johnston 1958

6
EDTA AND COMPLEX FORMATION BY THEIR nature general textbooks often lag by many years in their inclusion of salient advances in analytical reagents. Teachers are aware of this lag when con- fronted with the necessity of up-dating lectures and courses. Often this requires tedious collection and digestion of data scattered through the world literature. Such is the case with EDTA. Only a few current textbooks devote space to this versatile titrant, mask- ing agent, and chromogenic agent. A few books confine their remarks to the EDTA titration of water hardness, but give only limited background information even for this special application. It is the purpose of this paper to aid in resolving this problem by presenting some integrated experiments designed to serve as a general introduction to water- soluble chelates, and especially to EDTA and its use in analytical chemistry. These experiments also deline- ate some special aspects of metal complexes that are sometimes a source of practical difficulty, and that, on the other hand, can sometimes be applied to advantage in chemical analysis. The experiments are scaled to serve as lecture demonstrations; however, they can he readily adapted to student use by employing the same reagent solutions and reducing the volumes employed appropriately (with the exception of Experiment IX which can he performed as given). All of the reagent solutions, with two exceptions, can be readily prepared from reagent chemicals availahle (After Martell) VOLUME 35, NO. 12, DECEMBER, 1958 A Demonstration Lecture M. B. JOHNSTON and A. J. BARNARD, Jr. J. T. Baker Chemical Company, Phillipsburg, New Jersey H. A. FLASCHKA Georgia Institute of Technology, Atlanta, Georgia in most instructional laboratories. The two special reagents, disodium ethylenediaminetetraacetate dihy- drate and Eriochrome Black T (Erie T for short), are readily available through laboratory supply houses. The intention is not merely to give 'Lcook-book" recipes but also to provide some background informa- tion by discussion of the experimental phenomena. This information can only he presented briefly and in summary form. Hence, a selected bibliography is ap- pended that cites some relevant monographs (1-4), re- views (5-11), trade literature (13-id), and a few papers of historic interest (10,15-17). EDTA is the alphabetic designation for ethylene- diaminetetraacetic acid or its anion form ethylene- diaminetetraacetate. HOOC-H,C CHrCOOR )N.cH~cH,N< HOOGHC CHrCOOH Ethylenediaminetetraacetic acid NaOOC.H& CHrCOONa [ HWC CH&OOH Disodium ethylenediaminetetrrtacetilte dihydrate Because of the very low water solubility of the free acid, a solution of the disodium salt is usually employed as the reagent. The usefulness of EDTA stems from the presence of six ligand groups which permits hond- ing with an equal number of coordination positions of a metal ion. In almost all cases a 1:l metal-EDTA complex (chelate) is formed and in a single step. The presence of carboxylic acid groups confers water solu- bility on such metal complexes. The steric configura- tion (18) of a metal-EDTA complex is shown in the figure. A fuller treatment of the theoretical back- ground for the use of EDTA will be found in works cited in the bibliography (1-4, 10-11,16-18). The following sections of this paper present the direc- tions for the preparation of the required reagents, followed by the experiments. The experiments are arranged so that the principles or phenomena to be studied are briefly summarized followed by working directions into which are interpolated brief statements concerning the observations. The final experiment (IX) is an actual EDTA titra- tion. Rather than a study of the simple titration of a

Upload: mireliz-corilloclla-huamani

Post on 12-Jul-2016

231 views

Category:

Documents


0 download

DESCRIPTION

edta y complexometria

TRANSCRIPT

Page 1: Johnston 1958

EDTA AND COMPLEX FORMATION

BY THEIR nature general textbooks often lag by many years in their inclusion of salient advances in analytical reagents. Teachers are aware of this lag when con- fronted with the necessity of up-dating lectures and courses. Often this requires tedious collection and digestion of data scattered through the world literature. Such is the case with EDTA. Only a few current textbooks devote space to this versatile titrant, mask- ing agent, and chromogenic agent. A few books confine their remarks to the EDTA titration of water hardness, but give only limited background information even for this special application.

It is the purpose of this paper to aid in resolving this problem by presenting some integrated experiments designed to serve as a general introduction to water- soluble chelates, and especially to EDTA and its use in analytical chemistry. These experiments also deline- ate some special aspects of metal complexes that are sometimes a source of practical difficulty, and that, on the other hand, can sometimes be applied to advantage in chemical analysis. The experiments are scaled to serve as lecture demonstrations; however, they can he readily adapted to student use by employing the same reagent solutions and reducing the volumes employed appropriately (with the exception of Experiment IX which can he performed as given).

