kapsch gsm training
TRANSCRIPT
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Version 1.1
Kapsch CarrierCom
Page 2 Training Catalogue GSM and GSM-R Products
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 3
1. Introduction ..................................................................................................................................
Table of contents
5 1.1. About Kapsch CarrierCom AG ....................................................................................................... 5 1.2. Our Training Philosophy ................................................................................................................. 5 1.3. Standard courses and customized workshops .............................................................................. 5 1.4. Contact ........................................................................................................................................... 6
2. Curriculum .................................................................................................................................... 7
3. Overview Courses ........................................................................................................................ 8 GSMR01 GSM / GSM-R Overview ................................................................................................................ 8
4. BSS Courses................................................................................................................................. 9 GSMR02 GSM / GSM-R Radio Access Network ........................................................................................... 9 BTS01 BTS 6000 / 9000 Basic Operations and Maintenance ................................................................. 10 BSC01 BSC / TCU 3000 Basic Operations and Maintenance ................................................................. 11 MSS01 MSS Basic Operations and Maintenance .................................................................................... 12 BSS01 BSS Advanced Operations and Maintenance .............................................................................. 13
5. NSS Courses............................................................................................................................... 14 GSMR03 GSM / GSM-R Voice Core Network ............................................................................................. 14 MSS01 MSS Basic Operations and Maintenance .................................................................................... 15 MG01 MG 15000 Advanced Operations and Maintenance .................................................................... 16 G9-01 G9 Basic Operations and Maintenance ....................................................................................... 17 G9-02 G9 Advanced Operations and Maintenance ................................................................................ 18 ATCA01 ATCA Basic Operations and Maintenance .................................................................................. 19 ATCA02 HLR Advanced Operations and Maintenance .............................................................................. 20 ATCA03 MSC-S / VLR Advanced Operations and Maintenance ............................................................... 21 CBM01 CBM Basic Operations and Maintenance .................................................................................... 22 USP01 USP Basic Operations and Maintenance ..................................................................................... 23 ERS01 ERS 8600 Basic Operations and Maintenance ............................................................................ 24 WNMS01 Wireless NMS............................................................................................................................... 25
6. GPRS Courses ............................................................................................................................ 26 GSMR04 Introduction to GPRS ................................................................................................................... 26 ASR01 ASR 5000 Basic Operations and Maintenance ............................................................................ 27
Kapsch CarrierCom
Page 4 Training Catalogue GSM and GSM-R Products
ASR02 SGSN / GGSN Advanced Operations and Maintenance ............................................................. 28
7. IN Courses .................................................................................................................................. 29 SCP01 GSM-R SCP 4.0 Basics and Services ......................................................................................... 29 SCP02 GSM-R SCP 4.0 Advanced Operations and Maintenance .......................................................... 30
8. RPM Courses .............................................................................................................................. 31 RPM01 RPM Basics .................................................................................................................................. 31 RPM02 RPM Configuration Management ................................................................................................. 32 RPM03 RPM Subscriber Management ..................................................................................................... 33 RPM04 RPM OTA ..................................................................................................................................... 34 RPM05 RPM Administrator ....................................................................................................................... 35
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 5
1. Introduction
1.1. About Kapsch CarrierCom AG
Kapsch CarrierCom is a global system integrator and innovator of fixed, mobile, transportation and access networks solutions. The company provides an end to end service spectrum: from analysis and consulting, design and product development, integration and installation, to training, maintenance and support, as well as operation of complete networks. Kapsch CarrierCom is a global leader in the development of future technologies for service providers and has achieved world-wide market leadership in GSM-R digital wireless train communications. Among Kapsch CarrierCom's customers are some of the largest GSM-R railway operators in important markets such as France and Germany which has the world's largest GSM-R network.
1.2. Our Training Philosophy
Skilled and well-trained personnel are an important key item for progress and success. To meet this demand we offer a wide range of technology and product courses.
Our strength lies in the fact that the training, as well as every single trainer, is embedded in an environment of development, design, start-up and support. The trainers are involved in the development of new products and projects and can thus hand on their up-to-date know-how directly from the source to the training participants. This enables us to offer very practical courses.
Our in-house labs are available for courses in which the participants can learn and practice in a "live" environment. Of course, courses can also be held at your location.
