jsrlflp series - induchem group · sparging, blanketing, motive force, or sud bag inflation, ......

Steriflow by Jordan Valve 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f)[email protected] • www.steriflowvalve.com

JSRLFLP SeriesPressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas

JSRLFLP is a high purity low flow, regulator designed and built specifically for very low pressure hygienic, ASME BPE gas applications.

The JSRLFLP has been designed specifically for very low pressure clean gas regulation in Stainless and Single Use Disposable applications. Whether it's precise regulation for sparging, blanketing, motive force, or SUD bag inflation, the JSRLFLP was built for the job!

The durable valve body and metal trim components are machined from ASTMA479 316L SST barstock and fin-ished to ASME BPE SF5, 20Ra micro-inch, (0.5 Ra microm-eter) electropolished as standard.

The valve is outfitted with a sensitive PTFE Jorlon dia-phragm and Teflon or PEEK, seats and seals that are all FDA approved, USP Class VI compliant materials. These materials of construction enable JSRLFLP to withstand the rigors of an autoclave if required.

Features

• Stable outlet pressure setpoints at very low pressure• Very low set point offset (droop) especially at higher

inlet pressures• Top entry design facilitates in-line cleaning and

maintenance• Barstock construction guarantees material integrity

and quality surface finish• Four Cv's from 0.01 to 0.2 guarantee a valve that will

fit your specific application• Optimized internal volume• Proprietary Jorlon diaphragm material provides ex-

ceptionally long life• Soft seat material for ANSI Class VI shutoff

Documentation

The following documentation is shipped at no charge:• Steriflow Unicert: Certificate of Compliance for: - Material, including MTR’s - Surface Finish - FDA/USP Class VI• Traceability: Each Unicert includes individual valve serial numbers, heat numbers and attached MTR’s directly traceable to the valve serial number and heat numbers imprinted on all wetted metallic components.

surFace Finish

• ASME BPE SF5 (20 Ra µin (0.5 Ra μm), elec-tropolished) — standard for all external and wetted metal parts

• ASME BPE SF1 (20 Ra µin) mechanical finish, non-electropolished and other finishes available

• O2 cleaning — optional

applications

Ideal for low pressure regulation of gases used in bio-pharmaceutical R&D and production facilities. Designed specifically for very low pressure control in traditional Stainless Steel and Single Use Dispos-able installations such as: Gas overlay or motive force movement, pressure filling, Lyophilization, sparging, or SUD bag inflation.• Clean Filter Air• Nitrogen• Carbon Dioxide• Argon• Oxygen• Custom purge or blanket gas

Sanitary V

alves

JS

RLFLP S

erie

s Low

Flow

Low

Pressure

Gas R

ed

ucing V

alves

-2-

JSRLFLP SeRieS Low FLow Low PReSSuRe Reducing VaLVe

speciFications

Sizes: 1/4" (DN8), 3/8" (DN10), 1/2" (DN15)

End Connections: NPT all sizes, Tri-Clamp and Tube Weld End 1/2"(DN15) only

Soft Seat Materials for ANSI Class VI Shut-off• PTFE to +252°F (122°C) continuous or 275°F (135°C)

intermittent [not to exceed 15 min. in a one hour pe-riod] FDA, USP Class VI

• PEEK to +350°F (177°C), FDA & USP Class VI

Body and Trim Material• ASTM A479 316L SST• Contact factory for other body/trim/seat materials

Diaphragm Material: Jorlon - PTFETM, FDA & USP Class VI

Maximum Inlet Pressure: • Tube End & Tri-Clamp: 150 psig (10,3 bar)• NPT: 150 psig (10,3 bar)

Pressure at Maximum Temperature:• Tube End and Tri-Clamp: 150 psi @ 350°F (10,3 bar @

177°C) with PEEK seats; 150 psi @ 150°F (10,3 bar @ 66°C) with PTFE seats

• NPT: 150 psi @ 350°F (10,3 bar @ 177°C) with PEEK seats; 150 psi @ 150°F (10,3 bar @ 66°C) with PTFE seats

