kat 115 127 g5 usa 2011 - hettich · contemporary design with a generous choice of five drawer...
TRANSCRIPT
173173
MultiTechSteel drawer system
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 173
Special drawer height for us under the hob.
Inside drawers – extremely practical behind front panels.
MultiTech
. . . an impressive product range with a price/performance ratio tailored to your customer base
A choice of intelligent accessoriesto enhance any MultiTech drawer
system and fit for your application– in kitchens or living areas.
Partial and full extension runners for up to 100 lbs K.C.M.A. total load – for smoothservice every day, year after year.
174 www.hettich.com
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 174
Contemporary design with a generouschoice of five drawer heights, for theperfect storage solution.
Good looks, wide , choice , top quality
Technik für Möbel 175
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 175
End-user benefits typical of up-market drawer systems
The free-spinning rollers are quiet,require no maintenance and run trueeven under heavy loads.
The self-closing feature closes front panels flush against the unit.The perfect parallel drawer actionallows elegant hairline reveals.
Full extension pan drawers open and close smoothly thanks to easyroller action.
Double-stop detent for safe routine handling. Can also be used to hold an open drawer securely in position.
High drawer sides forplenty of storage space
176 www.hettich.com
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:41 Uhr Seite 176
MultiTech
. . . all the way to final assembly
Simple 3-dimensional front panel adjustment (± 2 mm cam height adjustment,
± 1,5 mm side adjustment, front panel angel via railing).Side panel leaves factory in zero position.
Fast front panel assembly using left/right-compatible front connectors(separate left/right connectors forinside pan drawers).
± 2 mm ± 1,5 mm
Drawers are easy to insert and remove.
± 2 mm ± 1,5 mmclick
177Technik für Möbel
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 177
178 www.hettich.com
Industrial packing
Industrial packing
Drawer set contains:Drawer profile left/right �Drawer slide left/right �
MultiTech 54Steel profile system for variable drawer widthswith self closing
System benefits
• 2 1/8” (54 mm) height• Variable drawer width• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left
�
�
�
�
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 660 9 050 661 2514”/350 9 050 662 9 050 663 2516”/400 9 050 664 9 050 665 2518”/450 9 050 666 9 050 667 2520”/500 9 050 668 9 050 669 2522”/550 9 050 670 9 050 671 25
Article Order no. PU
Front connector, screw-on left 1 064 336 100Front connector, screw-on right 1 064 341 100
� Drawer slidepowder-coated steel, white
� Front connector, screw-onnickel-plated die cast zinc
Rear mounting bracket for face frame cabinetsplastic
Distributor packing
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
Drawer set, height 2 1/8” (54 mm), whitepartial extension
Article Order no. PU
Front connector, screw-on left / right 079 174 10 sets
Article Order no. PU
Front connector, knock-in left 1 064 578 100Front connector, knock-in right 1 064 579 100
� Front connector, knock-innickel-plated die cast zinc
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 079 173 10 sets
Length Order no. PUinch/mm
10”/250 050 001 10 sets14”/350 050 003 10 sets16”/400 050 005 10 sets18”/450 050 007 10 sets20”/500 050 009 10 sets22”/550 050 011 10 sets
��
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 178
179Technik für Möbel
Drawer front panel
32
Mounting example for partial extension
Front connector drilling position
Dimensions
12,5
7,5
8,5
32
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth =nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 39
16 ±1 15
9
18,5
12
49
min. 24
min. 5
16
3954
64
Chipboard screw ø 3,5
Wooden back panel
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Bottom panel width + 14
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 179
180 www.hettich.com
Drawer set, height 33/8” (86 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 86Steel profile system for variable drawer widthswith self closing
System benefits
• 33/8” (86 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 619 9 050 620 2514”/350 9 050 623 9 050 624 2516”/400 9 050 627 9 050 628 2518”/450 9 050 631 9 050 632 2520”/500 9 050 635 9 050 636 2522”/550 9 050 639 9 050 640 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 013 10 sets –14”/350 050 015 10 sets –16”/400 050 017 10 sets 051 401 6 sets18”/450 050 019 10 sets 051 403 6 sets20”/500 050 021 10 sets 051 405 6 sets22”/550 050 023 10 sets 051 407 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Distributor packing
Industrial packing
Industrial packing
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