1.3. Standard courses and customized workshops
In addition to the standard courses described herein, we offer courses and workshops which are customized to your requirements. Customization means that we are able to adapt the length and content of any standard course, and that we are also able to offer other trainings apart from the standard courses, for instance:
> GSM-R Applications and Features
> BSS Optimization Parameters
> BSS Performance Management
> BTS Installation and Integration Workshop
> BSC Installation and Commissioning Workshop
> Release Upgrade Workshop
> NOC Workshop
Kapsch CarrierCom
Page 6 Training Catalogue GSM and GSM-R Products
1.4. Contact
Since we mainly do project based trainings, we do not have a schedule with open courses throughout a year. If you're interested in a course of this catalogue or in a workshop tailored to your requirements, please send an e-mail to [email protected] or directly contact our training department:
Michaela Kratzer Training Administration
Kapsch CarrierCom AG Am Europlatz 5 | 1120 Vienna | Austria Phone +43 50 811 3525 | Mobile +43 664 628 3525 | Fax +43 50 811 3503 E-mail [email protected]
Ing. Werner Gross Head of Training
Kapsch CarrierCom AG Am Europlatz 5 | 1120 Vienna | Austria Phone +43 50 811 3290 | Mobile +43 664 628 3290 | Fax +43 50 811 3503 E-mail [email protected]
You will find further information about Kapsch CarrierCom on our homepage www.kapschcarrier.com.
Please also visit www.kapschcarrier.com/training, there you will find all current information about training and our complete course offer online.
An overview of the entire Kapsch Group can be found online at www.kapsch.net.
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 7
2. Curriculum
GSM
R02
GSM
/ G
SM-R
Ra
dio
Acc
ess
Netw
ork
2 da
ys
GSM
R03
GSM
/ G
SM-R
Voi
ce C
ore
Netw
ork
2 da
ys
GSM
R04
Intro
duct
ion
to
GPR
S
2 da
ys
MSS
01M
SS
Basi
c O
&M
3 da
ys
MG
01M
G 1
5000
A
dv. O
&M
3 da
ys
ATC
A01
ATC
ABa
sic
O&M
5 da
ys
CBM
01CB
MBa
sic
O&M
2 da
ys
USP0
1US
PBa
sic
O&M
3 da
ys
ATC
A02
HLR
A
dv. O
&M
3 da
ys
ATC
A03
MSC
-S /
VLR
A
dv. O
&M
7 da
ys
ERS0
1ER
S 86
00Ba
sic
O&M
3 da
ys
ASR
01A
SR 5
000
Basi
c O
&M
2 da
ys
ASR
02SG
SN /
GG
SNA
dv. O
&M
5 da
ys
BTS0
1BT
S 60
00/9
000
Basi
c O
&M
2 da
ys
BSC0
1BS
C/TC
U 30
00Ba
sic
O&M
2 da
ys
WNM
S01
W-N
MS
2 da
ys
GSM
R01
GSM
/ G
SM-R
O
verv
iew
3 da
ys
Ove
rvie
w / I
ntro
duct
ion
Basi
c O
pera
tions
and
Mai
nten
ance
Adv
ance
d O
pera
tions
and
Mai
nten
ance
BSS0
1BS
S A
dv. O
&M
8 da
ys
Lege
nd:
G9-
01G
9Ba
sic
O&M
2 da
ys
G9-
02G
9A
dv. O
&M
3 da
ys
RPM
01RP
M B
asic
s
1 da
y
SCP0
2G
SM-R
SCP
4.0
Adv
. OA
M
5 da
ys
RPM
02RP
M C
onfig
Man
agem
ent
1 da
y
RPM
03RP
M S
ubsc
riber
Man
agem
ent
2 da
ys
RPM
05RP
M
Adm
inis
trato
r
2 da
ys
RPM
04RP
M O
TA
0.5
days
SCP0
1G
SM-R
SCP
4.0
Basi
cs &
Ser
vice
s
5 da
ys
Kapsch CarrierCom
Page 8 Training Catalogue GSM and GSM-R Products
3. Overview Courses
GSMR01 GSM / GSM-R Overview
Course description This course provides a general introduction to mobile networks plus a few high-level technical details necessary for understanding GSM and GSM-R networks.
Audience Anyone interested
Prerequisites None
Duration 3 days
Method > Lecture
> Demonstration
Key Topics > The GSM and GSM-R story
> Architecture of mobile networks
> Basic functions of network elements
> Short description of the cellular principle, radio communication in general and the GSM-R radio interface
> How mobility is implemented
> Services (GSM and GSM-R)
> GSM-R mobile stations
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 9
4. BSS Courses
GSMR02 GSM / GSM-R Radio Access Network
Course description This course provides the participants with a description of GSM / GSM-R radio access networks. Also, basic technology topics of GSM based radio communications are covered.
