jr3050t powerful 9.0a motor increase cutting efficiency

2
A world's leading manufacturer of power tools Recipro Saw JR3050T Powerful 9.0A motor increase cutting efficiency Powerful 9.0A motor increase cutting efficiency

Upload: others

Post on 10-Dec-2021

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: JR3050T Powerful 9.0A motor increase cutting efficiency

A world's leading manufacturer of power tools

Recipro Saw

JR3050T

Powerful 9.0A motor increasecutting efficiency

Powerful 9.0A motor increasecutting efficiency

Page 2: JR3050T Powerful 9.0A motor increase cutting efficiency

A world's leading manufacturer of power tools

Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502, JapanPRINTED IN JAPAN Z23154-2 2004-11

SPECIFICATIONS STANDARD EQUIPMENT

Well ballanced Tool designWell ballanced Tool designfor better handlingfor better handlingWell ballanced Tool designfor better handling

Tool-less Blade Change

Dustproof and Dripproof Design

Recipro Saw Blade Set (No.21, 22, 23 : 1 each)

Please see. General Catalogue.

Push-in Lock System has made it possible to attach the blade quickly.

1. Front side of the slider is protected against saw-dust by; 1) Air from the fan that sweeps saw-dust 2) X ring and Felt that seal out saw-dust from the gear room

2. Gear room is also protected against water drops by a rubber seal ring.

Continuous rating Input

Capacity

Length of stroke

Strokes per min.

Overall length

Net weight

Power supply cord

1,010W

in pipe : 90 mm (3-1/2")

in wood : 90 mm (3-1/2")

28 mm (1-1/8")

0-2,800

452 mm (17-3/4")

3.2 kg (7.1 lbs)

2.5 m (8.2 ft.)

OPTIONAL ACCESSORIES

Items of standard equipment may differ from country to country.

Specifications may differ from country to country.

Performance Data• Comparison of cutting speed

For Wood: Used Makita Blade No.23. For Metal: Used the standard Blade of each Blade. • The numbers in the charts above are relative values when the capacity of Competitor "M" is indexed at 100.• The test results may differ under some conditions.

2"x10" spruce timber

Test conditions: Cut a piece of 2"x10" spruce timber and a 1" carbon steel pipe for plumbingwith each supplied saw blade (for wood or for metal), and measured the time required.

1" carbon steel pipe for plumbing

230

100

200

150

135

100

130

120

Slow

0

Slow FastFast

Competitor "M"

Competitor "D"

Competitor "P"

Makita JR3050T

Competitor "M"

Competitor "D"

Competitor "P"

Makita JR3050T

Tool-less shoe AdjustmentPush the red button for adjusting shoe position.

Soft Grip Large Trigger Switch