js1_se_qsg_zeemote

8/3/2019 JS1_SE_QSG_Zeemote

1/5

SONY ERICSSON USER GUIDE


2/5

Thank you for purchasing the Zeemote JS1

V3 Bluetooth Mobile Gaming Controller.

The Zeemote JS1 V3 is designed to provide you with hours of

the Worlds Best Mobile Gaming Experience!

The Zeemote JS1 V3 Controller uses two AAA batteries. Followdirections below to insert the batteries. Once the battery door

has been removed there is a +/- diagram on the body of the

JS1 V3 that shows you the proper way to insert the batteries.

Getting Started

1. Consult your packaging materials, or visit

WWW.ZEEMOTE.COM/SONYERICSSON to make sure

your phone is compatible with the Zeemote JS1 V3 con-

troller received with this User Guide. If not, please follow

the steps in the alternative Zeemote User Guide.

2. Insert the batteries into your Zeemote JS1 V3 Controller

3. Turn on your phone

4. Navigate to Menu -> Settings ->Connectivity, and

choose Bluetooth

5. Make sure Bluetooth is turned on.

6. Press and hold the Power / D Button for 3 seconds until

the indicator light begins to flash.

2 3

Squeeze battery

door on both sides

Slide door up

then out

Insert batteries(note the way theyshould be inserted)

Power / D Button:Hold for 3 seconds to turn device on or ofOnce connected, D maps to the Left Soft Key

C Button:Tap to connect automaticallyOnce connected, C maps to the Right Soft Key

Indicator Light:Flashing - ready to connectFlashing rapidly - connectingFlashing slowly - connected

Battery Cover

LanyardAnchor

Joystick:Maps toNavigationcontrols

B Button:Maps to theBack key ifavailable, orto Select keyif not

A Button:Maps toSelect key

Zeemote JS1 V3


3/5

4

7. Go to My devices, and choose New device. Your

phone will now search for the Zeemote JS1 V3.

8. Select Zeemote JS1 V3 from the list of found devices.

Enter 0000 for a passcode. If asked whether to allow

the controller to connect to your phone, choose Yes. A

message will appear on the phone, indicating that the

Zeemote JS1 V3 has been added to your devices.

9. Now tap the C button on the Zeemote JS1 V3 controller.The indicator light on the controller will flash rapidly

while connecting automatically to your phone. When the

Zeemote JS1 V3 is connected, the indicator light on

the controller will flash slowly.

10. Using the Zeemote JS1 V3 Controller, you are now

ready to navigate the phone menus, control your Apps,

and experience the best in Mobile Gaming! Move the

thumbstick, tap the buttons and see what happens!

11. To replay, simply power on your phone, make sureBluetooth is on, then press and hold the D button

or 3 seconds to turn on the Zeemote JS1 V3 Bluetooth

Controller. The Zeemote JS1 V3 will automatically

connect with your phone and you will be ready to play!

Note: If automatic connection with your phone did

not work the first time, try tapping the C-button

to connect again.

12. To set up the Zeemote JS1 V3 with a different phone,

first turn off the JS1 V3. Then, press and hold Buttons A,

B, and D for 3 seconds. This will reset the controller to its

factory default state. Determine if your new Sony Ericsson

phone is compatible and then repeat the one-time setup.

FOR MORE INFORMATION, TROUBLESHOOTING, AND TO

REGISTER YOUR ZEEMOTE JS1 V3 CONTROLLER, PLEASE VISITWWW.ZEEMOTE.COM/SUPPORT. TO CONTACT CUSTOMER

SUPPORT SIMPLY EMAIL [email protected]


4/5


5/5

2008-2009 Zeemote, Inc. All rights reserved. Zeemote, Zeekey,Zeemote Ready and Z Design are trademarks of Zeemote, Inc.throughout the world. Zeemote is a registered trademark of Zeemotein the United States and other countries. The Bluetooth word markand logos are owned by the Bluetooth SIG and any use of such marksby Zeemote, Inc. is under license. Other trademarks and trade namesare those of their respective owners

Zeemote, Inc.

285 Mill RoadChelmsford, MA 01824

www.zeemote.com

US Patent No. 7,280,097 and US Design Patent No. 589515;

Other Patents Pending

js1_se_qsg_zeemote

Documents