Surface Finish:• ASME BPE SF5, 20 Ra, µin (0,5 Ra, µm) electropolish

standard• ASME BPE SF1, 20 Ra, µin, (0,5 Ra µm), non-EP is

optional, as are other finishes

Maximum Pressure Drop: • Tube End and Tri-Clamp: 150 psi (10,3 bar)• NPT: 150 psi (10,3 bar)

Spring Ranges: 1 – 75 psi (0,07 – 5,2 bar)

Flow Capacities: Cv 0.012, Cv 0.03, Cv 0.08, Cv 0.20 (Kv 0,010, Kv 0,026, Kv 0,069, Kv 0,173)

Options• Oxygen cleaning and certification• Panel Mounting• Captured Vent• Self Relieving• Gauge Ports, Pressure Gauger

options

Panel Mount Option Captured Vent Option (1/8" NPT)

option DeFinition

Captured Vent The captured vent design is for maximum safety for the user when handling toxic or hazardous media. It features a 1/8" FNPT port located on the spring housing. The user can easily tube this vent to a safe location. This option can be incorporated into a self-relieving regulator that provides an additional port to permit the safe expulsion of hazardous media.Panel Mount The panel mount feature requires a panel cut out of 1-1/2", complete with a threaded spring housing, and a panel mount ring to secure the regulator.*Self RelievingThe self relieving option is used for internal venting of downstream pressure. From a practical stand-point, it allows for immediate reduction in pressure setpoints and automatically alleviates regulator lock up. Gauge Ports - Pressure GaugeFor inlet and outlet pressure gauges (and the gauges) are available as standard options


-3-

anti-tamper optionA

DID A

AD ID A

DIN 32676 Row B (ISO 1127)VALVE SIZE A AD ID

DN15 50.5 21.3 18.1DN15* 34.0 21.3 18.1DN20 50.5 26.9 22.9

DIN 32676 Row A (ISO 11850)VALVE SIZE A AD ID

DN15 34.0 19.0 16.0DN15* 50.5 19.0 16.0DN20 34.0 23.0 20.0DN20* 50.5 23.0 20.0

Din & iso tri-clamp Dimensions

Acorn nut cover

Lock nut

Allen/socket head stem adjustment

Internal View1. Adjust stem position with Allen

wrench2. Tighten lock nut against bonnet

while holding stem position3. Replace and tighten acorn nut

* with non-standard Tri-clamp face

* with non-standard Tri-clamp face


Features & BeneFits

-4-

Fine thread pitch for precision setpoint adjustments.

ASTM A479 316L body, diaphragm casing, bonnet, and trim

ASME BPE SF5, 20 Ra µin (0,5 Ra µm) electropolish finish is standard

FDA / USP Class VI seat material for ANSI Class VI shutoff

1/2" Tri-Clamp and Tube Weld Connections; 1/4", 3/8" and 1/2" NPT

PTFE-JorlonTM FDA / USP Class VI approvedUnsurpassed life

Flow conFigurations

outlet inlet

outlet gage

inlet gage

* Gage ports are 1/4" FNPT (consult factory for required alternative)Consult factory for other porting options

A B

D E

outlet inlet

outlet inlet outlet inlet

inlet gage outlet gage

outlet gage

outlet inlet

SAMPLE

C

outlet inlet

270°

90°

Autoclavable Anodized Aluminum Knob available as cataloged option

Reliable, gas pressureregulation at flows less than 1 LPM and set points to 1 psig (69 millibar)

Large diaphragm area for increased stability, and less offset at very low setpoints


-5-

• JSRLFLP Series with Tri-Clamp Ends, InchesVALVE SIZE A

1/2" 4.073/4" 4.07

• JSRLFLP Series with Tri-Clamp Ends, MetricVALVE SIZE A

DN15 103,4DN20 103,4

Dimensions

5.10 (129,5)5.93

(150,6)

