kaolin clay for paints and coatings - kaminllc.com · kamin llc kaolin clays are backed by superior...
TRANSCRIPT
Kaolin Clay for Paints and Coatings
VALUE FROM THE GROUND UP
KaMin LLC kaolin clays are backed by superior customer, sales and technical service.
Value from the ground up.
Kaolin extenders are designed to meet the requirements for each application.
KaMin LLC is a manufacturer of high quality
hydrous and calcined kaolin and its high
quality reserves and proprietary processing
technologies produce kaolins for a variety
of applications.
Coatings ExpertiseArchitectural
OEM/Industrial
Powder
Specialty
Water-WashedCoarse
Delaminated
Fine
Ultra-fine
Treated
CalcinedStandard
Fine
With a state-of-the-art paints and coatings
laboratory in Macon, GA, and supported by
customer care in the same location, KaMin LLC
backs up its technology commitment to
its customer.
To further support its drive for technological
excellence, direct sales personnel and a
dedicated network of global chemical
distributors work tirelessly to tackle tough
formulation challenges.
Your choice in kaolin is easy.
KaMin LLC mines kaolin clay deposits which have very low levels of crystalline silica. Levels are further reduced during processing.
For more information, please visit www.kaminllc.com and select the product finder to download MSDS and technical data sheets.
Product Physical Form
Average Stokes Equivalent Particle Size (µm) pH
Oil Adsorption g/100g Brightness*
extending gloss and semi-gloss coatings Maintain high gloss and lower formulation costs with these ultrafine, platy kaolin clays
Polygloss® 90 ultrafine powder 0.2 7 42 91 Ultrafine, highly pulverized, premium brightness kaolin clay for extending high gloss solvent and water-borne coatings
Lithosperse® 7005CS ultrafine powder 0.4 n/a 40 84 Treated kaolin developed for inks, disperses easily in solvent-based systems without grinding
KaMin™ HG90 spray dried bead 0.2 7 42 91 High brightness, ultrafine kaolin extender for water-borne glossy paints and coatings, bright whites to deeptone colors
KaMin™ TEK 2001 spray dried bead 0.25 7 34 92 High brightness, ultrafine kaolin extender for glossy water-borne coatings, bluer undertone vs. KaMin HG-90
extending flat and low-sheen coatingsCalcined clays are structured pigments imparting opacity and scrub resistance
KaMin™ 2000C powder 0.6 6 80 93 Highest brightness, smallest particle size, calcined kaolin clay, more cost-effective TiO2 extender than KaMin 70C
KaMin™ 70C powder 1.3 6 54 91 High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content
extension - water washed kaolinWater-washed kaolin clays offer good reinforcement, neutral pH, and extremely low crystalline silica and salt content.
KaMin™ 35 powder 4 7 27 83 Coarsest, lowest oil absorption kaolin for both water-borne and solvent-based frost-free exterior and interior/exterior primer/sealer applications.
KaMin™ 35B spray dried bead 4 7 27 83 Coarsest, lowest oil absorption kaolin for water-borne frost-free exterior and interior/exterior primer/sealer applications.
KaMin™ 80 powder 0.5 7 42 87 Cost effective, kaolin clay extender for both water-borne and solvent-based adhesives, inks and coatings
KaMin™ 80B spray dried bead 0.5 7 42 87 Cost effective, kaolin clay extender for water-borne adhesives, inks and coatings
KaMin™ 90 powder 0.4 7 43 88 Fine particle size kaolin clay for both water-borne and solvent-based EIFS, inks and coatings
KaMin™ 90B spray dried bead 0.4 7 43 88 Fine particle size kaolin clay for water-borne EIFS, inks and coatings
KaMin™ HG spray dried bead 0.2 7 33 88 Fine particle size kaolin clay for water-borne EIFS, inks and coatings
delaminated kaolin clays for primers and barrier coatings
Polyplate® P01 powder 0.75 7 42 88 Large, platy delaminated clay ideal for both water-borne and solvent-based primers to reduce vapor transmission rate
Polyplate® P spray dried bead 1 7 45 88 Large, platy delaminated clay ideal for water-borne primers to reduce vapor transmission rate
Polyplate® HMT spray dried bead 1.2 7 42 88 Largest, platy delaminated clay, with a higher aspect ratio than Polyplate P, for water-borne paints and coatings
KaMin™ 611 spray dried bead 0.4 7 40 91 Naturally delaminated clay for use in water-borne paints and coatings
* These are typical properties - not specifications
What can KaMin LLC do for you?
Kaolin clays by KaMin LLC enhance the performance, cost and appeal of paints and coatings. Whether it’s an architectural, industrial, powder, or specialty coating, KaMin LLC products are formulated to provide the desired benefit for each type of coating. These benefits include:
Cost Effective Resin and TiO – 2 Extension
Gloss and Sheen Control –
Rheology Control and Suspension –
Environmentally Friendly –
Durability, Weathering and Barrier –Enhancement
Washability and Scrub Resistance –
Opacity and Tinting Strength – KaMin LLC(478) [email protected] www.kaminllc.com
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Refer to KaMin LLC’s Standard Conditions of Sale for the only express warranties applicable to the KaMin LLC products. Products incorporating KaMin products are not warranted by KaMin LLC. In no event is KaMin LLC liable for consequential damages. © 2008 KaMin LLC
KaMin™ is a registered trademark of KaMin LLC for kaolin clay.Lithosperse® is a registered trademark of KaMin LLC for kaolin clay.Polygloss® is a registered trademark of KaMin LLC for kaolin clay.
IND / NA / P & C / Rev II / Oct 08