justification for hydrant valve
TRANSCRIPT
-
8/20/2019 Justification for Hydrant Valve
1/3
As Per Powergrid specification Clause no. 7.03.16 Body of Hydrant Valve shall be Stainless Steel
and Internal part(i.e. Trim, Spring,Quick coupling…etc.) shall be Gun metal (Leaded tin bronze‐
LTB‐‐2).
PGCIL approved manufacturer is not manufacturing hydrant valve as per above MOC.
Hence we have discussed this issue with Engineer of Powergrid and as per their
Instruction we have supplied Hydrant valve with Gun metal body and internals as per Powergrid
Specification Rev.5.
Project :Fire Fighting System for 400/220kV Kishanganj GIS substation (New)
Ultimate Client: M/s. PGCILClient: M/s. KEC International limited.
Subject : Regarding Problem in issuing MICC for Hydrant Valve due to change in MOC SS to GM.
As Per Powergrid specification Clause no.
-
8/20/2019 Justification for Hydrant Valve
2/3
Also we are attaching Powergrid approved technical datasheet and Bill of Quantity for your
reference. wherein MOC of Hydrant Valve is mentioned as Gunmetal.
-
8/20/2019 Justification for Hydrant Valve
3/3