavitation action than solvents. As the UK
distributor for NGL fluids, Kemet has access to over 300 cleaning solutions
and waste water treatment. Free cleaning fluid trials can be arranged to
find the perfect solution.
Now a truly international organisation, Kemet’s activities span the world
spearheaded by companies in nine countries, all sharing the same
commitment to customer support. This, along with more than 75 years’
experience, means that Kemet are able to provide you with the technical
support to overcome all your cleaning challenges.
Advances in technological development set ever higher requirements for component cleanliness in today’smanufacturing industries. The Versa Genius represents the 3rd generation of the popular Versa range. It boasts many features as well as innovative Genius ultrasonic technology. The Versa Genius offers a perfect match with your requirements for cleanliness, productivity and EHS (Environmental, Health and Safety).
Versa Genius - Smart solution for component cleaning inmanufacturing industries
Main benefits• Modular - flexible process
configuration for optimal cleaning result
• Compact - small footprint• Smart - high productivity
combined with excellent EHS
Main characteristics• Tank sizes from 50 to
140 litres• Load capacity up to 35 kg• Washing, rinsing and drying
modules• Bath maintenance modules• Process automation and
material handling modules
Features• Enhanced cleaning
performance• Flexible• Easy to use• Energy efficient• Safe• Reliable• Easily serviced
Main applications• Automotive• Metal• Machinery• Electronics• Aviation• Maintenance• Medical
Flexible process configuration, optimal cleaning resultThe Versa Genius cleaning line offers washing, rinsing and drying modules and additional options. Its scope can range from single manually operated units to a fully automated multi stage line. Versa Genius sets new standards in design with thoughtful details in fluid connections, agitation and control features to give a more functional, flexible and energy efficient system.
Ultrasonic Cleaners
1Kemet.co.uk
VER
SA G
ENIU
S IND
USTR
IAL U
LTRA
SON
IC C
LEAN
ERS
Main improvementsCleaning performance
• Increased JETpower
Flexibility• Dedicated connections for closed loop circulation
Usability• Operating panel in ergonomic and comfortable angle• Sloping tank base - effective draining
Energy efficiency• Immersion heaters• Cost savings, environmentally friendly
Safety• Automated and manual handling options increase
operator safety
Reliability• Improved adjustable dunking design• Increased mechanical clearance and component lifetime
Serviceability• All components readily available
Genius ultrasonic technology• Automatic adaptation of generator parameters - constant
maximum performance.• Fully digital technology - fast and energy efficient• Advanced diagnostics - performance monitoring and
service capabilities
Standard features • Heating and thermal insulation• Perimeter lip on tank edge and drip plates between stages -
contain drips and keeps machine clean• Filling and draining valves - easy bath change• Sloping tank base - effective draining• Overflow weir with valve - enables surface skimming• Dedicated connections for closed loop filter circulation• Adjustable feet - alignment on uneven floors
Technical informationVersa
Genius 50Versa
Genius 90Versa
Genius 140
Basket dimensions (internal) (mm) 415 x 220 x 195(h) 545 x 295 x 310(h) 540 x 400 x 360(h)
Module dimensions (external) (mm) 505 x 772 x 917(h) 580 x 900 x 917(h) 690 x 900 x 917(h)
Tank dimensions (mm) 365 x 517 x 335(h) 438 x 645 x 430(h) 548 x 645 x 490(h)
Max load (kg) 10 20 35
Filling volume (l) 45 94 140
Heating power (W) 2000 3000 3000
Ultrasonic power nom/peak (W)* 600/1200 1200/2400 1200/2400
Ultrasonic frequency (kHz)** 30 30 30
Booster/Sweep/ Degas Yes Yes Yes
Filling valve R ½” R ½” R ½”
Drain valve R 1” R 1” R 1”
Overflow weir/ valve Yes / R 1¼” Yes / R 1¼” Yes / R 1¼”
Voltage (VAC) 380/220 - 415/240
380/220 - 415/240
380/220 - 415/240
Connected load (W) 4000 5000 5000
Control system • Treatment time and temperature control• Dry running protection• 7-day timer - automatic pre-heating• 3 memory slots - store favorite settings• External control interface - easy
integration with robotized production cells
* Transducers bonded to tank base. Side transducer versions available.**40 kHz also available. 2
Kemet.co.uk
Mi Range - Peak performance cleaning for demanding partsAchieve the required cleanliness specification with an Mi single or multistage modular cleaning system and fit the cleaning process to your production with the Mi’s versatile control system.