Audience Anyone interested
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration
Key Topics > Network architecture
> Interfaces and protocol stacks
> Introduction to radio communications
− Wave, frequency, modulation, dB vs. dBm, C/I etc.
> The GSM radio interface
− TDMA structure and burst types, timing advance, frequency hopping, physical and logical channels, channel coding etc.
− Principles of cell planning and optimization
− Procedures (paging, channel request, measurements etc.)
> Short description of the BSS products
Kapsch CarrierCom
Page 10 Training Catalogue GSM and GSM-R Products
BTS01 BTS 6000 / 9000 Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain BTS 6000 and BTS 9000 Base Transceiver Stations used in GSM and GSM-R networks.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Introduction
> Hardware architecture (modules, RF cabling, redundancy, maintenance, timeslot config etc.)
> OAM interface (TIL)
> Trouble-shooting (TIL alarms, HW LEDs)
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 11
BSC01 BSC / TCU 3000 Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain BSC 3000 Base Station Controllers and TCU 3000 Transcoding Units used in GSM and GSM-R networks.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Modules and their functions
> OAM interface (TML)
> Trouble-shooting (TML alarms, HW LEDs)
Kapsch CarrierCom
Page 12 Training Catalogue GSM and GSM-R Products
MSS01 MSS Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Multiservice Switch (MSS) nodes used in GSM and GSM-R networks as PCUs resp. Media Gateways.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Hardware architecture (includes the PCUSN and MG 15000
configuration)
> Software evolution
> Component model and CLI command syntax
> Basic components (Time, Ns, Nmis, Ac, Col, Fs, Prov)
> Logical Processor (Lp) and Software (Sw)
> Alarms and State Change Notifications (SCNs)
> Testing of hardware components
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 13
BSS01 BSS Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a small GSM / GSM-R example radio network. Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 8 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Overview of the OMC-R system (servers, clients, interfaces,
documentation)
> Introduction to the OMC-R GUI
> Configuration management (provisioning of various objects, e.g. for cells, links, mobility, GPRS etc.)
> Software management
> Fault management
> Performance management
Kapsch CarrierCom
Page 14 Training Catalogue GSM and GSM-R Products
5. NSS Courses
GSMR03 GSM / GSM-R Voice Core Network
Course description This course provides the participants with a description of GSM / GSM-R voice core networks based on R99 and R4.
Audience Anyone interested
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration
Key Topics > Standardisation
> Network architecture
> Interfaces and protocol stacks
> Mobility Management (MM) procedures
> Connection Management (CM) procedures
> Handover procedures
> Supplementary Services (SS)
> Introduction to SS7
> Short description of the NSS products
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 15
MSS01 MSS Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Multiservice Switch (MSS) nodes used in GSM and GSM-R networks as PCUs resp. Media Gateways.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Hardware architecture (includes the PCUSN and MG 15000
configuration)
> Software evolution
> Component model and CLI command syntax
> Basic components (Time, Ns, Nmis, Ac, Col, Fs, Prov)
> Logical Processor (Lp) and Software (Sw)
> Alarms and State Change Notifications (SCNs)
> Testing of hardware components
Kapsch CarrierCom
Page 16 Training Catalogue GSM and GSM-R Products
MG01 MG 15000 Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a Media Gateway 15000. Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > MG15000 in R99 and R4 mobile networks
> Interfaces and protocol stacks
> Hardware
> Software
> Components and their hierarchy
> Traffic flow examples
> IP addressing, routing and forwarding
> Trouble-shooting
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 17
G9-01 G9 Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Genband G9 Media Gateways.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum, plus a basic knowledge of IP
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Hardware architecture, traffic flows and redundancy
> Applications and features
> Introduction to the Command Line Interface (CLI)
> Introduction to GenView EMS
Kapsch CarrierCom
Page 18 Training Catalogue GSM and GSM-R Products
G9-02 G9 Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a Genband G9 Media Gateway. Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > G9 in mobile networks
> Interfaces and protocol stacks
> Software architecture and maintenance
> Configuration management (media gateway and virtual media gateway nodes, office and system parameters, cards, physical interfaces etc.)