All of the reagent solutions, with two exceptions, can be readily prepared from reagent chemicals availahle

(After Martell)

VOLUME 35, NO. 12, DECEMBER, 1958

A Demonstration Lecture

M. B. JOHNSTON and A. J. BARNARD, Jr. J. T. Baker Chemical Company, Phillipsburg, New Jersey H. A. FLASCHKA Georgia Institute of Technology, Atlanta, Georgia

in most instructional laboratories. The two special reagents, disodium ethylenediaminetetraacetate dihy- drate and Eriochrome Black T (Erie T for short), are readily available through laboratory supply houses.

The intention is not merely to give 'Lcook-book" recipes but also to provide some background informa- tion by discussion of the experimental phenomena. This information can only he presented briefly and in summary form. Hence, a selected bibliography is ap- pended that cites some relevant monographs (1-4), re- views (5-11), trade literature (13-id), and a few papers of historic interest (10,15-17).

EDTA is the alphabetic designation for ethylene- diaminetetraacetic acid or its anion form ethylene- diaminetetraacetate.

HOOC-H,C CHrCOOR )N.cH~cH,N<

HOOGHC CHrCOOH Ethylenediaminetetraacetic acid

NaOOC.H& CHrCOONa [ HWCH1y< CH&OOH

Disodium ethylenediaminetetrrtacetilte dihydrate

Because of the very low water solubility of the free acid, a solution of the disodium salt is usually employed as the reagent. The usefulness of EDTA stems from the presence of six ligand groups which permits hond- ing with an equal number of coordination positions of a metal ion. In almost all cases a 1:l metal-EDTA complex (chelate) is formed and in a single step. The presence of carboxylic acid groups confers water solu- bility on such metal complexes. The steric configura- tion (18) of a metal-EDTA complex is shown in the figure. A fuller treatment of the theoretical back- ground for the use of EDTA will be found in works cited in the bibliography (1-4, 10-11,16-18).

The following sections of this paper present the direc- tions for the preparation of the required reagents, followed by the experiments. The experiments are arranged so that the principles or phenomena to be studied are briefly summarized followed by working directions into which are interpolated brief statements concerning the observations.

The final experiment (IX) is an actual EDTA titra- tion. Rather than a study of the simple titration of a

Page 2: Johnston 1958

single metal ion in pure solution, a slightly more com- plicated example has been selected which familarizes the student with such phenomena as indicator-blocking and masking. This titration can be performed either as a lecture experiment or as an actual student laboratory determination (using, if desired, "unknown" solutio& or mixtures of magnesium and iron(II1) salts).

REAGENTS

The following directions yield amounts sufficient to conduct Experiments I through VIII twice, and Ex- periment IX about twenty times if it is to be conducted quantitatively as a student exercise. All chemicals employed should be of reagent grade.

EDTA, 0.1 M . Dissolve 18.6 g. of disodium ethylenediaminp tetraacetate dihydrate; dilute to 500 ml. with H20.

Stock water. Use exclusively water free of metal ions, either carefully redistilled or deionized via cation exchange. (Often "distilled" water contains interfering amounts of metals.) For demonstration purposes (is., except in Expt. IIID or in Expt. IX, when conducted quantitrttively), ordinary distilled water may be used if interferences are excluded by addition of 5 drops of 0.1 M EDTA per liter.

Erio T solution. Dissolve 0.1 g. of Eriochrome Black T in 25 ml. of methanol (must be freshly prepared); alternatively, use a 1: 100 ground mixture with NaCl (indefinitely stable).

Buffer, pH 10. Dissolve 35.0 g. of NHCI in 200 ml. aqueous NH, (taken directly from supplier's battle); dilute to 500 ml. with H20.

Buffer, pH 6. Dissolve 21.8 g. of sodium acetate trihydrate and 5.2 ml. of glacial acetic acid in H20; dilute to 250 ml. with HZO.

Buffer, pH 5. Dissolve 2.7 g. of sodium acetate trihydrate in 19.2 ml. of 1 M HC1; dilute to 100 ml. with H20.