MI R
AN
GE
OF
ULT
RA
SON
IC C
LEA
NER
S
Technical information M40I M80I M120I M160I M160I2400
Volume (I) 40 80 120 160 160
External dimensions mm 640 x 390 x 540 760 x 460 x 720 740 x 580 x 750 1340 x 460 x 770 1340 x 460 x 770
Tank dimensions mm 460 x 265 x 300 585 x 330 x 400 585 x 450 x 450 1180 x 330 x 400 1180 x 330 x 400
Wash basket dimensions mm 420 x 225 x 225 540 x 290 x 340 540 x 400 x 390 1110 x 280 x 300 1110 x 280 x 300
Ultrasonic power W nom./peak 600/1200 1200/2400 1200/2400 1200/2400 2400/4800
Ultrasonic frequency (kHz)* 30 30 30 30 30
Heating power (W) 1500 2000 4000 6000 6000
Voltage (V/Hz) 230/50 230/50 (230)/400/50 (230)/400/50 (230)/400/50
Filling valve R 1/4 R 1/4 R 1/4 R 1/4 R 1/4
Drain valve R 3/4 R 3/4 R 3/4 R 3/4 R 3/4
Overflow weir/ valve R 3/4 R 3/4 R 3/4 R 3/4 R 3/4
Connecting load (W) 2100 3200 5200 7200 8400
* 40 kHz also available.
Storage tank Closed loop oilseparation system
Closed loop par ticle/oil filtration with P2S bag filter.Closed loop par ticle filtration 20” car tridge filter.
Optional
Manage your cleaning process with the Mi’s easy to use control system. With the Mi you can:
• Maintain an effective work day schedule with 7 day timer for control of heating on/off requirements.
• Activate treatment from your own PLC with the external control feature.
• Maintain the process integrity by controlling maximum temperature during the entire cleaning process.
• Optimise process with the temperature interlock, ensures that temperature cannot be changed from the panel and the process will not begin before set temperature is reached.
• Program selection from memory according to part cleanliness requirement.
• Options include stands, side transducers, hinged lids and much more accessories.
3Kemet.co.uk
CLO
SED LO
OP
FILTRA
TION
SYSTEM
S
Closed Loop Filtration SystemsA range of fluid handling options help achieve the required cleanliness level and cut operating costs. The closed loop filtration and oil removal options increase the life of wash and rinse liquids whilst providing more consistent cleaning results.
Free oil can be removed from the wash liquid by a storage tank with an oil separation system while a spray bar enables effective surface skimming to the overflow weir.