A

• JSRLFLP Series with FNPT/SW Ends, InchesVALVE SIZE A

1/4" 2.003/8" 2.001/2" 2.75

• JSRLFLP Series with FNPT/SW Ends, MetricVALVE SIZE A

DN8 50,8DN10 50,8DN15 69,9

• JSRLFLP Series with Tube Ends, InchesVALVE SIZE A

1/2" 8.853/4" 8.85

• JSRLFLP Series with Tube Ends, MetricVALVE SIZE A

DN15 224,8DN20 224,8

Ø5.7 (144,8)

cv trim selection instructions

1. Select a graph on the following twelve pages that best represents your outlet pressure set point and flow range.2. Select the inlet pressure line on the graph (horizontal sloped line, P1) that reflects your application's actual inlet

pressure.3. That line indicates the Pressure/Flow capabilities of the Cv trim under flowing conditions

Flow Data For cv trim selection

The graphs illustrate the change or "droop" in outlet pressures as the flow rate increases, and the lockup (setpoint rise) as flow decreases and approaches zero.

Flow Coefficient: 0.012Maximum inlet pressure: 150 psig (10,3 bar)

-6-

Pressure Control RangeRange Spring: 0-75 psig (0-5,2 bar)Set Point: 15 psig





0.2

0

0.40.60.8

11.2

0

0 0.40

0.09

0.121.81.61.41.2

1

0

0 1.5

0.3

0.70.8

8

6

4

0

0.5

10

12

0

0.05

0.1

1

0.5

0

0.152

2.50.2

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)

Air Flow (L/min)Air Flow (L/min)

Air Flow (SCFM)

Air Flow (SCFM) Air Flow (SCFM)

Air Flow (SCFM)Air Flow (SCFM)0.1


00.2

11.2

5

0

0.8

1.4

10

15

1.6

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)

0.6

8642 10 12 14

5 15 20 35 40302510

4

3

2

1

5

6

0

0.2

0.1

0.25

0 0.50

8642

10121416

P1=50 psiP1=75 psiP1=100 psi

P1=50 psiP1=75 psi P1=100 psi

P1=75 psiP1=100 psi

1.5

0.5

5 10 15 20 25 30 35 40

0.4

P1=75 psi P1=100 psi


P1=35 psiP1=50 psi

P1=75 psiP1=100 psi0.03

P1=10 psi

1

0.15

0.05

5 15 30 35 40252010

5 45 15 35 40302010Air Flow (L/min)

1

0.4

0.6

0 0.5 1 1.5

0.8

0.2 0.3 0.5

1.5

1820

0 10.5 1.5

2015105 25 30 35 403

2

0.60.40.2


0.07

0.05

0.01P1=25 psi

P1=35 psi

0 1.50.5 1

0.30.350.4

P1=35 psi

P1=10 psi

P1=25 psi

P1=50 psiP1=35 psi

P1=25 psi

0.20.10

P1=35 psiP1=25 psi

P1=25 psiP1=10 psi

P1=50 psi

P1=35 psi

P1=25 psi


-7-








0.50

11.522.53

0 10

1

23025

20

1510

5

0

1.5

0

0

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)


Air Flow (SCFM)


Air Flow (SCFM)Air Flow (SCFM)

1.5

15105 20 30 35 40

0 0.50

2

1

2.5

00

3025201510

35404550

P1=75 psiP1=100 psi

P1=75 psi

P1=100 psi

P1=100 psi


P1=35 psi P1=50 psi P1=75 psiP1=100 psi

0.5

1

1

1.5

0.5

Air Flow (L/min)

0.5

353025201510

05

40

1.5

1.5

00


25

P1=50 psiP1=35 psi

P1=50 psi

15105 20 30 35 4025

15105 20 30 35 4025

P1=75 psi

0.5

15105 20 30 35 4025

15105 20 30 35 4025

15105 20 30 35 4025

0.50

11.522.53

0.50

11.5

2

2.53

0.5 1 1.5

0 0.5 1 1.5

353025201510

05

4045

P1=50 psi

Outle

t Pre

ssur

e (ba

r)

1

2

1.5

0.5

3.54

Outle

t Pre

ssur

e (ba

r)

Air Flow (SCFM)

Air Flow (L/min)