Metal salt solutions. Prepare 100 ml. of 0.1 M aqueous salu- tions of the following salts: BaCL, Cr(NO,),, Ni(NO&, K2CreOi, Zn(NO&, and 200 ml. of the following: Mg(NOa)., FeCl..

Bismuth nitrate, 0.1 M . Dissolve 4.9 g. of Bi(NOa)r5H?0 in 3 ml. of coned. HNOs and 10 ml. of H20. When solution is com- plete, dilute to 100 ml. with H20. (Do not employ heat to effect &lution.)

Other s~lutions include methyl orange (0.1 g./lW ml. of H20), 100 ml. 15% KI, 10 ml. 10% (NHJaSO,, 100 ml. 1 M NaOH, 100 ml. 1 M HC1,3% H202. Solid reagenk include KCN, tartaric acid, ascorbic acid (re-

agent ar U.S.P.). Standard Solutions for Ezpt. I X . Use only deionized or redis-

tilled water in the preparation and comparison of the following standard solutions.

EDTA, 0.0100 M . Dry about 4 g. of reagent grade disodium ethylenediaminetetraitcetate at 80°C. for about 2 hours. Weigh accuratelv 3.722 e. of this dried material, dissolve in and dilute with ~ . d to o n e h e r in a volumetric flabk. Transfer the salu- tion at once to a polyethylene bottle for storage.

Mapesium ni t~afe standardized soh. Dilute 50 ml. of the 0.1 M Mg(NOa)% to 500 ml. with H.O. Compare this solution with the 0.0100 M EDTA as follows: Pipet 25 ml. of this Mg(NO& solution into a 100-ml. beaker, add 10 ml. of pH 10 buffer, and dilute to 50 ml. with H?O. Add a few crystals of KCN (to avoid any possible indicetor blocking by trace heavy metals), a few drops of Erio T solution, and titrete with the 0.0100 M EDTA until the last tint of red has just disappeared. Preferably warm the solution slightly during the titration because the rate of reaction between the megnesium-indicator complex and EDTA is somewhat slow st room temperature. (One ml. of 0.0100 M EDTA = 0.2432 mg, of magnesium.)

EXPERIMENTS

Experiment I. The Metal Indicator

Metal indicators are sensitive to changes in pM, that is, the negative logarithm of the concentration of the "free" metal ion. (The "free" metal ion, of course, may be in the form of such solution complexes as acetato, chloro, aquo, etc.) Metal indicators form complexes

with various metals that differ markedly in color from that of the free, "unmetallized" indicator. Metal indicators in general also show more or less pronounced color changes with changes in pH. The present ex- periment demonstrates the metal indicator activity of Erio T as well as its pH-sensitivity. This dye shows a wine red color in strongly acidic solution, which passes to a dark blue color in the pH interval 6 to 7, and this to a red a t 11 to 12. The metal complexes formed by the dye in the pH range of about 6.5 to 11, are usually red.

In each of five vessels place 90 ml. of stock H,O and 3 drops of Erio T solution and stir. Use these solutions in the following exoeriments.

Ezpl. IA. To the first vessel add 10 ml. of pH 10 buffer. Stir. Note the blue solution oolor.

Ezpt. IB. To the second vessel add 10 ml. of 1 M HCI. Stir. Note the red color.

Ezpt. ZC. To the third vessel add 10 ml. of 1 M NaOH. Stir. Note the red color and contrast the shade developed in Expt. IB.

(If desired, a single solution of the dye may be carried through the chanees in color: however. the ~roeressive dilution creates a

Before performing the following experiments, ex- plain that the use of a buffered medium assures that no change in hydrogen ion concentration occurs, and that therefore color changes observed must be due to a re- action of the metal ion with the dye (metal indicator). The sensitivity of the reaction of metal ions with Erio T is amazingly high. Even or 10-% M Mg(NO8)? solutions give a faint red tint (see also Expt. IIID).

Ezpl. ID. To the fourth vessel, add 10 ml. of pH 10 buffer. Stir. Note the color is the same as that in Expt. IA. Now add one drop of 0.1 M Mg(NO&. Note the immediate color change from blue to red.

Ezpt. IE. Repeat Expt. I D substituting one drop of 0.1 M Zn(NO.)l. Note the color change from blue to a red differing somewhat in shade from that obtained in Expt. ID.