Closed loop filtration 20”
Particle filtration (Closed loop circulation: treatment tank > pump > filter > treatment tank)External dimensions (mm) - 510 x 340 x 1100 (h)Filling volume (l) - 5Temperature range - Ambient - 80°CPump - Centrifugal pump Grundfos CM 3-4, 1-phase, 15 - 65 l/min, 2 bar, Seal AQQE. Slide valve for flow adjustment.Filter Vessel - 20” cartridge, Pressure gauge, Isolation valves, Drain valve, Vent screw(1 pc 50 micron 20” cartridge filter included in delivery)
Closed loop filtration P2S
Particle filtration (Closed loop circulation: treatment tank > pump > filter > treatment tank)External dimensions (mm) - 510 x 330 x 1100 (h)Filling volume (l) - 32Temperature range - Ambient - 80°CPump - Centrifugal pump Grundfos CM 3-4, 1-phase, 15 - 65 l/min, 2 bar, Seal AQQE. Slide valve for flow adjustment.Filter Vessel - P2S bag, Pressure gauge, Isolation valves, Drain valve, Vent valve(1 pc 50 micron P2S filter bag included in delivery)
Closed loop rinse water regeneration
Organics removal by active carbon and demineralization by ion exchange resin(Closed loop circulation: treatment tank > pump >active carbon > ion exchange resin > treatment tank)External dimensions (mm) - 1020 x 340 x 1100 (h)Filling volume (l) - 2x 32Temperature range - Ambient - 60°CPump - Centrifugal pump Grundfos CM 3-4, 1-phase, 5 l/min, 2 bar, Seal AQQE. Slide valve for flow adjustment.Filter Vessel - 2 x P2S bag, Pressure gauges, Isolation valves, Drain valvesVent valves (One charge of active carbon and ion exchange resin included in delivery)
Closed loop circulation without filter housing
Closed loop circulation: treatment tank > pump > treatment tankExternal dimensions (mm) - 510 x 340 x 600 (h)Filling volume (l) - 2Temperature range - Ambient - 80°CPump - Centrifugal pump Grundfos CM 3-4, 1-phase, 15 - 65 l/min, 2 bar, Seal AQQE. Slide valve for flow adjustment. Pressure gauge
4Kemet.co.uk
MO
ULD
ULT
RA
SON
IC C
LEA
NIN
G
Ultrasonic cleaning and maintenance of moulds reduces manual input and wear resulting in large cost savings. The technique is perfect for plastic, rubber and die cast moulds and tools.
Process Benefits
• Short wash process reduces cleaning time• No operator required while the machine is
cleaning the mould• High level of cleanliness gives longer life
in production• No abrasion of precision edges and surfaces
offers longer mould life• Aqueous process - No solvents needed• Suitable for all sizes of moulds
Features and Benefits
• Stainless steel construction (AISI 304)• Thermal and noise insulation• Surface skimming of liquid • Weir in wash tank• Low fluid level cut off protection• Thermostat controlled heating• Drain valve• Water inlet valve• Work support grill*• Cascade water refill*• Rim lip ventilation channels on all stages*• Protective guide rails*• Submersible transducer boxes* 800 model only
Options
Available with integrated flushing and drying station with rotating platform.
Notes: Materials used specified in the table below. Materials not specified are compatible with the chemicals specified for each tank. Electrical components used in the equipment are of well-known brands with common availability on the world market.
Mould Ultrasonic Cleaning
Technical information
MCT-360J/I MCT-360J/II MCT-360J/III
Model 40 80 800
Max. load (kg) 800 800 800
Liquid volume per tank ca. (l)
330 tank 1330 tank 1 390 tank 2
330 tank 1 390 tank 2-3
Ultrasonic power in tank 1 (Watts nom/peak)
3600/7200 3600/7200 3600/7200
Ultrasonic frequency (kHz)
27 27 27
Heating power (kW) 9 tank 19 tank 1, 5 tank 2
(optional)
9 tank 1 5 tank 2 (optional)
5 tank 3
Effective tank dimensions (mm)
700 x 500 x 700 700 x 500 x 700 700 x 500 x 700
External dimensions LxWxH (mm)
1062 x 1435 x 1400
1926 x 1435 x 1400
2790 x 1435 x 1400
Weight (kg) 330 470 610
Drain valve 1 x R1¼ ” 2 x R1¼” 3 x R1¼”
Water inlet valve 1 x R½” 2 x R½” 3 x R½”
Spray bar valve R3/8” tank 1 R3/8” tank 1 R3/8” tank 1
Weir with valve 1 x R1¼” 2 x R1¼” 3 x R1¼”
Compressed air 4-6 bar
R¼” (optional) R¼” R¼”
Ventilation connection
Ø153 mm, 800 m3/h, Only tank 1
Connected load (kW)
1313
18 (optional)18
23 (optional)
Mains voltage 3-phase 400VAC 50Hz, PE, N5 m connection cable with marked wires
Component or subassembly
AISI 304 AISI 316 Steel Plastics
Tanks
Framework
Encapsulation
U/S transducers
Heating elements
Liquid valves
Piping
Electric control cabinet
5Kemet.co.uk
STENC
IL & P
CB
ULTR
ASO
NIC
CLEA
NIN
G
Stencil & PCB Ultrasonic CleaningHigh Level Cleanliness in Electronics Production
Powerful stencil cleaning and circuit board cleaning methods leading to excellent, repeatable results in a short time, without damaging the part.