> Fault management
> Performance management
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 19
ATCA01 ATCA Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Advanced Telecommunications Computing Architecture (ATCA) nodes used in GSM / GSM-R networks as MSC Server, VLR and HLR.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 5 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Basic telecommunications concepts
> Call Server architecture based on the ATCA / VSE platform
> Hardware details
> Configuration examples for MSC-S and HLR applications
> Software layer
> Basic maintenance tasks using the CLI
> Maintenance tasks using MAPCI
Kapsch CarrierCom
Page 20 Training Catalogue GSM and GSM-R Products
ATCA02 HLR Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a HLR (Home Location Register). Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Subscriber tables
> Services
> Dialing plan
> MSISDN, MSRN, HON
> Call scenarios
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 21
ATCA03 MSC-S / VLR Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a MSC-Server including VLR functionality. Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 7 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Basic concepts of translations
> Datafill trunk group tables
> Datafill universal translations tables supporting all types of mobile calls
> Datafill translations tables to send specified calls to treatment
> Datafill VLR translations tables for Call Barring
> Datafill translations tables to route a call based on specific characteristics
> Datafill inter-MSC handover
> Check translation datafill using TRAVER
> Plan and build a customer database based on site specific information
Kapsch CarrierCom
Page 22 Training Catalogue GSM and GSM-R Products
CBM01 CBM Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Core and Billing Manager (CBM) systems used in GSM and GSM-R networks.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 2 days
Method > Lecture
> Demonstration
> Hands-on
Key Topics > Hardware architecture
> Software components
> Connectivity to other systems
> Basic O&M tasks
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 23
USP01 USP Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Universal Signalling Platforms (USPs) used in GSM and GSM-R networks.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > USP in signalling networks
> Hardware components
> Introduction to the GUI
> Datafill for SIGTRAN and SS7 (MTP, SCCP, GTT, IPS7)
> OMs, logs and system alarms
Kapsch CarrierCom
Page 24 Training Catalogue GSM and GSM-R Products
ERS01 ERS 8600 Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Ethernet Routing Switch (ERS) 8600 nodes used in GSM and GSM-R networks.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum, plus a basic knowledge of Ethernet and IP
Duration 3 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Hardware architecture
> Applications and features
> Command Line Interface (CLI)
> Software and file system
> Setting up a node from scratch
> Selected configuration tasks using CLI or Java Device Manager (JDM)
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 25
WNMS01 Wireless NMS
Course description In this course the participants will learn how to use the Wireless Network Management System (W-NMS) for managing GSM / GSM-R voice core systems.
Audience Personnel responsible for fault, configuration and performance management
Prerequisites See curriculum, plus a basic knowledge of core network components
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Overview of the W-NMS system (servers, clients, interfaces,
documentation)
> Introduction to the W-NMS GUI and tools
> Fault management
> Configuration management
> Performance management
> Security
Kapsch CarrierCom
Page 26 Training Catalogue GSM and GSM-R Products
6. GPRS Courses
GSMR04 Introduction to GPRS
Course description This course provides the participants with a description of GPRS (General Packet Radio Service).
Audience Anyone interested
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration
Key Topics > GPRS network architecture and protocol stacks
> TDMA structure of the radio interface
> Logical and physical channels used for GPRS
> Channel coding
> RLC/MAC packets and procedures
> Higher layer packets and procedures
> Short description of the GPRS products
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 27
ASR01 ASR 5000 Basic Operations and Maintenance
Course description This course provides the participants with the basic knowledge and skills to operate and maintain Aggregation Services Router (ASR) 5000 nodes used in GSM / GSM-R networks as SGSNs and GGSNs.
Audience Personnel requiring basic O&M skills
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key topics > Hardware architecture
> Software architecture
> Command Line Interface (CLI)
> File system
> Configuration files
> Software management
> Monitoring and trouble-shooting
> Setup a node from scratch
Kapsch CarrierCom
Page 28 Training Catalogue GSM and GSM-R Products
ASR02 SGSN / GGSN Advanced Operations and Maintenance
Course description In this course the participants will learn how to configure a combined SGSN / GGSN. Also, advanced operations and maintenance topics will be covered.
Audience Personnel responsible for configuration management and advanced O&M
Prerequisites See curriculum
Duration 5 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Interfaces and protocol stacks
> Hardware and software architecture
> Configuring SGSN services (Gb, Gn and Gr interface, DNS)
> Configuring GGSN services and contexts (Gn, Ga, AAA, corporate, Internet)
> Trouble-shooting
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 29
7. IN Courses
SCP01 GSM-R SCP 4.0 Basics and Services
Course description In this course the participants will learn how to use the SCP 4.0 Service Control Point (SCP) platform for the configuration of GSM-R IN services.