P1=100 psiP1=75 psi

0

20

10

30

4050

60

Outle

t Pre

ssur

e (ps

i)1 1.50.5

3530252015105




-8-






0 1.5

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)


Air Flow (SCFM)



0

0 0.5

P1=75 psi

P1=100 psi

P1=75 psi

P1=100 psi

P1=100 psi

0.5


P1=75 psiP1=100 psi

1

Air Flow (L/min)

1

1.5

0 10.5 1.5


0 1.50.5 1

15105 20 30 35 4025

15105 20 30 35 4025

15105 20 30 35 4025

15105 20 30 35 4025

15105 20 30 35 4025

0 1.50.5 1

0.511.522.533.54

0.50

11.522.533.54

0

1

2

3

4

5

0

1

2

3

4

5

0.50

11.522.533.545

4.5

0

20

10

30

40

5060

0

2010

3040506070

0

2010

3040506070

0

2010

304050607080

80

0

2010

3040506070


-9-

The graphs illustrate the change or "droop" in outlet pressures as the flow rate increases, and the lockup (setpoint rise) as flow decreases and approaches zero.Flow Coefficient: 0.03Maximum inlet pressure: 150 psig (10,3 bar)






0 20

0.4

0.6

1

0.8

1.21618

141210

86420

0

0.050

0.10.15

0.350.46

5

3

2

0

00

0.04

0.06

2015105

1.61.4

0.8

0.60.4

01.5

1.8

0.02

00.1

0.30.4

0.812

0

0.2

8

2

0

0.05

2

1.5

1

0.5

2.5

3 0.2

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min) Air Flow (L/min)


Air Flow (SCFM)



P1=10 psiP1=25 psi P1=75 psi P1=100 psi

25

1

4

0

10

4

6

30 35

10.5

0.5 1 1.5

P1=75 psiP1=100 psi

0.5

P1=100 psi

P1=75 psiP1=100 psi

P1=75 psi

P1=100 psi

0.08

0.12

0.10.15

0.1


40

1.21

0.2

2015105 25 30 35 40 45

0.30.250.2

P1=35 psi P1=50 psi

P1=35 psi

P1=25 psiP1=10 psi

P1=50 psi

2015105 25 30 35 40 45 50 55

1 1.5

0.2

P1=35 psi

P1=25 psi P1=50 psiP1=75 psi

0 1.510.5

201510 25 30 35 405

P1=10 psi

P1=25 psi

P1=35 psi

P1=50 psi

2015105 25 30 35 40 45 50 55

0 0.5 1 1.5

0.70.60.5

P1=25 psi

P1=35 psi

P1=50 psi


P1=25 psi

P1=35 psi

P1=50 psi

20

15

10

5

00

Air Flow (SCFM)0.5 1 1.5 2

0

0.40.6

10.8

1.2

Outle

t Pre

ssur

e (ba

r)

0.2

1.41.6

20155 55Air Flow (L/min)

10 25 30 5035 40 45

Outle

t Pre

ssur

e (ps

i)



-10-








0.50

1

1.522.53

0

0 1 20

1

230

25

20

1510

5

0

1.5

0.5

0 0

0.5

1.5

235302520

0

1

2.54045 3

00

0.5

1201510

0

1.5

3035

2

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)



Air Flow (SCFM)


Air Flow (SCFM)Air Flow (SCFM)0.5 1.5


00.5

2.5340

30

20

0

2

3.550

60 4

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)0

1.5

2015105 25 30 35 40 45 50 55

15105 25 30 45 50 55403520

3025201510

5

3540

0 10.5 1.50

1

2

1.5

0.5

2

2.5

0 10.5 1.5 20

3025201510

5

35404550 15105 45 50 55403520 25 30

P1=35 psi P1=50 psi P1=75 psiP1=100 psi

P1=50 psi



2015105 25 30 35 40 45 50 55

25

5

1 20.5 1.5

1 20.5 1.5

1 20.5 1.5

2015105 25 30 35 40 45 50 55

2015105 25 30 35 40 45 50 55

1510

5

110

P1=75 psiP1=100 psi


P1=35 psi P1=50 psiP1=75 psi P1=100 psi










10

2

3

4

56

0

0 1 2 0

1

460

50

40

30

10

0

1.5

0.5

00

2

3

70605040

01

4

805

000.51

403020

0

46070 4.5

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)