• 29” x 29” Stencil cleaners• PCB defluxers• Cleaners for manufacturing tools
and equipment
Equipped with guide rails for 29” frame stencils to prevent damage. Ultrasonic treatment time is set and started using the control panel. Spray rinse function is switched on after the ultrasonic treatment is complete and the lid is opened. As operator lifts stencil slowly out (automatic lift is available as option) spray nozzles, at two long tank edges, rinse the part with filtered liquid from the wash tank (tank heating is provided for avoiding foaming during spray stage). Drying stand to dry out stencil is placed (air knifes are available as option). Closed loop circulation runs after the cycle to filter out particles from wash liquid.
Technical information
SBC
External dimensions 1010 x 718 x 1010 mm (H)
Connected load 3.1 kW
Voltage 220 - 240 VAC, 50 Hz
Amps 14.1 A
Weight 160 kg
Compressed air R ½“ 5-7 bar, dry and filtered
Noise level <70 dBA +3dBA
Liquid Water based, non-aggressive
Material AISI 304
Liquid capacity 113 l
Thermal insulation Plastic foam
Temperature range 20 - 80°C
Tank effective dim. For 29” x 29” stencil (736.6 x 736.6 mm)
Lid Hinged lid with EPDM seal and condense catch
Heating 1 kW, Indirect heating with plate type heating element
Temperature control PT100
Temperature range 20 - 80°C
Level control/alarm Float switch as dry run protection
Filling Manual valve R1/2”
Draining Manual valve R1”
Stencil support Guide rails for placing 29” frame stencil directly in tank
Drying stand 2 pc support points inside tank and 1 pc above tank
Technical information
SBC
Ultrasonic agitation
1200 / 2400 W nominal / peak40 kHz, Sweep functionTransducers bonded to the front wall of the tank covering area of 570 x 480 mm
Closed loop circulation
Centrifugal pump Grundfos CM 3-4, 1-phase, 15 - 65 l/min, 2 bar, Seal AQQE. Slide valve for flow adjustment. Stainless steel filter vessel for 20” cartridge with pressure gauge, isolation valves, drain valve and vent screw
Spray rinsing
Spray nozzles on two long sides at tank edge. Solenoid valves for automatic switching of flow between closed loop circulation and spray. Slide valve for flow adjustment. Splash guards
6Kemet.co.uk
KEM
ET B
ESP
OK
E A
QU
EOU
S SY
STEM
S A
ND
SER
VIC
ES
Kemet Bespoke Aqueous Systems and Services
In addition to the range of standard systems, Kemet can design and produce bespoke systems to suit your application.
Ranging from a robust single unit to a multi tank, automated ultrasonic cleaning system, Kemet can provide a solution to meet any, or all, of the following requirements:
• High production capacity• Easy handling of heavy objects• Good operator safety (e.g. Processes using
aggressive chemicals)
We have a team of Technical Representatives throughout the UK who can advise on Kemet’s cleaning range and capabilities including:
• Extensive range of concentrated detergents• Kemet’s own chemists, to give advice• Factory Acceptance testing, commissioning
and training• Test and demonstration either on site or
at Kemet’s facilities• Cleaning Specialists• Servicing contracts
Kemet can offer you automated systems including cleaning, drying, fluid handling and other options. Automated Basket transporters can handle loads of up to 1000 kg.
