Just KissesDesigned by Robert Kaufman Fabricswww.robertkaufman.com

Featuring

STAR PARTY

For questions about this pattern, please email Patterns@RobertKaufman.com.

Finished quilt measures: 56-1/4” x 56-1/4”

page 2

Fabric and Supplies Needed

Color Fabric Name/SKU Yardage

K001-45 POOL

K001-487 CORSAGE

AUI-17164-4 BLUE

K001-32 SURF

AUI-17164-10 PINK

K001-419 AZALEA

K001-1387 WHITE

AUI-17163-10 PINK

FQ-1278-12, *containing each of the following fabrics

AUI-17163-4 BLUE

AUI-17165-10 PINK

AUI-17165-4 BLUE

K001-27 CORNFLOWER

K001-489 GUMDROP

Color Fabric Name/SKU Yardage

Fabric amounts based on yardage that is 42” wide.

A

B

C

D

E

F

G

H

I

J

K

L

M

2-1/4 yards

*one fat quarter

one fat quarter bundle

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

*one fat quarter

1/2 yard

Copyright 2017, Robert KaufmanFor individual use only - Not for resale

You will also need:3-5/8 yards for backing

K001-32 SURF

*Also used for Fabric K

Binding*

page 3

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

From Fabric A, cut:six 8-1/4” x WOF strips. Subcut: thirty-six 6” x 8-1/4” rectanglesfour 3-3/4” x WOF strips. Subcut: thirty-six 3-3/4” squares for the HSTsthree 3-1/4” x WOF strips. Subcut: thirty-six 3-1/4” squares

From Fabric B, fussy cut: four 5-3/4” squares

From Fabric C, fussy cut: fi ve 5-3/4” squares

From each of Fabrics D and E, cut:four 3-1/4” x 21” strips. Subcut: eighteen 3-1/4” squares From Fabric F, cut:two 3-3/4” x 21” strips. Subcut: ten 3-3/4” squares for the HSTsfour 1-3/4” x 21” strips. Subcut: eight 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

From Fabric G, cut:two 3-3/4” x 21” strips. Subcut: eight 3-3/4” squares for the HSTstwo 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

Notes Before You Begin

Cutting Instructions

page 4

From Fabric H, cut:one 3-3/4” x 21” strip. Subcut: four 3-3/4” squares for the HSTstwo 3-1/4” x 21” strip. Subcut: eight 3-1/4” squares for the stitch-and-fl ip cornerstwo 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

From Fabric I, cut:four 3-1/4” x 21” strips. Subcut: twenty-four 3-1/4” squares for the stitch-and-fl ip cornerstwo 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

From Fabric J, cut:one 3-3/4” x 21” strip. Subcut: one 3-3/4” square for the HSTs Trim the remainder of the strip to 3-1/4” wide, then subcut: four 3-1/4” squares for the stitch-and-fl ip cornerstwo 3-1/4” x 21” strips. Subcut: twelve 3-1/4” squares for the stitch-and-fl ip corners, for a total of sixteentwo 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles eight 1-3/4” squares

From Fabric K, cut:one 3-3/4” x 21” strip. Subcut: one 3-3/4” square for the HSTs Trim the remainder of the strip to 3-1/4” wide, then subcut: four 3-1/4” squares for the stitch-and-fl ip cornerstwo 3-1/4” x 21” strips. Subcut: twelve 3-1/4” squares for the stitch-and-fl ip corners, for a total of sixteen two 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

From Fabric L, cut:one 3-3/4” x 21” strip. Subcut: four 3-3/4” squares for the HSTstwo 3-1/2” x 21” strip. Subcut: eight 3-1/4” squares for the stitch-and-fl ip cornerstwo 1-3/4” x 21” strips. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

page 5

From Fabric M, cut:two 3-3/4” x WOF strips. Subcut: eight 3-3/4” squares for the HSTsone 1-3/4” x WOF strip. Subcut: four 1-3/4” x 5-3/4” rectangles four 1-3/4” squares

From the Binding Fabric, cut:six 2-1/2” x WOF strips

On the wrong side of all 3-1/4” square stitch-and-fl ip units and all 3-3/4” Fabric A squares, mark a diagonal from corner to corner, in pencil. Set aside for Steps 1 and 4.

Note: Block 1 is shown in the steps here. Construction for the remainder of the blocks uses the same process. Refer to the Quilt Assembly Diagram for the fabric placements and parings for the remaining blocks.

Step 1: Pair a 3-3/4” Fabric A square with a 3-3/4” print or solid color square, RST. Sew 1/4” away from both sides of the marked line. Cut on the marked line, creating two half-square triangles (HSTs). Press toward the darker fabric. Trim to 3-1/4” square. Repeat with all 3-3/4” Fabric A squares to make a total of seventy-two HSTs.

Prepare for HSTs and Stitch-and-Flip units

Assemble the Blocks

Assemble the Half-Square Triangles (HSTs)

Step 2: Gather four 1-3/4” x 5-3/4” Fabric F rectangles. Sew two to opposite edges of a Fabric C square. Press away from the center square.

Step 3: Sew a 1-3/4” Fabric H square to opposite edges of the remaining two 1-3/4” x 5-3/4” Fabric F rectangles. Press toward the rectangles. Sew these units to the top and bottom edges of the center square. Press away from the center square.

page 6

Step 4: Place one 3-1/4” Fabric I square in the top left corner of a 6” x 8-1/4” Fabric A rectangle, with the marked diagonal as shown. Sew on the marked line. Trim to leave a 1/4” seam allowance, then press the triangle toward the corner. Repeat with the top right corner of the Fabric A rectangle. Repeat to make four units like this.

Step 5: Gather:• completed Step 3 center

unit• four completed Step 4

units• four 3-1/4” Fabric A

squares• four F/A HSTs• two G/A HSTs• two M/A HSTs• two Fabric D squares• two Fabric E squares

Arrange to form Block 1, noting the orientation of the Fabric D and E squares and the placement of the HST colors.

page 7

Step 6: Beginning in the top left corner, sew a four-patch unit, pressing the row seams away from the HSTs. Press the fi nal seam open. Repeat to create a total of four four-patch units.

Step 7: Sew the block together in three rows of three, pressing the seams toward the 6” x 8-1/4” units. Sew the rows together, pressing the seams open or to one side. The resulting block will measure 19-1/4” square.

Repeat Steps 2-7 to create Blocks 2-9. Note the fabric placement in each block, using the Quilt Assembly Diagram.

page 8

Step 8: Arrange the blocks into three rows of three blocks. Note the fabric placement and block orientation in the Quilt Assembly Diagram.

Step 9: Sew the blocks together to form rows. Press the rows to the left in the odd numbered rows and to the right in the even numbered row.

Step 10: Sew the rows together to form the quilt center. Press the row seams open.

Your quilt top is complete! Baste, quilt, bind and enjoy!

Assemble the Quilt