Air Flow (SCFM)



0.5 1.5

2015105 25 30 35 40 45 50 55

15105 25 30 45 50 55403520

40302010

5060

0 10.5 1.50

3

4

2

2

5

0 10.5 1.5 20

302010

50

708090

15105 45 50 55403520 25 30

P1=75 psi

P1=100 psi


P1=100 psi

2015105 25 30 35 40 45 50 55

50

10

1 20.5 1.5

1 20.5 1.5

2015105 25 30 35 40 45 50 55

302010


P1=75 psiP1=100 psi

20

3.532.52

7080

1

40

60

1.522.533.5

-11-




-12-








0.20

0.4

0.6

0.81

1.2

0

0 10

0.08

0.121.81.61.41.2

10.8

0

0.1

0.04

000.1

0.50.68

6

4

2

0

0.3

0.710

12 0.8

00

0.05

0.11.5

1

0

0.152.5

3 0.2

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)


Air Flow (SCFM)


Air Flow (SCFM)Air Flow (SCFM)0.5 1.5


00.2

11.2

15

10

5

0

0.8

1.420

251.6

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)

0.6

2015105 25 30 35 40

15 45 60 105120 135907530

5432

1

6

7

0 31 50

0.15

0.4

0.3

0.1

0.45

0 21 3 40

108642

12141618

P1=10 psi P1=50 psi

P1=75 psiP1=100 psi



2

0.5

1 32

2 41 3

20 40 60 80 100 120 140 160

0.4P1=75 psi P1=100 psi

P1=50 psi P1=75 psi

P1=100 psi

P1=35 psiP1=50 psi

P1=75 psiP1=100 psi

0.60.40.2

0.06

0.02

P1=35 psiP1=25 psi

5

2 4P1=35 psi

P1=25 psiP1=10 psi

0.35

0.250.2

0.05

15 45 60 105120 135907530

15 45 60 105120 135907530

P1=50 psi

P1=35 psi

P1=25 psi

2010 30 40 6050

P1=25 psiP1=10 psi

Air Flow (L/min)

5

0.2

0.4

P1=35 psi

P1=25 psi

0 21 3 4 5 6

P1=50 psi

P1=35 psi

P1=25 psi





-13-






0.50

11.52

2.53

0

0 40

1

230

25

2015

10

0

1.5

00

0.5

2.5

3

35302520

0

1.5

4045

0

0.5

11510

0

1.52530 2

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)


Air Flow (SCFM)


Air Flow (SCFM)Air Flow (SCFM)1 5


00.5

2.53

30

20

100

2

3.5

40

504

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)

1.5

80604020 100 120 140 160

20 60 80 140 16012010040

3025201510

3540

0 31 50

2

1

2.5

0 21 3 40

252015105

30354045

P1=50 psi

P1=75 psiP1=100 psi

P1=50 psi P1=75 psiP1=100 psi


20

5

2 41 3

20 40 60 80 100 120 140 160

1


P1=50 psi P1=75 psi P1=100 psi

P1=35 psi P1=50 psi

P1=75 psi

P1=100 psi

0.5

P1=35 psi

5

2 4

1.5

0.5

20 60 120 140 1601007540

20 60 120 140 1601008040Air Flow (L/min)

5

1

2

0 21 3 4 5 6

5

2 3 6

5

6

6

50 60

6

0 2 41 3 5 6

80604020 100 120 140 16035

1510

5


-14-








1

0

2

34

5

6

0 50

3.5

4.5706050403020

0

4

2.5

0

403020100

5060

0

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (L/min)


Air Flow (SCFM)


Air Flow (SCFM)Air Flow (SCFM)2 6

80604020 100 120 140 160

0 31 50

4

2

5

0 21 3 40

5040302010

60708090



P1=100 psi

1 32

2 41 3


P1=75 psiP1=100 psi

10

3

2

5

2 4

3

1

Air Flow (L/min)