Different models for single, multi or simultaneous parts handling are available depending on the load and capacity requirements.
Custom built industrial cleaning machines are used for production cleaning of practically any component shape or material. These systems are of stainless steel construction and offer full encapsulation for operator safety and a better working environment.
7Kemet.co.uk
KEM
ET ULTR
ASO
NIC
CLEA
NER
S FOR
PR
ECISIO
N C
LEAN
ING
Kemet Light-Industrial Ultrasonic Cleaners for Precision Cleaning
Technical information Kemet 3 Kemet 6 Kemet 12 Kemet 30
Tank service volume (l) 1.9 4.3 9 20.6
Internal tank dimensions (mm) 240 x 137 x 100 300 x 150 x 150 300 x 240 x 200 505 x 300 x 200
Internal basket dimensions (mm) 198 x 106 x 50 255 x 115 x 75 250 x 190 x 115 455 x 250 x 115
External dimensions (mm) 300 x 179 x 214 365 x 186 x 264 365 x 278 x 321 568 x 340 x 321
Ultrasonic power nom/peak (W) 80/160 150/300 200/400 300/600
Ultrasonic frequency (kHz) 38 38 38 38
Heating power (W) 200 400 800 1200
Product Code 359480 359482 359484 359486
Top of the range digital generator operates piezo-ceramic transducer elements giving a powerful cleaning effect. The Booster function, for extra power, can be used for the most difficult cleaning tasks. Distribution of the ultrasonic energy is achieved by the frequency sweep to give precision cleaning throughout the tank. All models are equipped with thermostatically controlled heating to ensure optimum cleaning temperature.
Manufactured from DIN 304 stainless steel, both internally and externally, they are easy to keep clean and hygienic. A drip protector guides any unwanted water droplets away from the operating panel and the internal control circuitry is protected against water splash.
Features• Tank made from stainless steel (DIN 304) • High quality stainless steel mesh basket • Boost, Sweep and Degassing function• Easy setting of time, temperature and
special functions• Dry run heating protection and automatic
switch off after 12 hours of operation• Glass beaker system available for cleaning
small parts
Accessories Available Kemet 3 Kemet 6 Kemet 12 Kemet 30
Plastic lid
Stainless steel basket
Lid/beaker holder
Set: lid/beaker holder, 2 beaker glasses 600ml with lid and rubber rings
Beaker Ø 95 mm, 600 ml
Beaker Ø 95 mm, 1000 ml
8Kemet.co.uk
TypePackage
SizeProduct
CodeAlkaline or Acid
PH approx
Dilution % Suggested
Temp °C Suggested
Inhibitor Suggested Use Comments
H14
5 Kg 360474
Strong Alkaline
143-30%,
Suggest 15%60-85°C
85°C optimum
Mould cleaning, carbon removal,
Steels, Ceramics / Glass
Powerful detergent. Will etch or attack non-ferrous
materials. Steel may disco-lour at high temperature
20 Kg 360475
210 Kg 360476
ACA1 Kg 361470 Very Light
Alkaline10 0.5-3%
Ambient to 40°C
Yes, Main Purpose
Inhibitor in rinse to prevent corrosion
Stops corrosion on ferrous metals25 Kg 361469
S3
1 Litre 361281
Very Mild Acid
2.5 10-15% 40-70°C
Tarnish, light corrosion of most
materials. Brightens jewellery and coins
Protect ferrous materials after cleaning. Not suitable
for some plated metals5 Litre 361282
25 Litre 361283
I
5 Kg 360480
Acid 15-10%,
Start at 5%25-60°C
Start 25°C
Rust and oxide removal on all
materials. Restore white ceramics
Will etch all materials and brighten some non-ferrous. Cold rinse, dry immediately.