Before performing the following experiment, it may be explained that a metal and hydrogen ion (both cations) compete for the metal indicator. Hence, a pH range must be selected in which the metal can compete successfully if the dye is to serve for the detec- tion of a metal.

Ezpt. I F . Add one drop of 0.1 M Zn(N0a)s to the solution from Expt. IB (i.e., the eecond vessel). Note that the solution color is unchanged.

Experiment 11. Metal Complex Formation

EDTA reacts with many polyvalent metal ions to form water-aoluble metal complexes. EDTA is a tetrabasic acid. Two hydrogens have strongly acidic properties: the other two are only weakly acidic. The anion species predominating in about neutral solution may therefore be written as HzY-$. If complexation occurs, this anion is engaged completely and hydrogen ion is liberated. This can be expressed for a divalent metal ion, M+?, in the form of the following equation:

I t may be explained that the further this reaction proceeds to the right, the greater is the stability of the metal complex, and the greater the acidity produced. Under certain circumstances this increase in acidity

JOURNAL OF CHEMICAL EDUCATION

Page 3: Johnston 1958

can serve as a basis of calculating the stability constant of the metal-EDTA complex.

The phenomenon of complexation is demonstrated in the followinn exneriments in two wavs: The increase in - . acidity on the mixing of neutralized solutions of a metal salt and of EDTA is visualized by use of an acid-base indicator. Further, the formation of a colored metal- EDTA complex is shown.

Ezpt. IIA. Add 10 ml. of 0.1 M Zn(NO& and 3 drops of methyl orange solution to 90 ml. of stoek H20. Prepare a. second solution containing 10 ml. of 0.1 M EDTA, 3 drops of methyl orange solution, and 90 ml. of H?O. Nate that both solutions sre yellow (if not, add aqueous NH8 drapwise rts necessary). Now pour bath solutions simultaneously into a large beaker or a large cylinder. Note the color change from yellow to red. (If desired, in a psrsllel experiment the Zn(NO& and EDTA solu- tions can he mixed without addition of methyl orange: thus ascer- taining that the zinc-EDTA complex is colorless.)

The color of the EDTA complex of some metals is different from that of the "free" metal ion. This can serve to demonstrat,e complexation. (Reference to the classical complexation of copper(I1) with ammonia may he expedient.)

Ezpt. IIB. To each of two vessels, add 10 ml. of 0.1 M Ni(NO&, 20 ml. of pH 5 buffer and 60 ml. of stock H.O. Nate the green solution color of the "free" nickel ion. To one vessel add 10 ml. of 0.1 M EDTA. Note the color change from green to blue indicating formation of the nickel(I1)-EDTA complex. To the second vessel add 10 ml. of stock H20 so that the final volumes are identical in both vessels. Save both salutians for comparison purposes in Expt. IV.

Ezpt. IIC. To a third vessel add 10 ml. of 0.1 M EDTA, 20 ml. of pH 5 buffer, 60 ml. of H.0, and then 10 ml. of 0.1 M NifNO.1,. Note the formation of the hlue color of the nickel(II1- E d ~ ~ - & n p l e x , thus indioating that the order of the a d d k i n of reagents has no effect.

Complexation is also demonstrated hy formation of a colored cbromium(I1I)-EDTA complex in Expt. V. If an additional experiment is desired, the pink cohalt(I1)-EDTA complex may be developed in stock HzO buffered to p H 10.

Experiment 111. Complexation and the Metal Indicator

The formation of a metal complex by the metal in- dicator Erio T as seen in Experiment I is an example of compl?xation. The following experiments demonstrate how EDTA, by forming a stronger complex, can ab- stract a metal from its complex with thie indicator. It may be explained that. this is the basis of a visual detec- tion of the end point in the EDTA titration. This titration was introduced by G. Schwarzenbach (15-I?), and Expt. I I ID was originally suggested by him (17).

Ezpt. IIIA. Add 5 ml. of 0.1 M Mg(NO& to 90 ml. of stock H.0 and then 10 ml. of p H 10 buffer. Now add 10 ml. of 0.1 M EDTA. Note the solution remains colorless; hence, the mag- nesium-EDTA complex is colorless.

Ezpt. IIIB. Add 3 drops of Erio T solution to 90 ml. of stock water and then 10 ml. of pH buffer. Note the blue eolor of the "free" dye (as already seen in Expt. IA). Now add 10 ml. of 0.1 M EDTA. Note the eolor is not changed; hence, there is no "complication" due to a color reaction of the dye with EDTA.