� Front connector, knock-innickel-plated steel
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Corner connector for internal drawerwhite plastic
�
�
�
�
�
�
�
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
Article Order no. PU
Corner connector for internal drawerleft / right 051 487 10 sets
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 180
181Technik für Möbel
64
X
61
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 71
Wooden back panel =inside cabinet width - 32
Wooden front panel =inside cabinet width - 58
Bottom panel depth =nominal length - 19
71
Inside cabinet width
15
8671
16
18,5
32
min.5
81
min. 249
16±1
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
15
8671
16
18,5
32
min.5
49
9
16±1
min. 56
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
18 86
9
71
34,5
Partial extension Full extension
Countersunk screw ø 3,5
Mounting example for partial extension
Dimensions drawer
Mounting example for full extension
Mounting example for inside drawer
Bottom panel width = insidecabinet width - 32
Wooden back panel = 71
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Front connector drilling position
7,5
64
8,5
12,5
ø10±0,1
ø10±0,1
Dimensions inside drawer
64
Drawer front panel
Bottom panel width + 14
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 181
182 www.hettich.com
Drawer set, height 4 5/8” (118 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 118Steel profile system for variable drawer widthswith self closing
System benefits
• 4 5/8” (118 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 750 9 050 739 2514”/350 9 050 754 9 050 753 2516”/400 9 050 760 9 050 759 2518”/450 9 050 764 9 050 763 2520”/500 9 050 768 9 050 767 2522”/550 9 050 770 9 050 769 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 033 10 sets –14”/350 050 035 10 sets –16”/400 050 037 10 sets 051 417 6 sets18”/450 050 039 10 sets 051 419 6 sets20”/500 050 041 10 sets 051 421 6 sets22”/550 050 043 10 sets 051 423 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
� Front connector, knock-innickel-plated steel
�
�
�
�
�
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 182
183Technik für Möbel
64
X
103
16
18,5
64
min.5
113
min. 249
1516±1
118
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
103
16
18,5
64
min.5
81
9
1516 ±1
118
min. 56
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screwø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
Mounting example for partial extension
DimensionsMounting example for full extension
Front connector drilling position
7,5
64
40,5
12,5
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel = 103
64
Drawer front panel
Bottom panel width + 14
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 183
184 www.hettich.com
Drawer set, height 6” (150 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 150Steel profile system for variable drawer widthswith self closing
System benefits
• 6” (150 mm) height• 6 lengths: 10”/14”/16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
10”/250 9 050 709 9 050 710 2514”/350 9 050 711 9 050 712 2516”/400 9 050 713 9 050 714 2518”/450 9 050 715 9 050 716 2520”/500 9 050 717 9 050 718 2522”/550 9 050 719 9 050 720 25
Length Order no. PU Order no. PUinch/mm partial extension full extension
10”/250 050 053 10 sets –14”/350 050 055 10 sets –16”/400 050 057 10 sets 051 433 6 sets18”/450 050 059 10 sets 051 435 6 sets20”/500 050 061 10 sets 051 437 6 sets22”/550 050 063 10 sets 051 439 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
10”/250 9 050 685 9 050 686 10014”/350 9 050 687 9 050 688 10016”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 10022”/550 9 050 695 9 050 696 100
� Front connector, knock-innickel-plated steel
�
�
�
�
�
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 184
185Technik für Möbel
64
X
150135
16
min. 5
96
18,5
9
1516 ±1
min. 24
145
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
150135
16
113
min. 5
96
18,5
9
1516 ±1
min. 56
Chipboard screw ø 3,5
Pan-head screw ø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Woodenback panel
Mounting example for partial extension
Dimensions Mounting example for full extension
Front connector drilling position
12,5
7,5
64
72,5
ø10 ±0,1
ø10 ±0,1
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel= 135
64
Drawer front panel
Bottom panel width + 14
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 185
186 www.hettich.com
Drawer set, height 8 3/8” (214 mm), white
Drawer set contains:� Drawer profile left/right� Drawer slide left/right, only with partial extension set� Drawer slide, middle profile and pullout prevention,
only with full extension set
MultiTech 214Steel profile system for variable drawer widthswith self closing
System benefits
• 8 3/8” (214 mm) height• 4 lengths: 16”/18”/20”/22”• Partial extension and full extension• Load capacity 100 lbs K.C.M.A.
