just kisses - robert kaufman fabricspage 4 from fabric f, cut: five 4” x wof strips. sew together,...
TRANSCRIPT
Difficulty Rating: Beginner
Just KissesDesigned by Ariga Mahmoudlou for RKwww.robertkaufman.com
Featuring
NEIGHBORHOOD
For questions about this pattern, please email [email protected].
Finished quilt measures: 47-1/2” x 57-1/2”
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage Color Fabric Name/SKU Yardage
K001-1387 WHITE
AQCD-19905-56 POND
AQCD-19907-71 LAGOON
AQCD-19907-73 LAKE
AQCD-19903-50 LIME
AQCD-19906-64 AZURE
AQCD-19904-2 BLACK
AQCD-19907-246 WATER
AQCD-19904-60 PACIFIC
AQCD-19910-285 EMBER
AQCD-19911-311 TURKISH SEA
AQCD-19908-248 MARINE
AQCD-19912-333 SEA GLASS
AQCD-19909-257 CARIBBEAN
Fabric amounts based on yardage that is 42” wide.
A
G
D
I
L
B
H
E
J
M
K
N
C
F
5/8 yard
1/4 yard
1/4 yard
1/4 yard
1/2 yard
1/4 yard
1/4 yard
1/4 yard
1/4 yard
1/4 yard
1/8 yard
1/4 yard
7/8 yard
1/4 yard
1/4 yard
Copyright 2020, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/4 yards for backing
AQCD-19907-71 LAGOON
*Also used for Fabric D
Binding*
page 3
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
From Fabric A, cut:eighteen 1” x WOF strips. Subcut: four 1” x 40” row sashing strips two 1” x 41” top/bottom inner borders thirty-five1”x10”rectangles twenty 1” x 6-1/2” rectangles twenty 1” x 3-1/2” rectangles sew the remaining three strips together, end-to-end, then trim: two 1” x 50” side inner borders From each of Fabrics B, H, J, L and N, cut:one 6-1/2” x WOF strips. Subcut: four 6-1/2” squares
From Fabric C, cut:one 6-1/2” x WOF strip. Subcut: two 3-1/2” x 6-1/2” rectangles Trim the remainder of the strip to 3-1/2” wide, then subcut: three 6-1/2” x 3-1/2” rectangles
From Fabric D, cut:one 6-1/2” x WOF strip. Subcut: four 3-1/2” x 6-1/2” rectangles Trim the remainder of the strip to 3-1/2” wide, then subcut: one 6-1/2” x 3-1/2” rectangle
From Fabric E, cut:one 6-1/2” x WOF strip. Subcut:one 3-1/2” x 6-1/2” rectangle Trim the remainder of the strip to 3-1/2” wide, then subcut: four 6-1/2” x 3-1/2” rectangles
From Fabric F, cut:five4”xWOFstrips.Sewtogether,end-to-end,thentrim: two 4” x 51” side outer borders two 4” x 48” top/bottom outer borders
Notes Before You Begin
Cutting Instructions
page 4
two 3-1/2” x WOF strips. Subcut: five3-1/2”x6-1/2”rectangles four 3-1/2” squares
From Fabric G, cut:one 6-1/2” x WOF strip. Subcut: three 6-1/2” x 3-1/2” rectangles Trim the remainder of the strip to 3-1/2” wide, then subcut: two 3-1/2” x 6-1/2” rectangles four 3-1/2” squares
From Fabric I, cut:one 6-1/2” x WOF strip. Subcut: four 6-1/2” x 3-1/2” rectangles Trim the remainder of the strip to 3-1/2” wide, then subcut: one 3-1/2” x 6-1/2” rectangle three 3-1/2” squares
From Fabric K, cut:one 6-1/2” x WOF strip. Subcut: two 6-1/2” x 3-1/2” rectangles Trim the remainder of the strip to 3-1/2” wide, then subcut: three 3-1/2” x 6-1/2” rectangles four 3-1/2” squares
From Fabric M, cut:one 3-1/2” x WOF strip. Subcut: five3-1/2”x6-1/2”rectangles
From the Binding Fabric, cut:six 2-1/2” x WOF strips
Step 1: Gather:one 6-1/2” Fabric B squareone Fabric C rectangleone Fabric D rectangleone 3-1/2” Fabric E squareone 3-1/2” Fabric A stripone 6-1/2” Fabric A stripone 10” Fabric A strip
Assemble the Blocks
Arrange the units as shown, forming the Block. Note the fabric placement and block orientation in the Block Assembly Diagram.
Step 2: Sew the 6-1/2” A strip between the B and C units. Press. Sew the 3-1/2” A strip between the D and E units. Press. Sew the B/C unit to the D/E unit, sewing the 10” A strip between. Press. The resulting Block should measure 10” square.
page 5
This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2020. All rights reserved.
Step 4: Arrange the Blocks together as indicated in the Quilt Assembly Diagram. Sew each row together, using 10” Fabric A sashing strips between each block. Press seams toward the sashing. Repeat to makefiveblockrows.
Step 5: Sew the sashing and block rows together. Press seams open or to the sashing.
Step 6: Sew the side inner borders to the sides of the quilt center. Press toward the borders. Sew the top and bottom inner borders to the quilt center. Press toward the borders.
Step 7: Sew the side outer borders to the sides of the quilt center. Press toward the borders. Sew the top and bottom outer borders to the quilt center. Press toward the borders.
Assemble the Quilt
Step 3: Repeat the process in Step 1 to make the remaining Blocks. Note the orientation and placement of the fabrics in each block, using the Quilt Assembly Diagram for reference. Each time you will sew the 3-1/2” square, 3-1/2” A strip and one of the 3-1/2” x 6-1/2” rectangles together, then sew the 6-1/2” square, 6-1/2” A strip and remaining 3-1/2” x 6-1/2” rectangletogether,beforefinallysewingtheunitstogetherwiththe10”Astrip.
Your quilt top is complete! Baste, quilt, bind and enjoy!