5

1.510.5

431

80604020 100 120 140 160

706050403020

010

80

6

80604020 100 120 140 160

80604020 100 120 140 160

80604020 100 120 140 160

6

6

7080

0

4

2

5

3

1

0

4.54

3

21.510.5

2.5

3.5

5 64

706050403020

010




-15-







0 3 7 8 9

0.20

0.4

0.6

0.8

1

1.21801209030

1816141210

86420

0 2 5 8

0.050

0.10.150.2

0.30.35

200125100256

5

4

3

2

1

0

0.25

0.4

0 1 2 30

0.04

0.06

0.08

0.1

80502010

1.21

0.80.60.40.2

0

1.4

0.02

0 1 3 600.10.20.3

0.50.6

100755025

86

4

2

0

0.4

0.7

4 5 7

10

12125 150 175 225

0.8

0 200.020.040.06

0.10.12

6015

1.5

1

0.5

0

0.08

0.14

4

2

2.5105 135

0.16

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)



Air Flow (SCFM)




P1=50 psi P1=75 psi

P1=100 psi

1 3 5


100.20.4

11.2

1601208040

15

10

5

0

0.8

1.4

6 9 10

20

25200 240 280

1.6

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)0

150

P1=10 psi

P1=25 psi

P1=35 psiP1=50 psi

P1=75 psi

P1=100 psi

P1-25 psi P1-100 psiP1-75 psiP1-50 psi

P1-35 psi

P1=10 psi

P1=25 psi P1=35 psi P1=50 psi

P1=100 psi

P1=75 psi

P1=100 psiP1=75 psi

P1=50 psi

P1=35 psiP1=25 psi

P1=100 psiP1=75 psiP1=50 psi

P1=35 psi

P1=25 psi0.6

30 40 60 701.6 30 45 75 90 120

1 3 4 6 7

50 75 150 175 225

65421

60 210 240

200

2 8

2 3 4 5 7 8



-16-







0

0.5

0

11.5

2.52

3

2001208040

4045

353025201510

50

0 1 4 7

0.5

0

1

1.5

2

2.5

240200120804035

2520

1050

0 5 8 9

1

0

1.5

21601208040

25

20

15

10

5

010

30

0.5

000.5

1

1.5

2.5

3

20151050

22530

0

1

1.52520

1510

30

35

2

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)



Air Flow (SCFM)



P1=35 psi

P1=50 psi

P1=75 psi

P1=100 psi


00.51

22.5

30

20

10

0

1.5

34050 3.5

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)

Air Flow (SCFM)

160

200

40

15

30

50

50

0.5

354045

60 4

240 280

762 431

280160

2 3 5 6 8 9 10

240 280

P1=50 psi


1 6 9 102 3 4 5 7 8

1601208040 200 240 280

0 5 8 1062 431 7 9

40 280160 24020012080

1 4 72 3 5 6 8 9 10

P1=75 psi

P1=100 psi

P1-35 psi P1-50 psi

P1-75 psi P1-100 psi

P1=50 psi

P1=75 psiP1=100 psi

0 1 6 92 3 4 5 7 8 10

20012080 160 24040 280

P1=75 psiP1=100 psi


-17-







0

1

0

2

3

5

4

62001208040

8090

70605040302010

0

0 1 4 7

1

0

2

3

4

5

240200120808070

5040

2010

0

0 5 8 9

1

0

1.52

1601208040

50

40

30

20

10

010

60

0.5

0 0

1

3

4

5

20

80

100

2

60

30

0

2.5

1.5

50

403020

6070

4.5

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ps

i)

Outle

t Pre

ssur

e (ps

i)Ou

tlet P

ress

ure (

psi)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)Ou

tlet P

ress

ure (

bar)

Outle

t Pre

ssur

e (ba

r)

Air Flow (L/min)



Air Flow (SCFM)