Ezpt. IIIC. Add 3 drops of Erio T solution to 90 ml. of stack H20 and then 10 ml. of pH 10 buffer. Now add 5 ml. of 0.1 M Mg(N0d1. Note the red color of the metal-dye complex (its already seen in Expt. ID). Now add an amount of 0.1 M EDTA greater than 5 ml. Note that the color reverts to that of the "free" (unmetallized) dye. (If desired, the mobile character of the system can he demonstrated by alternate additions of the metal salt and EDTA solutions.)

The release of metal ions (mainly calcium) from soft glass is an impressive demonstration of the sensitivity

of a metal indicator and also emphasizes the principles illustrated in Expt. IIIC. The following experiment also delineates that soft glass vessels should be avoided in analytical work with EDTA and metal indicators, especially on the micro scale and with dilute solutions.

Ezpt. IUD. Take a soft glass container of capacity greater than 100 ml., preferably s, new bottle not yet placed in use. Rinse thoroughly with redistilled or deionized H*O( not with the prepared stock 8 0 containing EDTA). Place 80 ml. of redis- tilled or deionized H 9 0 in the bottle, and add 10 ml. of buffer pH 10 and 2 drops of Erio T solution. The solution should develop a hlue color. If not, add a. very dilute EDTA solution (obtained by 1:5 dilution of 0.1 M EDTA) dropwise until the blue is just reached. Allow to stand for a. short time. Observe the reappearance of the red color due to release of calcium ions from the glass. Add a few more drops of diluted EDTA solution and repeat the process. Take a soft glass rod and scratch the inside wall of the container. Nate the rapid reappearance of the red eolor because the scratched surface delivers large amounts of ions.

Experiment IV. Stability of Complexes

Experiment IIIC demonstrated the difference in the stability of the complex of a single cation, namely magnesium ion, mit,h two different complexing agents, namely a mntnl indicator and EDTA. The following experiment demonstrates the difference in the stability of the complex formed by a single complexing agent, namely EDTA, with two different metals. The experi- ment is based on the addition of nickel(I1) to a bismuth- EDTA solution; the color of the nickel(I1)-EDTA complex does not appear indicating the greater stability of the bismuth-EDTA complex.

Ezpt. IVA. Add 10 ml. of 0.1 M EDTA to 10 ml. of 0.1 M Bi(NO&. Dilute with 50 ml. of H 2 0 and add 20 ml. of pH 5 buffer. Note that the solution is colorless and hence that the hismubh-EDTA eomnlex is colorless. Now add 10 ml. of 0.1 M

experiment use rertsanable care in measuring the volumes of bit- muth nitrate and EDTA solutions to assure that the bismuth ion is not in excess; otherwise a turbidity may appear.)

The following experiments demonstrate how the rela- tive stability of the complexes formed by nickel with Erio T, EDTA and cyanide can he ranked on the basis of simple color reactions. Attention may he called to the fact that stability constants relate to equilib- rium conditions and that false impressions may be reached if reaction rates are not appreciated (see also Expt. V). If desired, it may be explained that Expt. IVB is an example of so-called indicator "blocking" and that the nickel-Erio T complex dissociates only very slowly.

Ezpt. IVB. Add 5 ml. of pH 10 buffer and 3 drops of Erio T solution to 95 ml. of stock H 2 0 Add 2 drops of 0.1 M Ni(NO&. Note the red color indicating the formation of the nickd(I1)-dye complex. Add 0.1 M EDTA dropwise until an appreciable excess (more than 15 drops) is present. Nate that the color of the solution is unchanged. Allow to stand for 15 to 30 minutes, note the blue color of the free dye is slowly attained. (A similar solution, containing only 4 drops of 0.1 M EDTA will undergo the color change in 3 to 4 minutes when warmed to about 70°C., due to tho increase of reaction rate with temperature.)

Ezpt. IVC. Add 5 ml. of pH 10 buffer and 3 drops of 0.1 M EDTA to 95 ml. of stack H20. Add 2 drops of 0.1 M Ni(N0s)s. Now add 3 drops of Erio T solution. Note the blue color of the "free" dye.