� Drawer profile� Drawer slide� Front connector right� Front connector left� Drawer slide, middle profile
and pullout prevention
� Drawer profilepowder-coated steel, white
Length Order no. PUinch/mm left right
16”/400 9 054 921 9 054 922 1018”/450 9 054 923 9 054 926 1020”/500 9 054 927 9 054 928 10
Length Order no. PU Order no. PUinch/mm partial extension full extension
16”/400 051 449 10 sets 051 465 6 sets18”/450 051 451 10 sets 051 467 6 sets20”/500 051 453 10 sets 051 469 6 sets22”/550 051 455 10 sets 051 471 6 sets
� Drawer slide, partial extensionpowder-coated steel, white
� Front connector, screw-onnickel-plated steel
Length Order no. PUinch/mm left right
16”/400 9 050 689 9 050 690 10018”/450 9 050 691 9 050 692 10020”/500 9 050 693 9 050 694 100
� Front connector, knock-innickel-plated steel
�
��
��
�
�
Distributor packing
Industrial packing
Industrial packing
Article Order no. PU
Front connector, screw-on left / right 054 997 20
Article Order no. PU
Front connector, screw-on left / right 9 052 273 200
Distributor packing
Article Order no. PU
Front connector, knock-in left / right 054 998 20
Article Order no. PU
Front connector, knock-in left / right 9052 275 200
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 186
187Technik für Möbel
199
16
209
min. 5
160
18,5
9
1516 ±1
96
min. 24
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
214
199
16
177
min. 5
160
18,5
9
1516 ±1
min. 56
96
Chipboard screw ø 3,5
Pan-head screwø 4,5 x 12
Pan-head screw ø 4,5 x 12
Inside cabinet width
Euro screw countersunk
Mounting example for partial extension
Dimensions
Mounting example for full extension
Front connector drilling position
12,5
7,5
64
136,5
ø10 ±0,1
ø10 ±0,1
64
Wooden back panel = inside cabinet width - 32
Bottom panel depth= nominal length - 3
Inside cabinet width
Bottom panelwidth = insidecabinet width - 32
Wooden back panel= 199
64
Drawer front panel
Bottom panel width + 14
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 187
188 www.hettich.com
MultiTechPot-and-pan drawerSteel profile system for variable drawer widths
Railing for pot-and-pan drawerwhite
Length Order no. PUinch/mm left right
18”/400 1 064 372 1 064 377 10020”/450 1 064 375 1 064 378 10022”/500 1 064 376 1 064 379 100
Front connector for railingpremounted knock-in screw,clear plastic
Article Order no. PU
Front connector for railing 1 061 965 400
System benefits
• 2 1/8” (54 mm), 3 3/8” (86 mm), 4 5/8” (118 mm), 6” (150 mm) or 8 3/8” (214 mm) drawers can be expanded to pot-and-pan drawers with a railing set
• Steel profile with roller runners as partial extension slide or full extension slide with self-closing feature
• Load capacity 100 lbs K.C.M.A.• 3 nominal drawer lengths: 18”/20”/22” (450/500/550 mm)• Finish: white• Variable pot-and-pan drawer widths• Quick drawer insertion and removal• Simple assembly and front panel adjustment• One-sided constrained guidance
The following components are all you need for assembling a MultiTech pot-and-pan drawer:
Distributor packing
• Drawer set, full extension slide orpartial extension slide+ Front connectors(see page 178 to 187)
• Railing set (see below)
Industrial packing� Drawer profile left / right� Drawer slide left / right� Front connector right� Front connector left� Railing for pot-and-pan drawer Front connector for railing
Industrial packing
Industrial packing
Railing-Set for pot-and-pan drawerwhite
contains:� Railing for pot-and-pan drawer Front connector for railing
Distributor packing
Article Order no. PU
Railing-Set 450 mm 051 481 10 setsRailing-Set 500 mm 051 483 10 setsRailing-Set 550 mm 051 485 10 sets
�
�
�
�
�
�
Rear mounting bracket for face frame cabinetsplastic
Article Order no. PU
Rear mounting bracket left 052 101 600Rear mounting bracket right 052 102 600
Recommended screw no. 6
�
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 188
189Technik für Möbel
9
18,5
32
16
12,5
Mounting example Front connector/railing drilling position
12,5
8,5
ø10 ±0,1
ø10 ±0,1
ø10 ±0,1
6,5
Y
Y = Back panel height +bottom panel thickness – 6,5 mm
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 189
190 www.hettich.com
MultiTech Accessories
Article Order no. PU
Practica universal angle stop 078 093 1
Article Order no. PU
Practica drilling template 079 637 1
Article Order no. PU
Sleeve drill ø 10 mm 078 096 1Spare drill ø 10 mm 079 005 1
Article Order no. PU
Insertion die for MultiTech 54 079 566 1MultiTech 86/118/150 and 214 040 129 1
Rear Mounting Bracket forMultiTechThe rear mounting bracket is especially designed for face frame construction as well as applications not using a full center panel.Positive fit between slide and bracket eliminates "twist-out" between parts.Interference between bracket and drawer box impossible.Elongated slots provide both horizontal and vertical adjustment.Attachment can be by screw or staples.Min. support 30 mm, max. support 86 mm.
Marking gauge Practica for MultiTech drawers/pot-and-pan drawerThe MultiTech front panel gauge (universal angle stop and drillingtemplate) makes it easy to drill holes in any required position for fixing the front panel to the drawer/pot-and-pan drawer.
Article Finish Order no. PU
Assembly jig blue 064 820 1
Article Order no. PU
Mounting tool for MultiTech 54 079 564 1MultiTech 86/118/150 and 214 040 133 1
Assembly jigfor simple, fast and precise assembly of MultiTech cabinet runners
Insertion die for front connectorsfor Blue Max mini and Blue Max 6/8/19
Mounting toolfor knock-in assembly of front connectors
Article Finish Order no. PU
Rear mounting bracket left plastic 052 101 600Rear mounting bracket right plastic 052 102 600
Recommended screw no. 6
KAT_173_190_G5_USA_2011.qxd 16.11.2011 14:42 Uhr Seite 190