Protect ferrous
20 Kg 360481
210 Kg 360482
M99 21 Litre 360486 - - 100%<75°C (Flash Point 97°C)
Yes
Dewatering. Removes water moisture,
provides corrosion protection
Dewatering fluid for moulds / parts going into storage. Immerse / drain over tank
C160 25 Litre 302117 - - 100%<120°C (Flash Point 158°C)
Removing waxes, grease, polishes, lap
compounds
High temp solvent. Use heated dip tanks.
Ultrasonics can be rinsed with aqueous
TypePackage
SizeProduct
CodeAlkaline or Acid
PH approx
Dilution % Suggested
Temp °C Suggested
Suggested Use Comments
Helit Plus5-litre 362963
Alkaline 7.8 3-5% 40-70°CUniversal, neutral for
Jewellery, Watch parts, Luxury items.
Non tarnishing will brighten, removes oils buffing
compounds.25-litre 362964
Galvex SU 7375-litre 362988
Alkaline 8 3-5% 50-75°CUniversal, neutral for all
metals, Watch parts, etc.
Removes polishing compounds, good in hard /
soft water25-litre 362989
Galvex SU 7475 -litre 362938
Alkaline 10 1-3% 50-80°CSlightly stronger version of
737. IE: Watch cases, straps etc. S.Steel & Gold
Removes polishing com-pounds, good in hard /soft
water25-litre 362939
Galvex 17:30N 25-litre 362942 Alkaline 10 3-5% 50-80°CSuitable for most metals but
test first. Adds corrosion protection to steels
Removes oil & polishing componds and general
contamination
Galvex 18:01 25-litre 362944 Alkaline 9.5 3-5% 50-75°CGeneral purpose on all Metals. Also on Plastic
machine cases
Removes polishing componds and general
contamination. Free Rinsing.
Galvex 17:3025-litre 362940
Alkaline 10 1-2% 50-80°CGeneral purpose on all
Metals. Cleaning prior to plating /coating
Removes oil & polishing componds and general
contamination200-litre 362941
Rodacleen Supra
25-litre 363010 Alkaline 12.5 3-5% 60-70°CSurface preparation on: Ce-
ramics, titanium, steel HSS & hard metal prior to P.V.D.
Removes grinding & lapping paste. Might need Rodastel 30 to neutralise and assist
rinsing.
Rodaweg 25-litre 363007 Alkaline 12.7 2-4% 30-75°CMetal surfaces prior to
Vacuum Coating. Can be used at 30° C
Removes oil & polishing componds from steel & hard
surfaces
Decoclean 440 25-litre 362945 Alkaline 13 5-15% 50-80°CHeavy contamination on
Ferrous metals only. Ultrasonic or Spray
Do not use on Non-ferrous metals. Rinse well.
Rodastel 30 25-litre 362947 Acidic 2 3-5%Ambient to
60°CDeoxidation, neutralise prior
to Vacuum Metallisation.
Low acidic not classed as hazardous. Will shine
copper alloys
Solvit 3 25-litre 362946 Acidic 23-10% Ultra-sonic 10-30%
Dip
Ambient to 45°C
Oxide, oils, carbon and polishing compounds from all
metals.
Strong acidic action. Rinse well or, neutralise after use.
Kemet Cleaning ChemicalsKemet offer the finest in biodegradable cleaning fluids. These are specialist formulated concentrated detergents available in neutral, alkaline and acid types. Kemet are a distributor of NGL Nordic A/S with more than 300 high performance formulations providing a solution to most cleaning challenges. Some of the more commonly used solutions are as follows:
9Kemet.co.uk
Distributor
HA
ND
CLEA
NIN
G SO
LUTIO
NS &
WA
STE WA
TER TR
EATM
ENT
Size Container Code
450ml Trigger Spray 302103
5 Litres Metal 302102
25 Litres Metal 302101
200 Litres Metal 302105
Size Container Code
500ml Aerosol 302114
500ml Aerosols (Pk 12) 302115
Industrial DegreasersDasty Industrial Degreaser For hand cleaning, this product is extremely effective for thoroughly degreasing all mechanical parts as well as large surfaces and perfect for cleaning lapping residue. Thanks to its ultra-concentrated formula, Dasty easily removes grease, mineral oil, scale, etc. and is biodegradable, safe for shipping and contains no ozone depleting chemicals.
