just kissespage 5 step 2: sew the three 5-1/2” long units together, adding a 5-1/2” fabric a...
TRANSCRIPT
-
Difficulty Rating: Beginner
Just KissesDesigned by Ariga Mahmoudlou for RKwww.robertkaufman.com
Featuring
ELEMENTS
For questions about this pattern, please email [email protected].
Finished quilt measures: 56” x 69”
-
page 2
Fabric and Supplies Needed
K001-1387 WHITE
K001-850 DOESKIN
K001-1019 BLACK
K001-1855 SUEDE
K001-1323 SAND
K001-843 LINGERIE
K001-1271 SHELL
K001-1176 ICE PEACH
Fabric amounts based on yardage that is 42” wide.
A F
B G
HC
D
E
1-1/2 yard 1/2 yard
1 yard 3/8 yard
1/3 yard
1/2 yard
5/8 yard
1/3 yard
1/2 yard
Copyright 2020, Robert KaufmanFor individual use only - Not for resale
You will also need:3-5/8 yards for backing
K001-1019 BLACK
*Also used for Fabric B
Binding*
Color ColorFabric FabricName/SKU Name/SKUYardage Yardage
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
Notes Before You Begin
-
page 3
From Fabric A, cut:six 5-1/2” x WOF strips. Sew together, end to end, then trim: one 5-1/2” x 35-1/2” strip for the top outer border one 5-1/2” x 14-1/2” strip for the top outer border one 5-1/2” x 59-1/2” strip for the right outer border one 5-1/2” x 28-1/2” strip for the left outer border one 5-1/2” x 24-1/2” strip for the left outer border one 5-1/2” x 56-1/2” strip for the bottom outer borderone 6-1/2” x WOF strip. Subcut: one 6-1/2” x 7-1/2” rectangleeight 1-1/2” x WOF strips. Subcut: one 1-1/2” x 12-1/2” strip for Section C. one 1-1/2” x 9-1/2” strip for Section A. one 1-1/2” x 5-1/2” strip for the left outer border. one 1-1/2” x 5-1/2” strip for the TOP outer border.Set aside the seven remaining full WOF pieces for strip piecing the striped sections.
From Fabric B, cut:fifteen 1-1/2” x WOF strips. Subcut: one 1-1/2” x 12-1/2” strip for Section A. one 1-1/2” x 15-1/2” strip for Section B. one 1-1/2” x 6-1/2” strip for Section E.Set aside the fourteen remaining full WOF pieces for strip piecing the striped sections.three 2-1/2” x WOF strips. Subcut: one 2-1/2” x 9-1/2” strip for Section E.Set aside the two remaining full WOF pieces for strip piecing the striped sections.
From Fabric C, cut:two 1-1/2” x WOF strips. Set aside for strip piecing the striped sections.one 6-1/2” x 13-1/2” rectangle
From Fabric D, cut:one 14-1/2” x WOF strip. Subcut: one 14-1/2” x 10-1/2” rectangle Trim the remainder of the strip to 12-1/2” wide, then subcut: one 12-1/2” x 8-1/2” rectangle Trim the remainder of the strip to 6-1/2” wide, then subcut: one 6-1/2” x 15-1/2” rectangle
Cutting Instructions
-
page 4
From Fabric E, cut: Following the cutting diagram, subcut: one 18-1/2” x 10-1/2” rectangle one 18-1/2” x 4-1/2” rectangle one 12-1/2” x 7-1/2” rectangle one 11-1/2” x 3-1/2” rectangle
From Fabric F, cut: Following the cutting diagram, subcut: one 12-1/2” x 8-1/2” rectangle one 9-1/2” square one 6-1/2” x 13-1/2” rectangle one 6-1/2” x 18-1/2” rectangletwo 1-1/2” x WOF strips. Set aside for strip piecing the striped sections.
From Fabric G, cut:two 1-1/2” x WOF strips. Set aside for strip piecing the striped sections.three 2-1/2” x WOF strips. Subcut: one 2-1/2” x 12-1/2” strip for Section E.Set aside the two remaining full WOF pieces for strip piecing the striped sections.
From Fabric H, cut:one 2-1/2” x WOF strips. Set aside for strip piecing the striped sections.five 1-1/2” x WOF strips. Set aside for strip piecing the striped sections.
From the Binding Fabric, cut:seven 2-1/2” x WOF strips
Step 1: Sew a 1-1/2” Fabric B strip to a 1-1/2” Fabric A strip. Press the seams open. The strip should be 2-1/2” wide. Repeat to make five strip sets like this. Subcut to make:
Assemble the Strip Pieced Sections
three 5-1/2” x 2-1/2” units
six 15-1/2” x 2-1/2” units
three 12-1/2” x 2-1/2” units
eight 7-1/2” x 2-1/2” units
-
page 5
Step 2: Sew the three 5-1/2” long units together, adding a 5-1/2” Fabric A strip to the Fabric B end. Press the seams open. Set aside for the outer left border.