Audience Personnel responsible for the configuration of SCP services
Prerequisites See curriculum
Duration 5 days
Method > Lecture > Demonstration > Hands-on
Key Topics > SCP 4.0 basics
− Introduction to IN and GSM-R
− Basic GSM-R IN services (Follow Me and LDA)
− SCP hardware, software and documentation
− Unix/Linux operating system basics
− SCP GUI
> SCP 4.0 services
− Data management (tools and interfaces)
− Service features
− Service configuration data and TCR
− Provisioning exercise
Kapsch CarrierCom
Page 30 Training Catalogue GSM and GSM-R Products
SCP02 GSM-R SCP 4.0 Advanced Operations and Maintenance
Course description In this course the participants will learn how to operate and maintain an SCP platform. Also, supplementary modules and skills will be covered.
Audience Personnel responsible for advanced O&M
Prerequisites See curriculum
Duration 5 days
Method > Lecture > Demonstration > Hands-on
Key Topics > SCP operations and maintenance
− OAM GUI
− Operations (log system, audits etc.)
− File system
− Preventative maintenance
− Domain Manager (DM)
− Service Order Processing (SOP) and DM synchronization
− Trouble-shooting
− UserIDs and passwords
> Supplementary modules and skills
− Patching
− Protocol Translation Unit
− SIGTRAN configuration and trouble-shooting
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 31
8. RPM Courses
RPM01 RPM Basics
Course description This course provides the participants with an overview of the RPM (Railway Provisioning Manager).
Audience Anyone interested
Prerequisites See curriculum
Duration 1 day
Method > Lecture > Demonstration > Hands-on
Key Topics > RPM architecture
> Modules and their functionality
> RPM user interface
> Number directory
> Scheduling mechanism
Kapsch CarrierCom
Page 32 Training Catalogue GSM and GSM-R Products
RPM02 RPM Configuration Management
Course description In this course the participants will learn how to use the RPM (Railway Provisioning Manager) to configure basic GSM-R features.
Audience Personnel responsible for configuration management
Prerequisites See curriculum
Duration 1 day
Method > Lecture > Demonstration > Hands-on
Key Topics > Sites, cells and tracks
> Location Dependent Addressing (LDA)
> Group Call Areas
> Group Call Register
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 33
RPM03 RPM Subscriber Management
Course description In this course the participants will learn how to use the RPM (Railway Provisioning Manager) to configure GSM-R subscribers and their profiles.
Audience Personnel responsible for configuration management
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > MSISDN management
> Profile management
> Subscriber lifecycle management (activation, deactivation, SIM replacement etc.)
> SIM management
> SIM files that are configured by RPM
Kapsch CarrierCom
Page 34 Training Catalogue GSM and GSM-R Products
RPM04 RPM OTA
Course description In this course the participants will learn how to use the OTA (Over The Air) functionality of RPM (Railway Provisioning Manager).
Audience Personnel responsible for configuration management
Prerequisites See curriculum
Duration 0.5 day
Method > Lecture > Demonstration > Hands-on
Key Topics > RPM setup for OTA
> SIM card parameters for OTA
> Differences between SIM writer configuration and OTA configuration
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 35
RPM05 RPM Administrator
Course description In this course the participants will learn how to administrate the RPM (Railway Provisioning Manager).
Audience Personnel responsible for the administration of the RPM
Prerequisites See curriculum
Duration 2 days
Method > Lecture > Demonstration > Hands-on
Key Topics > Management of RPM users and their roles
> Configuration of RPM parameters
> Management of the RPM database
> Backup of RPM data and the RPM database
> Management of an RPM cluster (optional)
Kapsch CarrierCom
Page 36 Training Catalogue GSM and GSM-R Products
intentionally blank
Kapsch CarrierCom
Training Catalogue GSM and GSM-R Products Page 37
Date: 12.12.2010 Author: Josef Matheis Reviewed by: Michaela Kratzer Released by: Werner Gross
Training Kapsch CarrierCom AG Phone: +43 50 811 3525 | Fax: +43 50 811 3503 E-mail: [email protected] Kapsch CarrierCom AG | Am Europlatz 5 | A – 1120 Vienna | Austria www.kapschcarrier.com | www.kapsch.net
Copyright © Kapsch CarrierCom AG | All rights reserved. Kapsch CarrierCom AG retains all right, title and interest of the content and the information of this document. Kapsch Carrier Com AG in particular reserves all rights in respect of copying, duplication, distribution, modification or translation of the content, whether in whole or in part.
Kapsch CarrierCom
Page 38 Training Catalogue GSM and GSM-R Products
www.kapschcarrier.com www.kapsch.net
© K
apsc
h C
arrie
rCom
AG
. All
right
s re
serv
ed. S
ubje
ct to
cha
nge
with
out n
otic
e.