Ezpt. IVD. Add 5 ml. of pH 10 buffer and 3 drops of Erio- chrome Black T indicator solution to 95 ml. of stock H.0. Add

VOLUME 35, NO. 12, DECEMBER, 1958

Page 4: Johnston 1958
Page 5: Johnston 1958

SOME IMPLICATIONS OF THE EXPERIMENTS Expt. VIIIB. Repeat Expt. VA or employ the violet solution saved from that experiment. To that solution, add 20 drops of 1 M NaOH. Note the color change from violet to blue.

Experiment IX. The EDTA Titration

An EDTA titration t o a visual end point is demon- strated in principle in Experiment 111. An applied example tha t may be performed either as a lecture demonstration or as a student exercise is the titration of magnesium in the presence of large amounts of iron. The latter is masked by conversion t o the ferrocyanide ion. This example is particularly instructive as most of the steps involve color changes.

I n the masking of iron(III), cyanide must be added in alkaline solution so that formation of hydrocyanic acid is avoided; however, iron(II1) hydroxide would then precipitate. This difficulty is avoided by first adding tartrate ion t o form the soluble iron(II1)- tartrate complex. This complex is then reacted with cyanide ion in alkaline medium to form ferricyanide ion. However, this latter ion will oxidize Erio T and thereby destroy its indicator action. Ferricyanide is therefore reduced t o ferrocyanide by the action of ascorbic acid. This is a slow reaction; hence, warming is necessary. (If applied materials are being analyzed, ferrocyanide ion may form insoluble salts with some cations; in tha t case, dilute the solution sufficiently or employ a back-titration, that is,add an excess of EDTA and back-titrate with a metal salt solution such as magnesium nitrate.) As the rate of reaction of mag- nesium-indicator complex and EDTA is somewhat slow a t room temperature, i t is preferable t o titrate the solu- tion while i t is warm. Calcium, manganese(II), lead, or zinc can be titrated in exactly the same way (and, if present, vill be co-titrated with magnesium).

For a quantitative experiment, employ the standard EDTA and magnesium nitrate solutions given under "Reagents." For a semiquantitative demonstration, merely dilute the 0.1 M EDTA and Mg(NO& solutions tenfold.

To a me~wred amount (10 to 30 m1.l of standard Me(N0.I.. ~~~~ ~~~~~ ~~~ ~ ~ ~~ ~~

add some 0.1 M F~cI, (2 to 4 ml.) &d dilute to a v&m<&f about 50 ml. (More iron can he tolerated without interference, hut the amounts of reagents added in the masking step must then be increased.) Neutralize the diluted sample solution by dropwise addition of dilute NaOH (1 M NaOH diluted 1 :5 with H,O) until a slight turbidity of iron(II1) hydroxide persists. Remove the turbidity with a few dmps of dilute HCI (1 M HC1 diluted 1 :5 with HzO). Add about 0.3 g. of tartaric acid. Note t.he brieht vt.llow solution color iimniII1)-tartrate comnlex). ~~~ ~ ~*~ ~ ~~~~ ~ ~~

Add 20~ml. of pH 10 buffer. ~ o t e t h h the color fades: (if a turbidity occurs, an insufficient amount of tartrate was added.)

Add about 0.2 to 0.3 g. of KCN. Note that the color turns bright yellow (ferricyanide formation). Add about 0.1 g. of ascorbic acid. Note that the color turns to yellow-brown (mixed ferri-femocyanide). Dilute the solution to a volume of about 150 ml. with H?O and heat almost to boiling. Note that the color fades gradually to a faint yellow or to almost colorless (ferrocyanide formation). (If performed as a lecture demonstra- tion, the volume may be increased to 250 ml. or more and hot water used for the dilution.)

Now add a few drops of Erio T solution. (If added before reduction of the ferricyanide is complete, the indicator will he oxidized.) Titrate while the solution is warm with 0.0100 M EDTA untii the last tint of red has just disappeared and the solution color is blue. (One ml. of 0.0100 M EDTA is equivalent to 0.0103 millimoles of the metal titrated or to 0.2432 mg. of magnesium.)