P1=35 psi

P1=50 psi


160

200

40

30

60

100 0.5

70

4050

240 280

762 431

280160

2 3 5 6 8 9 10

240 280


1 6 9 102 3 4 5 7 8

1601208040 200 240 280

0 5 8 1062 431 7 9

40 280160 24020012080

1 4 72 3 5 6 8 9 10

P1-100 psi

P1=75 psiP1=100 psi

P1=75 psiP1=100 psi

2.53

43.5

43.53

2

1


JSRLFLP/0914/AB

Steriflow Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at www.steriflowvalve.com for the latest information on our products.


orDering schematic

Model Size Material/

1 & 2 3 & 4 5 & 6 7 & 8 9 & 10 11 & 12 13 & 14 15 16 17— —

ModelJSRLFLP Low Flow Low Pressure Reducing Valve

Size025 1/4" (DN08)038 3/8" (DN10)050 1/2" (DN15)

Material6L ASTM A479, 316L

1 & 2 Body FeatureEnd Connection Port Configuration

A FNPT, 1/4" A Port "A"B FNPT, 3/8" B Port "B"C FNPT, 1/2" C Port "C"T ASME BPE Tri-Clamp, 1/2" D Port "D"W ASME BPE Tube Weld, 1/2" E Port "E"S1 ISO Tri-Clamp, DN15V1 ISO w/ 34.0mm face T-Clamp, DN15R1 ISO T-Clamp, DN20D2 DIN Tri-Clamp, DN15V2 DIN T-Clamp, DN15 w/50.5mm faceU2 DIN T-Clamp, DN20X2 DIN T-Clamp, DN20 w/50.5mm faceM3 DIN Tube Weld, DN15H4 ISO Tube Weld, DN15ZZ Non-Standard

1 Acc. to DIN 32676 Row B (ISO 1127). See dimensions, page 32 Acc. to DIN 32676 Row A (DIN 11850). See dimensions, page 33 Acc. to DIN 11866, DIN 11850 Row A4 Acc. to DIN 11866 Row B, (ISO 1127)

3 & 4 Trim1S Cv 0.012 (Kv 0,010)4S* Cv 0.03 (Kv 0,026)2S Cv 0.08 (Kv 0,069)3S Cv 0.2 (Kv 0,173)1R Cv 0.012 Self-Relieving4R* CV 0.03 Self-Relieving2R Cv 0.08 Self-Relieving3R Cv 0.2 Self-RelievingZZ Non-Standard

* Though out of sequence, "4S" and "4R" are the correct order codes for Cv 0.03

5 & 6 Seat Material - FDA & USP Class VIT1 PTFE Cv 0.012 P2 PEEK Cv 0.08T2 PTFE Cv 0.08 P3 PEEK Cv 0.2T3 PTFE Cv 0.2 P4 PEEK Cv 0.03T4 PTFE Cv 0.03

ZZ Non-StandardP1 PEEK Cv 0.012

11 & 12 ActuatorSK Standard Actuator

AK Autoclavable Anodized Aluminum Knob available as cataloged option

CV Captured VentPM Panel MountTP Anti-tamper feature (See illustration page 3)ZZ Non-Standard

13 & 14 Inlet GaugeAA 0 - 30 psi / bar (Dual) BB 0 - 60 psig / bar (Dual)CC 0 - 100 psig / bar (Dual)DD 0 - 160 psig / bar (Dual)NN NoneZZ Non-Standard

15 Outlet GaugeD 0 - 15 psig/bar (Dual)A 0 - 30 psig/bar (Dual)B 0 - 60 psig / bar (Dual)C 0 - 100 psig / bar (Dual)N NoneZ Non-Standard

16 SEP ComplianceG SEP CompliantØ NoneZ Non-Standard

17 AccessoriesS Clean For Oil FreeX Clean For OxygenØ NoneZ Non-Standard

7 & 8 Range Spring / Outlet PressureE1 1 - 75 psiE2 25 - 100 psiZZ Non-Standard

9 & 10 Diaphragm MaterialJL JorlonTM PTFE, FDA & USP Class VIZZ Non-Standard

jsrlflp series - induchem group · sparging, blanketing, motive force, or sud bag inflation, ......

Documents