Step 3: Sew the three 12-1/2” long units together, adding a 12-1/2” Fabric A strip to the Fabric B end. Press the seams open. Set aside for Section C.
Step 4: Sew the eight 7-1/2” long units together. Press the seams open. Set aside for Section C.
Step 6: Sew a 1-1/2” Fabric B strip to a 1-1/2” Fabric C strip. Press the seams open. The strip should be 2-1/2” wide. Repeat to make two strip sets like this. Subcut to make:
six 5-1/2” x 2-1/2” units
seven 6-1/2” x 2-1/2” units
Step 5: Sew the six 15-1/2” long units together. Press the seams open. Set aside for Section E.
-
page 6
Step 7: Sew the six 5-1/2” long units together. Press the seams open. Set aside for Section B.
Step 8: Sew the seven 6-1/2” long units together, adding a 6-1/2” Fabric B strip to the Fabric C end. Press the seams open. Set aside for Section E.
Step 9: Sew a 1-1/2” Fabric A strip to a 1-1/2” Fabric F strip. Press the seams open. The strip should be 2-1/2” wide. Repeat to make two strip sets like this. Subcut to make:
three 9-1/2” x 2-1/2” units
three 5-1/2” x 2-1/2” units
Step 11: Sew the three 5-1/2” long units together, adding a 5-1/2” Fabric A strip to the Fabric F end. Press the seams open. Set aside for the top outer border.
Step 10: Sew the three 9-1/2” long units together, adding a 9-1/2” Fabric A strip to the Fabric F end. Press the seams open. Set aside for Section A.
-
page 7
Step 12: Sew a 1-1/2” Fabric B strip to a 1-1/2” Fabric H strip. Press the seams open. The strip should be 2-1/2” wide. Repeat to make five strip sets like this. Subcut to make:
five 15-1/2” x 2-1/2” units
six 11-1/2” x 2-1/2” units
Step 13: Sew the five 15-1/2” long units together, adding a 15-1/2” Fabric B strip to the Fabric H end. Press the seams open. Set aside for Section B.
Step 14: Sew the six 11-1/2” long units together. Press the seams open. Set aside for Section D.
Step 15: Sew a 1-1/2” Fabric B strip to a 1-1/2” Fabric G strip. Press the seams open. The strip should be 2-1/2” wide. Repeat to make two strip sets like this. Subcut to make:
two 12-1/2” x 2-1/2” units
seven 6-1/2” x 2-1/2” units
two 5-1/2” x 2-1/2” units
Step 16: Sew the two 12-1/2” long units together, adding a 12-1/2” Fabric B strip to the Fabric G end. Press the seams open. Set aside for Section A.
Step 17: Sew the two 5-1/2” long units together. Press the seams open. Set aside for Section A.
-
page 8
Step 18: Sew the seven 6-1/2” long units together. Press the seams open. Set aside for Section A.
Step 19: Sew a 2-1/2” Fabric B strip to a 2-1/2” Fabric H strip. Press the seams open. The strip should be 4-1/2” wide. Subcut to make:
four 9-1/2” x 4-1/2” units
Step 20: Sew the four 9-1/2” long units together, adding a 9-1/2” Fabric B strip to the Fabric H end. Press the seams open. Set aside for Section E.
Step 21: Sew a 2-1/2” Fabric B strip to a 2-1/2” Fabric G strip. Press the seams open. Make two strip sets like this. The strip sets should be 4-1/2” wide. Subcut to make:
three 9-1/2” x 4-1/2” units
four 12-1/2” x 4-1/2” units
Step 22: Sew the three 9-1/2” long units together. Press the seams open. Set aside for Section D.
-
page 9
Step 23: Sew the four 12-1/2” long units together, adding a 12-1/2” Fabric G strip to the Fabric B end. Press the seams open. Set aside for Section E.
Step 24: Gather the units shown. Sew together in three rows, pressing the seams to one side. Sew the three rows together to complete Section A.
Assemble Section A
Step 25: Gather the units shown. Sew together in two sections, as shown, pressing the seams to one side. Sew the two sections together to complete Section B.
Assemble Section B
-
page 10
Step 26: Gather the units shown. Sew together in one row, pressing the seams to one side, to form Section C.
Step 27: Gather the units shown. Sew together in one column, pressing the seams to one side, to form Section D.
Assemble Section C
Assemble Section D
Step 28: Gather the units shown. Sew together as one top row and four columns, as shown, before sewing the two units together, pressing the seams to one side to form Section E.
Assemble Section E
-
page 11
Step 29: Sew Section A to the left of Section B. Press.
Sew Section C to the bottom of Section AB. Press.
Sew Section D to the right edge of Section ABC. Press.
Sew Section E to the bottom edge of Section ABCD. Press.
Sew the left and right outer borders to the quilt center. Press.
Sew the top and bottom outer borders to the quilt center. Press.
Your quilt top is complete! Baste, quilt, bind and enjoy!
Assemble the Quilt
This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2020. All rights reserved.