Some of the more direct implications of these ex- periments for analytical chemistry may be summarized. Complexation of metals by EDTA is delineated in Ex-, periment 11, and in the nine experiments EDTA com- plexes are produced with eight cations. The use of EDTA as a titrant in the EDTA titration is demon- strated in principle in Experiment I11 and in detail in Experiment IX. The behavior of a metal indicator and its use in the detection of the end point are explored in Experiments I through IV. The use of cyanide as a masking agent i n the EDTA titration is studied in Experiments IX and IV. The use of EDTA as a masking agent is demonstrated for a precipitation in Experiment VIIA and for the reaction of a metal with a chromogenic agent (Erio T ) in Experiment 111. The use of EDTA as a solubilizing agent is illustrated in Experiment VIIB.

The ability of EDTA to alter the redox equilibrium of a metal system is demonstrated in Experiment VI. This ability finds use in polarography, electroanalysis, and in the EDTA titration in the detection of the end point electrometrically or by the use of redox indicators.

Colored metal-EDTA complexes obtained in Experi- ments 11, IV-VI, a n d VII I suggest how EDTA can serve as a chromogenic agent in photometric deter- minations, detection tests, and in photometric EDTA titrations in which no auxiliary color-former is added.

LITERATURE CITED

(1) BAILAR, J. C., JR., editor, "The Chemistry of Coordination Compounds," Reinhold Publishing Corporation, New York, 1956, 834 pp.

(2) FLASCBKA, H., "EDTA Titrations. Introduction to Theory and Practice," Pergamon Press, London and New York, 1958, in press.

SCHWARZENBACA, G., "The Complexometric Titration," Methuen & Co., Limited, London, and Interscience Pub- lishcrs, Inc., New York, 1957, 132 pp.

WELCHER, F., "The Analytical Uses of Ethylenediamine- tetrmcetic Acid," D. Van Nostrand Companv, Inc., Prinrdnn 10% 3fi5 nn

. with added ihdexes in ref. l d ] :

(6) BARNARD, A. J., JR., W. C. BROAD, AND H. FLASCAKA, "EDTA as a Microa~alvtical Reant ." Mierochemieal e ,

J., 3, NO. l,to appear (is.$. (7) h s c a ~ ~ , H., "Athylendiamin-tetraessigsaure als Maskier-

ungsmittel in der analytischen Chemie," Angew. Chem., no 707-19 11457) -,, A- ,>"".,.

(8) FLASCHM, H., A. J. BARNARD, JR., AND W. C. BROAD, "The EDTA Titration: Applications," Chemisl-Analyst, 46. 10612 (1957): ibid.. 47. 22-28. 52-56. 78-84. in . . . . . press (1958).

(9) PRIRIL, R., "Recent Advances in Chelatometry," Analyst, 83, 188-95 (1958).

(10) SCHWARZENBACH, G., "Chelate Formation as a Basis for Titration Processes," Anal. Chim. Acta, 7, 141-55 ( 1 45% ,-""-,.

(11) SCHWARZENBACH, G., 'The Complexones and Their Analytical Application," Analyst, 80, 713-29 (1955).

(12) J. T. BAKER CEEMICAL CO., "The EDTA Titration: Nature and Methods of End Point Detection." Phiui~s- burg, New Jersey, 1957,32 pp.

(13) THE Dow CEIEMICAL Co., "Keys to Chelation," Midland, Michiian, 1957.16 pp.

(14) ALROSE CEIEMIC~L Co., "Sequestrene," Providence, Rhode Island, 1952, 54 pp. [available from Geigy Industrial Chemicals, P. 0. Box 430, Yonkers, New York].

VOLUME 35, NO. 12, DECEMBER, 1958

Page 6: Johnston 1958

(15) SCKW~RZENBACE, G., "Nouvelles mdthodes de dosage de (17) BIEDERMANN, W., AND G. S~ARZENBACH, "Die kom- cehins cations mPtaIliques," Helv. Chim. Acfa, 29, 1338 plexometrisohe Titration der Erdalkelien und eiuiger (1946); U. S. patents 2,583,890 and 2,583,891 (1952). anderer Metalle mit Eriochromschwarz T," Chimia, 2 ,

(16) SCHWARZENBACH, G., W. BIEDERMANN, AND F. BANQERTER, 5S59 (1948). "Neue einfache Titriermethoden mr Beatimmung der (18) MARTELL, A. E., "The Behavior of Metal Complexes in Wasserhiirte," Heb'. Chim. Acta, 29, 811418 (1946). Aqueous Solutions," J. CHEM. EDUC., 29, 270-80 (1952).

JOURNAL OF CHEMICAL EDUCATION