C70 Solvent Cleaning FluidA versatile and highly efficient cleaning and degreasing fluid with a fast evaporation rate for removing grease, oil and residues from all metals and ceramics. Supplied in a pressurised container, complete with detachable extended spray tube for reaching into the most difficult areas, C70 contains no ozone depleting substances.
CO - 42 Cleaning Fluid Designed for cold use and applied by spray, brush, cloth or full immersion, CO42 is a highly efficient degreasing fluid similar in performance to 1.1.1 Trichloroethane, but without the ozone depleting properties.
• C70 and CO-42 are NOT approved for use at elevated temperatures or in ultrasonic cleaning machines.
Size Code
1 Litre 362936
Box of 12 362962
Waste Water TreatmentThrough our partnership with NGL, Kemet offer a wide range of water treatment options to process water coolants and polishing liquids. This enables fluid recycling and improves the quality of the surface of machined parts, producing a discharge that complies with local environmental requirements.
Treatment methods• Physico-chemical which use chemical reactants to concentrate
contaminants in the form of settleable and/or filterable sludge.• Physical: membrane filtration, centrifugation, evapo-concentration
Services• On-site assessment• Compliance for existing treatment installations• Treatment process proposal in partnership with OEMs• Development and commercialization of a specific range of chemical
reactants (DECOFLOC range)
10Kemet.co.uk
At our dedicated cleaning test centre in Kent, we have the latest demonstration and test facilities to develop cleaning processes tailor made to the customer’s requirements. We are able to undertake free of charge cleaning trials using a large variety of cleaners and solutions.
We provide a complete technical support programme as part of the Kemet package. In the UK, our team of Technical Representatives is always on hand to offer advice and assistance. Internationally, our world-wide network of Kemet subsidiary companies and exclusive distributors have fully qualified technicians and engineers to help solve your ultrasonic cleaning problems.
We have access to NGL’s Laboratories where their chemists study, formulate, develop and manufacture cleaning solutions. They offer cleaning solutions for include watch parts, jewellery, silverware, medical, micro-mechanics, electronics, electroplating, vacuum deposits and ophthalmic optics, sun lenses and precision optics.
• Preliminary tests, results and checks save time in the development of customer projects
• Process validation and approval• Guidance and assistance in preparing
specifications for an equipment investment
11Kemet.co.uk
Technical Support
At Kemet, we pride ourselves on finding the ideal cleaning solution for each customer based on their individual needs. If you would like to arrange cleaning trials with us please call +44(0) 1622 755287
Below are a few examples of our FREE cleaning tests.
Before AfterPlastic Welding Wire Liner cleaned
Injection Mould cleaned Aircraft Hydraulic Pipe Line cleaned
Injection Mould cleaned
Before After
Fuel and Hydraulic Blanking Plugs cleaned Injection Mould Plate cleaned
Diesel particulates filter cleaned Die Cast Moulds cleaned
12Kemet.co.uk
Technical Support Free Cleaning Trials
Kemet
Kemet International Ltd. Subsidiary CompaniesSingapore
Kemet Far East Pte Ltd
MalaysiaKemet Precision (M) SDN BHD
Kemet Products are available through a worldwide Network of Authorised Distributors inEurope
AsiaAfricaU.S.A
Middle EastAustralasia
Kemet International Ltd, Parkwood Trading Estate, Maidstone, Kent ME15 9NJ, United Kingdom Tel: +44 (0) 1622 755287 Fax: +44 (0) 1622 670915
[email protected] www.kemet.co.uk
NetherlandsKemet Europe B.V
ChinaKemet China Ltd
Japan / KoreaKemet Japan / Kemet Korea
AustraliaKemet Australia Pty Ltd